The DOI matches its Crossref record; 74 of the 74 references it cites were found in a registry or an index.
A nonlinear mechanics model of bio-inspired hierarchical lattice materials consisting of horseshoe microstructures
Open accessAbstract
Development of advanced synthetic materials that can mimic the mechanical properties of non-mineralized soft biological materials has important implications in a wide range of technologies. Hierarchical lattice materials constructed with horseshoe microstructures belong to this class of bio-inspired synthetic materials, where the mechanical responses can be tailored to match the nonlinear J-shaped stress-strain curves of human skins. The underlying relations between the J-shaped stress-strain curves and their microstructure geometry are essential in designing such systems for targeted applications. Here, a theoretical model of this type of hierarchical lattice material is developed by combining a finite deformation constitutive relation of the building block (i.e., horseshoe microstructure), with the analyses of equilibrium and deformation compatibility in the periodical lattices. The nonlinear J-shaped stress-strain curves and Poisson ratios predicted by this model agree very well with results of finite element analyses (FEA) and experiment. Based on this model, analytic solutions were obtained for some key mechanical quantities, e.g., elastic modulus, Poisson ratio, peak modulus, and critical strain around which the tangent modulus increases rapidly. A negative Poisson effect is revealed in the hierarchical lattice with triangular topology, as opposed to a positive Poisson effect in hierarchical lattices with Kagome and honeycomb topologies. The lattice topology is also found to have a strong influence on the stress-strain curve. For the three isotropic lattice topologies (triangular, Kagome and honeycomb), the hierarchical triangular lattice material renders the sharpest transition in the stress-strain curve and relative high stretchability, given the same porosity and arc angle of horseshoe microstructure. Furthermore, a demonstrative example illustrates the utility of the developed model in the rapid optimization of hierarchical lattice materials for reproducing the desired stress-strain curves of human skins. This study provides theoretical guidelines for future designs of soft bio-mimetic materials with hierarchical lattice constructions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials and Mechanics for Stretchable Electronics
Rogers, J. A., Someya, T., & Huang, Y. (2010) · Science · doi:10.1126/science.1182383 · Cited by 5,042
Self-citationKim, D.-H., Lu, N., Ma, R., Kim, Y.-S., Kim, R.-H., Wang, S., Wu, J., Won, S. M., Tao, H., Islam, A., et al. (2011) · Science · doi:10.1126/science.1206157 · Cited by 4,836
Self-citationBioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity
Wong, T.-S., Kang, S. H., Tang, S. K. Y., Smythe, E. J., Hatton, B. D., Grinthal, A., & Aizenberg, J. (2011) · Nature · doi:10.1038/nature10447 · Cited by 4,134
Theory of Elastic Stability: Analysis and Sensitivity
Godoy, L. A. (2024) · CRC Press eBooks · doi:10.1201/9781003578659 · Cited by 2,214
Soft robotics: a bioinspired evolution in robotics
Kim, S., Laschi, C., & Trimmer, B. (2013) · Trends in Biotechnology · doi:10.1016/j.tibtech.2013.03.002 · Cited by 2,092
Materials become insensitive to flaws at nanoscale: Lessons from nature
Gao, H., Ji, B., Jäger, I. L., Arzt, E., & Fratzl, P. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0631609100 · Cited by 1,922
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822
A Stretchable Form of Single-Crystal Silicon for High-Performance Electronics on Rubber Substrates
Khang, D.-Y., Jiang, H., Huang, Y., & Rogers, J. A. (2006) · Science · doi:10.1126/science.1121401 · Cited by 1,689
Self-citationFoam topology: bending versus stretching dominated architectures
Deshpande, V. S., Ashby, M. F., & Fleck, N. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00379-7 · Cited by 1,623
Nanostructured artificial nacre
Tang, Z., Kotov, N. A., Magonov, S., & Ozturk, B. (2003) · Nature Materials · doi:10.1038/nmat906 · Cited by 1,454
Biomimetism and bioinspiration as tools for the design of innovative materials and systems
Sanchez, C., Arribart, H., & Giraud Guille, M. M. (2005) · Nature Materials · doi:10.1038/nmat1339 · Cited by 1,449
Nanoconfinement controls stiffness, strength and mechanical toughness of β-sheet crystals in silk
Keten, S., Xu, Z., Ihle, B., & Buehler, M. J. (2010) · Nature Materials · doi:10.1038/nmat2704 · Cited by 1,391
Highly Conductive and Stretchable Silver Nanowire Conductors
Xu, F., & Zhu, Y. (2012) · Advanced Materials · doi:10.1002/adma.201201886 · Cited by 1,314
The mechanical design of nacre
Jackson, A. P., Vincent, J. F. V., & Turner, R. M. (1988) · Proceedings of the Royal Society of London. Series B. Biological Sciences · doi:10.1098/rspb.1988.0056 · Cited by 1,269
Soft Microfluidic Assemblies of Sensors, Circuits, and Radios for the Skin
Xu, S., Zhang, Y., Jia, L., Mathewson, K. E., Jang, K.-I., Kim, J., Fu, H., Huang, X., Chava, P., Wang, R., et al. (2014) · Science · doi:10.1126/science.1250169 · Cited by 1,199
Self-citationStructural Biological Materials: Critical Mechanics-Materials Connections
Meyers, M. A., McKittrick, J., & Chen, P.-Y. (2013) · Science · doi:10.1126/science.1220854 · Cited by 1,171
Skeleton of Euplectella sp.: Structural Hierarchy from the Nanoscale to the Macroscale
Aizenberg, J., Weaver, J. C., Thanawala, M. S., Sundar, V. C., Morse, D. E., & Fratzl, P. (2005) · Science · doi:10.1126/science.1112255 · Cited by 1,144
The topological design of multifunctional cellular metals
Evans, A. G., Hutchinson, J. W., Fleck, N. A., Ashby, M. F., & Wadley, H. N. G. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00016-5 · Cited by 1,134
Design of an artificial skin. I. Basic design principles
Yannas, I. V., & Burke, J. F. (1980) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820140108 · Cited by 1,044
Design strategies in mineralized biological materials
Weiner, S., & Addadi, L. (1997) · Journal of Materials Chemistry · doi:10.1039/a604512j · Cited by 1,034
Bioinspired Design and Assembly of Platelet Reinforced Polymer Films
Bonderer, L. J., Studart, A. R., & Gauckler, L. J. (2008) · Science · doi:10.1126/science.1148726 · Cited by 1,031
Wearable multifunctional sensors using printed stretchable conductors made of silver nanowires
Yao, S., & Zhu, Y. (2014) · Nanoscale · doi:10.1039/c3nr05496a · Cited by 1,028
Stimuli-Responsive Polymer Nanocomposites Inspired by the Sea Cucumber Dermis
Capadona, J. R., Shanmuganathan, K., Tyler, D. J., Rowan, S. J., & Weder, C. (2008) · Science · doi:10.1126/science.1153307 · Cited by 962
Strong, tough and stiff bioinspired ceramics from brittle constituents
Bouville, F., Maire, E., Meille, S., Van de Moortèle, B., Stevenson, A. J., & Deville, S. (2014) · Nature Materials · doi:10.1038/nmat3915 · Cited by 959
Mechanical properties of nanostructure of biological materials
Ji, B., & Gao, H. (2004) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2004.03.006 · Cited by 908
Negative Poisson's Ratio Behavior Induced by an Elastic Instability
Bertoldi, K., Reis, P. M., Willshaw, S., & Mullin, T. (2010) · Advanced Materials · doi:10.1002/adma.200901956 · Cited by 903
Design of an artificial skin. I. Basic design principles
Yannas, I. V., & Burke, J. F. (1980) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820140314 · Cited by 889
3D Soft Metamaterials with Negative Poisson's Ratio
Babaee, S., Shim, J., Weaver, J. C., Chen, E. R., Patel, N., & Bertoldi, K. (2013) · Advanced Materials · doi:10.1002/adma.201301986 · Cited by 856
Bio-Inspired Polymer Composite Actuator and Generator Driven by Water Gradients
Ma, M., Guo, L., Anderson, D. G., & Langer, R. (2013) · Science · doi:10.1126/science.1230262 · Cited by 849
Camouflage and Display for Soft Machines
Morin, S. A., Shepherd, R. F., Kwok, S. W., Stokes, A. A., Nemiroski, A., & Whitesides, G. M. (2012) · Science · doi:10.1126/science.1222149 · Cited by 768
Characterization of the anisotropic mechanical properties of excised human skin
Ní Annaidh, A., Bruyère, K., Destrade, M., Gilchrist, M. D., & Otténio, M. (2012) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2011.08.016 · Cited by 763
On the Mechanistic Origins of Toughness in Bone
Launey, M. E., Buehler, M. J., & Ritchie, R. O. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104427 · Cited by 741
Kim, D.-H., Song, J., Choi, W. M., Kim, H.-S., Kim, R.-H., Liu, Z., Huang, Y. Y., Hwang, K.-C., Zhang, Y.-W., & Rogers, J. A. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0807476105 · Cited by 737
Self-citationNanomaterial‐Enabled Stretchable Conductors: Strategies, Materials and Devices
Yao, S., & Zhu, Y. (2015) · Advanced Materials · doi:10.1002/adma.201404446 · Cited by 695
Hierarchical Structure and Nanomechanics of Collagen Microfibrils from the Atomistic Scale Up
Gautieri, A., Vesentini, S., Redaelli, A., & Buehler, M. J. (2011) · Nano Letters · doi:10.1021/nl103943u · Cited by 690
Fibrillar Structure and Mechanical Properties of Collagen
Fratzl, P., Misof, K., Zizak, I., Rapp, G., Amenitsch, H., & Bernstorff, S. (1998) · Journal of Structural Biology · doi:10.1006/jsbi.1998.3966 · Cited by 667
Rigid Biological Systems as Models for Synthetic Composites
Mayer, G. (2005) · Science · doi:10.1126/science.1116994 · Cited by 645
Molecular Orientation and Two-Component Nature of the Crystalline Fraction of Spider Dragline Silk
Simmons, A. H., Michal, C. A., & Jelinski, L. W. (1996) · Science · doi:10.1126/science.271.5245.84 · Cited by 632
Soft network composite materials with deterministic and bio-inspired designs
Jang, K.-I., Chung, H. U., Xu, S., Lee, C. H., Luan, H., Jeong, J., Cheng, H., Kim, G.-T., Han, S. Y., Lee, J. W., et al. (2015) · Nature Communications · doi:10.1038/ncomms7566 · Cited by 533
Self-citationNonlinear material behaviour of spider silk yields robust webs
Cranford, S. W., Tarakanova, A., Pugno, N. M., & Buehler, M. J. (2012) · Nature · doi:10.1038/nature10739 · Cited by 500
Shergold, O. A., Fleck, N. A., & Radford, D. (2006) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2004.11.010 · Cited by 460
In-Plane Stiffness and Yield Strength of Periodic Metal Honeycombs
Wang, A.-J., & McDowell, D. L. (2004) · Journal of Engineering Materials and Technology · doi:10.1115/1.1646165 · Cited by 456
Effect of imperfections on the yielding of two-dimensional foams
Chen, C., Lu, T. J., & Fleck, N. A. (1999) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(99)00030-7 · Cited by 435
Self-Organization of a Mesoscale Bristle into Ordered, Hierarchical Helical Assemblies
Pokroy, B., Kang, S. H., Mahadevan, L., & Aizenberg, J. (2009) · Science · doi:10.1126/science.1165607 · Cited by 434
Bioinspired Structural Materials
Ortiz, C., & Boyce, M. C. (2008) · Science · doi:10.1126/science.1154295 · Cited by 430
Metal films on polymer substrates stretched beyond 50%
Lu, N., Wang, X., Suo, Z., & Vlassak, J. (2007) · Applied Physics Letters · doi:10.1063/1.2817234 · Cited by 410
Does Abalone Nacre Form by Heteroepitaxial Nucleation or by Growth through Mineral Bridges?
Schäffer, T. E., Ionescu-Zanetti, C., Proksch, R., Fritz, M., Walters, D. A., Almqvist, N., Zaremba, C. M., Belcher, A. M., Smith, B. L., Stucky, G. D., et al. (1997) · Chemistry of Materials · doi:10.1021/cm960429i · Cited by 401
Jang, K.-I., Han, S. Y., Xu, S., Mathewson, K. E., Zhang, Y., Jeong, J.-W., Kim, G.-T., Webb, R. C., Lee, J. W., Dawidczyk, T. J., et al. (2014) · Nature Communications · doi:10.1038/ncomms5779 · Cited by 383
Self-citationModel for the robust mechanical behavior of nacre
Evans, A. G., Suo, Z., Wang, R. Z., Aksay, I. A., He, M. Y., & Hutchinson, J. W. (2001) · Journal of Materials Research · doi:10.1557/jmr.2001.0339 · Cited by 371
The structural performance of the periodic truss
Hutchinson, R. G., & Fleck, N. (2005) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2005.10.008 · Cited by 320
Zhang, Y., Xu, S., Fu, H., Lee, J., Su, J., Hwang, K.-C., Rogers, J. A., & Huang, Y. (2013) · Soft Matter · doi:10.1039/c3sm51360b · Cited by 307
Self-citationThe damage tolerance of elastic–brittle, two-dimensional isotropic lattices
Fleck, N. A., & Qiu, X. (2006) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2006.08.004 · Cited by 260
On optimal hierarchy of load-bearing biological materials
Zhang, Z., Zhang, Y.-W., & Gao, H. (2011) · Proceedings of the Royal Society B: Biological Sciences · doi:10.1098/rspb.2010.1093 · Cited by 259
Self-citationLow Porosity Metallic Periodic Structures with Negative Poisson's Ratio
Taylor, M., Francesconi, L., Gerendás, M., Shanian, A., Carson, C., & Bertoldi, K. (2014) · Advanced Materials · doi:10.1002/adma.201304464 · Cited by 251
Thermal transport and fire retardance properties of cellular aluminium alloys
Lu, T. J., & Chen, C. (1999) · Acta Materialia · doi:10.1016/s1359-6454(99)00037-3 · Cited by 233
Subfailure damage in ligament: a structural and cellular evaluation
Provenzano, P. P., Heisey, D., Hayashi, K., Lakes, R., & Vanderby, R. (2002) · Journal of Applied Physiology · doi:10.1152/jappl.2002.92.1.362 · Cited by 218
Hong, Y., Huber, A., Takanari, K., Amoroso, N. J., Hashizume, R., Badylak, S. F., & Wagner, W. R. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.01.025 · Cited by 217
Stretchability and compliance of freestanding serpentine-shaped ribbons
Widlund, T., Yang, S., Hsu, Y.-Y., & Lu, N. (2014) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2014.07.025 · Cited by 197
BUEHLER, M., KETEN, S., & ACKBAROW, T. (2008) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.06.002 · Cited by 194
Mechanical Principles of Biological Nanocomposites
Ji, B., & Gao, H. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104424 · Cited by 191
A hierarchical computational model for stretchable interconnects with fractal-inspired designs
Zhang, Y., Fu, H., Xu, S. H., Fan, J. A., Hwang, K.-C., Jiang, J., Rogers, J. A., & Huang, Y. Y. (2014) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2014.07.011 · Cited by 147
Self-citationFracture mechanics of protein materials
Buehler, M. J., & Ackbarow, T. (2007) · Materials Today · doi:10.1016/s1369-7021(07)70208-0 · Cited by 146
Kang, S. H., Shan, S., Košmrlj, A., Noorduin, W. L., Shian, S., Weaver, J. C., Clarke, D. R., & Bertoldi, K. (2014) · Physical Review Letters · doi:10.1103/physrevlett.112.098701 · Cited by 142
Interfacial shear strength in abalone nacre
Lin, A. Y.-M., & Meyers, M. A. (2009) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2009.04.003 · Cited by 132
Kang, S. H., Shan, S., Noorduin, W. L., Khan, M., Aizenberg, J., & Bertoldi, K. (2013) · Advanced Materials · doi:10.1002/adma.201300617 · Cited by 97
Multi-scale cohesive laws in hierarchical materials
Yao, H., & Gao, H. (2007) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2007.06.007 · Cited by 96
Non-entropic and reversible long-range deformation of an encapsulating bioelastomer
Miserez, A., Wasko, S. S., Carpenter, C. F., & Waite, J. H. (2009) · Nature Materials · doi:10.1038/nmat2547 · Cited by 96
Mechanical Properties of two novel planar lattice structures
Zhang, Y., Qiu, X., & Fang, D. (2007) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2007.10.005 · Cited by 88
Self-citationBuehler, M. J., Yao, H., Gao, H., & Ji, B. (2006) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/14/5/001 · Cited by 78
Physical characteristics of polyimide films for flexible sensors
Chang, W., Fang, T., & Lin, Y.-C. (2008) · Applied Physics A · doi:10.1007/s00339-008-4623-y · Cited by 76
Hsu, Y., González, M., Bossuyt, F., Axisa, F., Vanfleteren, J., & Wolf, I. D. (2009) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2009.0447 · Cited by 50
How do slender mineral crystals resist buckling in biological materials?
Ji, B., Gao, H., & Hsia, K. J. (2004) · Philosophical Magazine Letters · doi:10.1080/09500830512331329141 · Cited by 44
Generation of Spatially Aligned Collagen Fiber Networks Through Microtransfer Molding
Naik, N., Caves, J. M., Chaikof, E. L., & Allen, M. G. (2013) · Advanced Healthcare Materials · doi:10.1002/adhm.201300112 · Cited by 41
Cited by
Bio-Integrated Wearable Systems: A Comprehensive Review
Ray, T. R., Choi, J., Bandodkar, A. J., Krishnan, S., Gutruf, P., Tian, L., Ghaffari, R., & Rogers, J. A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00573 · Cited by 1,350
Self-citationHa, N. S., & Lu, G. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107496 · Cited by 1,175
Mechanical metamaterials and beyond
Jiao, P., Mueller, J., Raney, J. R., Zheng, X., & Alavi, A. H. (2023) · Nature Communications · doi:10.1038/s41467-023-41679-8 · Cited by 733
Large-area graphene-nanomesh/carbon-nanotube hybrid membranes for ionic and molecular nanofiltration
Yang, Y., Yang, X., Liang, L., Gao, Y., Cheng, H., Li, X., Zou, M., Ma, R., Yuan, Q., & Duan, X. (2019) · Science · doi:10.1126/science.aau5321 · Cited by 648
Self-citation3D printing of highly stretchable hydrogel with diverse UV curable polymers
Ge, Q., Chen, Z., Cheng, J., Zhang, B., Zhang, Y.-F., Li, H., He, X., Yuan, C., Liu, J., Magdassi, S., et al. (2021) · Science Advances · doi:10.1126/sciadv.aba4261 · Cited by 518
Self-citation
Metadata
- Authors
- Ma, Q., Cheng, H., Jang, K.-I., Luan, H., Hwang, K.-C., Rogers, J. A., Huang, Y., & Zhang, Y.
- Venue
- Journal of the Mechanics and Physics of Solids
- Publisher
- Elsevier BV
- Published
- 2016-05
- Volume
- 90
- Pages
- 179-202
- ISSN
- 0022-5096 (ISSN-L)
- OpenAlex
- W2292658978
- Cited by
- 309
- References
- 74
- FWCI
- 22.13
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.