The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
High entropy alloy as a highly active and stable electrocatalyst for hydrogen evolution reaction
Abstract
Abstract Transition metals and their alloys are expected to have high catalytic activities for hydrogen evolution reaction due to their partially filled d orbitals fitting for the gain and loss of electrons. The poor corrosion resistance, however, limits their applications as electrocatalysts in acidic and alkaline electrolytes. In this work, we report that high entropy alloy (HEA, Ni 20 Fe 20 Mo 10 Co 35 Cr 15 ) with high corrosion resistance can be functioned as highly active and stable electrocatalyst for the hydrogen evolution reaction in both acidic and basic electrolytes. The HEA requires an overpotential of only 107 mV in acidic solutions and 172 mV in the basic solution at current density of 100 mA cm −2 , which are much better than that of the dual-phase counterpart and even comparable to that of Pt sheet and most reported nanostructured noble-metal-free catalysts, for hydrogen evolution reaction in both acidic and alkaline solutions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Trends in the exchange current for hydrogen evolution
Nørskov, J. K., Bligaard, T., Logadottir, A., Kitchin, J. R., Chen, J. G., Pandelov, S., & Stimming, U. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1856988 · Cited by 6,121
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
Cherevko, S., Geiger, S., Kasian, O., Kulyk, N., Grote, J.-P., Savan, A., Shrestha, B. R., Merzlikin, S., Breitbach, B., Ludwig, A., et al. (2016) · Catalysis Today · doi:10.1016/j.cattod.2015.08.014 · Cited by 1,448
Yeh, J.-W., Lin, S.-J., Chin, T.-S., Gan, J.-Y., Chen, S.-K., Shun, T.-T., Tsau, C.-H., & Chou, S.-Y. (2004) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-006-0234-4 · Cited by 1,252
A mini review on nickel-based electrocatalysts for alkaline hydrogen evolution reaction
Gong, M., Wang, D.-Y., Chen, C.-C., Hwang, B.-J., & Dai, H. (2016) · Nano Research · doi:10.1007/s12274-015-0965-x · Cited by 953
Ni–Mo Nanopowders for Efficient Electrochemical Hydrogen Evolution
McKone, J. R., Sadtler, B. F., Werlang, C. A., Lewis, N. S., & Gray, H. B. (2013) · ACS Catalysis · doi:10.1021/cs300691m · Cited by 798
Volcano plots in hydrogen electrocatalysis – uses and abuses
Quaino, P., Juarez, F., Santos, E., & Schmickler, W. (2014) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.5.96 · Cited by 608
Cited by
Oses, C., Toher, C., & Curtarolo, S. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0170-8 · Cited by 2,081
Mechanical behavior of high-entropy alloys
Li, W., Xie, D., Li, D., Zhang, Y., Gao, Y., & Liaw, P. K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100777 · Cited by 1,321
High-entropy energy materials: challenges and new opportunities
Ma, Y., Ma, Y., Wang, Q., Schweidler, S., Botros, M., Fu, T., Hahn, H., Brezesinski, T., & Breitung, B. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00505g · Cited by 963
High-Entropy Alloys as a Platform for Catalysis: Progress, Challenges, and Opportunities
Xin, Y., Li, S., Qian, Y., Zhu, W., Yuan, H., Jiang, P., Guo, R., & Wang, L. (2020) · ACS Catalysis · doi:10.1021/acscatal.0c03617 · Cited by 840
(2020) · doi:10.1038/s41467-020-19277-9 · Cited by 690
Recent progress of high-entropy materials for energy storage and conversion
Amiri, A., & Shahbazian-Yassar, R. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta09578h · Cited by 592
Fan, L., Ji, Y., Wang, G., Chen, J., Chen, K., Liu, X., & Wen, Z. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.1c13740 · Cited by 554
High-entropy alloys in electrocatalysis: from fundamentals to applications
Ren, J.-T., Chen, L., Wang, H.-Y., & Yuan, Z.-Y. (2023) · Chemical Society Reviews · doi:10.1039/d3cs00557g · Cited by 551
High-entropy alloys: emerging materials for advanced functional applications
Wang, X., Guo, W., & Fu, Y. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta09601f · Cited by 524
Multi‐Sites Electrocatalysis in High‐Entropy Alloys
Li, H., Lai, J., Li, Z., & Wang, L. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202106715 · Cited by 494
High-Entropy Alloys as Catalysts for the CO 2 and CO Reduction Reactions
Pedersen, J. K., Batchelor, T. A. A., Bagger, A., & Rossmeisl, J. (2020) · ACS Catalysis · doi:10.1021/acscatal.9b04343 · Cited by 492
High-entropy materials for energy and electronic applications
Schweidler, S., Botros, M., Strauss, F., Wang, Q., Ma, Y., Velasco, L., Cadilha Marques, G., Sarkar, A., Kübel, C., Hahn, H., et al. (2024) · Nature Reviews Materials · doi:10.1038/s41578-024-00654-5 · Cited by 448
High-Entropy Alloys as Catalysts for the CO2 and CO Reduction Reactions: Experimental Realization
Nellaiappan, S., Katiyar, N. K., Kumar, R., Parui, A., Malviya, K. D., Pradeep, K. G., Singh, A. K., Sharma, S., Tiwary, C. S., & Biswas, K. (2020) · ACS Catalysis · doi:10.1021/acscatal.9b04302 · Cited by 447
Jin, Z., Lv, J., Jia, H., Liu, W., Li, H., Chen, Z., Lin, X., Xie, G., Liu, X., Sun, S., et al. (2019) · Small · doi:10.1002/smll.201904180 · Cited by 425
Qiu, H.-J., Fang, G., Gao, J., Wen, Y., Lv, J., Li, H., Xie, G., Liu, X., & Sun, S. (2019) · ACS Materials Letters · doi:10.1021/acsmaterialslett.9b00414 · Cited by 422
Catalysis of Alloys: Classification, Principles, and Design for a Variety of Materials and Reactions
Nakaya, Y., & Furukawa, S. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00356 · Cited by 415
Nanoporous high-entropy alloys for highly stable and efficient catalysts
Qiu, H.-J., Fang, G., Wen, Y., Liu, P., Xie, G., Liu, X., & Sun, S. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta00505f · Cited by 364
Wu, D., Kusada, K., Yamamoto, T., Toriyama, T., Matsumura, S., Gueye, I., Seo, O., Kim, J., Hiroi, S., Sakata, O., et al. (2020) · Chemical Science · doi:10.1039/d0sc02351e · Cited by 315
High‐Entropy Alloys for Electrocatalysis: Design, Characterization, and Applications
Zhang, Y., Wang, D., & Wang, S. (2022) · Small · doi:10.1002/smll.202104339 · Cited by 296
Mechanically alloyed high entropy alloys: existing challenges and opportunities
Kumar, A., Singh, A., & Suhane, A. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.01.141 · Cited by 294
Scalable Synthesis of High Entropy Alloy Nanoparticles by Microwave Heating
Qiao, H., Saray, M. T., Wang, X., Xu, S., Chen, G., Huang, Z., Chen, C., Zhong, G., Dong, Q., Hong, M., et al. (2021) · ACS Nano · doi:10.1021/acsnano.1c05113 · Cited by 292
Dai, W., Lu, T., & Pan, Y. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.05.030 · Cited by 282
High-entropy materials for energy-related applications
Fu, M., Ma, X., Zhao, K., Li, X., & Su, D. (2021) · iScience · doi:10.1016/j.isci.2021.102177 · Cited by 278
Recent progress in high-entropy alloys for catalysts: synthesis, applications, and prospects
Li, K., & Chen, W. (2021) · Materials Today Energy · doi:10.1016/j.mtener.2021.100638 · Cited by 275
Kinetically-controlled laser-synthesis of colloidal high-entropy alloy nanoparticles
Waag, F., Li, Y., Ziefuß, A. R., Bertin, E., Kamp, M., Duppel, V., Marzun, G., Kienle, L., Barcikowski, S., & Gökce, B. (2019) · RSC Advances · doi:10.1039/c9ra03254a · Cited by 273
Masa, J., Andronescu, C., & Schuhmann, W. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202007672 · Cited by 272
Mesoporous multimetallic nanospheres with exposed highly entropic alloy sites
Kang, Y., Cretu, O., Kikkawa, J., Kimoto, K., Nara, H., Nugraha, A. S., Kawamoto, H., Eguchi, M., Liao, T., Sun, Z., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-39157-2 · Cited by 271
Li, S., Tang, X., Jia, H., Li, H., Xie, G., Liu, X., Lin, X., & Qiu, H.-J. (2020) · Journal of Catalysis · doi:10.1016/j.jcat.2020.01.024 · Cited by 253
Jin, Z., Lyu, J., Zhao, Y.-L., Li, H., Lin, X., Xie, G., Liu, X., Kai, J.-J., & Qiu, H.-J. (2020) · ACS Materials Letters · doi:10.1021/acsmaterialslett.0c00434 · Cited by 244
Li, R., Liu, X., Liu, W., Li, Z., Chan, K. C., & Lu, Z. (2022) · Advanced Science · doi:10.1002/advs.202105808 · Cited by 100
High‐Entropy Nanomaterials for Advanced Electrocatalysis
Lee, S. A., Bu, J., Lee, J., & Jang, H. W. (2023) · Small Science · doi:10.1002/smsc.202200109 · Cited by 95
Metadata
- Authors
- Zhang, G., Ming, K., Kang, J., Huang, Q., Zhang, Z., Zheng, X., & Bi, X.
- Venue
- Electrochimica Acta
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 279
- Pages
- 19-23
- ISSN
- 0013-4686 (ISSN-L)
- OpenAlex
- W2801886803
- Cited by
- 366
- References
- 26
- FWCI
- 4.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.