The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Life-cycle energy analysis of prefabricated building components: an input–output-based hybrid model
Open accessAbstract
As an effective strategy for improving the productivity of the construction industry, prefabricated construction has attracted concerns worldwide. This study investigated the life-cycle energy use of prefabricated components and the corresponding effect on the total embodied energy use for a number of real building projects. Result showed that the life-cycle energy use of prefabricated components ranged from 7.33 GJ/m3 for precast staircase to 13.34 GJ/m3 for precast form. The recycling process could achieve 16%–24% energy reduction. This study also found that apart from reusability, energy savings are also obtained from waste reduction and high quality control, saving 4%–14% of the total life-cycle energy consumption. All these advantages can be regarded as important environment friendly strategies provided by precast construction. The linear regression analysis indicated that the average increment in energy use was nearly linearly correlated with prefabrication rate. Precast facade and form are identified as energy-intensive components compared with the conventional construction method. Therefore, the challenge lies in improving the integrality and quality of the prefabrication technique while reducing its dependence on energy-intensive materials. Besides, attention should be focused on improving the maturity of the precast market to avoid additional energy consumption during prophase investigation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Indicated, N. (2010) · Joint Research Centre (European Commission) · doi:10.2788/38479 · Cited by 1,038
System Boundary Selection in Life-Cycle Inventories Using Hybrid Approaches
Suh, S., Lenzen, M., Treloar, G. J., Hondo, H., Horvath, A., Huppes, G., Jolliet, O., Klann, U., Krewitt, W., Moriguchi, Y., et al. (2004) · Environmental Science & Technology · doi:10.1021/es0263745 · Cited by 1,025
Scheuer, C., Keoleian, G. A., & Reppe, P. (2003) · Energy and Buildings · doi:10.1016/s0378-7788(03)00066-5 · Cited by 728
Towards adoption of prefabrication in construction
Tam, V. W. Y., Tam, C. M., Zeng, S. X., & Ng, W. C. Y. (2007) · Building and Environment · doi:10.1016/j.buildenv.2006.10.003 · Cited by 628
Product Environmental Life‐Cycle Assessment Using Input‐Output Techniques
Joshi, S. (1999) · Journal of Industrial Ecology · doi:10.1162/108819899569449 · Cited by 567
Bullard, C. W., Penner, P. S., & Pilati, D. A. (1978) · Resources and Energy · doi:10.1016/0165-0572(78)90008-7 · Cited by 533
Mao, C., Shen, Q., Shen, L., & Tang, L. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.07.033 · Cited by 513
Self-citationLife cycle of buildings, demolition and recycling potential: A case study in Turin, Italy
Blengini, G. A. (2009) · Building and Environment · doi:10.1016/j.buildenv.2008.03.007 · Cited by 492
A review on the viable technology for construction waste recycling
Tam, V. W. Y., & Tam, C. M. (2006) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2005.12.002 · Cited by 477
Life cycle greenhouse gas emissions and energy analysis of prefabricated reusable building modules
Aye, L., Ngo, T., Crawford, R. H., Gammampila, R., & Mendis, P. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2011.11.049 · Cited by 466
Treloar, G. J. (1997) · Economic Systems Research · doi:10.1080/09535319700000032 · Cited by 447
The effect of material choice on the total energy need and recycling potential of a building
Thormark, C. (2006) · Building and Environment · doi:10.1016/j.buildenv.2005.04.026 · Cited by 431
Comparative environmental life cycle assessment of green roofs
Kosareo, L. M., & Ries, R. J. (2006) · Building and Environment · doi:10.1016/j.buildenv.2006.06.019 · Cited by 370
Jaillon, L., & Poon, C. S. (2009) · Automation in Construction · doi:10.1016/j.autcon.2008.09.002 · Cited by 367
A life-cycle energy analysis of building materials in the Negev desert
Huberman, N., & Pearlmutter, D. (2008) · Energy and Buildings · doi:10.1016/j.enbuild.2007.06.002 · Cited by 346
Analysis of embodied energy use in the residential building of Hong Kong
Chen, T. Y., Burnett, J., & Chau, C. K. (2001) · Energy · doi:10.1016/s0360-5442(01)00006-8 · Cited by 341
Validation of a hybrid life-cycle inventory analysis method
Crawford, R. H. (2008) · Journal of Environmental Management · doi:10.1016/j.jenvman.2007.03.024 · Cited by 340
Scenarios for applying RFID technology in construction project management
Lu, W., Huang, G. Q., & Li, H. (2011) · Automation in Construction · doi:10.1016/j.autcon.2010.09.007 · Cited by 261
Monteiro, H., & Freire, F. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2011.12.032 · Cited by 243
Wang, J., Li, Z., & Tam, V. W. Y. (2014) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2013.11.003 · Cited by 218
Self-citationMeasuring the impact of prefabrication on construction waste reduction: An empirical study in China
Li, Z., Shen, G. Q., & Alshawi, M. (2014) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2014.07.013 · Cited by 209
Self-citationLu, W., & Yuan, H. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.08.048 · Cited by 196
Life cycle energy consumption and CO2 emission of an office building in China
Wu, H. J., Yuan, Z. W., Zhang, L., & Bi, J. (2012) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-011-0342-2 · Cited by 193
Using national input/output data for embodied energy analysis of individual residential buildings
Treloar, G. J., Love, P. E. D., & Holt, G. D. (2001) · Construction Management and Economics · doi:10.1080/014461901452076 · Cited by 173
BEPAS—a life cycle building environmental performance assessment model
Zhang, Z., Wu, X., Yang, X., & Zhu, Y. (2006) · Building and Environment · doi:10.1016/j.buildenv.2005.02.028 · Cited by 162
Embodied energy in buildings: wood versus concrete—reply to Börjesson and Gustavsson
Lenzen, M., & Treloar, G. (2002) · Energy Policy · doi:10.1016/s0301-4215(01)00142-2 · Cited by 159
A hybrid life cycle assessment method for construction
Treloar, G. J., Love, P. E. D., Faniran, O. O., & Iyer-Raniga, U. (2000) · Construction Management and Economics · doi:10.1080/014461900370898 · Cited by 159
A quantitative approach to the assessment of the environmental impact of building materials
Harris, D. J. (1999) · Building and Environment · doi:10.1016/s0360-1323(98)00058-4 · Cited by 151
Energy impacts of recycling disassembly material in residential buildings
Gao, W., 有山, 高., OJIMA, T., & Meier, A. (2001) · Energy and Buildings · doi:10.1016/s0378-7788(00)00096-7 · Cited by 144
A methodology for estimating the life-cycle carbon efficiency of a residential building
Li, D. Z., Chen, H. X., Hui, E. C. M., Zhang, J. B., & Li, Q. (2012) · Building and Environment · doi:10.1016/j.buildenv.2012.09.012 · Cited by 143
Analysing the life-cycle energy of an Australian residential building and its householders
Treloar, G. J., Fay, R. M., Love, P. E. D., & Iyer‐Raniga, U. (2000) · Building Research & Information · doi:10.1080/096132100368957 · Cited by 136
Life cycle inventory of buildings: A contribution analysis
Verbeeck, G., & Hens, H. (2009) · Building and Environment · doi:10.1016/j.buildenv.2009.10.003 · Cited by 135
Conservation of energy and natural resources by recycling building waste
Thormark, C. (2001) · Resources Conservation and Recycling · doi:10.1016/s0921-3449(01)00078-7 · Cited by 117
Kua, H. W., & Wong, C. L. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.03.027 · Cited by 107
Assessing the End-of-Life Impacts of Buildings
Vieira, P. S., & Horvath, A. (2008) · Environmental Science & Technology · doi:10.1021/es071345l · Cited by 95
Rethinking prefabricated construction management using the VP‐based IKEA model in Hong Kong
Li, H., Guo, H. L., Skitmore, M., Huang, T., Chan, K. Y., & Chan, G. (2011) · Construction Management and Economics · doi:10.1080/01446193.2010.545994 · Cited by 94
A guide for managing and minimizing building and demolition waste
Poon, C. S., Yu, A. T. W., & Ng, L. H. (2001) · PolyU Institutional Research Archive (Hong Kong Polytechnic University) · Cited by 86
A hybrid life cycle assessment model for comparison with conventional methodologies in Australia
Rowley, H. V., Lundie, S., & Peters, G. M. (2009) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-009-0093-5 · Cited by 84
Life cycle water analysis of a residential building and its occupants
Crawford, R. H., & Pullen, S. (2011) · Building Research & Information · doi:10.1080/09613218.2011.584212 · Cited by 71
Disaggregated I-O LCA model for building product chain energy quantification: A case from China
Chang, Y., Ries, R. J., Man, Q., & Wang, Y. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2013.12.026 · Cited by 69
Comparative assessment of life cycle impacts of curtain wall mullions
Azari, R. S., & Kim, Y. (2011) · Building and Environment · doi:10.1016/j.buildenv.2011.09.010 · Cited by 31
Cited by
Oesterreich, T. D., & Teuteberg, F. (2016) · Computers in Industry · doi:10.1016/j.compind.2016.09.006 · Cited by 1,526
Barriers to promoting prefabricated construction in China: A cost–benefit analysis
Hong, J., Shen, G. Q., Li, Z., Zhang, B., & Zhang, W. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.171 · Cited by 503
Self-citationLi, C. Z., Xue, F., Li, X., Hong, J., & Shen, G. Q. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.01.001 · Cited by 420
Self-citationJin, R., Yuan, H., & Chen, Q. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.09.029 · Cited by 380
A holistic review of off-site construction literature published between 2008 and 2018
Jin, R., Gao, S., Cheshmehzangi, A., & Aboagye-Nimo, E. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.195 · Cited by 363
Metadata
- Authors
- Hong, J., Shen, G. Q., Mao, C., Li, Z., & Li, K.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2016-01
- Volume
- 112
- Pages
- 2198-2207
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W1748265057
- Cited by
- 304
- References
- 41
- FWCI
- 23.89
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.