The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing
Open accessAbstract
This study focused on the suitability of geopolymer mixes for extrusion-based additive manufacturing applications. Geopolymer mixes including alkaline potassium silicate activator with different molar ratios were prepared and evaluated for their rheological responses (e.g. yield stress, viscosity and thixotropy) that influenced their extrudability and buildability. Due to the low yield stress of geopolymers, nanoclay was introduced to enhance their thixotropy, which was assessed by structural breakdown and viscosity recovery tests. An activator-to-binder ratio of 0.35 and water-to-solid ratio of 0.30 were found to work well with a clay addition of 0.5% (i.e. by mass of total binder component). The addition of nanoclay led to an improvement in the rheological properties of geopolymer nanocomposites, which was attributed to the flocculation characteristic of the clay particles. A small-scale bathroom unit was printed by using the developed geopolymer nanocomposite, indicating the suitability of the proposed mix design to be used in 3D printing applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1209867 · Cited by 1,257
Mix design and fresh properties for high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Gibb, A. G. F., & Thorpe, T. (2012) · Materials and Structures · doi:10.1617/s11527-012-9828-z · Cited by 1,218
Rheological requirements for printable concretes
Roussel, N. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.005 · Cited by 1,203
3D printing trends in building and construction industry: a review
Tay, Y. W. D., Panda, B., Paul, S. C., Noor Mohamed, N. A., Tan, M. J., & Leong, K. F. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2017.1326724 · Cited by 868
Self-citationKazemian, A., Yuan, X., Cochran, E., & Khoshnevis, B. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.015 · Cited by 774
Effect of surface moisture on inter-layer strength of 3D printed concrete
Sanjayan, J., Nematollahi, B., Xia, M., & Marchment, T. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.232 · Cited by 713
Digital Concrete: Opportunities and Challenges
Wangler, T., Lloret, E., Reiter, L., Hack, N., Gramazio, F., Kohler, M., Bernhard, M., Dillenburger, B., Buchli, J., Roussel, N., et al. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.16 · Cited by 636
Role of water in the synthesis of calcined kaolin-based geopolymer
ZUHUA, Z., XIAO, Y., HUAJUN, Z., & YUE, C. (2009) · Applied Clay Science · doi:10.1016/j.clay.2008.09.003 · Cited by 621
Measurement of tensile bond strength of 3D printed geopolymer mortar
Panda, B., Paul, S. C., Mohamed, N. A. N., Tay, Y. W. D., & Tan, M. J. (2018) · Measurement · doi:10.1016/j.measurement.2017.08.051 · Cited by 592
Self-citationPanda, B., & Tan, M. J. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.03.031 · Cited by 520
Self-citationMarchon, D., Kawashima, S., Bessaies-Bey, H., Mantellato, S., & Ng, S. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.014 · Cited by 507
Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
Panda, B., Unluer, C., & Tan, M. J. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.10.002 · Cited by 482
Self-citationThe role of early age structural build-up in digital fabrication with concrete
Reiter, L., Wangler, T., Roussel, N., & Flatt, R. J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.011 · Cited by 432
Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
Panda, B., Ruan, S., Unluer, C., & Tan, M. J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.11.109 · Cited by 405
Self-citationNematollahi, B., Vijay, P., Sanjayan, J., Nazari, A., Xia, M., Nerella, V. N., & Mechtcherine, V. (2018) · Materials · doi:10.3390/ma11122352 · Cited by 326
Panda, B., Noor Mohamed, N. A., Paul, S. C., Bhagath Singh, G., Tan, M. J., & Šavija, B. (2019) · Materials · doi:10.3390/ma12132149 · Cited by 301
Self-citationSynthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing
Panda, B., Singh, G. B., Unluer, C., & Tan, M. J. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.02.185 · Cited by 254
Self-citationRavikumar, D., & Neithalath, N. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.03.006 · Cited by 244
Alghamdi, H., Nair, S. A. O., & Neithalath, N. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107634 · Cited by 227
An approach to develop printable strain hardening cementitious composites
Chaves Figueiredo, S., Romero Rodríguez, C., Ahmed, Z. Y., Bos, D. H., Xu, Y., Salet, T. M., Çopuroğlu, O., Schlangen, E., & Bos, F. P. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107651 · Cited by 211
Chen, Y., Chaves Figueiredo, S., Yalçinkaya, Ç., Çopuroğlu, O., Veer, F., & Schlangen, E. (2019) · Materials · doi:10.3390/ma12091374 · Cited by 167
Alkali-activated mortars: Workability and rheological behaviour
Alonso, M. M., Gismera, S., Blanco, M. T., Lanzón, M., & Puertas, F. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.020 · Cited by 160
Feasibility study on sustainable magnesium potassium phosphate cement paste for 3D printing
Weng, Y., Ruan, S., Li, M., Mo, L., Unluer, C., Tan, M. J., & Qian, S. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.05.053 · Cited by 141
Self-citationCharacterizations of flax fabric reinforced nanoclay-geopolymer composites
Assaedi, H. S., Shaikh, F. U. A., & Low, I. M. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.04.007 · Cited by 130
Palacios, M., Alonso, M. M., Varga, C., & Puertas, F. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.08.010 · Cited by 121
Thixotropy and interfacial bond strengths of polymer-modified printed mortars
Sakka, F. E., Assaad, J. J., Hamzeh, F., & Nakhoul, C. (2019) · Materials and Structures · doi:10.1617/s11527-019-1356-7 · Cited by 50
Cited by
Advances in geopolymer materials: A comprehensive review
Cong, P., & Cheng, Y. (2021) · Journal of Traffic and Transportation Engineering (English Edition) · doi:10.1016/j.jtte.2021.03.004 · Cited by 481
Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review
Mohan, M. K., Rahul, A. V., De Schutter, G., & Van Tittelboom, K. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103855 · Cited by 384
Zhao, J., Tong, L., Li, B., Chen, T., Wang, C., Yang, G., & Zheng, Y. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127085 · Cited by 369
Arunothayan, A. R., Nematollahi, B., Ranade, R., Bong, S. H., & Sanjayan, J. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119546 · Cited by 347
Recent Advances in 3D Printing of Structured Materials for Adsorption and Catalysis Applications.
Lawson, S., Li, X., Thakkar, H., Rownaghi, A. A., & Rezaei, F. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00060 · Cited by 341
Metadata
- Authors
- Panda, B., Unluer, C., & Tan, M. J.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2019-11
- Volume
- 176
- Pages
- 107290
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2968817102
- Cited by
- 285
- References
- 26
- FWCI
- 18.90
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.