The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
An overview of the problems posed by plastic products and the role of extended producer responsibility in Europe
Open accessAbstract
Abstract Plastic products are easy and convenient for our everyday use, but their negative impacts on human health and the environment cannot be overlooked. The negative impacts and effects of plastic waste are now widely known and have been subject of much recent media coverage, both in Europe and on a global level. Faced with increasing amounts of plastic waste, the European Union as a whole and many European governments in particular, are currently revising the policy options available to cope with the problem. One of the tools which may be deployed with a view to reducing the pressures posed by plastic waste, is the Extended Producer Responsibility principle. It is considered to be one of the major waste management policy instruments that support the implementation of the European waste hierarchy. Its application may assist in fostering the collection and recycling of waste streams that contain plastic. This paper presents an overview of the problems posed by plastic waste, and outlines their environmental dimensions. It discusses the role of the Extended Producer Responsibility principle and provides some recommendations that may be useful in enhancing extended producer responsibility.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Physical Impacts of Microplastics on Marine Organisms: A Review
Wright, S. L., Thompson, R. C., & Galloway, T. S. (2013) · Environmental Pollution · doi:10.1016/j.envpol.2013.02.031 · Cited by 4,524
A literature and practice review to develop sustainable business model archetypes
Bocken, N. M. P., Short, S. W., Rana, P., & Evans, S. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.11.039 · Cited by 4,366
Product design and business model strategies for a circular economy
Bocken, N. M. P., de Pauw, I., Bakker, C., & van der Grinten, B. (2016) · Journal of Industrial and Production Engineering · doi:10.1080/21681015.2016.1172124 · Cited by 4,002
Business models for sustainable innovation: state-of-the-art and steps towards a research agenda
Boons, F., & Lüdeke-Freund, F. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.07.007 · Cited by 2,469
The impact of debris on marine life
Gall, S. C., & Thompson, R. C. (2015) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2014.12.041 · Cited by 2,187 · cited 1×
“For instance it was investigated the high frequency of plastic fragments in the bluefin tuna (Gall & Thompson 2015; Romeo et. al., 2015).”
Plastics in soil: Analytical methods and possible sources
Bläsing, M., & Amelung, W. (2018) · Science of The Total Environment · doi:10.1016/j.scitotenv.2017.08.086 · Cited by 1,655
Conceptualizing a “Sustainability Business Model”
Stubbs, W., & Cocklin, C. (2008) · Organization & Environment · doi:10.1177/1086026608318042 · Cited by 1,461
Microplastics in Swiss Floodplain Soils
Scheurer, M., & Bigalke, M. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.7b06003 · Cited by 1,288
Xanthos, D., & Walker, T. R. (2017) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2017.02.048 · Cited by 1,229
Current research trends on plastic pollution and ecological impacts on the soil ecosystem: A review
Chae, Y., & An, Y.-J. (2018) · Environmental Pollution · doi:10.1016/j.envpol.2018.05.008 · Cited by 1,140
Plastics in the Marine Environment
Law, K. L. (2017) · Annual Review of Marine Science · doi:10.1146/annurev-marine-010816-060409 · Cited by 1,059
Fate of nano- and microplastic in freshwater systems: A modeling study
Besseling, E., Quik, J. T. K., Sun, M., & Koelmans, A. A. (2017) · Environmental Pollution · doi:10.1016/j.envpol.2016.10.001 · Cited by 919
Plastic waste associated with disease on coral reefs
Lamb, J. B., Willis, B. L., Fiorenza, E. A., Couch, C. S., Howard, R., Rader, D. N., True, J. D., Kelly, L. A., Ahmad, A., Jompa, J., et al. (2018) · Science · doi:10.1126/science.aar3320 · Cited by 857
Rodrigues, M. O., Abrantes, N., Gonçalves, F. J. M., Nogueira, H., Marques, J. C., & Gonçalves, A. M. M. (2018) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.03.233 · Cited by 840
Synthetic fibers as an indicator of land application of sludge
Zubris, K. A. V., & Richards, B. K. (2005) · Environmental Pollution · doi:10.1016/j.envpol.2005.04.013 · Cited by 723
Freshwater plastic pollution: Recognizing research biases and identifying knowledge gaps
Blettler, M. C. M., Abrial, E., Khan, F. R., Sivri, N., & Espinola, L. A. (2018) · Water Research · doi:10.1016/j.watres.2018.06.015 · Cited by 656
Romeo, T., Pietro, B., Pedà, C., Consoli, P., Andaloro, F., & Fossi, M. C. (2015) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2015.04.048 · Cited by 598
Jahnke, A., Arp, H. P. H., Escher, B. I., Gewert, B., Gorokhova, E., Kühnel, D., Ogonowski, M., Potthoff, A., Rummel, C., Schmitt-Jansen, M., et al. (2017) · Environmental Science & Technology Letters · doi:10.1021/acs.estlett.7b00008 · Cited by 580
A Framework for Sustainable Circular Business Model Innovation
Antikainen, M., & Valkokari, K. (2016) · Technology Innovation Management Review · doi:10.22215/timreview/1000 · Cited by 565
Value Proposition Design: How to Create Products and Services Customers Want
Pritchett, G. (2014) · Central European Business Review · doi:10.18267/j.cebr.104 · Cited by 508
Bio-based plastics - A review of environmental, social and economic impact assessments
Spierling, S., Knüpffer, E., Behnsen, H., Mudersbach, M., Krieg, H., Springer, S., Albrecht, S., Herrmann, C., & Endres, H.-J. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.014 · Cited by 502
Value Proposition Design: How to Create Products and Services Customers Want
Osterwalder, A. (2014) · Cited by 467
Gu, F., Guo, J., Zhang, W., Summers, P. A., & Hall, P. (2017) · Science of The Total Environment · doi:10.1016/j.scitotenv.2017.05.278 · Cited by 423
Recycling potential of post-consumer plastic packaging waste in Finland
Dahlbo, H., Poliakova, V., Mylläri, V., Sahimaa, O., & Anderson, R. (2018) · Waste Management · doi:10.1016/j.wasman.2017.10.033 · Cited by 364
Lindhqvist, T. (2000) · Lund University Publications (Lund University) · Cited by 300
Plastic recycling in the Nordics: A value chain market analysis
Milios, L., Holm Christensen, L., McKinnon, D., Christensen, C., Rasch, M. K., & Hallstrøm Eriksen, M. (2018) · Waste Management · doi:10.1016/j.wasman.2018.03.034 · Cited by 249
Liu, Z., Adams, M., & Walker, T. R. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.04.005 · Cited by 223
Third-party demanufacturing as a solution for extended producer responsibility
Spicer, A. J., & Johnson, M. R. (2004) · Journal of Cleaner Production · doi:10.1016/s0959-6526(02)00182-8 · Cited by 173
Marine debris surveys at Bird Island, South Georgia 1990–1995
Walker, T. R., Reid, K., Arnould, J. P. Y., & Croxall, J. P. (1997) · Marine Pollution Bulletin · doi:10.1016/s0025-326x(96)00053-7 · Cited by 166
Proceedings of the International Conference on Microplastic Pollution in the Mediterranean Sea
(2018) · Springer Water · doi:10.1007/978-3-319-71279-6 · Cited by 162
Plastics in the marine environment
Koelmans, A. A., Gouin, T., Thompson, R., Wallace, N., & Arthur, C. (2014) · Environmental Toxicology and Chemistry · doi:10.1002/etc.2426 · Cited by 160
Energy Efficiency and Sustainable Consumption: The Rebound Effect
(2009) · International Journal of Sustainability in Higher Education · doi:10.1108/ijshe.2009.24910cae.004 · Cited by 150
A call for Canada to move toward zero plastic waste by reducing and recycling single-use plastics
Walker, T. R., & Xanthos, D. (2018) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2018.02.014 · Cited by 150
Comprehensive analysis and quantification of national plastic flows: The case of Austria
Eygen, E. V., Feketitsch, J., Laner, D., Rechberger, H., & Fellner, J. (2016) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2016.10.017 · Cited by 141
Benchmarking approaches and methods in the field of urban waste management
Filho, W. L., Brandli, L., Moora, H., Kruopienė, J., & Stenmarck, Å. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.09.065 · Cited by 113
Self-citationSustainability and innovation in the Brazilian supply chain of green plastic
Mores, G. D. V., Finocchio, C. P. S., Barichello, R., & Pedrozo, E. Á. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.138 · Cited by 105
Electricity-based plastics and their potential demand for electricity and carbon dioxide
Palm, E., Nilsson, L. J., & Åhman, M. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.03.158 · Cited by 86
Extended producer responsibility: a differential fee model for promoting sustainable packaging
Pires, A., Martinho, G., Ribeiro, R. A., Mota, M., & Teixeira, L. F. S. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.07.084 · Cited by 75
Drowning in debris: Solutions for a global pervasive marine pollution problem
Walker, T. R. (2017) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2017.11.039 · Cited by 73
Urreaga, J. M., González, C., Martínez-Aguirre, A., Fonseca-Valero, C., Acosta, J., & de la Orden, M. U. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.06.001 · Cited by 57
Food Waste and Sustainable Food Waste Management in the Baltic Sea Region
Filho, W. L., & Kovaleva, M. (2014) · Environmental science and engineering · doi:10.1007/978-3-319-10906-0 · Cited by 40
ten Brink, P., Schweitzer, J.-P., Watkins, E. D., et al. (2018) · DOAJ (DOAJ: Directory of Open Access Journals) · Cited by 35
ten Brink, P., Schweitzer, J.-P., Watkins, E. D., et al. (2017) · Institutional Archive of Ifremer (French Research Institute for Exploitation of the Sea) · Cited by 25
Identifying Sustainable Business Models Through Sustainable Value Creation
Aagaard, A. (2018) · Palgrave studies in sustainable business in association with Future Earth · doi:10.1007/978-3-319-93275-0_1 · Cited by 20
Bocken, N. M. P. (2019) · Encyclopedia of the UN sustainable development goals · doi:10.1007/978-3-319-71058-7_48-1 · Cited by 9
Cited by
Kumar, R., Verma, A., Shome, A., Sinha, R., Sinha, S., Jha, P. K., Kumar, R., Kumar, P., Shubham, Das, S., et al. (2021) · Sustainability · doi:10.3390/su13179963 · Cited by 1,111
Achieving net-zero greenhouse gas emission plastics by a circular carbon economy
Meys, R., Kätelhön, A., Bachmann, M., Winter, B., Zibunas, C., Suh, S., & Bardow, A. (2021) · Science · doi:10.1126/science.abg9853 · Cited by 577
An inshore–offshore sorting system revealed from global classification of ocean litter
Morales-Caselles, C., Viejo, J., Martí, E., González-Fernández, D., Pragnell-Raasch, H., González-Gordillo, J. I., Montero, E., Arroyo, G. M., Hanke, G., Salvo, V. S., et al. (2021) · Nature Sustainability · doi:10.1038/s41893-021-00720-8 · Cited by 457
Digital transformation, sustainability, and purpose in the multinational enterprise
George, G., & Schillebeeckx, S. J. D. (2022) · Journal of World Business · doi:10.1016/j.jwb.2022.101326 · Cited by 388
Repurposing waste plastics into cleaner asphalt pavement materials: A critical literature review
Wu, S., & Montalvo, L. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124355 · Cited by 310
Metadata
- Authors
- Leal Filho, W., Saari, U., Fedoruk, M., Iital, A., Moora, H., Klöga, M., & Voronova, V.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 214
- Pages
- 550-558
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2907052495
- Cited by
- 404
- References
- 45
- FWCI
- 31.58
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.