The DOI matches its Crossref record; 112 of the 112 references it cites were found in a registry or an index.
Machine learning techniques for structural health monitoring of heritage buildings: A state-of-the-art review and case studies
Abstract
This paper performed a systematic review of the various machine learning (ML) techniques applied to assess the health condition of heritage buildings. More robust predictive models can be obtained through the effective utilisation of test data gathered from the laboratory or field combined with ML. These models can be used for several predictive applications such as predicting the compressive strength of masonry or repair mortars, possible damage scenarios in heritage buildings, seismic vulnerability assessment, determination of the mechanical properties of materials, and superficial damages on the surface of the monument due to weathering effects, material loss, efflorescence, seepage, algae growth, and moss deposition. The case studies of several interesting and diverse applications of ML, such as its use in strengthening applications, are also discussed. Indirect factors that must be determined to quantify the extent of damage such as moisture content, cracks, and amount of deposited dust in heritage buildings, are also discussed. Furthermore, future research directions and challenges in applying the ML techniques in the case of heritage buildings are highlighted.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Breiman, L. (2001) · Machine Learning · doi:10.1023/a:1010933404324 · Cited by 133,538
Zadeh, L. A. (1965) · Information and Control · doi:10.1016/s0019-9958(65)90241-x · Cited by 67,855
Cortes, C., & Vapnik, V. (1995) · Machine Learning · doi:10.1007/bf00994018 · Cited by 59,421
Zadeh, L. A. (1996) · Cited by 46,844
ANFIS: adaptive-network-based fuzzy inference system
Jang, J.-S. R. (1993) · IEEE Transactions on Systems, Man, and Cybernetics · doi:10.1109/21.256541 · Cited by 16,254
A tutorial on support vector regression
Smola, A. J., & Schölkopf, B. (2004) · Statistics and Computing · doi:10.1023/b:stco.0000035301.49549.88 · Cited by 13,387
Training feedforward networks with the Marquardt algorithm
Hagan, M. T., & Menhaj, M. B. (1994) · IEEE Transactions on Neural Networks · doi:10.1109/72.329697 · Cited by 7,701
Distance Metric Learning for Large Margin Nearest Neighbor Classification
Weinberger, K. Q., & Saul, L. K. (2009) · Journal of Machine Learning Research · doi:10.5555/1577069.1577078 · Cited by 4,044
Deep Learning‐Based Crack Damage Detection Using Convolutional Neural Networks
Cha, Y., Choi, W., & Büyüköztürk, O. (2017) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12263 · Cited by 3,295
International Conference on Artificial Neural Networks
(1990) · Neural Networks · doi:10.1016/0893-6080(90)90065-s · Cited by 2,088
Detection of structural damage through changes in frequency: a review
Salawu, O. S. (1997) · Engineering Structures · doi:10.1016/s0141-0296(96)00149-6 · Cited by 2,080
Vibration-based Damage Identification Methods: A Review and Comparative Study
Fan, W., & Qiao, P. (2011) · Structural Health Monitoring · doi:10.1177/1475921710365419 · Cited by 2,045
Vibration Based Condition Monitoring: A Review
Carden, E. P., & Fanning, P. (2004) · Structural Health Monitoring · doi:10.1177/1475921704047500 · Cited by 1,543
Autonomous concrete crack detection using deep fully convolutional neural network
Dung, C. V., & Anh, L. D. (2019) · Automation in Construction · doi:10.1016/j.autcon.2018.11.028 · Cited by 1,170
Emerging Artificial Intelligence Methods in Structural Engineering
Salehi, H., & Burgueño, R. (2018) · Engineering Structures · doi:10.1016/j.engstruct.2018.05.084 · Cited by 1,068
Machine learning-based compressive strength prediction for concrete: An adaptive boosting approach
Feng, D.-C., Liu, Z.-T., Wang, X.-D., Chen, Y., Chang, J.-Q., Wei, D.-F., & Jiang, Z.-M. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117000 · Cited by 856
(1993) · Cited by 822
Feng, D., & Feng, M. Q. (2018) · Engineering Structures · doi:10.1016/j.engstruct.2017.11.018 · Cited by 782
Review of NDT methods in the assessment of concrete and masonry structures
McCann, D. M., & Forde, M. C. (2001) · NDT & E International · doi:10.1016/s0963-8695(00)00032-3 · Cited by 690
Naderpour, H., Rafiean, A. H., & Fakharian, P. (2018) · Journal of Building Engineering · doi:10.1016/j.jobe.2018.01.007 · Cited by 603
A New Approach for Health Monitoring of Structures: Terrestrial Laser Scanning
Park, H. S., Lee, H. M., Adeli, H., & Lee, I. (2007) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/j.1467-8667.2006.00466.x · Cited by 589
2018 IEEE Congress on Evolutionary Computation (CEC)
(2018) · doi:10.1109/cec40672.2018 · Cited by 555
Machine learning in concrete strength simulations: Multi-nation data analytics
Chou, J.-S., Tsai, C.-F., Pham, A.-D., & Lu, Y.-H. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.09.054 · Cited by 472
Monitoring historical masonry structures with operational modal analysis: Two case studies
Ramos, L. F., Marques, L., Lourenço, P. B., De Roeck, G., Campos-Costa, A., & Roque, J. (2010) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.01.011 · Cited by 443
Vibration-based damage detection techniques used for health monitoring of structures: a review
Das, S., Saha, P., & Patro, S. K. (2016) · Journal of Civil Structural Health Monitoring · doi:10.1007/s13349-016-0168-5 · Cited by 433
Machine Learning for Crack Detection: Review and Model Performance Comparison
Hsieh, Y.-A., & Tsai, Y. J. (2020) · Journal of Computing in Civil Engineering · doi:10.1061/(asce)cp.1943-5487.0000918 · Cited by 420
Bui, D.-K., Nguyen, T., Chou, J.-S., Nguyen-Xuan, H., & Ngo, T. D. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.05.201 · Cited by 395
Compressive strength prediction of recycled concrete based on deep learning
Deng, F., He, Y., Zhou, S., Yu, Y., Cheng, H., & Wu, X. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.169 · Cited by 391
Machine Learning for Cultural Heritage: A Survey
Fiorucci, M., Khoroshiltseva, M., Pontil, M., Traviglia, A., Del Bue, A., & James, S. (2020) · Pattern Recognition Letters · doi:10.1016/j.patrec.2020.02.017 · Cited by 365
Review of machine-vision based methodologies for displacement measurement in civil structures
Xu, Y., & Brownjohn, J. M. W. (2018) · Journal of Civil Structural Health Monitoring · doi:10.1007/s13349-017-0261-4 · Cited by 357
Chithra, S., Kumar, S. R. R. S., Chinnaraju, K., & Alfin Ashmita, F. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.214 · Cited by 342
Khademi, F., Jamal, S. M., Deshpande, N., & Londhe, S. (2016) · International Journal of Sustainable Built Environment · doi:10.1016/j.ijsbe.2016.09.003 · Cited by 321
Automatic damage detection of historic masonry buildings based on mobile deep learning
Wang, N., Zhao, X., Zhao, P., Zhang, Y., Zou, Z., & Ou, J. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.03.003 · Cited by 285
Ventolà, L., Vendrell, M., Giraldez, P., & Merino, L. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.03.020 · Cited by 269
Wu, R.-T., & Jahanshahi, M. R. (2020) · Structural Health Monitoring · doi:10.1177/1475921718798769 · Cited by 257
Gökçeoğlu, C. (2002) · Engineering Geology · doi:10.1016/s0013-7952(02)00023-6 · Cited by 256
Getahun, M. A., Shitote, S. M., & Abiero Gariy, Z. C. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.097 · Cited by 247
Prediction of shear strength of soft soil using machine learning methods
Pham, B. T., Son, L. H., Hoang, T.-A., Nguyen, D.-M., & Tien Bui, D. (2018) · CATENA · doi:10.1016/j.catena.2018.04.004 · Cited by 246
Fan, Z., Wu, Y., Lu, J., & Li, W. (2018) · arXiv (Cornell University) · doi:10.48550/arxiv.1802.02208 · Cited by 227
Microbial impact on building materials: an overview
Gaylarde, C. C., Silva, M. R., & Warscheid, T. (2003) · Materials and Structures · doi:10.1007/bf02480875 · Cited by 211
Deshpande, N., Londhe, S., & Kulkarni, S. (2014) · International Journal of Sustainable Built Environment · doi:10.1016/j.ijsbe.2014.12.002 · Cited by 207
Terrestrial laser scanning intensity data applied to damage detection for historical buildings
Armesto-González, J., Riveiro-Rodríguez, B., González-Aguilera, D., & Rivas-Brea, M. T. (2010) · Journal of Archaeological Science · doi:10.1016/j.jas.2010.06.031 · Cited by 205
Machine learning algorithms for damage detection: Kernel-based approaches
Santos, A., Figueiredo, E., Silva, M. F. M., Sales, C. S., & Costa, J. C. W. A. (2016) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2015.11.008 · Cited by 200
Cascardi, A., Micelli, F., & Aiello, M. A. (2017) · Engineering Structures · doi:10.1016/j.engstruct.2017.02.047 · Cited by 196
Huang, J.-C., Ko, K.-M., Shu, M.-H., & Hsu, B.-M. (2020) · Neural Computing and Applications · doi:10.1007/s00521-019-04644-5 · Cited by 196
Yesiloglu-Gultekin, N., Gökçeoğlu, C., & Sezer, E. A. (2013) · International Journal of Rock Mechanics and Mining Sciences · doi:10.1016/j.ijrmms.2013.05.005 · Cited by 187
Structural health monitoring of civil infrastructure systems
Karbhari, V. M., & Ansari, F. (2009) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845696825 · Cited by 180
Automated defect detection and classification in ashlar masonry walls using machine learning
Valero, E., Forster, A., Bosché, F., Hyslop, E., Wilson, L., & Turmel, A. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.102846 · Cited by 180
The International Conference on Advanced Machine Learning Technologies and Applications
Hassanien, A. E., & all, E. (2020) · Cited by 176
Soft computing techniques in structural and earthquake engineering: a literature review
Falcone, R., Lima, C., & Martinelli, E. (2020) · Engineering Structures · doi:10.1016/j.engstruct.2020.110269 · Cited by 173
Ancient Egyptian Materials and Industries
Myers, O. H. (1935) · The Journal of Egyptian Archaeology · doi:10.1177/030751333502100127 · Cited by 165
Wang, N., Zhao, Q., Li, S., Zhao, X., & Zhao, P. (2018) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12411 · Cited by 162
Prediction of compressive strength of self-compacting concrete by ANFIS models
Vakhshouri, B., & Nejadi, S. (2017) · Neurocomputing · doi:10.1016/j.neucom.2017.09.099 · Cited by 161
Galantucci, R. A., & Fatiguso, F. (2018) · Journal of Cultural Heritage · doi:10.1016/j.culher.2018.09.014 · Cited by 156
Armaghani, D. J., Mohamad, E. T., Hajihassani, M., Yağız, S., & Motaghedi, H. (2015) · Engineering With Computers · doi:10.1007/s00366-015-0410-5 · Cited by 150
Masciotta, M. G., Ramos, L. F., & Lourenço, P. B. (2017) · Journal of Cultural Heritage · doi:10.1016/j.culher.2017.04.003 · Cited by 149
Trier, Ø. D., Cowley, D. C., & Waldeland, A. U. (2018) · Archaeological Prospection · doi:10.1002/arp.1731 · Cited by 140
Cheng, M., Firdausi, P. M., & Prayogo, D. (2013) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2013.11.014 · Cited by 129
Structural health monitoring of historical heritage in Italy: some relevant experiences
Stefano, A. D., Matta, E., & Clemente, P. (2016) · Journal of Civil Structural Health Monitoring · doi:10.1007/s13349-016-0154-y · Cited by 121
Automatic detection of building typology using deep learning methods on street level images
González, D., Rueda-Plata, D., Acevedo, A. B., Duque, J. C., Ramos-Pollán, R., Betancourt, A., & García, S. (2020) · Building and Environment · doi:10.1016/j.buildenv.2020.106805 · Cited by 115
Operational modal analysis and FE model updating of the Metropolitan Cathedral of Santiago, Chile
Torres, W., Almazán, J. L., Sandoval, C., et al. (2017) · Engineering Structures · doi:10.1016/j.engstruct.2017.04.008 · Cited by 114
Ceravolo, R., Pistone, G., Fragonara, L. Z., Massetto, S., & Abbiati, G. (2014) · International Journal of Architectural Heritage · doi:10.1080/15583058.2013.850554 · Cited by 113
Wang, N., Zhao, X., Zou, Z., Zhao, P., & Qi, F. (2019) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12488 · Cited by 97
Deep learning-based weathering type recognition in historical stone monuments
Hatır, M. E., Barstuğan, M., & İnce, İ. (2020) · Journal of Cultural Heritage · doi:10.1016/j.culher.2020.04.008 · Cited by 96
Ghasemi, E., Kalhori, H., Bagherpour, R., & Yağız, S. (2016) · Bulletin of Engineering Geology and the Environment · doi:10.1007/s10064-016-0931-1 · Cited by 91
Modeling of masonry failure surface under biaxial compressive stress using Neural Networks
Plevris, V., & Asteris, P. G. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.01.041 · Cited by 88
A Genetic Algorithm Procedure for the Automatic Updating of FEM Based on Ambient Vibration Tests
Bianconi, F., Salachoris, G. P., Clementi, F., & Lenci, S. (2020) · Sensors · doi:10.3390/s20113315 · Cited by 86
Zou, Z., Zhao, X., Zhao, P., Qi, F., & Wang, N. (2019) · Journal of Cultural Heritage · doi:10.1016/j.culher.2019.02.002 · Cited by 85
Masonry Compressive Strength Prediction Using Artificial Neural Networks
Asteris, P. G., Argyropoulos, I., Cavaleri, L., Rodrigues, H., Varum, H., Thomas, J., & Lourenço, P. B. (2019) · Communications in computer and information science · doi:10.1007/978-3-030-12960-6_14 · Cited by 82
Yuan, C., & Moayedi, H. (2019) · Engineering With Computers · doi:10.1007/s00366-019-00798-x · Cited by 82
Słoński, M. (2010) · Computers & Structures · doi:10.1016/j.compstruc.2010.07.003 · Cited by 80
Global overview on advances in structural health monitoring platforms
Mesquita, E., Antunes, P. F. D. C., Coelho, F., André, P. S. D. B., Arêde, A., & Varum, H. (2016) · Journal of Civil Structural Health Monitoring · doi:10.1007/s13349-016-0184-5 · Cited by 74
Barzegar, R., Sattarpour, M., Deo, R. C., Fijani, E., & Adamowski, J. (2019) · Neural Computing and Applications · doi:10.1007/s00521-019-04418-z · Cited by 74
Topçu, İ. B., Karakurt, C., & Sarıdemir, M. (2008) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2008.04.005 · Cited by 72
Mishra, M., Bhatia, A. S., & Maity, D. (2020) · Journal of Civil Structural Health Monitoring · doi:10.1007/s13349-020-00391-7 · Cited by 67
Self-citationAguilar, V., Sandoval, C., Adam, J. M., Garzón-Roca, J., & Valdebenito, G. (2016) · Structure and Infrastructure Engineering · doi:10.1080/15732479.2016.1157824 · Cited by 60
Wang, N., Zhao, X., Wang, L., & Zou, Z. (2019) · Journal of Infrastructure Systems · doi:10.1061/(asce)is.1943-555x.0000499 · Cited by 60
Sýkora, M., Diamantidis, D., Holický, M., Marková, J., & Rózsás, Á. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.10.180 · Cited by 58
Zonno, G., Aguilar, R., Boroschek, R. L., & Lourenço, P. B. (2019) · Engineering Structures · doi:10.1016/j.engstruct.2019.109299 · Cited by 58
Goetzke-Pala, A., Hoła, A., & Sadowski, Ł. (2018) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2018.07.004 · Cited by 56
Nazarian, E., Taylor, T., Weifeng, T., & Ansari, F. (2018) · Journal of Civil Structural Health Monitoring · doi:10.1007/s13349-018-0275-6 · Cited by 53
Moisture detection in heritage buildings by 3D laser scanning
Lerones, P. M., Olmedo, D., Rojo, F. G., Gómez‐García‐Bermejo, J., & Zalama, E. (2016) · Studies in Conservation · doi:10.1179/2047058415y.0000000017 · Cited by 50
Ceryan, N., & Samui, P. (2020) · Arabian Journal of Geosciences · doi:10.1007/s12517-020-5273-4 · Cited by 50
Estimation of the axial behaviour of masonry walls based on Artificial Neural Networks
Garzón-Roca, J., Adam, J. M., Sandoval, C., & Roca, P. (2013) · Computers & Structures · doi:10.1016/j.compstruc.2013.05.006 · Cited by 47
Prediction of the durability of limestone aggregates using computational techniques
Abad, S. V. A. N. K., Yılmaz, M., Armaghani, D. J., & Tuğrul, A. (2016) · Neural Computing and Applications · doi:10.1007/s00521-016-2456-8 · Cited by 47
Conde, B., Eguía, P., Stavroulakis, G. Ε., & Granada, E. (2018) · Engineering Structures · doi:10.1016/j.engstruct.2018.06.040 · Cited by 47
A Bayesian approach for NDT data fusion: The Saint Torcato church case study
Ramos, L. F., Miranda, T. F. D. S., Mishra, M., Fernandes, F. M., & Manning, E. (2014) · Engineering Structures · doi:10.1016/j.engstruct.2014.11.015 · Cited by 46
Self-citationStructural Health Monitoring of an Historical Building: The Main Spire of the Duomo Di Milano
Cigada, A., Dell'Acqua, L. C., Castiglione, B. M. V., Scaccabarozzi, M., Vanali, M., & Zappa, E. (2016) · International Journal of Architectural Heritage · doi:10.1080/15583058.2016.1263691 · Cited by 44
Compán, V., Pachón, P., Cámara, M., Lourenço, P. B., & Sáez, A. (2017) · Engineering Structures · doi:10.1016/j.engstruct.2017.03.002 · Cited by 44
Prieto, A. J., Verichev, K., & Carpio, M. (2020) · Building and Environment · doi:10.1016/j.buildenv.2020.106657 · Cited by 43
Barontini, A., Masciotta, M. G., Ramos, L. F., et al. (2017) · Procedia Engineering · doi:10.1016/j.proeng.2017.09.439 · Cited by 40
Ramil, A., Díaz, A. J. L., Pozo-Antonio, J. S., & Rivas, T. (2017) · Measurement · doi:10.1016/j.measurement.2017.12.006 · Cited by 40
Service life prediction models for exterior stone cladding
Silva, A. R., Dias, J. L. R., Gaspar, P. L., & de Brito, J. (2011) · Building Research & Information · doi:10.1080/09613218.2011.617095 · Cited by 37
Mishra, M., Bhatia, A. S., & Maity, D. (2019) · SN Applied Sciences · doi:10.1007/s42452-019-0590-5 · Cited by 36
Self-citationVasanelli, E., Colangiuli, D., Calia, A., Sbartaï, Z., & Breysse, D. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.146 · Cited by 35
Apostolopoulou, M., Delegou, E. T., Alexakis, E., Kalofonou, M., Lampropoulos, K., Aggelakopoulou, E., Bakolas, A., & Moropoulou, A. I. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.016 · Cited by 35
Automated Model Updating of Historical Masonry Structures Based on Ambient Vibration Measurements
Altunışık, A. C., Okur, F. Y., Genç, A. F., Günaydın, M., & Adanur, S. (2017) · Journal of Performance of Constructed Facilities · doi:10.1061/(asce)cf.1943-5509.0001108 · Cited by 34
Extending the life-span of cultural heritage structures
Clemente, P. (2018) · Journal of Civil Structural Health Monitoring · doi:10.1007/s13349-018-0278-3 · Cited by 34
Monna, F., Magail, J., Rolland, T., Navarro, N., Wilczek, J., Gantulga, J.-O., Esin, Y. N., Granjon, L., Allard, A.-C., & Chateau‐Smith, C. (2020) · Journal of Cultural Heritage · doi:10.1016/j.culher.2020.01.002 · Cited by 31
Monitoring the health of an emblematic monument from terrestrial laser scanner
González‐Aguilera, D., Gómez‐Lahoz, J., Muñoz, Á. L. F., & Herrero-Pascual, J. (2008) · Nondestructive Testing And Evaluation · doi:10.1080/10589750802259000 · Cited by 26
Characterization of waterproof-covering mortars on Ottoman monuments of “Ghar El Melh” (Tunisia)
Labiadh, M. R., Ouezdou, M. B., Hajjem, B. T., & Mensi, R. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.11.007 · Cited by 23
Finotti, R. P., Barbosa, F. D. S., Cury, A., & Gentile, C. (2017) · Procedia Engineering · doi:10.1016/j.proeng.2017.09.438 · Cited by 23
Raghav, N., Mamta, M., Shrivastava, J. N., Satsangi, G. P., & Kumar, R. (2020) · Urban Climate · doi:10.1016/j.uclim.2020.100596 · Cited by 19
Masrour, T., Hassani, I. E., & Bouchama, M. S. (2020) · Advances in intelligent systems and computing · doi:10.1007/978-3-030-36671-1_18 · Cited by 16
Non-destructive neural identification of the moisture content of saline ceramic bricks
Goetzke-Pala, A., Hoła, J., & Sadowski, Ł. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.044 · Cited by 14
Detection of Dust Deposition Using Convolutional Neural Network for Heritage Images
Sharma, T., Agrawal, P., & Verma, N. K. (2018) · Advances in intelligent systems and computing · doi:10.1007/978-981-13-1135-2_27 · Cited by 13
Artificial neural network implementation for masonry compressive strength estimation
Carozza, S., & Cimmino, M. (2019) · Proceedings of the Institution of Civil Engineers - Structures and Buildings · doi:10.1680/jstbu.18.00089 · Cited by 10
Adaptively Weighted Support Vector Regression: Prognostic Application to a Historic Masonry Fort
Atamturktur, S., Farajpour, I., Prabhu, S., & Haydock, A. (2013) · Journal of Performance of Constructed Facilities · doi:10.1061/(asce)cf.1943-5509.0000517 · Cited by 8
Marrongelli, G., Finotti, R. P., Gentile, C., & Barbosa, F. D. S. (2018) · MATEC Web of Conferences · doi:10.1051/matecconf/201821121002 · Cited by 5
Robust surface reconstruction from highly noisy point clouds using distributed elastic networks
Zhou, Z. (2019) · Neural Computing and Applications · doi:10.1007/s00521-019-04409-0 · Cited by 1
Cited by
Machine Learning for Structural Engineering: A State-of-the-Art Review
Thai, H.-T. (2022) · Structures · doi:10.1016/j.istruc.2022.02.003 · Cited by 748
Mishra, M., Lourenço, P. B., & Ramana, G. V. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103954 · Cited by 479
Self-citationArtificial intelligence-assisted visual inspection for cultural heritage: State-of-the-art review
Mishra, M., & Lourenço, P. B. (2024) · Journal of Cultural Heritage · doi:10.1016/j.culher.2024.01.005 · Cited by 165
Self-citationBuragohain, D., Meng, Y., Deng, C., Li, Q., & Chaudhary, S. (2024) · Heritage Science · doi:10.1186/s40494-024-01403-1 · Cited by 161
Kong, X., & Hucks, R. G. (2023) · Automation in Construction · doi:10.1016/j.autcon.2023.104928 · Cited by 125
Metadata
- Authors
- Mishra, M.
- Venue
- Journal of Cultural Heritage
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 47
- Pages
- 227-245
- ISSN
- 1296-2074 (ISSN-L)
- OpenAlex
- W3090789213
- Cited by
- 256
- References
- 112
- FWCI
- 15.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.