The DOI matches its Crossref record; 79 of the 79 references it cites were found in a registry or an index.
A critical review of geopolymer properties for structural fire-resistance applications
Abstract
Abstract Protection of structures from fire is of extreme importance. Geopolymer is a novel material that has wide-ranging applications, and this review article focuses on assessing the potential of geopolymers towards enhancing the structural fire resistance by critically reviewing its properties subjected to elevated temperature exposure. The properties of geopolymers are categorized into three scales, namely, micro-scale, meso-scale and macro-scale, and are discussed at length. It is noted that geopolymers are chemically stable and do not undergo breakdown of chemical structure in contrary to OPC hydration products. Thermal deformations occurring in geopolymers, which cause macro-cracking, are discussed. Compressive strength of geopolymers is observed to be affected by microstructural changes (including crack formation, pore structure changes, densification, sintering, and melting) and phase composition changes (such as growth or destruction of crystals and transformations in geopolymer paste). Geopolymer-based binders show inherently superior fire resistance as compared to Portland cement-based binders. However, it requires careful mix design, to achieve substantial chemical stability, low volume changes, strength endurance, and spalling resistance. Factors such as choice of precursor, use of aggregates, total alkali content in geopolymer, water content, etc. are critical and should be controlled. The influence of these factors is discussed at length in this article. The current applications of geopolymers for heat and fire resistance have also been briefly presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Geopolymers: Inorganic polymeric new materials
Davidovits, J. (1991) · Journal of Thermal Analysis · doi:10.1007/bf01912193 · Cited by 4,251
The geopolymerisation of alumino-silicate minerals
Xu, H., & Van Deventer, J. S. J. (2000) · International Journal of Mineral Processing · doi:10.1016/s0301-7516(99)00074-5 · Cited by 1,876
Geopolymer Chemistry and Applications
Davidovits, J. (2008) · CERN Document Server (European Organization for Nuclear Research) · Cited by 1,692
Geopolymers and geopolymeric materials
Davidovits, J. (1989) · Journal of Thermal Analysis · doi:10.1007/bf01904446 · Cited by 1,148
Effect of elevated temperatures on geopolymer paste, mortar and concrete
Kong, D. L. Y., & Sanjayan, J. G. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.10.017 · Cited by 985
Fire-resistant geopolymer produced by granulated blast furnace slag
Cheng, T. W., & Chiu, J. P. (2003) · Minerals Engineering · doi:10.1016/s0892-6875(03)00008-6 · Cited by 833
Innovation in use and research on cementitious material
Scrivener, K. L., & Kirkpatrick, R. J. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.09.025 · Cited by 828
Kong, D. L. Y., Sanjayan, J. G., & Sagoe-Crentsil, K. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.08.021 · Cited by 806
Effect of fire on concrete and concrete structures
Khoury, G. A. (2000) · Progress in Structural Engineering and Materials · doi:10.1002/pse.51 · Cited by 802
Characterisation of fly ashes. Potential reactivity as alkaline cements☆
Fernández-Jiménez, A., & Palomo, A. (2003) · Fuel · doi:10.1016/s0016-2361(03)00194-7 · Cited by 690
Geopolymers : structure, processing, properties and industrial applications
Provis, J. L., & van Deventer, J. S. J. (2009) · Cited by 674
Compressive strength of concrete at high temperatures: a reassessment
Khoury, G. A. (1992) · Magazine of Concrete Research · doi:10.1680/macr.1992.44.161.291 · Cited by 602
Cement industry greenhouse gas emissions – management options and abatement cost
Kajaste, R., & Hurme, M. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.07.055 · Cited by 584
Thermal behaviour of inorganic geopolymers and composites derived from sodium polysialate
Barbosa, V. F. F., & MacKenzie, K. J. D. (2003) · Materials Research Bulletin · doi:10.1016/s0025-5408(02)01022-x · Cited by 542
Physical evolution of Na-geopolymer derived from metakaolin up to 1000 °C
Duxson, P., Lukey, G. C., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0535-4 · Cited by 500
Thermal behaviour of geopolymers prepared using class F fly ash and elevated temperature curing
Bakharev, T. (2006) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.03.022 · Cited by 494
Alkaline Activation of Fly Ashes: NMR Study of the Reaction Products
Palomo, Á., Alonso, S., Fernandez‐Jiménez, A., Sobrados, I., & Sanz, J. (2004) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2004.01141.x · Cited by 463
Geopolymer mortars as sustainable repair material: A comprehensive review
Fahim Huseien, G., Mirza, J., Ismail, M., Ghoshal, S. K., & Abdulameer Hussein, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.076 · Cited by 462
Effect of fire exposure on cracking, spalling and residual strength of fly ash geopolymer concrete
Sarker, P. K., Kelly, S., & Yao, Z. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.06.059 · Cited by 438
Abdulkareem, O. A., Mustafa Al Bakri, A. M., Kamarudin, H., Khairul Nizar, I., & Saif, A. A. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.09.047 · Cited by 419
Thermal evolution of metakaolin geopolymers: Part 1 – Physical evolution
Duxson, P., Lukey, G. C., & van Deventer, J. S. J. (2006) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2006.09.019 · Cited by 358
Alkaline Activation of Metakaolin: Effect of Calcium Hydroxide in the Products of Reaction
Granizo, M. L., Alonso, S., Blanco‐Varela, M. T., & Palomo, A. (2002) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2002.tb00070.x · Cited by 357
Synthesis and thermal behaviour of potassium sialate geopolymers
Barbosa, V. F. F., & MacKenzie, K. J. D. (2003) · Materials Letters · doi:10.1016/s0167-577x(02)01009-1 · Cited by 348
Fire-resistant Aluminosilicate Composites
Lyon, R. E., Balaguru, P., Foden, A. J., Sorathia, U., Davidovits, J., & Davidovics, M. (1997) · Fire and Materials · doi:10.1002/(sici)1099-1018(199703)21:2<67::aid-fam596>3.0.co;2-n · Cited by 343
Dombrowski, K., Buchwald, A., & Weil, M. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0532-7 · Cited by 336
Atiş, C. D., Görür, E. B., Karahan, O., Bilim, C., İlkentapar, S., & Luga, E. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.089 · Cited by 329
Chan, Y. N., Luo, X., & Sun, W. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00240-9 · Cited by 327
Coal fly ash as raw material for the manufacture of geopolymer-based products
Andini, S., Cioffi, R., Colangelo, F., Grieco, T., Montagnaro, F., & Santoro, L. (2008) · Waste Management · doi:10.1016/j.wasman.2007.02.001 · Cited by 319
Formation of Ceramics from Metakaolin‐Based Geopolymers. Part II: K‐Based Geopolymer
Bell, J. L., Driemeyer, P. E., & Kriven, W. M. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02922.x · Cited by 299
Development of metakaolin–fly ash based geopolymers for fire resistance applications
Zhang, H. Y., Kodur, V., Qi, S. L., Cao, L., & Wu, B. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.01.040 · Cited by 281
Thermal analysis of geopolymer pastes synthesised from five fly ashes of variable composition
Rickard, W. D. A., Temuujin, J., & van Riessen, A. (2012) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2012.05.032 · Cited by 278
Yermak, N., Pliya, P., Beaucour, A.-L., Simon, A., & Noumowé, A. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.11.120 · Cited by 266
Factors affecting the performance of metakaolin geopolymers exposed to elevated temperatures
Kong, D. L. Y., Sanjayan, J. G., & Sagoe-Crentsil, K. (2008) · Journal of Materials Science · doi:10.1007/s10853-007-2205-6 · Cited by 251
Rickard, W. D. A., Williams, R., Temuujin, J., & van Riessen, A. (2011) · Materials Science and Engineering A · doi:10.1016/j.msea.2011.01.005 · Cited by 243
The “Chunnel” Fire. I: Chemoplastic Softening in Rapidly Heated Concrete
Ulm, F.-J., Coussy, O., & Bažant, Z. P. (1999) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(1999)125:3(272 · Cited by 236
Geopolymer and Portland cement concretes in simulated fire
Zhao, R., & Sanjayan, J. G. (2011) · Magazine of Concrete Research · doi:10.1680/macr.9.00110 · Cited by 235
The thermal evolution of metakaolin geopolymers: Part 2 – Phase stability and structural development
Duxson, P., Lukey, G. C., & van Deventer, J. S. J. (2007) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2007.02.050 · Cited by 229
Porous biomass fly ash-based geopolymers with tailored thermal conductivity
Novais, R. M., Buruberri, L. H., Ascensão, G., Seabra, M. P., & Labrincha, J. A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.01.083 · Cited by 225
Mechanical and thermal properties of fly ash based geopolymers
Fan, F., Liu, Z., Xu, G., Peng, H., & Cai, C. S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.11.023 · Cited by 224
Pan, Z., Sanjayan, J. G., & Rangan, B. V. (2009) · Journal of Materials Science · doi:10.1007/s10853-009-3243-z · Cited by 215
Arıoğlu Akan, M. Ö., Dhavale, D. G., & Sarkis, J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.07.225 · Cited by 210
Performance of fibre reinforced, low density metakaolin geopolymers under simulated fire conditions
Rickard, W. D. A., Vickers, L., & van Riessen, A. (2013) · Applied Clay Science · doi:10.1016/j.clay.2012.10.006 · Cited by 201
Rahier, H., Simons, W., Van Mele, B., & Biesemans, M. (1997) · Journal of Materials Science · doi:10.1023/a:1018563914630 · Cited by 200
Lahoti, M., Wong, K. K., Yang, E.-H., & Tan, K. H. (2018) · Ceramics International · doi:10.1016/j.ceramint.2017.12.226 · Cited by 196
Self-citationMasi, G., Rickard, W. D. A., Bignozzi, M. C., & van Riessen, A. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.02.023 · Cited by 194
Effect of temperature on bond characteristics of geopolymer concrete
Zhang, H. Y., Kodur, V., Wu, B., Yan, J., & Yuan, Z. S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.12.043 · Cited by 192
Activating solution chemistry for geopolymers
Provis, J. L. (2009) · Geopolymers · doi:10.1533/9781845696382.1.50 · Cited by 184
Compressive strength of fly‐ash‐based geopolymer concrete at elevated temperatures
Shaikh, F. U. A., & Vimonsatit, V. (2014) · Fire and Materials · doi:10.1002/fam.2240 · Cited by 182
Behavior of combined fly ash/slag‐based geopolymers when exposed to high temperatures
Guerrieri, M., & Sanjayan, J. G. (2010) · Fire and Materials · doi:10.1002/fam.1014 · Cited by 168
Lahoti, M., Wong, K. K., Tan, K. H., & Yang, E.-H. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.05.023 · Cited by 167
Self-citationRickard, W. D. A., Riessen, A. V., & Walls, P. (2010) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2008.02328.x · Cited by 166
Robayo-Salazar, R. A., Mejía-Arcila, J. M., & Mejía de Gutiérrez, R. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.07.243 · Cited by 164
Provis, J. L., & van Deventer, J. S. J. (2009) · Elsevier eBooks · doi:10.1533/9781845696382.1 · Cited by 150
Effects of calcium on setting mechanism of metakaolin‐based geopolymer
Chen, X., Sutrisno, A., & Struble, L. J. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.15249 · Cited by 145
Kamseu, E., Rizzuti, A., Leonelli, C., & Perera, D. S. (2010) · Journal of Materials Science · doi:10.1007/s10853-009-4108-1 · Cited by 137
Directed synthesis of alkaline aluminosilicate minerals in a geocement matrix
Krivenko, P. V., & Kovalchuk, G. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0528-3 · Cited by 135
High‐Temperature Resistance in Alkali‐Activated Cement
Fernández‐Jiménez, A., Pastor, J. Y., Martín, A., et al. (2010) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2010.03887.x · Cited by 123
Thermal cycling stability of fly ash based geopolymer mortars
Colangelo, F., Cioffi, R., Roviello, G., Capasso, I., Caputo, D., Aprea, P., Liguori, B., & Ferone, C. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.06.029 · Cited by 123
Performance of solid and cellular structured fly ash geopolymers exposed to a simulated fire
Rickard, W. D. A., & van Riessen, A. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.09.002 · Cited by 121
Fire resistant melamine based organic-geopolymer hybrid composites
Roviello, G., Ricciotti, L., Ferone, C., Colangelo, F., & Tarallo, O. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.03.007 · Cited by 120
Rickard, W. D. A., Kealley, C. S., & van Riessen, A. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.13370 · Cited by 112
Pan, Z., Sanjayan, J., & Kong, D. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.04.120 · Cited by 110
Messina, Ferone, C., Colangelo, Roviello, & Cioffi, R. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.08.012 · Cited by 93
Young's modulus of cement paste at elevated temperatures
Odelson, J. B., Kerr, E. A., & Vichit‐Vadakan, W. (2006) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.11.006 · Cited by 88
Aspects of the deformational behaviour of alkali activated fly ash concrete at elevated temperatures
Junaid, M. T., Khennane, A., Kayali, O., Sadaoui, A., Picard, D., & Fafard, M. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.01.026 · Cited by 88
Messina, F., Ferone, C., Colangelo, F., & Cioffi, R. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.02.069 · Cited by 84
Alkali activated lightweight mortars for passive fire protection: A preliminary study
Carabba, L., Moricone, R., Scarponi, G. E., Tugnoli, A., & Bignozzi, M. C. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.11.005 · Cited by 78
Strategies to control the high temperature shrinkage of fly ash based geopolymers
Vickers, L., Rickard, W. D. A., & van Riessen, A. (2014) · Thermochimica Acta · doi:10.1016/j.tca.2014.01.020 · Cited by 77
Facile preparation of slag or fly ash geopolymer composite coatings with flame resistance
Wang, Y., & Zhao, J. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.097 · Cited by 76
Fire resistance of geopolymer concrete produced from Elazığ ferrochrome slag
Türkmen, İ., Karakoç, M. B., Kantarcı, F., Maraş, M. M., & Demirboğa, R. (2016) · Fire and Materials · doi:10.1002/fam.2348 · Cited by 62
Fire-resistant geopolymer bricks synthesized from high-calcium fly ash with outdoor heat exposure
Chindaprasirt, P., & Rattanasak, U. (2018) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-018-1532-4 · Cited by 58
Ali, A. Z. M., Sanjayan, J., & Guerrieri, M. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.01.099 · Cited by 57
Thermal properties of geopolymers
van Riessen, A., Rickard, W. D. A., & Sanjayan, J. (2009) · Elsevier eBooks · doi:10.1533/9781845696382.2.315 · Cited by 53
Thermal Performance Modeling of Geopolymer Concrete
Aslani, F. (2015) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001291 · Cited by 50
Specimens size, aggregate size, and aggregate type effect on spalling of concrete in fire
Ali, A. Z. M., Sanjayan, J., & Guerrieri, M. (2017) · Fire and Materials · doi:10.1002/fam.2457 · Cited by 48
Producing fire- and heat-resistant geopolymers
Kovalchuk, G., & Krienko, P. V. (2009) · Elsevier eBooks · doi:10.1533/9781845696382.2.227 · Cited by 44
In Situ Elevated Temperature Testing of Fly Ash Based Geopolymer Composites
Vickers, L., Pan, Z., Tao, Z., & van Riessen, A. (2016) · Materials · doi:10.3390/ma9060445 · Cited by 36
Behaviour of Fly Ash-Based Geopolymer Panels Under Fire
Galiano, Y. L., Leiva, C., Arenas, C., Torralvo, F. A., Vilches, L. F., Fernández‐Pereira, C., & Villegas, R. (2017) · Waste and Biomass Valorization · doi:10.1007/s12649-016-9803-y · Cited by 24
Cited by
Advances in geopolymer materials: A comprehensive review
Cong, P., & Cheng, Y. (2021) · Journal of Traffic and Transportation Engineering (English Edition) · doi:10.1016/j.jtte.2021.03.004 · Cited by 481
Zhao, J., Tong, L., Li, B., Chen, T., Wang, C., Yang, G., & Zheng, Y. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127085 · Cited by 369
John, S. K., Nadir, Y., & Girija, K. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122443 · Cited by 290
Factors Affecting the Compressive Strength of Geopolymers: A Review
Castillo, H., Collado, H., Droguett, T., Sánchez, S., Vesely, M., Garrido, P., & Palma, S. (2021) · Minerals · doi:10.3390/min11121317 · Cited by 231
ZHOU, S., ZHU, X., LU, C., & LI, F. (2022) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2020.06.014 · Cited by 71
Metadata
- Authors
- Lahoti, M., Tan, K. H., & Yang, E.-H.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 221
- Pages
- 514-526
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2950754717
- Cited by
- 431
- References
- 79
- FWCI
- 28.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.