The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy
Open accessAbstract
During the development of a processing route for the Selective Laser Melting (SLM) powder-bed fabrication of the nickel superalloy CM247LC it has been observed that the ‘island’ scan-strategy used as standard by the Concept Laser M2 SLM powder-bed system strongly influences the grain structure of the material. Optical and SEM micrographs are presented to show the observed grain structure in the SLM fabricated and Hot Isostatically Pressed (HIPped) material. The repeating pattern shown in the grain structure has been linked to the overlapping of the ‘island’ pattern used as standard in the Concept Laser M2 powder-bed facility. It is suggested that the formation of this bi-modal grain structure can be linked to the heat transfer away from the solidifying melt pool. The concept of a ‘band’ heating effect across each ‘island’ rather than ‘moving point’ heating has been suggested and has been supported by Electron Back Scattered Diffraction (EBSD) evidence. For comparison an EBSD map from a sample formed using a simple ‘back-and-forth’ strategy has also been presented and reveals a dramatically different grain structure and crystallographic orientation. MicroCT evidence, supported by SEM microscopy, shows that in the as-fabricated material the bimodal structure caused by the ‘island’ scan-strategy translates directly into the macroscopic pattern for the regions of extensive weld cracking associated with the SLM fabrication of γ′ hardenable materials. Similar microCT data has shown that HIPping can effectively close the internal cracks to provide a retro-fix solution.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Superalloys: Fundamentals and Applications
Reed, R. C. (2008) · Cited by 3,725
The Superalloys: Fundamentals and Applications
Reed, R. C. (2006) · Cambridge University Press eBooks · doi:10.1017/cbo9780511541285 · Cited by 2,369
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Superalloys: A Technical Guide
Donachie, M. J., & Donachie, S. J. (2002) · Cited by 1,160
Levy, G. N., Schindel, R., & Kruth, J. P. (2003) · CIRP Annals · doi:10.1016/s0007-8506(07)60206-6 · Cited by 1,121
Physical Aspects of Process Control in Selective Laser Sintering of Metals
Das, S. (2003) · Advanced Engineering Materials · doi:10.1002/adem.200310099 · Cited by 434
Kelly, S. M., & Kampe, S. L. (2004) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-004-0094-8 · Cited by 423
Vilaro, T., Colin, C., Bartout, J. D., Nazé, L., & Sennour, M. (2012) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.11.092 · Cited by 381
Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy
Liu, F., Lin, X., Yang, G., Song, M., Chen, J., & Huang, W. (2010) · Optics & Laser Technology · doi:10.1016/j.optlastec.2010.06.015 · Cited by 348
Carter, L. N., Attallah, M. M., & Reed, R. C. (2012) · Wiley eBooks · doi:10.1002/9781118516430.ch64 · Cited by 342
Self-citation
Cited by
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Aboulkhair, N. T., Simonelli, M., Parry, L., Ashcroft, I., Tuck, C., & Hague, R. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100578 · Cited by 1,552
Kok, Y., Tan, X. P., Wang, P., Nai, M. L. S., Loh, N. H., Liu, E., & Tor, S. B. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.11.021 · Cited by 1,447
Zhang, J., Song, B., Wei, Q., Bourell, D., & Shi, Y. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2018.09.004 · Cited by 1,205
Additive manufacturing of fatigue resistant materials: Challenges and opportunities
Yadollahi, A., & Shamsaei, N. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.01.001 · Cited by 1,023
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
“The different material-dependent mechanisms for which cracks may originate in PBF were studied by different authors (Carter et al., 2014; Harrison et al., 2015; Zhong et al., 2005; Dye et al., 2001).”
Sun, Z., Tan, X., Tor, S. B., & Chua, C. K. (2018) · NPG Asia Materials · doi:10.1038/s41427-018-0018-5 · Cited by 627
Revisiting fundamental welding concepts to improve additive manufacturing: From theory to practice
Oliveira, J. P., Santos, T. G., & Miranda, R. M. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100590 · Cited by 617
Dehoff, R. R., Kirka, M. M., Sames, W. J., Bilheux, H., Tremsin, A. S., Lowe, L. E., & Babu, S. S. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000734 · Cited by 555
Suryawanshi, J., Prashanth, K. G., Scudino, S., Eckert, J., Prakash, O., & Ramamurty, U. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.009 · Cited by 549
Powder Bed Fusion of nickel-based superalloys: A review
Sanchez, S., Smith, P., Xu, Z., Gaspard, G., Hyde, C. J., Wits, W. W., Ashcroft, I. A., Chen, H., & Clare, A. T. (2021) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2021.103729 · Cited by 541
Mostafaei, A., Ghiaasiaan, R., Ho, I.-T., Strayer, S., Chang, K.-C., Shamsaei, N., Shao, S., Paul, S., Yeh, A.-C., Tin, S., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101108 · Cited by 531
Mechanistic models for additive manufacturing of metallic components
Wei, H. L., Mukherjee, T., Zhang, W., Zuback, J. S., Knapp, G. L., De, A., & DebRoy, T. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100703 · Cited by 530
Narasimharaju, S. R., Zeng, W., See, T. L., Zhu, Z., Scott, P., Jiang, X., & Lou, S. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.12.033 · Cited by 508
Trevisan, F., Calignano, F., Lorusso, M., Pakkanen, J., Aversa, A., Ambrosio, E., Lombardi, M., Fino, P., & Manfredi, D. (2017) · Materials · doi:10.3390/ma10010076 · Cited by 502
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Gokcekaya, O., Ishimoto, T., Hibino, S., Yasutomi, J., Narushima, T., & Nakano, T. (2021) · Acta Materialia · doi:10.1016/j.actamat.2021.116876 · Cited by 459
Song, B., Zhao, X., Li, S., Han, C., Wei, Q., Wen, S., Liu, J., & Shi, Y. (2015) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-015-0341-2 · Cited by 427
Casalino, G., Campanelli, S. L., Contuzzi, N., & Ludovico, A. D. (2015) · Optics & Laser Technology · doi:10.1016/j.optlastec.2014.07.021 · Cited by 412
From Topology Optimization Design to Additive Manufacturing: Today’s Success and Tomorrow’s Roadmap
Meng, L., Zhang, W., Quan, D., Shi, G., Tang, L., Hou, Y., Breitkopf, P., Zhu, J., & Gao, T. (2020) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-019-09331-1 · Cited by 402
Fracture and fatigue in additively manufactured metals
Becker, T. H., Kumar, P., & Ramamurty, U. (2021) · Acta Materialia · doi:10.1016/j.actamat.2021.117240 · Cited by 377
Simulation of metal additive manufacturing microstructures using kinetic Monte Carlo
Rodgers, T. M., Madison, J. D., & Tikare, V. (2017) · Computational Materials Science · doi:10.1016/j.commatsci.2017.03.053 · Cited by 369
Epitaxy and Microstructure Evolution in Metal Additive Manufacturing
Basak, A., & Das, S. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031728 · Cited by 363
Tradowsky, U., White, J., Ward, R. M., Read, N., Reimers, W., & Attallah, M. M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.066 · Cited by 332
Self-citationAdditive manufacturing of Ni-based superalloys: The outstanding issues
Attallah, M. M., Jennings, R., Wang, X., & Carter, L. N. (2016) · MRS Bulletin · doi:10.1557/mrs.2016.211 · Cited by 318
Self-citationResearch status of laser additive manufacturing for metal: a review
Gong, G., Ye, J., Chi, Y., Zhao, Z., Wang, Z., Xia, G., Du, X., Tian, H., Yu, H., & Chen, C. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.08.050 · Cited by 318
Textures formed in a CoCrMo alloy by selective laser melting
Zhou, X., Li, K., Zhang, D., Liu, X., Ma, J., Liu, W., & Shen, Z. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.01.096 · Cited by 291
Divya, V. D., Muñoz-Moreno, R., Messé, O. M. D. M., Barnard, J. S., Baker, S., Illston, T., & Stone, H. J. (2016) · Materials Characterization · doi:10.1016/j.matchar.2016.02.004 · Cited by 280
Sun, Y., Hebert, R. J., & Aindow, M. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.07.015 · Cited by 277
Guo, C., Li, G., Li, S., Hu, X., Lu, H., Li, X., Xu, Z., Chen, Y., Li, Q., Lu, J., et al. (2023) · Nano Materials Science · doi:10.1016/j.nanoms.2022.08.001 · Cited by 273
Tan, C., Zhou, K., Kuang, M., Ma, W., & Kuang, T. (2018) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2018.1527645 · Cited by 264
AlMangour, B., Grzesiak, D., & Yang, J.-M. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.08.022 · Cited by 259
Metadata
- Authors
- Carter, L. N., Martin, C., Withers, P. J., & Attallah, M. M.
- Venue
- Journal of Alloys and Compounds
- Publisher
- Elsevier BV
- Published
- 2014-12
- Volume
- 615
- Pages
- 338-347
- ISSN
- 0925-8388 (ISSN-L)
- OpenAlex
- W1990851747
- Cited by
- 751
- References
- 13
- FWCI
- 41.68
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.