The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Recent development on the uses of alternative fuels in cement manufacturing process
Open accessAbstract
Abstract Cement manufacturing is one of the leading energy consuming and heavy pollutant processes which is accountable for CO 2 , NO X , SO 2 emissions and some heavy metal discharge from the pre-calciner kiln system. In past few decades there has been an enormous amount of researches to reduce the energy and environmental cost by using alternative fuel and raw material. In recent years utilisation of alternative fuels in cement manufacturing has gained a wide attention due to its effectiveness in substituting the thermal energy requirement from fossil fuels and reducing the pollutant emission. Alkaline environment, high temperature and long residence time allow rotary kiln to burn a wide range of waste and hazardous material. Recent development on the usage of alternative fuels in cement industry is presented in this paper and many of the research articles relevant to this study is reviewed and discussed. Studies on the impact of alternative fuels on environmental emission have also been included in this review. This paper provides a thorough understanding and status of alternative fuels and their usage in cement industry and highlights their positive impact on environment. This study offers a guideline for planning and implementing alternative fuel usage in cement industry around the world, particularly in Australia. The paper revealed that meat and bone meal (MBM) could be the best alternative fuel option for Australia with a substitution rate of 40%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recycling and recovery routes of plastic solid waste (PSW): A review
Al-Salem, S. M., Lettieri, P., & Baeyens, J. (2009) · Waste Management · doi:10.1016/j.wasman.2009.06.004 · Cited by 2,404
Application of multi-criteria decision making to sustainable energy planning—A review
Pohekar, S. D., & Ramachandran, M. (2004) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2003.12.007 · Cited by 1,938
Sustainable cement production—present and future
Schneider, M., Romer, M., Tschudin, M., & Bolio, H. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.019 · Cited by 1,643
Oxy-fuel combustion technology for coal-fired power generation
Buhre, B. J. P., Elliott, L. K., Sheng, C. D., Gupta, R. P., & Wall, T. F. (2005) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2005.07.001 · Cited by 1,542
Utilization of sewage sludge in EU application of old and new methods—A review
Fytili, D., & Zabaniotou, A. (2008) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2006.05.014 · Cited by 1,457
Combustion of agricultural residues
Werther, J., Saenger, M., Hartge, E.-U., Ogada, T., & Siagi, Z. (2000) · Progress in Energy and Combustion Science · doi:10.1016/s0360-1285(99)00005-2 · Cited by 1,123
Werther, J., & Ogada, T. (1999) · Progress in Energy and Combustion Science · doi:10.1016/s0360-1285(98)00020-3 · Cited by 1,093
Municipal solid waste management in China: Status, problems and challenges
Zhang, D. Q., Tan, S. K., & Gersberg, R. M. (2010) · Journal of Environmental Management · doi:10.1016/j.jenvman.2010.03.012 · Cited by 916
Co-firing of coal and biomass fuel blends
Sami, M., Annamalai, K., & Wooldridge, M. (2001) · Progress in Energy and Combustion Science · doi:10.1016/s0360-1285(00)00020-4 · Cited by 838
Calculation of higher heating values of biomass fuels
Demirbaş, A. (1997) · Fuel · doi:10.1016/s0016-2361(97)85520-2 · Cited by 817
An overview on oxyfuel coal combustion—State of the art research and technology development
Wall, T., Liu, Y., Spero, C., Elliott, L., Khare, S., Rathnam, R., Zeenathal, F., Moghtaderi, B., Buhre, B., Sheng, C., et al. (2009) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2009.02.005 · Cited by 803
A critical review on energy use and savings in the cement industries
Madlool, N. A., Saidur, R., Hossain, M. S., & Rahim, N. A. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.01.005 · Cited by 729
Biomass cofiring: the technology, the experience, the combustion consequences
Tillman, D. A. (2000) · Biomass and Bioenergy · doi:10.1016/s0961-9534(00)00049-0 · Cited by 536
Al-Salem, S. M., Lettieri, P., & Baeyens, J. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.09.001 · Cited by 528
Cement Manufacture and the Environment. Part II: Environmental Challenges and Opportunities
van Oss, H. G., & Padovani, A. C. (2003) · Journal of Industrial Ecology · doi:10.1162/108819803766729212 · Cited by 413
Sustainable cofiring of biomass with coal
Demirbaş, A. (2003) · Energy Conversion and Management · doi:10.1016/s0196-8904(02)00144-9 · Cited by 346
Cement Manufacture and the Environment: Part I: Chemistry and Technology
van Oss, H. G., & Padovani, A. C. (2002) · Journal of Industrial Ecology · doi:10.1162/108819802320971650 · Cited by 237
Resource recovery from used rubber tires
Amari, T., Themelis, N. J., & Wernick, I. K. (1999) · Resources Policy · doi:10.1016/s0301-4207(99)00025-2 · Cited by 228
Cement industry: sustainability, challenges and perspectives
Rodrigues, F. A., & Joekes, I. (2011) · Environmental Chemistry Letters · doi:10.1007/s10311-010-0302-2 · Cited by 199
DEYDIER, E., GUILET, R., SARDA, S., & SHARROCK, P. (2005) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2005.02.003 · Cited by 198
Cement manufacturing using alternative fuels and the advantages of process modelling
Kääntee, U., Zevenhoven, R., Backman, R., & Hupa, M. (2004) · Fuel Processing Technology · doi:10.1016/s0378-3820(03)00203-0 · Cited by 195
Kikuchi, R. (2001) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(00)00077-x · Cited by 180
Hashimoto, S., Fujita, T., Geng, Y., & Nagasawa, E. (2010) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2009.11.013 · Cited by 166
Organic and inorganic pollutants from cement kiln stack feeding alternative fuels
Conesa, J. A., Gálvez, A., Mateos, F. L., Martı́n-Gullón, I., & Font, R. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.01.116 · Cited by 146
Meat waste treatment methods and potential uses
Arvanitoyannis, I. S., & Ladas, D. (2008) · International Journal of Food Science & Technology · doi:10.1111/j.1365-2621.2006.01492.x · Cited by 146
Courtemanche, B. (1998) · Fuel · doi:10.1016/s0016-2361(97)00191-9 · Cited by 141
Impact of Alternative Fuels on the Cement Manufacturing Plant Performance: An Overview
Rahman, A., Rasul, M. G., Khan, M. M. K., & Sharma, S. C. (2013) · Procedia Engineering · doi:10.1016/j.proeng.2013.03.138 · Cited by 123
Self-citationUse of alternative fuels in the Polish cement industry
Mokrzycki, E., Uliasz-Bocheńczyk, A., & Sarna, M. (2003) · Applied Energy · doi:10.1016/s0306-2619(02)00136-8 · Cited by 120
Green energy at cement kiln in Cyprus—Use of sewage sludge as a conventional fuel substitute
Zabaniotou, A. A., & Theofilou, C. (2006) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2006.07.017 · Cited by 115
Nikolopoulos, N., Nikolopoulos, A., Karampinis, E., Grammelis, P., & Kakaras, E. C. (2010) · Fuel · doi:10.1016/j.fuel.2010.08.007 · Cited by 108
End life tyres: Alternative final disposal processes compared by LCA
Corti, A. (2004) · Energy · doi:10.1016/j.energy.2004.03.014 · Cited by 108
Pyrolysis and Combustion Characteristics of Biomass and Waste-Derived Feedstock
Skodras, G., Grammelis, P., Basinas, P., Kakaras, E. C., & Sakellaropoulos, G. P. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie060107g · Cited by 106
Bhuiyan, A. A., & Naser, J. (2014) · Fuel · doi:10.1016/j.fuel.2014.08.034 · Cited by 105
Strazza, C., Borghi, A. D., Gallo, M., & Borghi, A. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.05.014 · Cited by 98
Use of tire derived fuel in clinker burning
Pipilikaki, P., Katsioti, M., Papageorgiou, D., Fragoulis, D., & Chaniotakis, E. (2005) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2005.03.009 · Cited by 97
Biomass as the Renewable Energy Sources in Malaysia: An Overview
Chuah, T. G., Ghani, W. A. W. A. K., Robiah, Y., & Omar, R. (2006) · International Journal of Green Energy · doi:10.1080/01971520600704779 · Cited by 93
Cartmell, E., Gostelow, P., Riddell-Black, D., Simms, N. J., Oakey, J. E., Morris, J., Jeffrey, P. J., Howsam, P., & Pollard, S. (2005) · Environmental Science & Technology · doi:10.1021/es052181g · Cited by 92
Direct liquefaction of waste plastics and coliquefaction of coal-plastic mixtures
Feng, Z., Zhao, J., Rockwell, J., Bailey, D., & HUFFMAN, G. P. (1996) · Fuel Processing Technology · doi:10.1016/s0378-3820(96)01036-3 · Cited by 82
Garg, A., Smith, R., Hill, D., et al. (2009) · Waste Management · doi:10.1016/j.wasman.2009.03.031 · Cited by 80
Ninomiya, Y., Zhang, L., Sakano, T., Kanaoka, C., & Masui, M. (2003) · Fuel · doi:10.1016/j.fuel.2003.09.022 · Cited by 76
Seyler, C., Hofstetter, T. B., & Hungerbühler, K. (2005) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2005.05.009 · Cited by 71
Alternative Fuels in Cement Manufacturing
Moses, P. M. (2011) · InTech eBooks · doi:10.5772/22319 · Cited by 58
Prisciandaro, M., di Celso, G. M., & Veglio', F. (2003) · Resources Conservation and Recycling · doi:10.1016/s0921-3449(02)00170-2 · Cited by 57
Seyler, C., Hellweg, S., Monteil, M., & Hungerbühler, K. (2004) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2004.08.173 · Cited by 52
A survey of tire burning technology for the cement industry
Schrama, H., Blumenthal, M. H., & Weatherhead, E. C. (2002) · Conference record - IEEE Cement Industry Technical Conference · doi:10.1109/citcon.1995.514339 · Cited by 8
Cited by
Cement industry greenhouse gas emissions – management options and abatement cost
Kajaste, R., & Hurme, M. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.07.055 · Cited by 584
Barbhuiya, S., Kanavaris, F., Das, B. B., & Idrees, M. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.108861 · Cited by 378
Municipal sewage sludge incineration and its air pollution control
Liang, Y., Xu, D., Feng, P., Hao, B., Guo, Y., & Wang, S. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126456 · Cited by 325
Comparative LCA on using waste materials in the cement industry: A Hong Kong case study
Hossain, M. U., Poon, C. S., Lo, I. M. C., & Cheng, J. C. P. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2016.12.012 · Cited by 272
Malico, I., Nepomuceno Pereira, R., Gonçalves, A. C., & Sousa, A. M. O. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.06.022 · Cited by 253
Metadata
- Authors
- Rahman, A., Rasul, M. G., Khan, M. M. K., & Sharma, S.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2015-04
- Volume
- 145
- Pages
- 84-99
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W2073020087
- Cited by
- 282
- References
- 45
- FWCI
- 21.09
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.