The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Why manufacturers adopt additive manufacturing technologies: The role of sustainability
Open accessAbstract
Abstract Emerging manufacturing technologies can affect the performance of manufacturing systems considerably. Hence, a proportionate and purposive choice of such technologies would significantly impact the success of a firm. Additive Manufacturing, a leading and impactful technology, is being implemented in many industrial sectors and for a variety of reasons. It presents huge potential benefits in terms of sustainability perspectives. This paper aims to identify and prioritize the determinants of its adoption as well as to clarify the role of sustainability benefits in the decision to adopt. Then, the research seeks to distinguish the priorities of different application sectors through a multi-stage survey. The results show that environmental sustainability benefits are barely relevant to adoption decisions in practice and this is in contrast with the literature stating the huge sustainability benefits. Moreover, the results prove the pivotal role of economic motives in adoption decisions. The findings also indicate that the capability of additive manufacturing for producing almost any complex design is the key driver of its adoption in all sectors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Delphi method as a research tool: an example, design considerations and applications
Okoli, C., & Pawlowski, S. D. (2004) · Information & Management · doi:10.1016/j.im.2003.11.002 · Cited by 4,771
Best-worst multi-criteria decision-making method
Rezaei, J. (2015) · Omega · doi:10.1016/j.omega.2014.11.009 · Cited by 4,333
3-D printing: The new industrial revolution
Berman, B. (2012) · Business Horizons · doi:10.1016/j.bushor.2011.11.003 · Cited by 2,481
Additive manufacturing and sustainability: an exploratory study of the advantages and challenges
Ford, S., & Despeisse, M. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.04.150 · Cited by 1,889
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing
Attaran, M. (2017) · Business Horizons · doi:10.1016/j.bushor.2017.05.011 · Cited by 1,822
Best-worst multi-criteria decision-making method: Some properties and a linear model
Rezaei, J. (2016) · Omega · doi:10.1016/j.omega.2015.12.001 · Cited by 1,720
A Group Process Model for Problem Identification and Program Planning
Delbecq, A. L., & Van de Ven, A. H. (1971) · The Journal of Applied Behavioral Science · doi:10.1177/002188637100700404 · Cited by 1,145
Principles of Forecasting: A Handbook for Researchers and Practitioners
(2001) · International Series in Operations Research & Management Science · doi:10.1007/978-0-306-47630-3 · Cited by 1,041
A global sustainability perspective on 3D printing technologies
Gebler, M., Schoot Uiterkamp, A. J. M., & Visser, C. (2014) · Energy Policy · doi:10.1016/j.enpol.2014.08.033 · Cited by 950
Elkington, J. (2013) · Routledge eBooks · doi:10.4324/9781849773348-1 · Cited by 948
Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations
Huang, Y., Leu, M. C., Mazumder, J., & Donmez, A. (2015) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028725 · Cited by 947
Envisioning sustainability three-dimensionally
Lozano, R. (2008) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2008.02.008 · Cited by 837
Laser sintering of polyamides and other polymers
Goodridge, R. D., Tuck, C. J., & Hague, R. J. M. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.04.001 · Cited by 835
Huang, R., Riddle, M., Graziano, D., Warren, J., Das, S., Nimbalkar, S., Cresko, J., & Masanet, E. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.04.109 · Cited by 805
Weller, C., Kleer, R., & Piller, F. T. (2015) · International Journal of Production Economics · doi:10.1016/j.ijpe.2015.02.020 · Cited by 783
Expert Opinions in Forecasting: The Role of the Delphi Technique
Rowe, G., & Wright, G. (2001) · International Series in Operations Research & Management Science · doi:10.1007/978-0-306-47630-3_7 · Cited by 777
The cost of additive manufacturing: machine productivity, economies of scale and technology-push
Baumers, M., Dickens, P., Tuck, C., & Hague, R. (2016) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2015.02.015 · Cited by 658
Curtis, S., Gesler, W., Smith, G., & Washburn, S. (2000) · Social Science & Medicine · doi:10.1016/s0277-9536(99)00350-0 · Cited by 591
Direct digital manufacturing: definition, evolution, and sustainability implications
Chen, D., Heyer, S., Ibbotson, S., Salonitis, K., Steingrímsson, J. G., & Thiede, S. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.05.009 · Cited by 498
Jiang, R., Kleer, R., & Piller, F. T. (2017) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2017.01.006 · Cited by 480
Tracey, M., Vonderembse, M. A., & Lim, J. (1999) · Journal of Operations Management · doi:10.1016/s0272-6963(98)00045-x · Cited by 461
Bogers, M., Hadar, R., & Bilberg, A. (2016) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2015.07.024 · Cited by 457
Faludi, J., Bayley, C., Bhogal, S., & Iribarne, M. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-07-2013-0067 · Cited by 431
Additive manufacturing-enabled design theory and methodology: a critical review
Yang, S., & Zhao, Y. F. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-6994-5 · Cited by 371
3D printing: the dawn of a new era in manufacturing?
Bogue, R. (2013) · Assembly Automation · doi:10.1108/aa-06-2013-055 · Cited by 371
Costs, benefits, and adoption of additive manufacturing: a supply chain perspective
Thomas, D. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7973-6 · Cited by 342
Yoon, H.-S., Lee, J.-Y., Kim, H.-S., Kim, M.-S., Kim, E.-S., Shin, Y.-J., Chu, W.-S., & Ahn, S.-H. (2014) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-014-0033-0 · Cited by 324
Disruptions, decisions, and destinations: Enter the age of 3-D printing and additive manufacturing
Kietzmann, J., Pitt, L., & Berthon, P. (2015) · Business Horizons · doi:10.1016/j.bushor.2014.11.005 · Cited by 307
Adoption of 3D-printing technologies in manufacturing: A survey analysis
Schniederjans, D. G. (2017) · International Journal of Production Economics · doi:10.1016/j.ijpe.2016.11.008 · Cited by 249
Tang, Y., Mak, K., & Zhao, Y. F. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.06.037 · Cited by 237
The barriers to the progression of additive manufacture: Perspectives from UK industry
Thomas-Seale, L. E. J., Kirkman-Brown, J. C., Attallah, M. M., Espino, D. M., & Shepherd, D. E. T. (2018) · International Journal of Production Economics · doi:10.1016/j.ijpe.2018.02.003 · Cited by 235
The impact of additive manufacturing on supply chains
Durach, C. F., Kurpjuweit, S., & Wagner, S. M. (2017) · International Journal of Physical Distribution & Logistics Management · doi:10.1108/ijpdlm-11-2016-0332 · Cited by 221
Additive manufacturing management: a review and future research agenda
Khorram Niaki, M., & Nonino, F. (2017) · International Journal of Production Research · doi:10.1080/00207543.2016.1229064 · Cited by 208
Self-citation3D printing services: classification, supply chain implications and research agenda
Rogers, H., Baricz, N., & Pawar, K. S. (2016) · International Journal of Physical Distribution & Logistics Management · doi:10.1108/ijpdlm-07-2016-0210 · Cited by 208
Mapping the Landscape of Future Research Themes in Supply Chain Management
Wieland, A., Handfield, R. B., & Durach, C. F. (2016) · Journal of Business Logistics · doi:10.1111/jbl.12131 · Cited by 192
Bekker, A. C. M., & Verlinden, J. C. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.148 · Cited by 190
Transparency Built‐in: Energy Consumption and Cost Estimation for Additive Manufacturing
Baumers, M., Tuck, C., Wildman, R., Ashcroft, I., Rosamond, E., & Hague, R. (2013) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2012.00512.x · Cited by 177
Critical success factors for adoption of 3D printing
Yeh, C.-C., & Chen, Y.-F. (2018) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2018.02.003 · Cited by 177
Impact of additive manufacturing on business competitiveness: a multiple case study
Niaki, M. K., & Nonino, F. (2017) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-01-2016-0001 · Cited by 168
Self-citationAnalysis of barriers to implement additive manufacturing technology in the Indian automotive sector
Dwivedi, G., Srivastava, S. K., & Srivastava, R. K. (2017) · International Journal of Physical Distribution & Logistics Management · doi:10.1108/ijpdlm-07-2017-0222 · Cited by 167
Oettmeier, K., & Hofmann, E. (2016) · Journal of Business Economics · doi:10.1007/s11573-016-0806-8 · Cited by 165
Ruffo, M., & Hague, R. (2007) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/09544054jem894 · Cited by 152
The Role of Additive Manufacturing in Improving Resource Efficiency and Sustainability
Despeisse, M., & Ford, S. J. (2015) · IFIP advances in information and communication technology · doi:10.1007/978-3-319-22759-7_15 · Cited by 143
An exploratory investigation of Additively Manufactured Product life cycle sustainability assessment
Ma, J., Harstvedt, J. D., Dunaway, D., Bian, L., & Jaradat, R. M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.04.249 · Cited by 131
Holmström, J., Liotta, G., & Chaudhuri, A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.03.092 · Cited by 128
Priarone, P. C., & Ingarao, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.165 · Cited by 127
Niaki, M. K., Nonino, F., Palombi, G., & Torabi, S. A. (2018) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-05-2018-0131 · Cited by 111
Self-citationYang, Y., Li, L., Pan, Y., & Sun, Z. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12589 · Cited by 92
Yang, Y., & Li, L. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.09.193 · Cited by 61
Cited by
Industry 4.0, digitization, and opportunities for sustainability
Ghobakhloo, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119869 · Cited by 2,115
Wickramasinghe, S., Do, T., & Tran, P. (2020) · Polymers · doi:10.3390/polym12071529 · Cited by 1,052
Directed Energy Deposition (DED) Process: State of the Art
Ahn, D.-G. (2021) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-020-00302-7 · Cited by 803
Making sustainable aluminum by recycling scrap: The science of “dirty” alloys
Raabe, D., Ponge, D., Uggowitzer, P. J., Roscher, M., Paolantonio, M., Liu, C., Antrekowitsch, H., Kozeschnik, E., Seidmann, D., Gault, B., et al. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100947 · Cited by 626
Role of additive manufacturing applications towards environmental sustainability
Javaid, M., Haleem, A., Singh, R. P., Suman, R., & Rab, S. (2021) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2021.07.005 · Cited by 419
Metadata
- Authors
- Niaki, M. K., Torabi, S. A., & Nonino, F.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-06
- Volume
- 222
- Pages
- 381-392
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2922051008
- Cited by
- 298
- References
- 50
- FWCI
- 16.83
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.