The DOI matches its Crossref record; 75 of the 75 references it cites were found in a registry or an index.
Geopolymers as an alternative to Portland cement: An overview
Abstract
Abstract Portland cement manufacture emits 5–7% CO2, which is responsible for global warming. Geopolymers minimize CO2 emission and may be a partial alternative to Portland cement in the building industry. The geopolymer technology gives solution to the utilization of industrial byproducts (waste) containing aluminosilicate phases with little negative impact on environment. Geopolymer cements are mainly produced by using secondary raw materials such as fly ash, metakaolin, calcined clays, zeolite etc. by the activation of alkali/alkali silicate solutions. Combination of different source materials containing aluminosilicate and alkali solutions with optimization of curing temperature, alkali concentrations, additives, Na2O/SiO2 ratio etc. gives geopolymer cements of high mechanical and durability properties. Due to their high mechanical properties and environmental benefit, geopolymer cement and concrete appear as a future prospective construction material and have applications in different areas.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
Turner, L. K., & Collins, F. G. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.01.023 · Cited by 2,411
Palomo, A., Grutzeck, M. W., & Blanco, M. T. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00243-9 · Cited by 2,319
Geopolymer Chemistry and Applications
Davidovits, J. (2008) · CERN Document Server (European Organization for Nuclear Research) · Cited by 1,692
Geopolymer concrete: A review of some recent developments
Singh, B., Ishwarya, G., Gupta, M., & Bhattacharyya, S. K. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.03.036 · Cited by 1,484
On the Development of Fly Ash-Based Geopolymer Concrete
(2004) · ACI Materials Journal · doi:10.14359/13485 · Cited by 1,254
Barbosa, V. F. F., MacKenzie, K. J. D., & Thaumaturgo, C. (2000) · International Journal of Inorganic Materials · doi:10.1016/s1466-6049(00)00041-6 · Cited by 1,128
Geopolymeric materials prepared using Class F fly ash and elevated temperature curing
Bakharev, T. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.06.031 · Cited by 946
The mechanical properties of fly ash-based geopolymer concrete with alkaline activators
Ryu, G. S., Lee, Y. B., Koh, K. T., & Chung, Y. S. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.05.069 · Cited by 927
Geopolymer foam concrete: An emerging material for sustainable construction
Zhang, Z., Provis, J. L., Reid, A., & Wang, H. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.01.081 · Cited by 879
Technical and commercial progress in the adoption of geopolymer cement
Van Deventer, J. S. J., Provis, J. L., & Duxson, P. (2012) · Minerals Engineering · doi:10.1016/j.mineng.2011.09.009 · Cited by 820
Structure and properties of clay-based geopolymer cements: A review
Liew, Y.-M., Heah, C.-Y., Mohd Mustafa, A. B., & Kamarudin, H. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.08.002 · Cited by 574
Part, W. K., Ramli, M., & Cheah, C. B. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.12.065 · Cited by 525
Geopolymer mortars as sustainable repair material: A comprehensive review
Fahim Huseien, G., Mirza, J., Ismail, M., Ghoshal, S. K., & Abdulameer Hussein, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.076 · Cited by 462
Mechanical and microstructural properties of alkali-activated fly ash geopolymers
Komljenović, M., Baščarević, Z., & Bradić, V. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.04.064 · Cited by 446
In Situ ATR-FTIR Study of the Early Stages of Fly Ash Geopolymer Gel Formation
Rees, C. A., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007) · Langmuir · doi:10.1021/la701185g · Cited by 411
An overview of geopolymers derived from industrial by-products
Mehta, A., & Siddique, R. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.09.136 · Cited by 391
Processing, properties and applications of highly porous geopolymers: A review
Bai, C., & Colombo, P. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.05.219 · Cited by 391
Saha, S., & Rajasekaran, C. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.139 · Cited by 380
Behavior of low-calcium fly and bottom ash-based geopolymer concrete cured at ambient temperature
Xie, T., & Ozbakkaloglu, T. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.01.031 · Cited by 344
Tchakouté, H. K., Rüscher, C. H., Kong, S., Kamseu, E., & Leonelli, C. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.184 · Cited by 335
Incorporation of nano-materials in cement composite and geopolymer based paste and mortar – A review
Sumesh, M., Alengaram, U. J., Jumaat, M. Z., Mo, K. H., & Alnahhal, M. F. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.206 · Cited by 315
Review of mechanical properties of short fibre reinforced geopolymer composites
Shaikh, F. U. A. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.01.026 · Cited by 313
Potential of geopolymer technology towards green buildings and sustainable cities
Komnitsas, K. A. (2011) · Procedia Engineering · doi:10.1016/j.proeng.2011.11.2108 · Cited by 298
Microstructural and morphological evolution of fly ash based geopolymers
Nath, S. K., Maitra, S., Mukherjee, S., & Kumar, S. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.106 · Cited by 290
Wetzel, A., & Middendorf, B. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.03.023 · Cited by 286
Self-citationGeopolymeric adsorbents from fly ash for dye removal from aqueous solution
Li, L., Wang, S., & Zhu, Z. (2006) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2006.03.062 · Cited by 282
Biomass fly ash geopolymer monoliths for effective methylene blue removal from wastewaters
Novais, R. M., Ascensão, G., Tobaldi, D. M., Seabra, M. P., & Labrincha, J. A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.078 · Cited by 270
Structural performance of nano-silica modified fly-ash based geopolymer concrete
Adak, D., Sarkar, M., & Mandal, S. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.12.111 · Cited by 264
Rahier, H., Van Mele, B., Biesemans, M., Wastiels, J., & Wu, X. (1996) · Journal of Materials Science · doi:10.1007/bf00355128 · Cited by 256
Duan, P., Yan, C., Zhou, W., Luo, W., & Shen, C. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.03.009 · Cited by 252
Arbi, K., Nedeljković, M., Zuo, Y., & Ye, G. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b00559 · Cited by 244
Reaction mechanism, kinetics and high temperature transformations of geopolymers
Rahier, H., Wastiels, J., Biesemans, M., Willlem, R., Assche, G. V., & Mele, B. V. (2006) · Journal of Materials Science · doi:10.1007/s10853-006-0568-8 · Cited by 236
Solid-state conversion of fly ash to effective adsorbents for Cu removal from wastewater
Wang, S., Li, L., & Zhu, Z. H. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.06.018 · Cited by 220
Sufian Badar, M., Kupwade-Patil, K., Bernal, S. A., Provis, J. L., & Allouche, E. N. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.03.015 · Cited by 206
Cho, Y.-K., Yoo, S.-W., Jung, S.-H., Lee, K.-M., & Kwon, S.-J. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.004 · Cited by 206
Rahier, H., Simons, W., Van Mele, B., & Biesemans, M. (1997) · Journal of Materials Science · doi:10.1023/a:1018563914630 · Cited by 200
Development of ultra-high-performance geopolymer concrete
Ambily, P. S., Ravisankar, K., Umarani, C., Dattatreya, J. K., & Iyer, N. R. (2014) · Magazine of Concrete Research · doi:10.1680/macr.13.00057 · Cited by 193
Mechanical properties of alkali activated flyash/Kaolin based geopolymer concrete
Okoye, F. N., Durgaprasad, J., & Singh, N. B. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.009 · Cited by 179
Self-citationPhysical and mechanical properties of lightweight aerated geopolymer
Sanjayan, J. G., Nazari, A., Chen, L., & Nguyen, G. H. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.01.043 · Cited by 176
Salih, M. A., Ali, A. A. A., & Farzadnia, N. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.05.031 · Cited by 175
Geopolymer synthetized from bottom coal ash and calcined paper sludge
Antunes Boca Santa, R. A., Bernardin, A. M., Riella, H. G., & Kuhnen, N. C. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.05.017 · Cited by 169
Effect of the reactivity of alkaline solution and metakaolin on geopolymer formation
Gharzouni, A., Joussein, E., Samet, B., Baklouti, S., & Rossignol, S. (2015) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2014.12.021 · Cited by 168
A sustainable calcined water treatment sludge and rice husk ash geopolymer
Nimwinya, E., Arjharn, W., Horpibulsuk, S., Phoo-ngernkham, T., & Poowancum, A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.01.060 · Cited by 160
Arcila, J. M. M., de Gutiérrez, R. M., & Montes, C. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.01.057 · Cited by 158
Huseien, G. F., Ismail, M., Khalid, N. H. A., Hussin, M. W., & Mirza, J. (2018) · Alexandria Engineering Journal · doi:10.1016/j.aej.2018.07.011 · Cited by 146
Phosphate-based geopolymer: Formation mechanism and thermal stability
Wang, Y., Dai, J., Ding, Z., & Xu, W.-T. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.01.022 · Cited by 144
Alomayri, T. S. (2019) · Journal of Building Engineering · doi:10.1016/j.jobe.2019.100788 · Cited by 143
Walkley, B., Rees, G. J., Nicolas, R. S., van Deventer, J. S. J., Hanna, J. V., & Provis, J. L. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b00259 · Cited by 140
Ranjbar, N., Mehrali, M., Maheri, M. R., & Mehrali, M. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.05.010 · Cited by 138
Development of a high strength fly ash-based geopolymer in short time by using microwave curing
Graytee, A., Sanjayan, J., & Nazari, A. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.02.001 · Cited by 134
Xie, J., & Kayali, O. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.06.067 · Cited by 128
Yuan, J., He, P., Jia, D., Yang, C., Zhang, Y., Yan, S. M., Yang, Z., Duan, X., Wang, S., & Zhou, Y. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.07.139 · Cited by 125
Geopolymer concrete for environmental protection
Rangan, B. V. (2014) · eSpace (Curtin University) · Cited by 120
New synthesis method for the production of coal fly ash-based foamed geopolymers
Böke, N., Birch, G. D., Nyale, S. M., & Petrik, L. F. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.07.041 · Cited by 120
Lecomte, I., Liégeois, M., Rulmont, A., Cloots, R., & Maseri, F. (2003) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2003.0360 · Cited by 117
Utilization of some industrial wastes for eco-friendly cement production
El-Gamal, S. M. A., & Selim, F. A. (2017) · Sustainable materials and technologies · doi:10.1016/j.susmat.2017.03.001 · Cited by 107
Zhang, M., Deskins, N. A., Zhang, G., Cygan, R. T., & Tao, M. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b00697 · Cited by 105
Suwan, T., & Fan, M. (2016) · Materials and Manufacturing Processes · doi:10.1080/10426914.2016.1198013 · Cited by 103
Role of alkali concentration on reaction kinetics of fly ash geopolymerization
Nath, S. K., & Kumar, S. (2018) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2018.11.007 · Cited by 87
Development of a High Strength Geopolymer by Novel Solar Curing
Dong, M., Feng, W., Elchalakani, M., Li, G., Karrech, A., & May, E. F. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.05.173 · Cited by 85
Baščarević, Z., Komljenović, M. M., Miladinović, Z. P., et al. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.12.067 · Cited by 81
In situ fabrication and characterization of graphene/geopolymer composites
Yan, S. M., He, P., Jia, D., Yang, Z., Duan, X., Wang, S., & Zhou, Y. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.05.075 · Cited by 79
Fire Resistant Properties of Alumino Silicate Geopolymer cement Mortars
Saxena, S. K., Kumar, M., & Singh, N. B. (2017) · Materials Today Proceedings · doi:10.1016/j.matpr.2017.06.018 · Cited by 75
Self-citationInterplay between silicate and hydroxide ions during geopolymerization
Aupoil, J., Champenois, J., de Lacaillerie, J.-B. D., et al. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.09.012 · Cited by 72
Adak, D., Sarkar, M., Maiti, M., Tamang, A., Mandal, S., & Chattopadhyay, B. (2015) · RSC Advances · doi:10.1039/c5ra12776a · Cited by 70
Structural Evolution of Fly Ash Based Geopolymers in Alkaline Environments
Sindhunata, Provis, J. L., Lukey, G. C., Xu, H., & van Deventer, J. S. J. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0707671 · Cited by 68
Falah, M., & MacKenzie, K. J. D. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.07.198 · Cited by 57
Impact of aluminum on the structure of geopolymers from the early stages to consolidated material
Benavent, V., Steins, P., Sobrados, I., Sanz, J., Lambertin, D., Frizon, F., Rossignol, S., & Poulesquen, A. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.09.009 · Cited by 57
Hafid, K. E., Hajjaji, M., & Hafid, H. E. (2017) · Journal of Building Engineering · doi:10.1016/j.jobe.2017.04.012 · Cited by 53
Esaifan, M., Khoury, H. N., Aldabsheh, I., Rahier, H., Hourani, M. K., & Wastiels, J. (2016) · Applied Clay Science · doi:10.1016/j.clay.2016.03.026 · Cited by 50
Superplasticizer Addition to Carbon Fly Ash Geopolymers Activated at Room Temperature
Carabba, L., Manzi, S., & Bignozzi, M. C. (2016) · Materials · doi:10.3390/ma9070586 · Cited by 43
Studies on fly ash based geopolymeric material for coating on mild steel by paint brush technique
Deshmukh, K., Parsai, R., Anshul, A., Singh, A. K., Bharadwaj, P., Gupta, R., Mishra, D., & Amritphale, S. S. (2017) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2017.03.002 · Cited by 35
Effects of seeding nucleation agent on geopolymerization process of fly-ash geopolymer
Prasittisopin, L., & Sereewatthanawut, I. (2017) · Frontiers of Structural and Civil Engineering · doi:10.1007/s11709-016-0373-7 · Cited by 32
Synthesis and characterization of geopolymers for infrastructural applications
He, J. X. (2012) · Louisiana State University · doi:10.31390/gradschool_dissertations.164 · Cited by 23
Cited by
Amran, M., Debbarma, S., & Ozbakkaloglu, T. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121857 · Cited by 532
de Brito, J., & Kurda, R. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123558 · Cited by 436
Zhao, J., Tong, L., Li, B., Chen, T., Wang, C., Yang, G., & Zheng, Y. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127085 · Cited by 369
Geopolymer concrete as sustainable material: A state of the art review
Farooq, F., Jin, X., Faisal Javed, M., Akbar, A., Izhar Shah, M., Aslam, F., & Alyousef, R. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124762 · Cited by 344
Long-term durability properties of geopolymer concrete: An in-depth review
Amran, M., Al-Fakih, A., Chu, S. H., Fediuk, R., Haruna, S., Azevedo, A., & Vatin, N. (2021) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2021.e00661 · Cited by 280
Metadata
- Authors
- Singh, N. B., & Middendorf, B.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 237
- Pages
- 117455
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2990195657
- Cited by
- 817
- References
- 75
- FWCI
- 36.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.