The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Single-crystal nickel-rich layered-oxide battery cathode materials: synthesis, electrochemistry, and intra-granular fracture
Abstract
Abstract Electro-mechanical degradation is commonly observed in various battery electrode materials, which are often prepared as polycrystalline particles consisting of nanoscale primary grains. The anisotropic volume change during lithium extraction/insertion makes these materials intrinsically vulnerable to grain-boundary (inter-granular) fracture that leads to rapid impedance growth and capacity decay. Here, guided by fracture mechanics analysis, we synthesize microsized single-crystal Ni-rich layered-oxide (NMC) cathode materials via an industrially-applicable molten-salt approach. Using single-crystal LiNi0.6Mn0.2Co0.2O2 as a model material, we show that the cycle performance of the Ni-rich NMC can be significantly improved by eliminating the internal grain boundaries and inter-granular fracture. The single-crystal LiNi0.6Mn0.2Co0.2O2 cathodes show high specific capacity (183 mAh g−1 at 0.1 C rate, 4.3–2.8 V) and excellent capacity retention (94% after 300 cycles at 1C/1C cycling). Further, it is confirmed for the first time that the single-crystal LiNi0.6Mn0.2Co0.2O2 particles are stable against intra-granular fracture as well under normal operating conditions but do crack if severely overcharged. Electrochemical-shock resistant single-crystal NMC reveals an alternative path towards developing better battery cathode materials, beyond the traditional one built upon polycrystalline NMC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Noh, H.-J., Youn, S., Yoon, C. S., & Sun, Y.-K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.063 · Cited by 2,302
Alloy Negative Electrodes for Li-Ion Batteries
Obrovac, M. N., & Chevrier, V. L. (2014) · Chemical Reviews · doi:10.1021/cr500207g · Cited by 2,175
Nickel‐Rich Layered Lithium Transition‐Metal Oxide for High‐Energy Lithium‐Ion Batteries
Liu, W., Oh, P., Liu, X., Lee, M., Cho, W., Chae, S., Kim, Y., & Cho, J. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201409262 · Cited by 1,960
Ryu, H.-H., Park, K.-J., Yoon, C. S., & Sun, Y.-K. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b05269 · Cited by 1,629
High-energy cathode material for long-life and safe lithium batteries
Sun, Y.-K., Myung, S.-T., Park, B.-C., Prakash, J., Belharouak, I., & Amine, K. (2009) · Nature Materials · doi:10.1038/nmat2418 · Cited by 1,519
Capacity Fade Mechanisms and Side Reactions in Lithium‐Ion Batteries
Arora, P., White, R. E., & Doyle, M. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838857 · Cited by 1,408
Myung, S.-T., Maglia, F., Park, K.-J., Yoon, C. S., Lamp, P., Kim, S.-J., & Sun, Y.-K. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00594 · Cited by 1,382
Jung, R., Metzger, M., Maglia, F., Stinner, C., & Gasteiger, H. A. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0021707jes · Cited by 1,350
Yan, P., Zheng, J., Gu, M., Xiao, J., Zhang, J.-G., & Wang, C.-M. (2017) · Nature Communications · doi:10.1038/ncomms14101 · Cited by 1,010
Prospect and Reality of Ni‐Rich Cathode for Commercialization
Kim, J., Lee, H., Cha, H., Yoon, M., Park, M., & Cho, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201702028 · Cited by 933
Cited by
High-voltage liquid electrolytes for Li batteries: progress and perspectives
Fan, X., & Wang, C. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00450f · Cited by 980
Reversible planar gliding and microcracking in a single-crystalline Ni-rich cathode
Bi, Y., Tao, J., Wu, Y., Li, L., Xu, Y., Hu, E., Wu, B., Hu, J., Wang, C., Zhang, J.-G., et al. (2020) · Science · doi:10.1126/science.abc3167 · Cited by 889
Self-citationJiang, M., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202103005 · Cited by 720
Capacity Fading Mechanisms in Ni-Rich Single-Crystal NCM Cathodes
Ryu, H.-H., Namkoong, B., Kim, J.-H., Belharouak, I., Yoon, C. S., & Sun, Y.-K. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c01089 · Cited by 631
In situ inorganic conductive network formation in high-voltage single-crystal Ni-rich cathodes
Fan, X., Ou, X., Zhao, W., Liu, Y., Zhang, B., Zhang, J., Zou, L., Seidl, L., Li, Y., Hu, G., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-25611-6 · Cited by 488
Eshetu, G. G., Zhang, H., Judez, X., Adenusi, H., Armand, M., Passerini, S., & Figgemeier, E. (2021) · Nature Communications · doi:10.1038/s41467-021-25334-8 · Cited by 485
Liu, J., Wang, J., Ni, Y., Zhang, K., Cheng, F., & Chen, J. (2021) · Materials Today · doi:10.1016/j.mattod.2020.10.028 · Cited by 349
Oxygen Loss in Layered Oxide Cathodes for Li-Ion Batteries: Mechanisms, Effects, and Mitigation
Zhang, H., Liu, H., Piper, L. F. J., Whittingham, M. S., & Zhou, G. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00327 · Cited by 338
Mechanical properties of cathode materials for lithium-ion batteries
Stallard, J. C., Wheatcroft, L., Booth, S. G., Boston, R., Corr, S. A., De Volder, M. F. L., Inkson, B. J., & Fleck, N. A. (2022) · Joule · doi:10.1016/j.joule.2022.04.001 · Cited by 336
Xu, G., Liu, X., Daali, A., Amine, R., Chen, Z., & Amine, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202004748 · Cited by 313
Han, Y., Jung, S. H., Kwak, H., Jun, S., Kwak, H. H., Lee, J. H., Hong, S., & Jung, Y. S. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202100126 · Cited by 312
Metadata
- Authors
- Qian, G., Zhang, Y., Li, L., Zhang, R., Xu, J., Cheng, Z., Xie, S., Wang, H., Rao, Q., He, Y., Shen, Y., Chen, L., Tang, M., & Ma, Z.-F.
- Venue
- Energy Storage Materials
- Publisher
- Elsevier BV
- Published
- 2020-05
- Volume
- 27
- Pages
- 140-149
- ISSN
- 2405-8289 (ISSN-L)
- 2405-8297
- OpenAlex
- W3002151566
- Cited by
- 564
- References
- 31
- FWCI
- 27.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.