The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Disassembly and deconstruction analytics system (D-DAS) for construction in a circular economy
Open accessAbstract
Despite the relevance of building information modelling for simulating building performance at various life cycle stages, Its use for assessing the end-of-life impacts is not a common practice. Even though the global sustainability and circular economy agendas require that buildings must have minimal impact on the environment across the entire lifecycle. In this study therefore, a disassembly and deconstruction analytics system is developed to provide buildings’ end-of-life performance assessment from the design stage. The system architecture builds on the existing building information modelling capabilities in managing building design and construction process. The architecture is made up of four different layers namely (i) Data storage layer, (ii) Semantic layer, (iii) Analytics and functional models layer and (iv) Application layer. The four layers are logically connected to function as a single system. Three key functionalities of the disassembly and deconstruction analytics system namely (i) Building Whole Life Performance Analytics (ii) Building Element Deconstruction Analytics and (iii) Design for Deconstruction Advisor are implemented as plug-in in Revit 2017. Three scenarios of a case study building design were used to test and evaluate the performance of the system. The results show that building information modelling software capabilities can be extended to provide a platform for assessing the performance of building designs in respect of the circular economy principle of keeping the embodied energy of materials perpetually in an economy. The disassembly and deconstruction analytics system would ensure that buildings are designed with design for disassembly and deconstruction principles that guarantee efficient materials recovery in mind. The disassembly and deconstruction analytics tool could also serve as a decision support platform that government and planners can use to evaluate the level of compliance of building designs to circular economy and sustainability requirements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Circular Economy–A new sustainability paradigm?
Geissdoerfer, M., Savaget, P., Bocken, N. M. P., & Hultink, E. J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.048 · Cited by 9,360
Towards circular economy implementation: A comprehensive review in context of manufacturing industry
Lieder, M., & Rashid, A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.042 · Cited by 2,762
Stahel, W. R. (2016) · Nature · doi:10.1038/531435a · Cited by 2,555
Building Information Modeling (BIM) for existing buildings — Literature review and future needs
Volk, R., Stengel, J., & Schultmann, F. (2014) · Automation in Construction · doi:10.1016/j.autcon.2013.10.023 · Cited by 2,199
Product services for a resource-efficient and circular economy – a review
Tukker, A. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.11.049 · Cited by 1,961
Govindan, K., & Hasanagic, M. (2018) · International Journal of Production Research · doi:10.1080/00207543.2017.1402141 · Cited by 1,522
A review of the circular economy in China: moving from rhetoric to implementation
Su, B., Heshmati, A., Geng, Y., & Yu, X. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.11.020 · Cited by 1,429
Introduction to Software Architecture
(2009) · Advanced Topics in Science and Technology in China · doi:10.1007/978-3-540-74343-9_1 · Cited by 1,099
AN INTRODUCTION TO SOFTWARE ARCHITECTURE
GARLAN, D., & SHAW, M. (1993) · Series on Software Engineering and Knowledge Engineering · doi:10.1142/9789812798039_0001 · Cited by 621
Han, J., Haihong, E., Le, G., & Du, J. (2011) · 2011 6th International Conference on Pervasive Computing and Applications · doi:10.1109/icpca.2011.6106531 · Cited by 617
Pan, S.-Y., Du, M. A., Huang, I.-T., Liu, I.-H., Chang, E.-E., & Chiang, P.-C. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.06.124 · Cited by 609
Building information modeling for sustainable design and LEED® rating analysis
Azhar, S., Carlton, W. A., Olsen, D., & Ahmad, I. (2011) · Automation in Construction · doi:10.1016/j.autcon.2010.09.019 · Cited by 607
Will NoSQL Databases Live Up to Their Promise?
Leavitt, N. (2010) · Computer · doi:10.1109/mc.2010.58 · Cited by 504
Comparing linear and circular supply chains: A case study from the construction industry
Nasir, M. H. A., Genovese, A., Acquaye, A. A., Koh, S. C. L., & Yamoah, F. (2017) · International Journal of Production Economics · doi:10.1016/j.ijpe.2016.06.008 · Cited by 503
Smol, M., Kulczycka, J., Henclik, A., Gorazda, K., & Wzorek, Z. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.02.051 · Cited by 487
Salvaging building materials in a circular economy: a BIM-based whole-life performance estimator
Akanbi, L. A., Oyedele, L. O., Akinade, O. O., Ajayi, A. O., Davila Delgado, M., Bilal, M., & Bello, S. A. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.10.026 · Cited by 468
Self-citationReliability analysis using an additive Weibull model with bathtub-shaped failure rate function
Xie, M., & Lai, C. D. (1996) · Reliability Engineering & System Safety · doi:10.1016/0951-8320(95)00149-2 · Cited by 466
A BIM-based system for demolition and renovation waste estimation and planning
Cheng, J. C. P., & Ma, L. Y. H. (2013) · Waste Management · doi:10.1016/j.wasman.2013.01.001 · Cited by 402
A Global Redesign? Shaping the Circular Economy
Preston, F. (2012) · Cited by 390
A mixed review of the adoption of Building Information Modelling (BIM) for sustainability
Chong, H.-Y., Lee, C.-Y., & Wang, X. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.09.222 · Cited by 371
Properties of concrete paving blocks made with waste marble
Gencel, O., Ozel, C., Koksal, F., Erdogmus, E., Martínez-Barrera, G., & Brostow, W. (2012) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.08.023 · Cited by 326
Akinade, O. O., Oyedele, L. O., Ajayi, S. O., Bilal, M., Alaka, H. A., Owolabi, H. A., Bello, S. A., Jaiyeoba, B. E., & Kadiri, K. O. (2017) · Waste Management · doi:10.1016/j.wasman.2016.08.017 · Cited by 310
Self-citationLife cycle design and prefabrication in buildings: A review and case studies in Hong Kong
Jaillon, L., & Poon, C. S. (2014) · Automation in Construction · doi:10.1016/j.autcon.2013.09.006 · Cited by 305
Building waste assessment score: design-based tool
Ekanayake, L. L., & Ofori, G. (2004) · Building and Environment · doi:10.1016/j.buildenv.2004.01.007 · Cited by 289
Ajayi, S. O., Oyedele, L. O., Bilal, M., Akinade, O. O., Alaka, H. A., Owolabi, H. A., & Kadiri, K. O. (2015) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2015.06.001 · Cited by 282
Self-citationBIM adoption and implementation for architectural practices
Arayıcı, Y., Coates, P., Koskela, L., Kagioglou, M., Usher, C., & O'Reilly, K. (2011) · International Journal of Building Pathology and Adaptation · doi:10.1108/02630801111118377 · Cited by 279
Waste minimisation through deconstruction: A BIM based Deconstructability Assessment Score (BIM-DAS)
Akinade, O. O., Oyedele, L. O., Bilal, M., Ajayi, S. O., Owolabi, H. A., Alaka, H. A., & Bello, S. A. (2015) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2015.10.018 · Cited by 272
Self-citationOn the effectiveness in implementing a waste-management-plan method in construction
Tam, V. W. Y. (2008) · Waste Management · doi:10.1016/j.wasman.2007.04.007 · Cited by 263
A new modified Weibull distribution
Almalki, S. J., & Yuan, J. (2013) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2012.10.018 · Cited by 262
Design for disassembly and deconstruction - challenges and opportunities
Rios, F. C., Chong, W. K., & Grau, D. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.08.485 · Cited by 235
Green building assessment tool (GBAT) for integrated BIM-based design decisions
İlhan, B., & Yaman, H. (2016) · Automation in Construction · doi:10.1016/j.autcon.2016.05.001 · Cited by 227
Won, J., & Cheng, J. C. P. (2017) · Automation in Construction · doi:10.1016/j.autcon.2017.02.002 · Cited by 221
Wang, J., Li, Z., & Tam, V. W. Y. (2014) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2013.11.003 · Cited by 218
BIM Execution Planning in Green Building Projects: LEED as a Use Case
Wu, W., & Issa, R. R. A. (2015) · Journal of Management in Engineering · doi:10.1061/(asce)me.1943-5479.0000314 · Cited by 172
van Loon, P., & Wassenhove, L. N. V. (2017) · International Journal of Production Research · doi:10.1080/00207543.2017.1367107 · Cited by 168
Developing an LCA methodology to account for the environmental benefits of design for deconstruction
Densley Tingley, D., & Davison, B. (2012) · Building and Environment · doi:10.1016/j.buildenv.2012.06.005 · Cited by 164
Ahmad, T., & Thaheem, M. J. (2016) · Sustainable Cities and Society · doi:10.1016/j.scs.2016.08.002 · Cited by 153
Oyedele, L. O., Ajayi, S. O., & Kadiri, K. O. (2014) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2014.09.011 · Cited by 152
Self-citationProcess engineering in circular economy
Reh, L. (2013) · Particuology · doi:10.1016/j.partic.2012.11.001 · Cited by 148
Design for deconstruction and material reuse
Tingley, D. D., & Davison, B. (2011) · Proceedings of the Institution of Civil Engineers - Energy · doi:10.1680/ener.2011.164.4.195 · Cited by 142
BIM-based deconstruction tool: Towards essential functionalities
Akinadé, O. O., Oyedele, L. O., Omoteso, K., Ajayi, S. O., Bilal, M., Owolabi, H. A., Alaka, H., Ayris, L., & Looney, J. H. (2017) · International Journal of Sustainable Built Environment · doi:10.1016/j.ijsbe.2017.01.002 · Cited by 117
Self-citationAttributes of design for construction waste minimization: A case study of waste-to-energy project
Ajayi, S. O., Oyedele, L. O., Akinadé, O. O., Bilal, M., Alaka, H., Owolabi, H. A., & Kadiri, K. O. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.084 · Cited by 116
Self-citationUsing MongoDB to implement textbook management system instead of MySQL
Zhu, W., Ming-xin, L., & Huan, C. (2011) · IEEE International Conference on Communication Software and Networks · doi:10.1109/iccsn.2011.6013720 · Cited by 106
Architectural Mismatch: Why Reuse Is Still So Hard
Garlan, D., Allen, R., & Ockerbloom, J. M. (2009) · IEEE Software · doi:10.1109/ms.2009.86 · Cited by 96
The potential use of BIM to aid construction waste minimalisation
Liu, Z., Osmani, M., Demian, P., & Baldwin, A. (2011) · Loughborough University Institutional Repository (Loughborough University) · Cited by 90
A Review of Construction and Demolition Debris Regulations in the United States
Clark, C., Jambeck, J., & Townsend, T. (2006) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643380500531197 · Cited by 82
BIM-enabled sustainability assessment of material supply decisions
Fini, A. A. F., Rashidi, T. H., Akbarnezhad, A., & Waller, S. T. (2017) · Engineering Construction & Architectural Management · doi:10.1108/ecam-12-2015-0193 · Cited by 82
Building Deconstruction and Material Recovery in Iran: An Analysis of Major Determinants
Saghafi, M. D., & Teshnizi, Z. (2011) · Procedia Engineering · doi:10.1016/j.proeng.2011.11.2087 · Cited by 60
Webster, M. D., Gumpertz, S., & Costello, D. T. (2005) · Cited by 56
Design for Disassembly With High-Stiffness Heat-Reversible Locator-Snap Systems
Shalaby, M., & Saitou, K. (2008) · Journal of Mechanical Design · doi:10.1115/1.2991134 · Cited by 50
Cited by
Circular economy in the construction industry: A systematic literature review
Benachio, G. L. F., Freitas, M. D. C. D., & Tavares, S. F. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121046 · Cited by 941
Kristoffersen, E., Blomsma, F., Mikalef, P., & Li, J. (2020) · Journal of Business Research · doi:10.1016/j.jbusres.2020.07.044 · Cited by 841
Hossain, M. U., Ng, S. T., Antwi-Afari, P., & Amor, B. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109948 · Cited by 614
A systematic literature review on the circular economy initiatives in the European Union
Mhatre, P., Panchal, R., Singh, A., & Bibyan, S. (2021) · Sustainable Production and Consumption · doi:10.1016/j.spc.2020.09.008 · Cited by 448
Circular Digital Built Environment: An Emerging Framework
Çetin, S., De Wolf, C., & Bocken, N. (2021) · Sustainability · doi:10.3390/su13116348 · Cited by 367
Metadata
- Authors
- Akanbi, L. A., Oyedele, L. O., Omoteso, K., Bilal, M., Akinade, O. O., Ajayi, A. O., Davila Delgado, J. M., & Owolabi, H. A.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-06
- Volume
- 223
- Pages
- 386-396
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2921753295
- Cited by
- 270
- References
- 50
- FWCI
- 14.46
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.