The DOI matches its Crossref record; 93 of the 93 references it cites were found in a registry or an index.
Lean manufacturing and sustainable performance: Trends and future challenges
Abstract
Abstract Lean manufacturing has proven its positive effects on operational and economic performance in multiple cases. However, growing consciousness regarding sustainability and the Triple Bottom Line approach requires an integral performance based on three main goals: economic growth, environmental preservation, and social responsibility. Given the relevance that lean manufacturing has acquired, it is important to understand its effects on sustainability. Thus, this paper presents a literature review, discussing the most relevant findings of research in this sphere, and identifying current trends concerning the effect of lean manufacturing on sustainable performance. A total of 69 papers were reviewed, following a five-step synthesis methodology. Common and contrasting results were categorized according to each pillar of the triple bottom line, which allowed for the identification of not only growing research trends, but also of knowledge gaps. Unlike previous literature reviews, this study approaches lean manufacturing's effect on performance from a multidimensional point of view, accounting for all three triple bottom line pillars. It contributes on the identification of the main current research trends, which favors branches: one which supports complementary interactions between lean manufacturing and all three pillars of the triple bottom line, and the other, which evidences trade-offs among them. According to the results of the review, knowledge gaps on the matter remain, which require further research.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Social Responsibility of Business Is to Increase Its Profits
Friedman, M. (2007) · Corporate Ethics and Corporate Governance · doi:10.1007/978-3-540-70818-6_14 · Cited by 11,733
From a literature review to a conceptual framework for sustainable supply chain management
Seuring, S., & Müller, M. (2008) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2008.04.020 · Cited by 6,341
Report of the World Commission on Environment and Development: "Our Common Future"
Al-Athel, S. A., Fadika, L. M., István, L., Shijun, M., de Botero, M. M., Singh, N. K., Noqueira-Nato, P., Ramphal, S., Ruckelshaus, W. D., Sahnoun, M., et al. (1987) · Cited by 5,750
Partnerships from cannibals with forks: The triple bottom line of 21st‐century business
Elkington, J. (1998) · Environmental Quality Management · doi:10.1002/tqem.3310080106 · Cited by 5,341
Towards the Sustainable Corporation: Win-Win-Win Business Strategies for Sustainable Development
Elkington, J. (1994) · California Management Review · doi:10.2307/41165746 · Cited by 3,952
(2004) · Cited by 3,245
Lean manufacturing: context, practice bundles, and performance
Shah, R., & Ward, P. T. (2003) · Journal of Operations Management · doi:10.1016/s0272-6963(02)00108-0 · Cited by 2,897
Zhu, Q., & Sarkis, J. (2004) · Journal of Operations Management · doi:10.1016/j.jom.2004.01.005 · Cited by 2,761
(1991) · HarperPerennial eBooks · Cited by 2,372
PAGELL, M., & WU, Z. (2009) · Journal of Supply Chain Management · doi:10.1111/j.1745-493x.2009.03162.x · Cited by 1,815
The Brundtland report: ‘Our common future’
Keeble, B. R. (1988) · Medicine and War · doi:10.1080/07488008808408783 · Cited by 1,238
Lasting improvements in manufacturing performance: In search of a new theory
Ferdows, K., & De Meyer, A. (1990) · Journal of Operations Management · doi:10.1016/0272-6963(90)90094-t · Cited by 1,230
Sustainable operations: Their impact on the triple bottom line
Gimenez, C., Sierra, V., & Rodon, J. (2012) · International Journal of Production Economics · doi:10.1016/j.ijpe.2012.01.035 · Cited by 1,019
Lean manufacturing: literature review and research issues
Bhamu, J., & Singh Sangwan, K. (2014) · International Journal of Operations & Production Management · doi:10.1108/ijopm-08-2012-0315 · Cited by 983
Elkington, J. (2013) · Routledge eBooks · doi:10.4324/9781849773348-1 · Cited by 948
Why Research in Sustainable Supply Chain Management Should Have no Future
Pagell, M., & Shevchenko, A. (2014) · Journal of Supply Chain Management · doi:10.1111/jscm.12037 · Cited by 885
The Triple Bottom Line: What Is It and How Does It Work?
Slaper, T. F., & Hall, T. J. (2011) · Cited by 840
Lean and Green: The Move to Environmentally Conscious Manufacturing
Florida, R. (1996) · California Management Review · doi:10.2307/41165877 · Cited by 769
Lean and green – a systematic review of the state of the art literature
Garza-Reyes, J. A. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.04.064 · Cited by 656
Geng, R., Mansouri, S. A., & Aktas, E. (2017) · International Journal of Production Economics · doi:10.1016/j.ijpe.2016.10.008 · Cited by 605
Green, lean, and global supply chains
Mollenkopf, D., Stolze, H., Tate, W. L., & Ueltschy, M. (2010) · International Journal of Physical Distribution & Logistics Management · doi:10.1108/09600031011018028 · Cited by 595
Extending the Horizons: Environmental Excellence as Key to Improving Operations
Corbett, C. J., & Klassen, R. D. (2006) · Manufacturing & Service Operations Management · doi:10.1287/msom.1060.0095 · Cited by 588
Lean Management, Supply Chain Management and Sustainability: A Literature Review
Martínez-Jurado, P. J., & Moyano-Fuentes, J. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.09.042 · Cited by 582
LEAN, GREEN, AND THE QUEST FOR SUPERIOR ENVIRONMENTAL PERFORMANCE
ROTHENBERG, S., PIL, F. K., & MAXWELL, J. (2001) · Production and Operations Management · doi:10.1111/j.1937-5956.2001.tb00372.x · Cited by 548
Cherrafi, A., Elfezazi, S., Chiarini, A., Mokhlis, A., & Benhida, K. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.08.101 · Cited by 502
Lean production: literature review and trends
Jasti, N. V. K., & Kodali, R. (2015) · International Journal of Production Research · doi:10.1080/00207543.2014.937508 · Cited by 485
Jabbour, C. J. C., Jabbour, A. B. L. D. S., Govindan, K., Teixeira, A. A., & Freitas, W. R. D. S. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.07.010 · Cited by 476
The impact of lean methods and tools on the operational performance of manufacturing organisations
Belekoukias, I., Garza-Reyes, J. A., & Kumar, V. (2014) · International Journal of Production Research · doi:10.1080/00207543.2014.903348 · Cited by 474
Four decades of lean: a systematic literature review
Stone, K. B. (2012) · International Journal of Lean Six Sigma · doi:10.1108/20401461211243702 · Cited by 393
The relationship between lean operations and sustainable operations
Piercy, N., & Rich, N. (2015) · International Journal of Operations & Production Management · doi:10.1108/ijopm-03-2014-0143 · Cited by 388
Mediated effect of environmental management on manufacturing competitiveness: An empirical study
Yang, C.-L., Lin, S.-P., Chan, Y.-H., & Sheu, C. (2010) · International Journal of Production Economics · doi:10.1016/j.ijpe.2009.08.017 · Cited by 383
Ceulemans, K., Molderez, I., & Van Liedekerke, L. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.09.052 · Cited by 372
Thanki, S., Govindan, K., & Thakkar, J. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.06.105 · Cited by 367
A Systematic Literature Review on Recent Lean Research: State‐of‐the‐art and Future Directions
Danese, P., Manfè, V., & Romano, P. (2018) · International Journal of Management Reviews · doi:10.1111/ijmr.12156 · Cited by 345
Manufacturing practices, strategic fit and performance: A routine‐based view
Ketokivi, M., & Schroeder, R. (2004) · International Journal of Operations & Production Management · doi:10.1108/01443570410514876 · Cited by 338
Chiarini, A. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.07.080 · Cited by 336
Helleno, A. L., de Moraes, A. J. I., & Simon, A. T. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.072 · Cited by 273
Influence of Green and Lean Upstream Supply Chain Management Practices on Business Sustainability
Azevedo, S. G., Carvalho, H., Duarte, S., & Cruz-Machado, V. (2012) · IEEE Transactions on Engineering Management · doi:10.1109/tem.2012.2189108 · Cited by 265
Impact of lean strategy on operational performance: a study of Thai manufacturing companies
Rahman, S., Laosirihongthong, T., & Sohal, A. S. (2010) · Journal of Manufacturing Technology Management · doi:10.1108/17410381011077946 · Cited by 244
Lean practices and their effect on performance: a literature review
Negrão, L. L. L., Godinho Filho, M., & Marodin, G. (2016) · Production Planning & Control · doi:10.1080/09537287.2016.1231853 · Cited by 243
Does Lean Improve Labor Standards? Management and Social Performance in the Nike Supply Chain
Distelhorst, G., Hainmueller, J., & Locke, R. M. (2017) · Management Science · doi:10.1287/mnsc.2015.2369 · Cited by 238
Leanness: experiences from the journey to date
Papadopoulou, T. C., & Özbayrak, M. (2005) · Journal of Manufacturing Technology Management · doi:10.1108/17410380510626196 · Cited by 236
Lean and Green strategy: the Lean and Green House and maturity deployment model
Verrier, B., Rose, B., & Caillaud, E. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.022 · Cited by 229
M.P., S., P.R., S., A., R., & P., B. A. (2017) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-12-2016-0188 · Cited by 223
Tools and techniques for enabling sustainability through lean initiatives
Vinodh, S., Arvind, K. R., & Somanaathan, M. (2011) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-010-0329-x · Cited by 219
Lean services: a systematic review
Gupta, S., Sharma, M., & Sunder M., V. (2016) · International Journal of Productivity and Performance Management · doi:10.1108/ijppm-02-2015-0032 · Cited by 219
A case study of lean, sustainable manufacturing
Standridge, C. R., Miller, G., & Pawloski, J. (2010) · Journal of Industrial Engineering and Management · doi:10.3926/jiem.2010.v3n1.p11-32 · Cited by 213
Lean and green in action: interdependencies and performance of pollution prevention projects
Galeazzo, A., Furlan, A., & Vinelli, A. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.10.015 · Cited by 210
Environmental and social sustainability priorities: Their integration in operations strategies
Longoni, A., & Cagliano, R. (2015) · International Journal of Operations & Production Management · doi:10.1108/ijopm-04-2013-0182 · Cited by 210
Internal lean practices and performance: The role of technological turbulence
Chavez, R., Yu, W., Jacobs, M., Fynes, B., Wiengarten, F., & Lecuna, A. (2015) · International Journal of Production Economics · doi:10.1016/j.ijpe.2014.10.005 · Cited by 200
Figge, F., & Hahn, T. (2012) · International Journal of Production Economics · doi:10.1016/j.ijpe.2012.02.001 · Cited by 199
When does lean hurt? – an exploration of lean practices and worker health and safety outcomes
Longoni, A., Pagell, M., Johnston, D., & Veltri, A. (2013) · International Journal of Production Research · doi:10.1080/00207543.2013.765072 · Cited by 194
Alhuraish, I., Robledo, C., & Kobi, A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.06.146 · Cited by 194
Martínez León, H. C., & Calvo-Amodio, J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.11.132 · Cited by 178
The role of New Forms of Work Organization in developing sustainability strategies in operations
Longoni, A., Golini, R., & Cagliano, R. (2014) · International Journal of Production Economics · doi:10.1016/j.ijpe.2013.09.009 · Cited by 174
Gualandris, J., Golini, R., & Kalchschmidt, M. (2014) · Supply Chain Management: An International Journal · doi:10.1108/scm-11-2013-0430 · Cited by 172
The role of manufacturing in affecting the social dimension of sustainability
Sutherland, J. W., Richter, J. S., Hutchins, M. J., Dornfeld, D., Dzombak, R., Mangold, J., Robinson, S., Hauschild, M. Z., Bonou, A., Schönsleben, P., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.003 · Cited by 172
Interrelationships among lean bundles and their effects on operational performance
Pont, G. D., Furlan, A., & Vinelli, A. (2008) · Operations Management Research · doi:10.1007/s12063-008-0010-2 · Cited by 166
Doing Well by Doing Good? The Self‐interest of Buying Firms and Sustainable Supply Chain Management
Busse, C. (2015) · Journal of Supply Chain Management · doi:10.1111/jscm.12096 · Cited by 164
Overall Environmental Equipment Effectiveness as a Metric of a Lean and Green Manufacturing System
Domingo, R., & Aguado, S. (2015) · Sustainability · doi:10.3390/su7079031 · Cited by 155
The Relationship between Lean and Sustainable Manufacturing on Performance: Literature Review
Hartini, S., & Ciptomulyono, U. (2015) · Procedia Manufacturing · doi:10.1016/j.promfg.2015.11.012 · Cited by 154
Integrating lean and green management
Hallam, C. R. A., & Contreras, C. (2016) · Management Decision · doi:10.1108/md-04-2016-0259 · Cited by 139
A case study of lean, sustainable manufacturing
Miller, G., Pawloski, J., & Standridge, C. R. (2010) · UPCommons institutional repository (Universitat Politècnica de Catalunya) · doi:10.3926/jiem..v3n1.p11-32 · Cited by 138
Singh, B., & Sharma, S. K. (2009) · Measuring Business Excellence · doi:10.1108/13683040910984338 · Cited by 133
Assessing the impact of just-in-time on operational performance at varying degrees of repetitiveness
Bortolotti, T., Danese, P., & Romano, P. (2012) · International Journal of Production Research · doi:10.1080/00207543.2012.678403 · Cited by 132
Addressing the Challenge of Modeling for Decision‐Making in Socially Responsible Operations
Besiou, M., & Wassenhove, L. N. V. (2015) · Production and Operations Management · doi:10.1111/poms.12375 · Cited by 122
Lean Six Sigma with environmental focus: review and framework
Ruben, R. B., Vinodh, S., & Asokan, P. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1148-6 · Cited by 116
Leveraging fitness and lean bundles to build the cumulative performance sand cone model
Bortolotti, T., Danese, P., Flynn, B. B., & Romano, P. (2014) · International Journal of Production Economics · doi:10.1016/j.ijpe.2014.09.014 · Cited by 115
The cumulative capability ‘sand cone’ model revisited: a new perspective for manufacturing strategy
Schroeder, R. G., Shah, R., & Peng, D. X. (2010) · International Journal of Production Research · doi:10.1080/00207543.2010.509116 · Cited by 114
Parallel models for lean and green operations
Bergmiller, G. G., & McCright, P. R. (n.d.) · Cited by 110
An empirical study on applicability of lean and green practices in the foundry industry
Prasad, S., Khanduja, D., & Sharma, S. K. (2016) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-08-2015-0058 · Cited by 108
The perceived impact of JIT implementation on firms’ financial/growth performance
Ahmad, A., Mehra, S., & Pletcher, M. (2004) · Journal of Manufacturing Technology Management · doi:10.1108/09576060410513715 · Cited by 101
Assessment of lean manufacturing effect on business performance using Bayesian Belief Networks
Büyüközkan, G., Kayakutlu, G., & Karakadılar, İ. S. (2015) · Expert Systems with Applications · doi:10.1016/j.eswa.2015.04.016 · Cited by 90
Bergenwall, A. L., Chen, C., & White, R. E. (2012) · International Journal of Production Economics · doi:10.1016/j.ijpe.2012.04.016 · Cited by 88
Profiling the resiliency and sustainability of UK manufacturing companies
Thomas, A. J., Byard, P., Francis, M., Fisher, R., & White, G. R. T. (2016) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-06-2014-0086 · Cited by 79
Celebrating the enigma: the continuing puzzle of the Toyota Production System
New, S. (2007) · International Journal of Production Research · doi:10.1080/00207540701223386 · Cited by 73
Avella, L., & Bustelo, D. V. (2010) · International Journal of Operations & Production Management · doi:10.1108/01443571011046021 · Cited by 61
Using lean methodologies for economically and environmentally sustainable foundries
Productivity, R. (2011) · DOAJ (DOAJ: Directory of Open Access Journals) · Cited by 56
Lean Manufacturing and Sustainability: An Integrated View
Resta, B., Dotti, S., Gaiardelli, P., & Boffelli, A. (2016) · IFIP advances in information and communication technology · doi:10.1007/978-3-319-51133-7_78 · Cited by 56
Bandehnezhad, M., Zailani, S. H. M., & Fernando, Y. (2012) · International Journal of Value Chain Management · doi:10.1504/ijvcm.2012.048379 · Cited by 43
Using lean methodologies for economically and environmentally sustainable foundries
Torielli, Abrahams, Smillie, & Voigt (2011) · Acta Scientiarum Naturalium Universitatis Sunyatseni · Cited by 34
How Lean Manufacturing Affects the Creation of Sustainable Value: An Integrated Model
Resta, B., Dotti, S., Gaiardelli, P., & Boffelli, A. (2017) · International Journal of Automation Technology · doi:10.20965/ijat.2017.p0542 · Cited by 32
Perry, C. M., Alvarez, J. G. C., & López, F. (2013) · Información tecnológica · doi:10.4067/s0718-07642013000400003 · Cited by 31
Lean Six Sigma Sustainability Framework: A Case Study on an Automotive Company
Kowang, T. O., Yong, T., Rasli, A. B. M., & Long, C. S. (2016) · Asian Journal of Scientific Research · doi:10.3923/ajsr.2016.279.283 · Cited by 29
Lankoski, L. (2008) · Scandinavian Journal of Management · doi:10.1016/j.scaman.2008.10.002 · Cited by 28
Ruben, R. B., Asokan, P., & Vinodh, S. (2017) · International Journal of Sustainable Engineering · doi:10.1080/19397038.2017.1286409 · Cited by 27
Sustainability — in light of competitiveness
Sonntag, V. (2000) · Ecological Economics · doi:10.1016/s0921-8009(00)00141-5 · Cited by 24
Developing a Framework for Sustainable Manufacturing Strategies Selection
Ocampo, L. A., & Clark, E. (2014) · DLSU Business & Economics Review · doi:10.59588/2243-786x.1307 · Cited by 24
THE EFFECTIVENESS OF LEAN MANUFACTURING AUDITS IN MEASURING OPERATIONAL PERFORMANCE IMPROVEMENTS
Taggart, P., & Kienh�fer, F. (2013) · The South African Journal of Industrial Engineering · doi:10.7166/24-2-749 · Cited by 21
LEAN PRODUCTION: ESTADO ACTUAL Y DESAFÍOS FUTUROS DE LA INVESTIGACIÓN
Alarcón, M., & Moyano‐Fuentes, J. (2007) · Investigaciones Europeas de Dirección y Economía de la Empresa · Cited by 16
Transfusion of Total Quality Management and Total Productive Maintenance: a literature review
Singh, K., & Ahuja, I. S. (2012) · International Journal of Technology Policy and Management · doi:10.1504/ijtpm.2012.050135 · Cited by 8
Decision Making for Sustainability: Review and Research Agenda
Despeisse, M., & Vladimirova, D. (2014) · Lecture notes in computer science · doi:10.1007/978-3-662-44736-9_18 · Cited by 7
Lean Manufacturing Issues and Challenges in Manufacturing Process- A Review
Soorapparaju, D., Gobinath, S., Elangovan, D., & Dharmalingam, S. (2015) · Cited by 5
Cited by
Belhadi, A., Kamble, S. S., Zkik, K., Cherrafi, A., & Touriki, F. E. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119903 · Cited by 329
Sustainable manufacturing. Bibliometrics and content analysis
Bhatt, Y., Ghuman, K., & Dhir, A. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120988 · Cited by 303
Enabling the Circular Economy transition: a sustainable lean manufacturing recipe for Industry 4.0
Ciliberto, C., Szopik‐Depczyńska, K., Tarczyńska‐Łuniewska, M., Ruggieri, A., & Ioppolo, G. (2021) · Business Strategy and the Environment · doi:10.1002/bse.2801 · Cited by 278
Abu, F., Gholami, H., Mat Saman, M. Z., Zakuan, N., & Streimikiene, D. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.06.279 · Cited by 197
Antony, J., Psomas, E., Garza-Reyes, J. A., & Hines, P. (2021) · Production Planning & Control · doi:10.1080/09537287.2020.1776410 · Cited by 116
“…Jayamaha, and Grigg 2017; Garza-Reyes et al. 2018a; Gulyaz et al. 2019; Hallam, Valerdi, and Contreras 2018; Hallavo, Kuula, and Putkiranta 2018; Henao, Sarache, and Gomez 2019; Hernandez-Matias et al. 2019; Hu et al. 2015; Iyer, Srivastava, and Srinivasan 2019; Jadhav, Mantha, and Rane 2014;…”
BackgroundInfluential
Metadata
- Authors
- Henao, R., Sarache, W., & Gómez, I.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 208
- Pages
- 99-116
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2897169734
- Cited by
- 314
- References
- 93
- FWCI
- 42.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.