CoChat

Material flow analysis (MFA) as a strategic tool in E-waste management: Applications, trends and future directions

Islam, Md Tasbirul, Huda, Nazmul · 2019 · Journal of Environmental Management
Cited by 200

The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.

Abstract

Material flow analysis (MFA) is one of the most widely accepted and utilized tools in the industrial-ecology discipline, that measures the input-output materials and examines the pathways and flux of each material flow within the whole system. The application of MFA in e-waste management has recently increased and quite a few academic articles have been published on this issue providing decision support at the policy level. However, there is a need to understand the dynamics of MFA methodology, the data requirements (as well as the data sources used in the previous studies) and the lessons learnt from the studies, so that countries where such an E-waste-MFA study has not yet been performed can apply the international experience of such an emerging research technique. This comprehensive review article presents the recent applications, trends, characteristics, research gaps and challenges of the MFA method that may help e-waste management with an overview of the need for a such tool to be applied. A country-wise analysis is presented and MFA models complemented by various associated methods are summarized with national-level, regional-level, product-level, and element-level assessment. The highlighted future research perspectives discussed in this study will help to analyze e-waste management systems more critically, including the hidden and known flows of waste products and associated materials, economic assessment of material recovery and the role of responsible authorities. This invaluable contribution will help future researchers, particularly from the data collection techniques and previously applied MFA models complemented by various associated methods.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.jenvman.2019.05.062

Cites

7 of 7 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 7 references

Research works printed but not linked: 59

  1. Agamuthu, 2015, E-waste flow among selected institutions of higher learning using material flow analysis model, Resour. Conserv. Recycl., 105, 177, 10.1016/j.resconrec.2015.09.018 · doi:10.1016/j.resconrec.2015.09.018
  2. Agrawal, 2015, A literature review and perspectives in reverse logistics, Resour. Conserv. Recycl., 97, 76, 10.1016/j.resconrec.2015.02.009 · DOI · Paper page
  3. Aizawa, 2008, Current results and future perspectives for Japanese recycling of home electrical appliances, Resour. Conserv. Recycl., 52, 1399, 10.1016/j.resconrec.2008.07.013 · DOI
  4. Alavi, 2015, Waste electrical and electronic equipment (WEEE) estimation: a case study of Ahvaz City, Iran, J. Air Waste Manag. Assoc., 65, 298, 10.1080/10962247.2014.976297 · DOI
  5. Andarani, 2014, Potential e-waste generated from households in Indonesia using material flow analysis, J. Mater. Cycles Waste Manag., 16, 306, 10.1007/s10163-013-0191-0 · DOI
  6. Araújo, 2012, A model for estimation of potential generation of waste electrical and electronic equipment in Brazil, Waste Manag., 32, 335, 10.1016/j.wasman.2011.09.020 · DOI · Paper page
  7. Bahers, 2018, Regional approach of waste electrical and electronic equipment (WEEE) management in France, Resour. Conserv. Recycl., 129, 45, 10.1016/j.resconrec.2017.10.016 · DOI
  8. Binder, 2008, Smart labels for waste and resource management, J. Ind. Ecol., 12, 207, 10.1111/j.1530-9290.2008.00016.x · DOI
  9. Breivik, 2014, Tracking the global generation and exports of e-waste. Do existing estimates add up?, Environ. Sci. Technol., 48, 8735, 10.1021/es5021313 · DOI · Paper page
  10. Chancerel, 2009, Assessment of precious metal flows during preprocessing of waste electrical and electronic equipment, J. Ind. Ecol., 13, 791, 10.1111/j.1530-9290.2009.00171.x · DOI · Paper page
  11. Duygan, 2015, Strategic management of WEEE in Switzerland—combining material flow analysis with structural analysis, Resour. Conserv. Recycl., 103, 98, 10.1016/j.resconrec.2015.06.005 · DOI
  12. Espinoza, 2014, Material flow analysis of carbon nanotube lithium-ion batteries used in portable computers, ACS Sustain. Chem. Eng., 2, 1642, 10.1021/sc500111y · DOI
  13. Ford, 2016, Economics of end-of-life materials recovery: a study of small appliances and computer devices in Portugal, Environ. Sci. Technol., 50, 4854, 10.1021/acs.est.6b00237 · DOI
  14. Golev, 2016, Where next on e-waste in Australia?, Waste Manag., 58, 348, 10.1016/j.wasman.2016.09.025 · DOI
  15. Govindan, 2015, Reverse logistics and closed-loop supply chain: a comprehensive review to explore the future, Eur. J. Oper. Res., 240, 603, 10.1016/j.ejor.2014.07.012 · DOI · Paper page
  16. Gu, 2017, To realize better extended producer responsibility: Redesign of WEEE fund mode in China, J. Clean. Prod., 164, 347, 10.1016/j.jclepro.2017.06.168 · DOI
  17. Guo, 2017, Estimation of obsolete cellular phones generation: a case study of China, Sci. Total Environ., 575, 321, 10.1016/j.scitotenv.2016.10.054 · DOI
  18. Gurauskienė, 2011, Application of material flow analysis to estimate the efficiency of e-waste management systems: the case of Lithuania, Waste Manag. Res., 29, 763, 10.1177/0734242X11406171 · DOI
  19. Gusukuma, 2018, Electronic waste after a digital TV transition: material flows and stocks, Resour. Conserv. Recycl., 138, 142, 10.1016/j.resconrec.2018.07.014 · DOI
  20. Habib, 2014, Material flow analysis of NdFeB magnets for Denmark: a comprehensive waste flow sampling and analysis approach, Environ. Sci. Technol., 48, 12229, 10.1021/es501975y · DOI
  21. Habuer, 2014, Time-series product and substance flow analyses of end-of-life electrical and electronic equipment in China, Waste Manag., 34, 489, 10.1016/j.wasman.2013.11.004 · DOI
  22. Islam, 2018, Comparison of E-waste management in Switzerland and in Australia: a qualitative content analysis, International Journal of Environmental and Ecological Engineering, 12
  23. Islam, 2018, Reverse logistics and closed-loop supply chain of Waste Electrical and Electronic Equipment (WEEE)/E-waste: a comprehensive literature review, Resour. Conserv. Recycl., 137, 48, 10.1016/j.resconrec.2018.05.026 · DOI · Paper page
  24. Kalmykova, 2015, Out with the old, out with the new–The effect of transitions in TVs and monitors technology on consumption and WEEE generation in Sweden 1996–2014, Waste Manag., 46, 511, 10.1016/j.wasman.2015.08.034 · DOI
  25. Khetriwal, 2009, Producer responsibility for e-waste management: key issues for consideration–learning from the Swiss experience, J. Environ. Manag., 90, 153, 10.1016/j.jenvman.2007.08.019 · DOI · Paper page
  26. Kiddee, 2013, Electronic waste management approaches: an overview, Waste Manag., 33, 1237, 10.1016/j.wasman.2013.01.006 · DOI · Paper page
  27. Lam, 2013, Linking material flow analysis with environmental impact potential, J. Ind. Ecol., 17, 299, 10.1111/j.1530-9290.2012.00513.x · DOI
  28. Lee, 2010, Characterization of monitor recycling in Seattle, Washington, Reg. Environ. Change, 10, 349, 10.1007/s10113-009-0106-8 · doi:10.1007/s10113-009-0106-8
  29. Leigh, 2007, Modeling obsolete computer stock under regional data constraints: an Atlanta case study, Resour. Conserv. Recycl., 51, 847, 10.1016/j.resconrec.2007.01.007 · DOI
  30. Liu, 2006, Generation amount prediction and material flow analysis of electronic waste: a case study in Beijing, China, Waste Manag. Res., 24, 434, 10.1177/0734242X06067449 · DOI
  31. Long, 2013, Flow analysis of heavy metals in a pilot-scale incinerator for residues from waste electrical and electronic equipment dismantling, J. Hazard Mater., 261, 427, 10.1016/j.jhazmat.2013.07.070 · doi:10.1016/j.jhazmat.2013.07.070
  32. Morris, 2016, Assessing effectiveness of WEEE management policy in Australia, J. Environ. Manag., 181, 218, 10.1016/j.jenvman.2016.06.013 · DOI
  33. Navazo, 2014, Material flow analysis and energy requirements of mobile phone material recovery processes, Int. J. Life Cycle Assess., 19, 567, 10.1007/s11367-013-0653-6 · DOI
  34. Oguchi, 2008, Product flow analysis of various consumer durables in Japan, Resour. Conserv. Recycl., 52, 463, 10.1016/j.resconrec.2007.06.001 · DOI
  35. Parajuly, 2016, End-of-life resource recovery from emerging electronic products–A case study of robotic vacuum cleaners, J. Clean. Prod., 137, 652, 10.1016/j.jclepro.2016.07.142 · DOI
  36. Parajuly, 2017, Waste electrical and electronic equipment (WEEE) in Denmark: flows, quantities and management, Resour. Conserv. Recycl., 123, 85, 10.1016/j.resconrec.2016.08.004 · DOI · Paper page
  37. Sommer, 2015, Battery related cobalt and REE flows in WEEE treatment, Waste Manag., 45, 298, 10.1016/j.wasman.2015.05.009 · doi:10.1016/j.wasman.2015.05.009
  38. Song, 2012, Residents' behaviors, attitudes, and willingness to pay for recycling e-waste in Macau, J. Environ. Manag., 106, 8, 10.1016/j.jenvman.2012.03.036 · DOI · Paper page
  39. Song, 2017, Estimation of waste battery generation and analysis of the waste battery recycling system in China, J. Ind. Ecol., 21, 57, 10.1111/jiec.12407 · DOI
  40. Steubing, 2010, Assessing computer waste generation in Chile using material flow analysis, Waste Manag., 30, 473, 10.1016/j.wasman.2009.09.007 · DOI
  41. Streicher-Porte, 2007, Material flow and economic analysis as a suitable tool for system analysis under the constraints of poor data availability and quality in emerging economies, Clean Technol. Environ. Policy, 9, 325, 10.1007/s10098-007-0114-7 · DOI
  42. Streicher-Porte, 2005, Key drivers of the e-waste recycling system: assessing and modelling e-waste processing in the informal sector in Delhi, Environ. Impact Assess. Rev., 25, 472, 10.1016/j.eiar.2005.04.004 · DOI · Paper page
  43. Tansel, 2017, From electronic consumer products to e-wastes: global outlook, waste quantities, recycling challenges, Environ. Int., 98, 35, 10.1016/j.envint.2016.10.002 · DOI · Paper page
  44. Thiébaud, 2018, Where do our resources Go? Indium, neodymium, and gold flows connected to the use of electronic equipment in Switzerland, Sustainability, 10, 2658, 10.3390/su10082658 · DOI
  45. Thiébaud, 2017, Use, storage, and disposal of electronic equipment in Switzerland, Environ. Sci. Technol., 51, 4494, 10.1021/acs.est.6b06336 · DOI · Paper page
  46. Tian, 2018, Deriving hazardous material flow networks: a case study of lead in China, J. Clean. Prod., 199, 391, 10.1016/j.jclepro.2018.07.132 · DOI
  47. Tran, 2018, Material flow analysis for management of waste TVs from households in urban areas of Vietnam, Resour. Conserv. Recycl., 139, 78, 10.1016/j.resconrec.2018.07.031 · DOI
  48. Ueberschaar, 2017, Assessment of element-specific recycling efficiency in WEEE pre-processing, Resour. Conserv. Recycl., 124, 25, 10.1016/j.resconrec.2017.04.006 · doi:10.1016/j.resconrec.2017.04.006
  49. Ueberschaar, 2017, Challenges for critical raw material recovery from WEEE - the case study of gallium, Waste Manag., 60, 534, 10.1016/j.wasman.2016.12.035 · DOI
  50. Vadoudi, 2015, E-waste management and resources recovery in France, Waste Manag. Res., 33, 919, 10.1177/0734242X15597775 · DOI
  51. Van Eygen, 2016, Resource savings by urban mining: the case of desktop and laptop computers in Belgium, Resour. Conserv. Recycl., 107, 53, 10.1016/j.resconrec.2015.10.032 · DOI
  52. Vanegas, 2017, Improvement potential of today's WEEE recycling performance: the case of LCD TVs in Belgium, Front. Environ. Sci. Eng., 11, 13, 10.1007/s11783-017-1000-0 · DOI
  53. Wäger, 2011, Environmental impacts of the Swiss collection and recovery systems for Waste Electrical and Electronic Equipment (WEEE): a follow-up, Sci. Total Environ., 409, 1746, 10.1016/j.scitotenv.2011.01.050 · DOI · Paper page
  54. Wang, 2015, An evaluation of the potential yield of indium recycled from end-of-life LCDs: a case study in China, Waste Manag., 46, 480, 10.1016/j.wasman.2015.07.047 · DOI
  55. Wang, 2018, Watch more, waste more? A stock-driven dynamic material flow analysis of metals and plastics in TV sets in China, J. Clean. Prod., 187, 730, 10.1016/j.jclepro.2018.03.243 · DOI
  56. Yu, 2010, Analysis of material and energy consumption of mobile phones in China, Energy Policy, 38, 4135, 10.1016/j.enpol.2010.03.041 · DOI
  57. Zeng, 2016, Uncovering the recycling potential of “New” WEEE in China, Environ. Sci. Technol., 50, 1347, 10.1021/acs.est.5b05446 · DOI · Paper page
  58. Zhang, 2011, Predicting future quantities of obsolete household appliances in Nanjing by a stock-based model, Resour. Conserv. Recycl., 55, 1087, 10.1016/j.resconrec.2011.06.003 · DOI
  59. Zhang, 2012, Estimating future generation of obsolete household appliances in China, Waste Manag. Res., 30, 1160, 10.1177/0734242X12441238 · DOI

Cited by

See all 200

Metadata

Authors
Islam, M. T., & Huda, N.
Venue
Journal of Environmental Management
Publisher
Elsevier BV
Published
2019-08
Volume
244
Pages
344-361
ISSN
0301-4797 (ISSN-L)
OpenAlex
W2946380248
Cited by
200
References
7
FWCI
7.88
Type
journal article
Language
en
Open access
closed
Licence
  • www.elsevier.com/tdm/userlicense/1.0/ (tdm)
  • www.elsevier.com/legal/tdmrep-license (tdm)
Funders
Macquarie University

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Material flow analysis (MFA) as a strategic tool in E-waste management: Applications, trends and future directions. https://app.cochat.ai/papers/10.1016/j.jenvman.2019.05.062
The paper
Islam, M. T., & Huda, N. (2019). Material flow analysis (MFA) as a strategic tool in E-waste management: Applications, trends and future directions. Journal of Environmental Management. https://doi.org/10.1016/j.jenvman.2019.05.062

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.