The DOI matches its Crossref record; 106 of the 106 references it cites were found in a registry or an index.
Selective laser melting of Ti6Al4V alloy: Process parameters, defects and post-treatments
Abstract
Abstract Selective laser melting (SLM) has received huge attention recently by the research community due to feasibility of realization of tailored intricate metallic structures having applications in biomedical, aviation and energy industries. SLM of Ti6Al4 V is found to be one of the most demandable and potential area. Present work is aimed for critical review of noteworthy contributions in terms of SLM process parameters, defects and various post processing techniques considered by various researchers. Proper selection of process parameters can arrest the tendency of defect generation and appropriate post treatment results in improvement in mechanical behavior in comparison with as-built SLMed Ti6Al4 V components. Efforts have been made to identify correlations between SLM parameters, specially scan speed, laser power, hatch spacing and layer thickness, with prominent defects. Different post processing approaches considered by important research studies have been extensively analyzed and their impact on defects and mechanical behavior especially fatigue performance and biocompatibility of SLM-fabricated Ti6Al4 V alloy is revealed. Many remedies have been identified in the form of optimization of process parameters and post processing techniques. The outcomes of work have clearly facilitated in developing a better scientific understanding of SLMed Ti6Al4V alloy and have also opened many dimensions for future investigations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
Geetha, M., Singh, A. K., Asokamani, R., & Gogia, A. K. (2009) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.06.004 · Cited by 5,416
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Vrancken, B., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.07.022 · Cited by 1,896
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Selective laser melting of iron-based powder
Kruth, J. P., Froyen, L., Van Vaerenbergh, J., Mercelis, P., Rombouts, M., & Lauwers, B. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2003.11.051 · Cited by 1,550
Leuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., Richard, H. A., & Maier, H. J. (2013) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2012.11.011 · Cited by 1,475
Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth, J.-P., Levy, G., Klocke, F., & Childs, T. H. C. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.004 · Cited by 1,444
Vilaro, T., Colin, C., & Bartout, J. D. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0731-y · Cited by 1,283
King, W. E., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Physics Reviews · doi:10.1063/1.4937809 · Cited by 1,258
Xu, W., Brandt, M., Sun, S., Elambasseril, J., Liu, Q., Latham, K., Xia, K., & Qian, M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.11.028 · Cited by 1,245
Gong, H., Rafi, K., Gu, H., Starr, T., & Stucker, B. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.002 · Cited by 1,038
Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V
Simonelli, M., Tse, Y. Y., & Tuck, C. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.07.086 · Cited by 1,010
Murr, L. E., Quinones, S. A., Gaytan, S. M., Lopez, M. I., Rodela, A., Martinez, E. Y., Hernandez, D. H., Martinez, E., Medina, F., & Wicker, R. B. (2009) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2008.05.004 · Cited by 997
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
Vandenbroucke, B., & Kruth, J. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776142 · Cited by 981
Gong, H., Rafi, K., Gu, H., Janaki Ram, G. D., Starr, T., & Stucker, B. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.07.147 · Cited by 940
Gorsse, S., Hutchinson, C., Gouné, M., & Banerjee, R. (2017) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2017.1361305 · Cited by 920
Fatigue performance evaluation of selective laser melted Ti–6Al–4V
Edwards, P., & Ramulu, M. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.01.041 · Cited by 874
Qiu, C., Adkins, N. J. E., & Attallah, M. M. (2013) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.04.099 · Cited by 821
Kasperovich, G., Haubrich, J., Gussone, J., & Requena, G. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.070 · Cited by 818
Van Bael, S., Chai, Y. C., Truscello, S., Moesen, M., Kerckhofs, G., Van Oosterwyck, H., Kruth, J.-P., & Schrooten, J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.001 · Cited by 766
Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
Attar, H., Calin, M., Zhang, L. C., Scudino, S., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.11.038 · Cited by 744
Rapid manufacturing of metal components by laser forming
Santos, E. C., Shiomi, M., Osakada, K., & Laoui, T. (2006) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2005.09.005 · Cited by 740
Additive manufacturing of biomaterials
Bose, S., Ke, D., Sahasrabudhe, H., & Bandyopadhyay, A. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.08.003 · Cited by 738
Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
Kasperovich, G., & Hausmann, J. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.01.025 · Cited by 735
Yan, C., Hao, L., Hussein, A., & Young, P. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.06.024 · Cited by 717
Zhao, X., Li, S., Zhang, M., Liu, Y., Sercombe, T. B., Wang, S., Hao, Y., Yang, R., & Murr, L. E. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.135 · Cited by 673
Shipley, H., McDonnell, D., Culleton, M., Coull, R., Lupoi, R., O’Donnell, G. E., & Trimble, D. (2018) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2018.01.003 · Cited by 643
An overview of residual stresses in metal powder bed fusion
Bartlett, J. L., & Li, X. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.02.020 · Cited by 616
Yuan, L., Ding, S., & Wen, C. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2018.12.003 · Cited by 593
Arabnejad, S., Burnett Johnston, R., Pura, J. A., Singh, B., Tanzer, M., & Pasini, D. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.10.048 · Cited by 578
Direct selective laser sintering of metals
Agarwala, M., Bourell, D., Beaman, J., Marcus, H., & Barlow, J. (1995) · Rapid Prototyping Journal · doi:10.1108/13552549510078113 · Cited by 571
Li, P., Warner, D. H., Fatemi, A., & Phan, N. (2016) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2015.12.003 · Cited by 546
Additive Manufacturing of Metallic Materials: A Review
Zhang, Y., Wu, L., Guo, X., Kane, S., Deng, Y., Jung, Y.-G., Lee, J.-H., & Zhang, J. (2018) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-017-2747-y · Cited by 521
Tan, X. P., Tan, Y. J., Chow, C. S. L., Tor, S. B., & Yeong, W. Y. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.02.094 · Cited by 514
Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime
Günther, J., Krewerth, D., Lippmann, T., Leuders, S., Tröster, T., Weidner, A., Biermann, H., & Niendorf, T. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.05.018 · Cited by 475
Wauthle, R., Vrancken, B., Beynaerts, B., Jorissen, K., Schrooten, J., Kruth, J.-P., & Van Humbeeck, J. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2014.12.008 · Cited by 463
Additive Manufacturing of Biomaterials, Tissues, and Organs
Zadpoor, A. A., & Malda, J. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1719-y · Cited by 462
Microstructural Control of Additively Manufactured Metallic Materials
Collins, P. C., Brice, D. A., Samimi, P., Ghamarian, I., & Fraser, H. L. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031816 · Cited by 461
Song, B., Dong, S., Zhang, B., Liao, H., & Coddet, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.09.051 · Cited by 429
Fundamentals of Selective Laser Melting of alloyed steel powders
Rombouts, M., Kruth, J. P., Froyen, L., & Mercelis, P. (2006) · CIRP Annals · doi:10.1016/s0007-8506(07)60395-3 · Cited by 400
Additive manufacturing of titanium alloy for aircraft components
Uhlmann, E., Kersting, R., Klein, T. B., Cruz, M. F., & Borille, A. V. (2015) · Procedia CIRP · doi:10.1016/j.procir.2015.08.061 · Cited by 386
A review of powder additive manufacturing processes for metallic biomaterials
Harun, W. S. W., Kamariah, M. S. I. N., Muhamad, N., Ghani, S. A. C., Ahmad, F., & Mohamed, Z. (2018) · Powder Technology · doi:10.1016/j.powtec.2017.12.058 · Cited by 379
Yadroitsev, I., Thivillon, L., Bertrand, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.08.046 · Cited by 351
Rafi, H. K., Starr, T. L., & Stucker, B. E. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5106-7 · Cited by 335
Brandl, E., Schoberth, A., & Leyens, C. (2012) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.10.095 · Cited by 327
Yan, X., Yin, S., Chen, C., Huang, C., Bolot, R., Lupoi, R., Kuang, M., Ma, W., Coddet, C., Liao, H., et al. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.06.076 · Cited by 326
Chen, Z., Yan, X., Yin, S., Liu, L., Liu, X., Zhao, G., Ma, W., Qi, W., Ren, Z., Liao, H., et al. (2020) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.110289 · Cited by 324
Van Hooreweder, B., Apers, Y., Lietaert, K., & Kruth, J.-P. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.10.005 · Cited by 318
On the fatigue properties of metals manufactured by selective laser melting – The role of ductility
Leuders, S., Lieneke, T., Lammers, S., Tröster, T., & Niendorf, T. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.157 · Cited by 309
Kolbus, L. M., Payzant, E. A., Cornwell, P., Watkins, T. R., Babu, S. S., Dehoff, R., Lorenz, M., Ovchinnikova, O. S., & Duty, C. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-014-2722-2 · Cited by 302
Benedetti, M., Fontanari, V., Bandini, M., Zanini, F., & Carmignato, S. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.10.021 · Cited by 297
Trevisan, F., Calignano, F., Aversa, A., Marchese, G., Lombardi, M., Biamino, S., Ugues, D., & Manfredi, D. (2018) · Journal of Applied Biomaterials & Functional Materials · doi:10.5301/jabfm.5000371 · Cited by 295
Wu, S., Lu, Y., Gan, Y. L., Huang, T., Zhao, C. Q., Lin, J., Guo, S., & Lin, J. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.02.183 · Cited by 292
Fatemi, A., Molaei, R., Sharifimehr, S., Phan, N., & Shamsaei, N. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.03.044 · Cited by 282
Biomedical titanium alloys and their additive manufacturing
Hao, Y., Li, S., & Yang, R. (2016) · Rare Metals · doi:10.1007/s12598-016-0793-5 · Cited by 267
Benedetti, M., Torresani, E., Leoni, M., Fontanari, V., Bandini, M., Pederzolli, C., & Potrich, C. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.03.024 · Cited by 248
Dallago, M., Winiarski, B., Zanini, F., Carmignato, S., & Benedetti, M. (2019) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.03.019 · Cited by 222
Xiu, P., Jia, Z., Lv, J., Yin, C., Cheng, Y., Zhang, K., Song, C., Leng, H., Zheng, Y., Cai, H., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b05893 · Cited by 221
High Cycle Fatigue (HCF) Performance of Ti-6Al-4V Alloy Processed by Selective Laser Melting
Wycisk, E., Emmelmann, C., Siddique, S., & Walther, F. (2013) · Advanced Materials Research · doi:10.4028/www.scientific.net/amr.816-817.134 · Cited by 215
Additive Manufacturing of Metals: The Technology, Materials, Design and Production
Yang, L., Hsu, K., Baughman, B., Godfrey, D., Medina, F., Menon, M., & Wiener, S. (2017) · Springer Series in Advanced Manufacturing · doi:10.1007/978-3-319-55128-9 · Cited by 215
Gorny, B., Niendorf, T., Lackmann, J., Thoene, M., Troester, T., & Maier, H. J. (2011) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.07.026 · Cited by 213
A review of powdered additive manufacturing techniques for Ti-6al-4v biomedical applications
Harun, W. S. W., Manam, N. S., Kamariah, M. S. I. N., Sharif, S., Zulkifly, A. H., Ahmad, I., & Miura, H. (2018) · Powder Technology · doi:10.1016/j.powtec.2018.03.010 · Cited by 211
Three-Dimensional Temperature Gradient Mechanism in Selective Laser Melting of Ti-6Al-4V
Fu, C. H., & Guo, Y. B. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028539 · Cited by 208
Agius, D., Kourousis, K. I., & Wallbrink, C. (2018) · Metals · doi:10.3390/met8010075 · Cited by 205
Liu, Q. C., Elambasseril, J., Sun, S. J., Leary, M., Brandt, M., & Sharp, P. K. (2014) · Advanced Materials Research · doi:10.4028/www.scientific.net/amr.891-892.1519 · Cited by 201
Dunbar, A. J., Denlinger, E. R., Heigel, J. C., Michaleris, P., Guerrier, P. K., Martukanitz, R. P., & Simpson, T. W. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.04.007 · Cited by 200
Fatemi, A., Molaei, R., Simsiriwong, J., Sanaei, N., Pegues, J., Torries, B., Phan, N., & Shamsaei, N. (2019) · Fatigue & Fracture of Engineering Materials & Structures · doi:10.1111/ffe.13000 · Cited by 199
Laser peening: A tool for additive manufacturing post-processing
Hackel, L., Rankin, J. R., Rubenchik, A., King, W. E., & Matthews, M. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.09.013 · Cited by 194
Wycisk, E., Siddique, S., Herzog, D., Walther, F., & Emmelmann, C. (2015) · Frontiers in Materials · doi:10.3389/fmats.2015.00072 · Cited by 193
Porosity testing methods for the quality assessment of selective laser melted parts
Wits, W. W., Carmignato, S., Zanini, F., & Vaneker, T. H. J. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.04.054 · Cited by 190
Dallago, M., Fontanari, V., Torresani, E., Leoni, M., Pederzolli, C., Potrich, C., & Benedetti, M. (2018) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.11.044 · Cited by 182
Tang, H., Yang, G. Y., Jia, W., He, W., Lu, S., & Qian, M. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.03.079 · Cited by 164
Mechanical properties of a Ti6Al4V porous structure produced by selective laser melting
Sun, J., Yang, Y., & Wang, D. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.01.038 · Cited by 163
The Additive Manufacturing (AM) of Titanium Alloys
Froes, F. H., & Dutta, B. (2014) · Advanced Materials Research · doi:10.4028/www.scientific.net/amr.1019.19 · Cited by 158
Design for Additive Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. E. (2009) · Springer eBooks · doi:10.1007/978-1-4419-1120-9_11 · Cited by 154
Zhang, H., Chiang, R., Qin, H., Ren, Z., Hou, X., Lin, D. L., Doll, G. L., Vasudevan, V. K., Dong, Y., & Ye, C. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.05.019 · Cited by 148
Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting
Leuders, S., Vollmer, M., Brenne, F., Tröster, T., & Niendorf, T. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-2864-x · Cited by 146
Chen, S. Y., Huang, J. C., Pan, C., Lin, C., Yang, T.-J., Huang, Y.-C., Ou, C. H., Chen, L. Y., Lin, D. Y., Lin, H. K., et al. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.04.190 · Cited by 136
A Review of the Fatigue Properties of Additively Manufactured Ti-6Al-4V
Cao, F., Zhang, T., Ryder, M. A., & Lados, D. A. (2018) · JOM · doi:10.1007/s11837-017-2728-5 · Cited by 134
Investigation of Residual Stresses Induced during the Selective Laser Melting Process
Belle, L. V., Vansteenkiste, G., & Boyer, J. C. (2013) · Key engineering materials · doi:10.4028/www.scientific.net/kem.554-557.1828 · Cited by 130
Kumar, A., Nune, K. C., Murr, L. E., & Misra, R. D. K. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1128310 · Cited by 129
Tong, J., Bowen, C., Persson, J., & Plummer, A. R. (2016) · Materials Science and Technology · doi:10.1080/02670836.2016.1172787 · Cited by 115
Fatigue strength of blunt V-notched specimens produced by selective laser melting of Ti-6Al-4V
Razavi, N., Ferro, P., Berto, F., & Torgersen, J. (2017) · Theoretical and Applied Fracture Mechanics · doi:10.1016/j.tafmec.2017.06.021 · Cited by 115
Karami, K., Blok, A.-N., Weber, L., Ahmadi, S. M., Petrov, R., Nikolic, K., Borisov, E. V., Leeflang, M. A., Ayas, C., ZADPOOR, A. A., et al. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101433 · Cited by 113
Salem, H. G., Carter, L. N., Attallah, M. M., & Salem, H. G. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138387 · Cited by 112
Tsai, M.-T., Chen, Y., Chao, C.-Y., Jang, J. S. C., Tsai, C.-C., Su, Y.-L., & Kuo, C. N. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.152615 · Cited by 102
Khorasani, A. M., Gibson, I., Goldberg, M., & Littlefair, G. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2016-0022 · Cited by 101
Recent progress in the simulation of microstructure evolution in titanium alloys
Zhang, J., Li, X., Xu, D., & Yang, R. (2019) · Progress in Natural Science Materials International · doi:10.1016/j.pnsc.2019.05.006 · Cited by 92
Additive Manufacturing of Titanium Alloys for Orthopedic Applications: A Materials Science Viewpoint
Majumdar, T., Eisenstein, N., Frith, J. E., Cox, S. C., & Birbilis, N. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201800172 · Cited by 85
Fatigue and fracture properties of Ti alloys from powder-based processes – A review
Romero, C., Yang, F., & Bolzoni, L. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.08.029 · Cited by 83
Chen, C., Hao, Y., Bai, X. Y., Ni, J., Chung, S., Liu, F., & Lee, I.-S. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107824 · Cited by 75
Vastola, G., Zhang, G., Pei, Q., & Zhang, Y. (2016) · JOM · doi:10.1007/s11837-016-1890-5 · Cited by 69
Enhancing Biocompatibility and Corrosion Resistance of Ti-6Al-4V Alloy by Surface Modification Route
Sarao, T. P. S., Singh, H., & Singh, H. (2018) · Journal of Thermal Spray Technology · doi:10.1007/s11666-018-0746-7 · Cited by 62
Powder bed fusion additive layer manufacturing of titanium alloys
Sabzi, H. E. (2019) · Materials Science and Technology · doi:10.1080/02670836.2019.1602974 · Cited by 61
Crack Propagation in Additive Manufactured Materials and Structures
Riemer, A., & Richard, H. A. (2016) · Procedia Structural Integrity · doi:10.1016/j.prostr.2016.06.157 · Cited by 47
Vastola, G., Zhang, G., Pei, Q., & Zhang, Y. (2016) · JOM · doi:10.1007/s11837-016-1990-2 · Cited by 33
Fatigue and Fracture Toughness of Ti-6Al-4V Titanium Alloy Manufactured by Selective Laser Melting
Dhansay, N. M., Tait, R. B., & Becker, T. H. (2014) · Advanced materials research · doi:10.4028/www.scientific.net/amr.1019.248 · Cited by 31
The direct metal laser remelting of copper and tool steel powders
Pogson, S., Fox, P., O’Neill, W., & Sutcliffe, C. J. (2004) · Materials Science and Engineering A · doi:10.1016/s0921-5093(04)01051-2 · Cited by 29
hadad, A. A. E., García-Galván, F. R., Mezour, M. A., Hickman, G. J., Soliman, I. E., Jiménez‐Morales, A., Barranco, V., Galván, J. C., & Perry, C. C. (2020) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2020.105834 · Cited by 26
Cited by
State-of-the-art of selective laser melting process: A comprehensive review
Sefene, E. M. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.04.002 · Cited by 429
A review on laser cladding of high-entropy alloys, their recent trends and potential applications
Arif, Z. U., Khalid, M. Y., ur Rehman, E., Ullah, S., Atif, M., & Tariq, A. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.06.041 · Cited by 334
Metadata
- Authors
- Singla, A. K., Banerjee, M., Sharma, A., Singh, J., Bansal, A., Gupta, M. K., Khanna, N., Shahi, A. S., & Goyal, D. K.
- Venue
- Journal of Manufacturing Processes
- Publisher
- Elsevier BV
- Published
- 2021-04
- Volume
- 64
- Pages
- 161-187
- ISSN
- 1526-6125 (ISSN-L)
- OpenAlex
- W3127846343
- Cited by
- 383
- References
- 106
- FWCI
- 24.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.