The DOI matches its Crossref record; 95 of the 95 references it cites were found in a registry or an index.
Food packaging in the circular economy: Overview of chemical safety aspects for commonly used materials
Open accessAbstract
Food packaging facilitates storage, handling, transport, and preservation of food and is essential for preventing food waste. Besides these beneficial properties, food packaging causes rising concern for the environment due to its high production volume, often short usage time, and problems related to waste management and littering. Reduction, reuse, and recycling, but also redesign support the aims of the circular economy. These tools also have the potential to decrease the environmental impact of food packaging. In this article, we focus on chemical safety aspects of recycled food packaging, as recycling is currently seen as an important measure to manage packaging waste. However, recycling may increase the levels of potentially hazardous chemicals in the packaging and -after migration- in the food. Since exposure to certain chemicals migrating from food packaging has been associated with chronic diseases, it is of high importance to assess the safety of recycled packaging. Therefore, we describe recycling processes of commonly used food packaging materials, including plastics, paper and board, aluminum, steel, and multimaterial multilayers (e.g., beverage cartons). Further, we give an overview of typical migrants from all types of recycled food packaging materials, and summarize approaches to reduce chemical contamination. We discuss the role of food packaging in the circular economy, where recycling is only one of many complementary tools for providing environmentally-friendly and safe food packaging.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Circular Economy–A new sustainability paradigm?
Geissdoerfer, M., Savaget, P., Bocken, N. M. P., & Hultink, E. J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.048 · Cited by 9,360
Conceptualizing the circular economy: An analysis of 114 definitions
Kirchherr, J., Reike, D., & Hekkert, M. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.005 · Cited by 8,550
Ghisellini, P., Cialani, C., & Ulgiati, S. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.09.007 · Cited by 6,536
Mechanical and chemical recycling of solid plastic waste
Ragaert, K., Delva, L., & Van Geem, K. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.044 · Cited by 3,276
Plastics Recycling: Challenges and Opportunities
Hopewell, J., Dvorak, R., & Kosior, E. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0311 · Cited by 3,201
Stahel, W. R. (2016) · Nature · doi:10.1038/531435a · Cited by 2,555
Food Packaging—Roles, Materials, and Environmental Issues
Marsh, K., & Bugusu, B. (2007) · Journal of Food Science · doi:10.1111/j.1750-3841.2007.00301.x · Cited by 1,919
Organic fertilizer as a vehicle for the entry of microplastic into the environment
Weithmann, N., Möller, J. N., Löder, M. G. J., Piehl, S., Laforsch, C., & Freitag, R. (2018) · Science Advances · doi:10.1126/sciadv.aap8060 · Cited by 1,048
The history and current applications of the circular economy concept
Winans, K., Kendall, A., & Deng, H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.123 · Cited by 1,024
Green economy and related concepts: An overview
Loiseau, E., Saikku, L., Antikainen, R., Droste, N., Hansjürgens, B., Pitkänen, K., Leskinen, P., Kuikman, P., & Thomsen, M. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.08.024 · Cited by 863
Cited by
Mechanical Recycling of Packaging Plastics: A Review
Schyns, Z. O. G., & Shaver, M. P. (2021) · Macromolecular Rapid Communications · doi:10.1002/marc.202000415 · Cited by 1,643
Overview of known plastic packaging-associated chemicals and their hazards
Groh, K. J., Backhaus, T., Carney-Almroth, B., Geueke, B., Inostroza, P. A., Lennquist, A., Leslie, H. A., Maffini, M., Slunge, D., Trasande, L., et al. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.10.015 · Cited by 913
Self-citationDeep Dive into Plastic Monomers, Additives, and Processing Aids
Wiesinger, H., Wang, Z., & Hellweg, S. (2021) · Environmental Science & Technology · doi:10.1021/acs.est.1c00976 · Cited by 724
Politics and the plastic crisis: A review throughout the plastic life cycle
Nielsen, T. D., Hasselbalch, J., Holmberg, K., & Stripple, J. (2020) · WIREs Energy and Environment · doi:10.1002/wene.360 · Cited by 499
Bio-Based Packaging: Materials, Modifications, Industrial Applications and Sustainability
Reichert, C. L., Bugnicourt, E., Coltelli, M.-B., Cinelli, P., Lazzeri, A., Canesi, I., Braca, F., Martínez, B. M., Alonso, R., Agostinis, L., et al. (2020) · Polymers · doi:10.3390/polym12071558 · Cited by 495
Consumers’ response to environmentally-friendly food packaging - A systematic review
Ketelsen, M., Janssen, M., & Hamm, U. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120123 · Cited by 454
Sustainable and Bio-Based Food Packaging: A Review on Past and Current Design Innovations
Versino, F., Ortega, F., Monroy, Y., Rivero, S., López, O. V., & García, M. A. (2023) · Foods · doi:10.3390/foods12051057 · Cited by 422
Tyagi, P., Salem, K. S., Hubbe, M. A., & Pal, L. (2021) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2021.06.036 · Cited by 387
Food packaging and sustainability – Consumer perception vs. correlated scientific facts: A review
Otto, S., Strenger, M., Maier-Nöth, A., & Schmid, M. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126733 · Cited by 379
Osorio, L. L. D. R., Flórez-López, E., & Grande-Tovar, C. D. (2021) · Molecules · doi:10.3390/molecules26020515 · Cited by 367
Human health impacts of exposure to phthalate plasticizers: An overview of reviews
Eales, J., Bethel, A., Galloway, T., Hopkinson, P., Morrissey, K., Short, R. E., & Garside, R. (2022) · Environment International · doi:10.1016/j.envint.2021.106903 · Cited by 367
Matthews, C., Moran, F., & Jaiswal, A. K. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.125263 · Cited by 358
Sustainable packaging for supply chain management in the circular economy: A review
Meherishi, L., Narayana, S. A., & Ranjani, K. S. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.07.057 · Cited by 341
Microplastics from consumer plastic food containers: Are we consuming it?
Fadare, O. O., Wan, B., Guo, L.-H., & Zhao, L. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.126787 · Cited by 329
Recent trends and applications of cellulose nanocrystals in food industry
Mu, R., Hong, X., Ni, Y., Li, Y., Pang, J., Wang, Q., Xiao, J., & Zheng, Y. (2019) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2019.09.013 · Cited by 322
Review of polymer technologies for improving the recycling and upcycling efficiency of plastic waste
Jung, H., Shin, G., Kwak, H., Hao, L. T., Jegal, J., Kim, H. J., Jeon, H., Park, J., & Oh, D. X. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.138089 · Cited by 271
Jadhav, E. B., Sankhla, M. S., Bhat, R. A., & Bhagat, D. S. (2021) · Environmental Nanotechnology, Monitoring & Management · doi:10.1016/j.enmm.2021.100608 · Cited by 266
Impacts of food contact chemicals on human health: a consensus statement
Muncke, J., Andersson, A.-M., Backhaus, T., Boucher, J. M., Carney Almroth, B., Castillo Castillo, A., Chevrier, J., Demeneix, B. A., Emmanuel, J. A., Fini, J.-B., et al. (2020) · Environmental Health · doi:10.1186/s12940-020-0572-5 · Cited by 264
Self-citationCiccullo, F., Cagliano, R., Bartezzaghi, G., & Perego, A. (2021) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2020.105114 · Cited by 261
Food Packaging Materials with Special Reference to Biopolymers-Properties and Applications
Agarwal, A., Shaida, B., Rastogi, M., & Singh, N. B. (2023) · Chemistry Africa · doi:10.1007/s42250-022-00446-w · Cited by 259
Muranko, Ż., Tassell, C., Zeeuw van der Laan, A., & Aurisicchio, M. (2021) · Sustainability · doi:10.3390/su13052609 · Cited by 89
Dedieu, I., Peyron, S., Gontard, N., & Aouf, C. (2022) · Polymer Testing · doi:10.1016/j.polymertesting.2022.107620 · Cited by 84
Plastic packaging flows in Europe: A hybrid input‐output approach
Cimpan, C., Bjelle, E. L., & Strømman, A. H. (2021) · Journal of Industrial Ecology · doi:10.1111/jiec.13175 · Cited by 62
“The only plastic type with a relatively high chain efficiency was PET, where established systems already exist that preserve quality, including for food grade closed loop recycling (Geueke et al., 2018;Welle, 2011).”
BackgroundLife cycle assessment of reusable plastic food packaging
Yadav, P., Silvenius, F., Katajajuuri, J.-M., & Leinonen, I. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.141529 · Cited by 59
Minet, L., Wang, Z., Shalin, A., Bruton, T. A., Blum, A., Peaslee, G. F., Schwartz-Narbonne, H., Venier, M., Whitehead, H., Wu, Y., et al. (2022) · Environmental Science: Processes & Impacts · doi:10.1039/d2em00166g · Cited by 43
Mofokeng, N. N., Madikizela, L. M., Tiggelman, I., Sanganyado, E., & Chimuka, L. (2024) · Environmental Science and Pollution Research · doi:10.1007/s11356-024-33250-9 · Cited by 9
“The true contribution of PFAS from paper recycling processes is currently not fully understood in developed and developing countries (Geueke et al. 2018).”
Background
Metadata
- Authors
- Geueke, B., Groh, K., & Muncke, J.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2018-08
- Volume
- 193
- Pages
- 491-505
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2799302907
- Cited by
- 673
- References
- 95
- FWCI
- 21.45
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.