A review of microwave pyrolysis as a sustainable plastic waste management technique
The DOI matches its Crossref record; 56 of the 56 references it cites were found in a registry or an index.
Abstract
The high demand for plastic has led to plastic waste accumulation, improper disposal and environmental pollution. Even though some of this waste is recycled, most ends up in landfills or flows down rivers into the oceans. Therefore, researchers are now exploring better ways to solve the plastic waste management problem. From a socio-economic perspective, there is also a concerted effort to enable energy recovery from plastic waste and convert it into useful products to generate income for targeted segments of the population. In fact, this concept of waste-to-wealth has been adopted by the United Nations as part of its Sustainable Development Goals strategies. The current article begins by reviewing the strengths and weaknesses of plastic recycling before focusing specifically on microwave pyrolysis as an alternative to conventional technologies in plastic waste management, due to its benefit in providing fast and energy-efficient heating. The key parameters that are reviewed in this paper include different types of plastic, types of absorbent, temperatures, microwave power, residence time, and catalysts. The yield of the final product (oil, gaseous and char) varies depending on the main process parameters. Key challenges and limitations of microwave pyrolysis are also discussed in this paper.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Mechanical and chemical recycling of solid plastic waste
Ragaert, K., Delva, L., & Van Geem, K. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.044 · Cited by 3,276
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
A review on thermal and catalytic pyrolysis of plastic solid waste (PSW)
Al-Salem, S. M., Antelava, A., Constantinou, A., Manos, G., & Dutta, A. (2017) · Journal of Environmental Management · doi:10.1016/j.jenvman.2017.03.084 · Cited by 1,200
Wu, Z.-S., Ren, W., Gao, L., Zhao, J., Chen, Z., Liu, B., Tang, D., Yu, B., Jiang, C., & Cheng, H.-M. (2009) · ACS Nano · doi:10.1021/nn900020u · Cited by 937
Mishra, R. R., & Sharma, A. K. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.10.035 · Cited by 895
Sun, J., Wang, W., & Yue, Q. (2016) · Materials · doi:10.3390/ma9040231 · Cited by 792
An Overview of Plastic Waste Generation and Management in Food Packaging Industries
Ncube, L. K., Ude, A. U., Ogunmuyiwa, E. N., Zulkifli, R., & Beas, I. N. (2021) · Recycling · doi:10.3390/recycling6010012 · Cited by 647
A review on the microwave-assisted pyrolysis technique
Motasemi, F., & Afzal, M. T. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.08.008 · Cited by 633
López, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., Adrados, A., & Aranzabal, A. (2011) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2011.03.030 · Cited by 479
Catalytic Pyrolysis of Plastic Waste: Moving Toward Pyrolysis Based Biorefineries
Miandad, R., Rehan, M., Barakat, M. A., Aburiazaiza, A. S., Khan, H., Ismail, I. M. I., Dhavamani, J., Gardy, J., Hassanpour, A., & Nizami, A.-S. (2019) · Frontiers in Energy Research · doi:10.3389/fenrg.2019.00027 · Cited by 454
Nabavi-Pelesaraei, A., Bayat, R., Hosseinzadeh-Bandbafha, H., Afrasyabi, H., & Chau, K.-W. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.01.172 · Cited by 449
Fluidised bed pyrolysis of low density polyethylene to produce petrochemical feedstock
Williams, P. T., & Williams, E. A. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00011-x · Cited by 424
Ratnasari, D. K., Nahil, M. A., & Williams, P. T. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.12.027 · Cited by 355
A Review on Waste to Energy Processes Using Microwave Pyrolysis
Lam, S. S., & Chase, H. A. (2012) · Energies · doi:10.3390/en5104209 · Cited by 350
Upcycling waste plastics into carbon nanomaterials: A review
Zhuo, C., & Levendis, Y. A. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.39931 · Cited by 327
Zhou, N., Dai, L., Lv, Y., Li, H., Deng, W., Guo, F., Chen, P., Lei, H., & Ruan, R. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129412 · Cited by 309
Microwave technology for energy-efficient processing of waste
Appleton, T. J., Colder, R. I., Kingman, S. W., Lowndes, I. S., & Read, A. G. (2005) · Applied Energy · doi:10.1016/j.apenergy.2004.07.002 · Cited by 308
Pyrolysis of plastic waste for production of heavy fuel substitute: A techno-economic assessment
Fivga, A., & Dimitriou, I. (2018) · Energy · doi:10.1016/j.energy.2018.02.094 · Cited by 305
Ding, K., Liu, S., Huang, Y., Liu, S., Zhou, N., Peng, P., Wang, Y., Chen, P., & Ruan, R. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.07.001 · Cited by 294
Catalytic pyrolysis of plastic waste for the production of liquid fuels for engines
Budsaereechai, S., Hunt, A. J., & Ngernyen, Y. (2019) · RSC Advances · doi:10.1039/c8ra10058f · Cited by 292
Zhang, X., Lei, H., Yadavalli, G., Zhu, L., Wei, Y., & Liu, Y. (2015) · Fuel · doi:10.1016/j.fuel.2014.12.013 · Cited by 285
A review on the pyrolysis of woody biomass to bio-oil: Focus on kinetic models
Papari, S., & Hawboldt, K. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.07.191 · Cited by 270
Microwave-Induced Pyrolysis of Plastic Wastes
Ludlow-Palafox, C., & Chase, H. A. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie010202j · Cited by 261
Effects of feedstock characteristics on microwave-assisted pyrolysis – A review
Zhang, Y., Chen, P., Liu, S., Peng, P., Min, M., Cheng, Y., Anderson, E., Zhou, N., Fan, L., Liu, C., et al. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.01.046 · Cited by 260
Feedstock recycling of polyethylene in a two-step thermo-catalytic reaction system
Aguado, J., Serrano, D. P., San Miguel, G., Castro, M. C., & Madrid, S. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2006.11.008 · Cited by 258
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.06.046 · Cited by 253
Predicting Pyrolysis Products of PE, PP, and PET Using NRTL Activity Coefficient Model
FakhrHoseini, S. M., & Dastanian, M. (2013) · Journal of Chemistry · doi:10.1155/2013/487676 · Cited by 239
Pyrolysis production of fruit peel biochar for potential use in treatment of palm oil mill effluent
Lam, S. S., Liew, R. K., Cheng, C. K., Rasit, N., Ooi, C. K., Ma, N. L., Ng, J.-H., Lam, W. H., Chong, C. T., & Chase, H. A. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.02.092 · Cited by 216
Fast microwave-assisted pyrolysis of wastes for biofuels production – A review
Zhang, Y., Cui, Y., Liu, S., Fan, L., Zhou, N., Peng, P., Wang, Y., Guo, F., Min, M., Cheng, Y., et al. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2019.122480 · Cited by 214
Fan, L., Zhang, Y., Liu, S., Zhou, N., Chen, P., Liu, Y., Wang, Y., Peng, P., Cheng, Y., Addy, M., et al. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.07.039 · Cited by 195
Utilization of municipal solid and liquid wastes for bioenergy and bioproducts production
Chen, P., Xie, Q., Addy, M., Zhou, W., Liu, Y., Wang, Y., Cheng, Y., Li, K., & Ruan, R. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.02.094 · Cited by 193
Efficient disposal of waste polyolefins through microwave assisted pyrolysis
Undri, A., Rosi, L., Frediani, M., & Frediani, P. (2014) · Fuel · doi:10.1016/j.fuel.2013.08.037 · Cited by 182
Conventional and microwave-assisted pyrolysis of biomass under different heating rates
Wu, C., Budarin, V. L., Gronnow, M. J., De Bruyn, M., Onwudili, J. A., Clark, J. H., & Williams, P. T. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.03.012 · Cited by 174
Wan Mahari, W. A., Chong, C. T., Cheng, C. K., Lee, C. L., Hendrata, K., Yuh Yek, P. N., Ma, N. L., & Lam, S. S. (2018) · Energy · doi:10.1016/j.energy.2018.08.002 · Cited by 159
Reverse polymerization of waste polystyrene through microwave assisted pyrolysis
Undri, A., Frediani, M., Rosi, L., & Frediani, P. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.10.001 · Cited by 144
Nabavi‐Pelesaraei, A., Bayat, R., Hosseinzadeh-Bandbafha, H., Afrasyabi, H., & Berrada, A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.04.033 · Cited by 142
Catalytic pyrolysis of waste plastic from electrical and electronic equipment
Muhammad, C., Onwudili, J. A., & Williams, P. T. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.02.016 · Cited by 133
Zhou, J., Liu, S., Zhou, N., Fan, L., Zhang, Y., Peng, P., Anderson, E., Ding, K., Wang, Y., Liu, Y., et al. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.02.034 · Cited by 132
Rex, P., Shruthi, M., & Miranda, L. R. (2018) · Waste Management · doi:10.1016/j.wasman.2018.03.029 · Cited by 118
Microwave–metal interaction pyrolysis of polystyrene
Hussain, Z., Khan, K. M., & Hussain, K. (2010) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2010.05.003 · Cited by 116
Hussain, Z., Khan, K. M., Perveen, S., Hussain, K., & Voelter, W. (2011) · Fuel Processing Technology · doi:10.1016/j.fuproc.2011.10.009 · Cited by 99
Rex, P., Masilamani, I. P., & Miranda, L. R. (2020) · Journal of the Energy Institute · doi:10.1016/j.joei.2020.03.013 · Cited by 98
Microwave assisted pyrolysis of halogenated plastics recovered from waste computers
Rosi, L., Bartoli, M., & Frediani, M. (2017) · Waste Management · doi:10.1016/j.wasman.2017.04.037 · Cited by 88
Microwave Heating of Pure Copper Powder with Varying Particle Size and Porosity
Mondal, A., Agrawal, D., & Upadhyaya, A. (2008) · Journal of Microwave Power and Electromagnetic Energy · doi:10.1080/08327823.2008.11688599 · Cited by 85
Microwave Assisted Pyrolysis of Plastic Waste
Aishwarya, K. N., & Sindhu, N. (2016) · Procedia Technology · doi:10.1016/j.protcy.2016.08.197 · Cited by 82
An Overview of Temperature Issues in Microwave-Assisted Pyrolysis
Bartoli, M., Frediani, M., Briens, C. L., Berruti, F., & Rosi, L. (2019) · Processes · doi:10.3390/pr7100658 · Cited by 70
Jing, X., Dong, J., Huang, H., Deng, Y., Wen, H., Xu, Z., & Ceylan, S. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.125857 · Cited by 67
Hussain, Z., Khan, K. M., Basheer, N., & Hussain, K. (2010) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2010.10.002 · Cited by 62
Microwave-assisted low-temperature biomass pyrolysis: from mechanistic insights to pilot scale
Luo, H., Zhang, Y., Zhu, H., Zhao, X., Zhu, L., Liu, W., Sun, M., Miao, G., Li, S., & Kong, L. (2020) · Green Chemistry · doi:10.1039/d0gc03348k · Cited by 61
Ghodrat, M., Alonso, J. A., Hagare, D., Yang, R., & Samali, B. (2019) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-019-02293-8 · Cited by 56
Fan, L., Su, Z., Wu, J., Xiao, Z., Huang, P., Liu, L., Jiang, H., Zhou, W., Liu, S., & Ruan, R. R. (2021) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105213 · Cited by 56
Microwave Pyrolysis of Plastic
Khaghanikavkani, E. (2013) · Journal of Chemical Engineering & Process Technology · doi:10.4172/2157-7048.1000150 · Cited by 45
Arshad, H., Sulaıman, S. A., Hussain, Z., Naz, M. Y., & Moni, M. N. Z. (2020) · Waste and Biomass Valorization · doi:10.1007/s12649-020-01225-9 · Cited by 32
Microwave Pyrolysis of Plastic Wastes
Ludlow-Palafox, C., & Chase, H. A. (2006) · doi:10.1002/0470021543.ch21 · Cited by 19
Arshad, H., Sulaiman, S. A., Hussain, Z., & Moni, M. N. Z. (2020) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/863/1/012007 · Cited by 8
Cited by
Plastic waste as pyrolysis feedstock for plastic oil production: A review
Chang, S. H. (2023) · Science of The Total Environment · doi:10.1016/j.scitotenv.2023.162719 · Cited by 302
Hussain, K. A., Romanova, S., Okur, I., Zhang, D., Kuebler, J., Huang, X., Wang, B., Fernandez-Ballester, L., Lu, Y., Schubert, M., et al. (2023) · Environmental Science & Technology · doi:10.1021/acs.est.3c01942 · Cited by 295
Abbas-Abadi, M. S., Ureel, Y., Eschenbacher, A., Vermeire, F. H., Varghese, R. J., Oenema, J., Stefanidis, G. D., & Van Geem, K. M. (2023) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101046 · Cited by 221
Xie, M., Xu, H., Wang, Y., Pan, H., Duan, D., Niu, B., Long, D., & Zhang, Y. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.144460 · Cited by 22
Metadata
- Authors
- Putra, P. H. M., Rozali, S., Patah, M. F. A., & Idris, A.
- Venue
- Journal of Environmental Management
- Publisher
- Elsevier BV
- Published
- 2022-02
- Volume
- 303
- Pages
- 114240
- ISSN
- 0301-4797 (ISSN-L)
- OpenAlex
- W4200308380
- Cited by
- 165
- References
- 56
- FWCI
- 6.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.