The DOI matches its Crossref record; 80 of the 80 references it cites were found in a registry or an index.
Electrode manufacturing for lithium-ion batteries—Analysis of current and next generation processing
Open accessAbstract
As modern energy storage needs become more demanding, the manufacturing of lithium-ion batteries (LIBs) represents a sizable area of growth of the technology. Specifically, wet processing of electrodes has matured such that it is a commonly employed industrial technique. Despite its widespread acceptance, wet processing of electrodes faces a number of problems, including expensive and dangerous solvent recovery, cut-off waste, coating inconsistencies, and microstructural defects due to the solvent drying process. This review considers each of these issues and discusses which electrode slurry properties should be considered when optimizing wet slurry fabrication. Simultaneously, methods to replace traditional wet processing of electrodes are being extensively researched. Some of these novel electrode manufacturing techniques prioritize solvent minimization, while others emphasize boosting energy and power density by thickening the electrode and, subsequently, creating an organized pore structure to permit faster ion diffusion. This review contemplates the advantages and disadvantages of each of these approaches and provides a comprehensive outlook on the future of electrode manufacturing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Mewis, J., & Wagner, N. J. (2011) · Cambridge University Press eBooks · doi:10.1017/cbo9780511977978 · Cited by 1,142
Current status and challenges for automotive battery production technologies
Kwade, A., Haselrieder, W., Leithoff, R., Modlinger, A., Dietrich, F., & Droeder, K. (2018) · Nature Energy · doi:10.1038/s41560-018-0130-3 · Cited by 1,133
Aurbach, D., Markovsky, B., Weissman, I., Levi, E., & Ein-Eli, Y. (1999) · Electrochimica Acta · doi:10.1016/s0013-4686(99)00194-2 · Cited by 969
Prospects for reducing the processing cost of lithium ion batteries
Wood, D. L., Li, J., & Daniel, C. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.019 · Cited by 827
Self-citationTortuosity Determination of Battery Electrodes and Separators by Impedance Spectroscopy
Landesfeind, J., Hattendorff, J., Ehrl, A., Wall, W. A., & Gasteiger, H. A. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.1141607jes · Cited by 731
Magnetically aligned graphite electrodes for high-rate performance Li-ion batteries
Billaud, J., Bouville, F., Magrini, T., Villevieille, C., & Studart, A. R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.97 · Cited by 671
Pikul, J. H., Gang Zhang, H., Cho, J., Braun, P. V., & King, W. P. (2013) · Nature Communications · doi:10.1038/ncomms2747 · Cited by 635
Quantifying tortuosity in porous Li-ion battery materials
Thorat, I. V., Stephenson, D. E., Zacharias, N. A., Zaghib, K., Harb, J. N., & Wheeler, D. R. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.12.032 · Cited by 571
Life cycle assessment of lithium-ion batteries for plug-in hybrid electric vehicles–Critical issues
Zackrisson, M., Avellán, L., & Orlenius, J. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2010.06.004 · Cited by 551
Tjaden, B., Cooper, S. J., Brett, D. J., Kramer, D., & Shearing, P. R. (2016) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2016.02.006 · Cited by 532
Tortuosity Anisotropy in Lithium‐Ion Battery Electrodes
Ebner, M., Chung, D., García, R. E., & Wood, V. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301278 · Cited by 495
Thick Electrodes for High Energy Lithium Ion Batteries
Singh, M., Kaiser, J., & Hahn, H. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0401507jes · Cited by 455
Debundling and Dissolution of Single-Walled Carbon Nanotubes in Amide Solvents
Furtado, C. A., Kim, U. J., Gutierrez, H. R., Pan, L., Dickey, E. C., & Eklund, P. C. (2004) · Journal of the American Chemical Society · doi:10.1021/ja039588a · Cited by 433
High-performance battery electrodes via magnetic templating
Sander, J. S., Erb, R. M., Li, L., Gurijala, A., & Chiang, Y.-M. (2016) · Nature Energy · doi:10.1038/nenergy.2016.99 · Cited by 409
Materials processing for lithium-ion batteries
Li, J., Daniel, C., & Wood, D. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.001 · Cited by 402
Self-citationToward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries
Li, J., Du, Z., Ruther, R. E., AN, S. J., David, L. A., Hays, K., Wood, M., Phillip, N. D., Sheng, Y., Mao, C., et al. (2017) · JOM · doi:10.1007/s11837-017-2404-9 · Cited by 350
Self-citationInvestigation of film solidification and binder migration during drying of Li-Ion battery anodes
Jaiser, S., Müller, M., Baunach, M., Bauer, W., Scharfer, P., & Schabel, W. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.018 · Cited by 334
Du, Z., Wood, D. L., Daniel, C., Kalnaus, S., & Li, J. (2017) · Journal of Applied Electrochemistry · doi:10.1007/s10800-017-1047-4 · Cited by 310
Self-citationBae, C., Erdonmez, C. K., Halloran, J. W., & Chiang, Y. (2013) · Advanced Materials · doi:10.1002/adma.201204055 · Cited by 307
Kraytsberg, A., & Ein‐Eli, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600655 · Cited by 299
A review of the operating limits in slot die coating processes
Ding, X., Liu, J., & Harris, T. A. L. (2016) · AIChE Journal · doi:10.1002/aic.15268 · Cited by 294
Technical and economic analysis of solvent-based lithium-ion electrode drying with water and NMP
Wood, D. L., Quass, J. D., Li, J., Ahmed, S., Ventola, D., & Daniel, C. (2018) · Drying Technology · doi:10.1080/07373937.2017.1319855 · Cited by 286
Self-citationEffects of inhomogeneities - nanoscale to mesoscale - on the durability of Li-Ion batteries
Harris, S. J., & Lu, P. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp311431z · Cited by 271
Validity of the Bruggeman relation for porous electrodes
Chung, D.-W., Ebner, M., Ely, D. R., Wood, V., & Edwin García, R. (2013) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/21/7/074009 · Cited by 242
Mohanty, D., Hockaday, E., Li, J., Hensley, D. K., Daniel, C., & Wood, D. L. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.007 · Cited by 226
Self-citationSoft- and Hard-Agglomerate Aerosols Made at High Temperatures
Tsantilis, S., & Pratsinis, S. E. (2004) · Langmuir · doi:10.1021/la036389w · Cited by 198
Cost modeling of lithium‐ion battery cells for automotive applications
Patry, G., Romagny, A., Martinet, S., & Froelich, D. (2015) · Energy Science & Engineering · doi:10.1002/ese3.47 · Cited by 194
Enabling aqueous binders for lithium battery cathodes – Carbon coating of aluminum current collector
Doberdò, I., Loeffler, N., Laszczynski, N., Cericola, D., Penazzi, N., Bodoardo, S., Kim, G., & Passerini, S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.10.039 · Cited by 192
Baunach, M., Jaiser, S., Schmelzle, S., Nirschl, H., Scharfer, P., & Schabel, W. (2015) · Drying Technology · doi:10.1080/07373937.2015.1060497 · Cited by 186
Energy impact of cathode drying and solvent recovery during lithium-ion battery manufacturing
Ahmed, S., Nelson, P. A., Gallagher, K. G., & Dees, D. W. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.102 · Cited by 184
Lai, W., Erdonmez, C. K., Marinis, T. F., Bjune, C. K., Dudney, N. J., Xu, F., Wartena, R., & Chiang, Y. (2010) · Advanced Materials · doi:10.1002/adma.200903650 · Cited by 178
Bockholt, H., Haselrieder, W., & Kwade, A. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.04.011 · Cited by 177
Design of Aqueous Processed Thick LiFePO[sub 4] Composite Electrodes for High-Energy Lithium Battery
Porcher, W., Lestriez, B., Jouanneau, S., & Guyomard, D. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3046129 · Cited by 167
Jaiser, S., Kumberg, J., Klaver, J., Urai, J. L., Schabel, W., Schmatz, J., & Scharfer, P. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.01.117 · Cited by 167
Holey Graphene Nanomanufacturing: Structure, Composition, and Electrochemical Properties
Lin, Y., Han, X., Campbell, C. J., Kim, J., Zhao, B., Luo, W., Dai, J., Hu, L., & Connell, J. W. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500321 · Cited by 165
A new approach for rapid electrolyte wetting in tape cast electrodes for lithium-ion batteries
Pfleging, W., & Pröll, J. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta02353f · Cited by 165
Slot-die processing of lithium-ion battery electrodes—Coating window characterization
Schmitt, M., Baunach, M., Wengeler, L., Peters, K., Junges, P., Scharfer, P., & Schabel, W. (2012) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2012.10.011 · Cited by 156
Delattre, B., Amin, R., Sander, J. S., Coninck, J. D., Tomsia, A. P., & Chiang, Y. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1321802jes · Cited by 146
Influence of Convective Drying Parameters on Electrode Performance and Physical Electrode Properties
Westphal, B., Bockholt, H., Günther, T., Haselrieder, W., & Kwade, A. (2015) · ECS Transactions · doi:10.1149/06422.0057ecst · Cited by 142
Mechanistic Understanding of the Role of Evaporation in Electrode Processing
Stein, M., Mistry, A. N., & Mukherjee, P. P. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1271707jes · Cited by 139
Shearing, P. R., Brandon, N. P., Gelb, J., Bradley, R. S., Withers, P. J., Marquis, A. J., Cooper, S. J., & Harris, S. J. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.053207jes · Cited by 138
Lee, J.-H., Paik, U., Hackley, V. A., & Choi, Y.-M. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.087 · Cited by 137
Li, C., & Wang, Y.-W. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.107112jes · Cited by 129
An experimental study of air entrainment at a solid/liquid/gas interface
Burley, R., & Kennedy, B. S. (1976) · Chemical Engineering Science · doi:10.1016/0009-2509(76)87040-6 · Cited by 125
Optimizing the surfactant for the aqueous processing of LiFePO4 composite electrodes
Porcher, W., Lestriez, B., Jouanneau, S., & Guyomard, D. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.088 · Cited by 123
Forouzan, M. M., Chao, C., Bustamante, D., Mazzeo, B. A., & Wheeler, D. R. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.014 · Cited by 122
Yoo, M., Frank, C. W., & Mori, S. (2003) · Chemistry of Materials · doi:10.1021/cm0209970 · Cited by 120
Latex Migration in Battery Slurries during Drying
Lim, S., Ahn, K. H., & Yamamura, M. (2013) · Langmuir · doi:10.1021/la4013685 · Cited by 119
Shim, J., & Striebel, K. A. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00235-0 · Cited by 112
Ceramic Nanoparticle/Monodisperse Latex Coatings
Luo, H., Cardinal, C. M., Scriven, L. E., & Francis, L. F. (2008) · Langmuir · doi:10.1021/la800050u · Cited by 108
Yoo, M., Frank, C. W., Mori, S., & Yamaguchi, S. (2004) · Chemistry of Materials · doi:10.1021/cm0304593 · Cited by 100
Optimization of LiFePO4 Nanoparticle Suspensions with Polyethyleneimine for Aqueous Processing
Li, J., Armstrong, B. L., Kiggans, J., Daniel, C., & Wood, D. L. (2012) · Langmuir · doi:10.1021/la205157d · Cited by 98
Self-citationIn Situ Coating of Li[Ni0.33Mn0.33Co0.33]O2 Particles to Enable Aqueous Electrode Processing
Loeffler, N., Kim, G., Mueller, F., Diemant, T., Kim, J., Behm, R. J., & Passerini, S. (2016) · ChemSusChem · doi:10.1002/cssc.201600353 · Cited by 97
Bockholt, H., Haselrieder, W., & Kwade, A. (2013) · ECS Transactions · doi:10.1149/05026.0025ecst · Cited by 95
Moretti, A., Kim, G., Bresser, D., Renger, K., Paillard, E. E., Marassi, R., Winter, M., & Passerini, S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.07.142 · Cited by 92
Li, J., Armstrong, B. L., Daniel, C., Kiggans, J., & Wood, D. L. (2013) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2013.05.030 · Cited by 91
Self-citationGnanaraj, J., Cohen, Y. S., Levi, M. D., et al. (2001) · Journal of Electroanalytical Chemistry · doi:10.1016/s0022-0728(01)00663-5 · Cited by 90
Kuenzel, M., Bresser, D., Diemant, T., Carvalho, D. V., Kim, G., Behm, R. J., & Passerini, S. (2017) · ChemSusChem · doi:10.1002/cssc.201702021 · Cited by 87
Lee, J., Kim, J.-S., Kim, Y., Zang, D. S., & Paik, U. (2008) · Ultramicroscopy · doi:10.1016/j.ultramic.2008.04.027 · Cited by 83
Leijonmarck, S., Cornell, A., Lindbergh, G., & Wågberg, L. (2013) · Nano Energy · doi:10.1016/j.nanoen.2013.02.002 · Cited by 82
Effect of soluble polymer binder on particle distribution in a drying particulate coating
Buss, F., Roberts, C. C., Crawford, K. S., Peters, K., & Francis, L. F. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.03.054 · Cited by 78
Cost of automotive lithium-ion batteries operating at high upper cutoff voltages
Ahmed, S., Trask, S. E., Dees, D. W., Nelson, P. A., Lu, W., Dunlop, A. R., Polzin, B. J., & Jansen, A. N. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.09.037 · Cited by 78
Cobb, C. L., & Blanco, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.10.084 · Cited by 73
Microstructure Evolution in Lithium-Ion Battery Electrode Processing
Liu, Z., & Mukherjee, P. P. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.026408jes · Cited by 73
Facile Micro Templating LiFePO4 Electrodes for High Performance Li‐Ion Batteries
Singh, D. P., Mulder, F. M., Abdelkader, A. M., et al. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200704 · Cited by 64
Delattre, B., Bai, H., Ritchie, R. O., Coninck, J. D., & Tomsia, A. P. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am403793x · Cited by 58
Mohanty, D., Li, J., Born, R., Maxey, L. C., Dinwiddie, R. B., Daniel, C., & Wood, D. L. (2013) · Analytical Methods · doi:10.1039/c3ay41140k · Cited by 58
Self-citationImpedance as a Tool for Investigating Aging in Lithium-Ion Porous Electrodes
Brown, S., Mellgren, N., Vynnycky, M., & Lindbergh, G. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2832654 · Cited by 54
Cost savings for manufacturing lithium batteries in a flexible plant
Nelson, P. A., Ahmed, S., Gallagher, K. G., & Dees, D. W. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.02.142 · Cited by 52
Mesoscale Elucidation of the Influence of Mixing Sequence in Electrode Processing
Liu, Z., Battaglia, V., & Mukherjee, P. P. (2014) · Langmuir · doi:10.1021/la5038469 · Cited by 51
Production Processes for Fabrication of Lithium-Ion Batteries
Tagawa, K., & Brodd, R. J. (2008) · Springer eBooks · doi:10.1007/978-0-387-34445-4_8 · Cited by 44
Improving Li-ion battery charge rate acceptance through highly ordered hierarchical electrode design
Kim, Y., Drews, A. R., Chandrasekaran, R., Miller, T. J., & Sakamoto, J. S. (2018) · Ionics · doi:10.1007/s11581-018-2502-x · Cited by 43
Cobb, C. L., & Solberg, S. E. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0101707jes · Cited by 41
Impedance as a Tool for Investigating Aging in Lithium-Ion Porous Electrodes
Mellgren, N., Brown, S., Vynnycky, M., & Lindbergh, G. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2840015 · Cited by 38
Interaction analysis between binder and particles in multiphase slurries
Cho, K. Y., Kwon, Y. I., Youn, J. R., & Song, Y. S. (2013) · The Analyst · doi:10.1039/c3an36720g · Cited by 33
Designing the 3D-microbattery geometry using the level-set method
Zadin, V., Brandell, D., Kasemägi, H., Lellep, J., & Aabloo, A. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.004 · Cited by 28
Towards high durable lithium ion batteries with waterborne LiFePO 4 electrodes
Kvasha, A., Urdampilleta, I., de Meatza, I., Bengoechea, M., Blázquez, J. A., Yate, L., Miguel, O., & Grande, H. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.08.021 · Cited by 24
Das, P. R., Komsiyska, L., Osters, O., & Wittstock, G. (2016) · Synthetic Metals · doi:10.1016/j.synthmet.2016.02.011 · Cited by 23
Electrode Slurry Particle Density Mapping Using X-ray Radiography
Higa, K., Zhao, H., Parkinson, D. Y., Barnard, H. S., Ling, M., Liu, G., & Srinivasan, V. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1171702jes · Cited by 20
Cited by
Duffner, F., Kronemeyer, N., Tübke, J., Leker, J., Winter, M., & Schmuch, R. (2021) · Nature Energy · doi:10.1038/s41560-020-00748-8 · Cited by 1,335
Li, J., Fleetwood, J., Hawley, W. B., & Kays, W. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00565 · Cited by 895
Self-citationLithium-ion batteries – Current state of the art and anticipated developments
Armand, M., Axmann, P., Bresser, D., Copley, M., Edström, K., Ekberg, C., Guyomard, D., Lestriez, B., Novák, P., Petranikova, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228708 · Cited by 888
Zinc-ion batteries for stationary energy storage
Gourley, S. W. D., Brown, R., Adams, B. D., & Higgins, D. (2023) · Joule · doi:10.1016/j.joule.2023.06.007 · Cited by 482
Quilty, C. D., Wu, D., Li, W., Bock, D. C., Wang, L., Housel, L. M., Abraham, A., Takeuchi, K. J., Marschilok, A. C., & Takeuchi, E. S. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00214 · Cited by 388
Metadata
- Authors
- Hawley, W. B., & Li, J.
- Venue
- Journal of Energy Storage
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 25
- Pages
- 100862
- ISSN
- 2352-152X (ISSN-L)
- OpenAlex
- W2964597834
- Cited by
- 374
- References
- 80
- FWCI
- 10.31
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.