The DOI matches its Crossref record; 66 of the 66 references it cites were found in a registry or an index.
A review on recycling and reuse methods for carbon fiber/glass fiber composites waste from wind turbine blades
Abstract
The development of novel strategies for recycling and reusing fiber composites is driven by various environmental and economic factors. Recycling materials mean that materials are processed with feasible processing methods or environment-friendly methods without deterioration of mechanical or physical performance enabling their reuse. Recycling end-of-life (EOL) waste of wind turbine (WT) blade composites is a critical challenge for renewable energy sector. This paper reviews various recycling methods (mechanical, thermal, chemical, and hybrid) and reuse of reclaimed fiber composites of carbon and glass fibers. Physical, mechanical, and chemical properties of recovered fibers and new composites (made of recovered fibers) have been discussed in detail. This paper aims to find out the optimum recycling process from existing recycling methods to recycle EOL waste of WT blades. Glass fibers (GFs) and carbon fibers (CFs) are energy-intensive to manufacture, which means these have high recycling capability in terms of the environment as well as an economic perspective. Challenges in the recycling of fibers have been identified from the available literature; future research possibilities with promising values of recovered fibers to reuse in some high-value structural applications have been highlighted.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Microwave assisted organic synthesis—a review
Lidström, P., Tierney, J., Wathey, B., & Westman, J. (2001) · Tetrahedron · doi:10.1016/s0040-4020(01)00906-1 · Cited by 2,678
Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications
Rajak, D., Pagar, D., Menezes, P., & Linul, E. (2019) · Polymers · doi:10.3390/polym11101667 · Cited by 1,706
Characterization and properties of natural fiber polymer composites: A comprehensive review
Sanjay, M. R., Madhu, P., Jawaid, M., Senthamaraikannan, P., Senthil, S., & Pradeep, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.101 · Cited by 1,652
Oliveux, G., Dandy, L. O., & Leeke, G. A. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.01.004 · Cited by 1,287
Recycling technologies for thermoset composite materials—current status
Pickering, S. J. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.05.030 · Cited by 1,278
Pimenta, S., & Pinho, S. T. (2011) · Waste Management · doi:10.1016/j.wasman.2010.09.019 · Cited by 967
Microwave-Assisted Preparation of Inorganic Nanostructures in Liquid Phase
Zhu, Y.-J., & Chen, F. (2014) · Chemical Reviews · doi:10.1021/cr400366s · Cited by 912
Recycling of composite materials
Yang, Y., Boom, R., Irion, B., van Heerden, D.-J., Kuiper, P., & de Wit, H. (2012) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/j.cep.2011.09.007 · Cited by 853
Materials for Wind Turbine Blades: An Overview
Mishnaevsky, L., Branner, K., Petersen, H., Beauson, J., McGugan, M., & Sørensen, B. (2017) · Materials · doi:10.3390/ma10111285 · Cited by 776
Pyrolysis technologies for municipal solid waste: A review
Chen, D., Yin, L., Wang, H., & He, P. (2014) · Waste Management · doi:10.1016/j.wasman.2014.08.004 · Cited by 674
Recent advances in low‐cost carbon fiber manufacture from lignin
Baker, D. A., & Rials, T. G. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39273 · Cited by 664
Corrosion in high-temperature and supercritical water and aqueous solutions: a review
Kritzer, P. (2004) · The Journal of Supercritical Fluids · doi:10.1016/s0896-8446(03)00031-7 · Cited by 660
Life cycle energy analysis of fiber-reinforced composites
Song, Y. S., Youn, J. R., & Gutowski, T. G. (2009) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.05.020 · Cited by 548
Naqvi, S. R., Prabhakara, H. M., Bramer, E. A., Dierkes, W., Akkerman, R., & Brem, G. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.04.013 · Cited by 484
Wind turbine blade recycling: Experiences, challenges and possibilities in a circular economy
Jensen, J. P., & Skelton, K. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.08.041 · Cited by 401
Recycling glass fiber thermoplastic composites from wind turbine blades
Cousins, D. S., Suzuki, Y., Murray, R. E., Samaniuk, J. R., & Stebner, A. P. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.10.286 · Cited by 383
Gartia, M. R., Misra, S. K., Ye, M., Schwartz-Duval, A., Plucinski, L., Zhou, X., Kellner, D., Labriola, L. T., & Pan, D. (2016) · Scientific Reports · doi:10.1038/srep20452 · Cited by 379
Witik, R. A., Payet, J., Michaud, V., Ludwig, C., & Månson, J.-A. E. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.07.024 · Cited by 376
Successful closed-loop recycling of thermoset composites
Palmer, J., Ghita, O. R., Savage, L., & Evans, K. E. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.02.002 · Cited by 363
Chemical recycling of plastics using sub- and supercritical fluids
Goto, M. (2009) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2008.10.011 · Cited by 328
Piñero-Hernanz, R., García‐Serna, J., Dodds, C., Hyde, J. R., Poliakoff, M., Cocero, M. J., Kingman, S., Pickering, S. J., & Lester, E. H. (2008) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2008.02.008 · Cited by 304
On the existence of and mechanism for microwave-specific reaction rate enhancement
Dudley, G. B., Richert, R., & Stiegman, A. E. (2015) · Chemical Science · doi:10.1039/c4sc03372h · Cited by 289
Glycolysis of poly(ethylene terephthalate) catalyzed by ionic liquids
Wang, H., Liu, Y., Li, Z., Zhang, X., Zhang, S., & Zhang, Y. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.01.025 · Cited by 284
Models for waste life cycle assessment: Review of technical assumptions
Gentil, E. C., Damgaard, A., Hauschild, M., Finnveden, G., Eriksson, O., Thorneloe, S., Kaplan, P. O., Barlaz, M., Muller, O., Matsui, Y., et al. (2010) · Waste Management · doi:10.1016/j.wasman.2010.06.004 · Cited by 280
Direct Printing of 1-D and 2-D Electronically Conductive Structures by Molten Lead-Free Solder
Wang, C.-H., Tsai, H.-L., & Hwang, W.-S. (2016) · Materials · doi:10.3390/ma10010001 · Cited by 271
Recycling of FRP composites: reusing fine GFRP waste in concrete mixtures
Correia, J. R., Almeida, N. M., & Figueira, J. R. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.05.018 · Cited by 261
Energy and environmental assessment and reuse of fluidised bed recycled carbon fibres
Meng, F., McKechnie, J., Turner, T. A., & Pickering, S. J. (2017) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2017.05.008 · Cited by 259
Morin, C., Loppinet-Serani, A., Cansell, F., & Aymonier, C. (2012) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2012.02.001 · Cited by 246
Kim, Y. N., Kim, Y.-O., Kim, S. Y., Park, M., Yang, B., Kim, J., & Jung, Y. C. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.01.026 · Cited by 236
Energy demand in mechanical recycling of glass fibre reinforced thermoset plastic composites
Shuaib, N. A., & Mativenga, P. T. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.01.070 · Cited by 218
Bai, Y., Wang, Z., & Feng, L. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.07.057 · Cited by 209
Xu, P., Li, J., & Ding, J. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.04.002 · Cited by 208
Duflou, J. R., Deng, Y., Van Acker, K., & Dewulf, W. (2012) · MRS Bulletin · doi:10.1557/mrs.2012.33 · Cited by 200
An Efficient Method of Recycling of CFRP Waste Using Peracetic Acid
Das, M., Chacko, R., & Varughese, S. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01456 · Cited by 200
Li, J., Xu, P.-L., Zhu, Y.-K., Ding, J.-P., Xue, L.-X., & Wang, Y.-Z. (2012) · Green Chemistry · doi:10.1039/c2gc36294e · Cited by 196
Wind energy research: State-of-the-art and future research directions
Willis, D. J., Niezrecki, C., Kuchma, D., Hines, E., Arwade, S. R., Barthelmie, R. J., DiPaola, M., Drane, P. J., Hansen, C. J., Inalpolat, M., et al. (2018) · Renewable Energy · doi:10.1016/j.renene.2018.02.049 · Cited by 195
An approach to chemical recycling of epoxy resin cured with amine using nitric acid
Dang, W., Kubouchi, M., Yamamoto, S., Sembokuya, H., & Tsuda, K. (2002) · Polymer · doi:10.1016/s0032-3861(02)00100-3 · Cited by 193
Recycling and reuse of composite materials for wind turbine blades: An overview
Chen, J., Wang, J., & Ni, A. (2019) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684419833470 · Cited by 184
Liu, Y., Liu, J., Jiang, Z., & Tang, T. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.12.028 · Cited by 183
Polysaccharide Based Scaffolds for Soft Tissue Engineering Applications
Tiwari, S., Patil, R., & Bahadur, P. (2018) · Polymers · doi:10.3390/polym11010001 · Cited by 183
Lester, E., Kingman, S., Wong, K. H., Rudd, C., Pickering, S., & Hilal, N. (2004) · Materials Research Bulletin · doi:10.1016/j.materresbull.2004.04.031 · Cited by 182
Yang, J., Liu, J., Liu, W., Wang, J., & Tang, T. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.01.017 · Cited by 179
Rahimizadeh, A., Kalman, J., Fayazbakhsh, K., & Lessard, L. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107101 · Cited by 169
Recycling of the fibrous fraction of reinforced thermoset composites
Kouparitsas, C. E., Kartalis, C. N., Varelidis, P. C., Tsenoglou, C. J., & Papaspyrides, C. D. (2002) · Polymer Composites · doi:10.1002/pc.10468 · Cited by 167
On the successful chemical recycling of carbon fiber/epoxy resin composites under the mild condition
Jiang, J., Deng, G., Chen, X., Gao, X., Guo, Q., Xu, C., & Zhou, L. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.08.007 · Cited by 166
Design Through the 12 Principles of Green Engineering
Anastas, P. T., & Zimmerman, J. B. (2007) · IEEE Engineering Management Review · doi:10.1109/emr.2007.4296421 · Cited by 161
Chemical recycling of glass fibre reinforced composites using subcritical water
Oliveux, G., Bailleul, J.-L., & Salle, E. L. G. L. (2012) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.06.008 · Cited by 160
Ribeiro, M. C. S., Castro, A. C. M., Silva, F. J. G., Santos, J. D., Meixedo, J. P., Fiúza, A., Dinis, M. D. L., & Alvim, M. R. (2013) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2013.10.001 · Cited by 155
Recycling of fiber reinforced plastics using depolymerization by solvothermal reaction with catalyst
Iwaya, T., Tokuno, S., Sasaki, M., Goto, M., & Shibata, K. (2007) · Journal of Materials Science · doi:10.1007/s10853-007-2017-8 · Cited by 135
Supercritical propanol, a possible route to composite carbon fibre recovery: A viability study
Hyde, J. R., Lester, E. H., Kingman, S., Pickering, S. J., & Wong, K. H. (2006) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.12.006 · Cited by 130
Highly efficient solvolysis of epoxy resin using poly(ethylene glycol)/NaOH systems
Yang, P., Zhou, Q., Yuan, X., van Kasteren, J. M. N., & Wang, Y. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.04.007 · Cited by 128
Microwave-Assisted Green Organic Synthesis
de la Hoz, A., Díaz‐Ortiz, Á., & Prieto, P. (2016) · Royal Society of Chemistry eBooks · doi:10.1039/9781782623632-00001 · Cited by 108
Fluidized bed pyrolysis of a recycled polyethylene
Mastellone, M. L., Perugini, F., Ponte, M., & Arena, U. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00052-6 · Cited by 103
Beauson, J., Lilholt, H., & Brøndsted, P. (2014) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684414537131 · Cited by 99
A techno-economic comparison of fluidized bed gasification of two mixed plastic wastes
Arena, U., Gregorio, F. D., Amorese, C., & Mastellone, M. L. (2011) · Waste Management · doi:10.1016/j.wasman.2011.02.004 · Cited by 93
Evolution of microwave irradiation and its application in green chemistry and biosciences
Bassyouni, F. A., Abu‐Bakr, S. M., & Abdel‐Rehim, M. (2011) · Research on Chemical Intermediates · doi:10.1007/s11164-011-0348-1 · Cited by 92
Thermoset composite recycling – Driving forces, development, and evolution of new opportunities
OVERCASH, M. R., Twomey, J. M., Asmatulu, E., Vozzola, E., & Griffing, E. (2017) · Journal of Composite Materials · doi:10.1177/0021998317720000 · Cited by 91
Development of recycled carbon fibre moulding compounds – Preparation of waste composites
Turner, T. A., Pickering, S. J., & Warrior, N. A. (2010) · Composites Part B Engineering · doi:10.1016/j.compositesb.2010.11.010 · Cited by 89
Mechanical studies of single glass fibres recycled from hydrolysis process using sub-critical water
Kao, C.-C., Ghita, O., Hallam, K., Heard, P. J., & Evans, K. E. (2011) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.11.011 · Cited by 85
Zabihi, O., Ahmadi, M., Liu, C., Mahmoodi, R., Li, Q., Ferdowsi, M. R. G., & Naebe, M. (2020) · Sustainability · doi:10.3390/su12020641 · Cited by 80
Supercritical Water: A Green Solvent: Properties and Uses
Marcus, Y. (2012) · Wiley eBooks · doi:10.1002/9781118310250 · Cited by 78
Investigation of turbine blade failure in a thermal power plant
Ziegler, D., Puccinelli, M., Bergallo, B., & Picasso, A. (2013) · Case Studies in Engineering Failure Analysis · doi:10.1016/j.csefa.2013.07.002 · Cited by 58
FRPs — The Environmental Agenda
Halliwell, S. (2010) · Advances in Structural Engineering · doi:10.1260/1369-4332.13.5.783 · Cited by 47
Degradation of crosslinked unsaturated polyesters in sub-critical water
Suyama, K., Kubota, M., Shirai, M., & Yoshida, H. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2006.10.008 · Cited by 41
Suyama, K., Kubota, M., Shirai, M., & Yoshida, H. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.05.034 · Cited by 34
Supercritical Water. A Green Solvent: Properties and Uses. Edited by Yizhak Marcus.
Vogel, G. H. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201300111 · Cited by 10
Cited by
Past, present and future prospective of global carbon fibre composite developments and applications
Zhang, J., Lin, G., Vaidya, U., & Wang, H. (2023) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2022.110463 · Cited by 1,026
Catalytic disconnection of C–O bonds in epoxy resins and composites
Ahrens, A., Bonde, A., Sun, H., Wittig, N. K., Hammershøj, H. C. D., Batista, G. M. F., Sommerfeldt, A., Frølich, S., Birkedal, H., & Skrydstrup, T. (2023) · Nature · doi:10.1038/s41586-023-05944-6 · Cited by 368
Khalid, M. Y., Arif, Z. U., Ahmed, W., & Arshad, H. (2022) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2021.e00382 · Cited by 314
Dai, L., Hu, X., Zhao, C., Zhou, H., Zhang, Z., Wang, Y., Ma, S., Liu, X., Li, X., & Shu, X. (2024) · Waste Management · doi:10.1016/j.wasman.2024.09.002 · Cited by 16
Metadata
- Authors
- Rani, M., Choudhary, P., Krishnan, V., & Zafar, S.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2021-06
- Volume
- 215
- Pages
- 108768
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W3134432227
- Cited by
- 521
- References
- 66
- FWCI
- 27.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.