The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes
Abstract
Abstract Irregular grains, high interfacial stresses and anisotropic properties widely exist in 3D-printed metallic materials, and this paper investigated the effects of heat treatment on the microstructural, mechanical and corrosion properties of 316 L stainless steel fabricated by selective laser melting. Sub-grains and low-angle boundaries exist in the as-received selective laser melted (SLMed) 316 L stainless steel. After heat treatment at 1050 °C, the sub-grains and low-angle boundaries changed slightly, and the stress state and strength decreased to some extent due to the decrease of dislocation density. After heat treatment at 1200 °C, the grains became uniform, and the dislocation cells vanished, which led to a sharp decline in the hardness and strength. However, the ductility was improved after recrystallization heat treatment. The passive film thickness and corrosion potential of the SLMed 316 L stainless steel decreased after heat treatment, and the pitting potential also decreased due to the accelerated transition from metastable to steady-state pitting; this accelerated transition was caused by the presence of weak passive films at the enlarged pores after heat treatment, especially for an adequate solid solution treatment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
Additively manufactured hierarchical stainless steels with high strength and ductility
Wang, Y. M., Voisin, T., McKeown, J. T., Ye, J., Calta, N. P., Li, Z., Zeng, Z., Zhang, Y., Chen, W., Roehling, T. T., et al. (2018) · Nature Materials · doi:10.1038/nmat5021 · Cited by 2,613
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
The cost of corrosion in China
Hou, B., Li, X., Ma, X., Du, C., Zhang, D., Zheng, M., Xu, W., Lu, D., & Ma, F. (2017) · npj Materials Degradation · doi:10.1038/s41529-017-0005-2 · Cited by 1,236
Self-citationDislocation network in additive manufactured steel breaks strength–ductility trade-off
Liu, L., Ding, Q., Zhong, Y., Zou, J., Wu, J., Chiu, Y.-L., Li, J., Zhang, Z., Yu, Q., & Shen, Z. (2018) · Materials Today · doi:10.1016/j.mattod.2017.11.004 · Cited by 1,127
Gorsse, S., Hutchinson, C., Gouné, M., & Banerjee, R. (2017) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2017.1361305 · Cited by 920
Jia, Q., & Gu, D. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.09.171 · Cited by 905
Materials science: Share corrosion data
Li, X., Zhang, D., Liu, Z., Li, Z., Du, C., & Dong, C. (2015) · Nature · doi:10.1038/527441a · Cited by 871
Self-citationHardened austenite steel with columnar sub-grain structure formed by laser melting
Saeidi, K., Gao, X., Zhong, Y., & Shen, Z. J. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.12.018 · Cited by 796
Van Bael, S., Chai, Y. C., Truscello, S., Moesen, M., Kerckhofs, G., Van Oosterwyck, H., Kruth, J.-P., & Schrooten, J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.001 · Cited by 766
Cherry, J. A., Davies, H. M., Mehmood, S., Lavery, N. P., Brown, S. G. R., & Sienz, J. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6297-2 · Cited by 755
Surface texture metrology for metal additive manufacturing: a review
Townsend, A., Senin, N., Blunt, L., Leach, R. K., & Taylor, J. S. (2016) · Precision Engineering · doi:10.1016/j.precisioneng.2016.06.001 · Cited by 743
Shipley, H., McDonnell, D., Culleton, M., Coull, R., Lupoi, R., O’Donnell, G. E., & Trimble, D. (2018) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2018.01.003 · Cited by 643
Liu, Y. J., Li, S. J., Wang, H. L., Hou, W. T., Hao, Y. L., Yang, R., Sercombe, T. B., & Zhang, L. C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.04.029 · Cited by 584
Self-citationZiętala, M., Durejko, T., Polański, M., Kunce, I., Płociński, T., Zieliński, W., Łazińska, M., Stępniowski, W. J., Czujko, T., Kurzydłowski, K. J., et al. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.09.028 · Cited by 523
Texture control during laser deposition of nickel-based superalloy
Dinda, G. P., Dasgupta, A. K., & Mazumder, J. (2012) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.06.014 · Cited by 471
Luo, H., Dong, C., Li, X., & Xiao, K. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.01.025 · Cited by 462
Self-citationFeng, Z., Cheng, X., Dong, C., Xu, L. H., & Li, X. (2010) · Corrosion Science · doi:10.1016/j.corsci.2010.07.013 · Cited by 455
Self-citationSander, G., Thomas, S., Cruz, V., Jurg, M., Birbilis, N., Gao, X., Brameld, M., & Hutchinson, C. R. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0551706jes · Cited by 398
On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel
Chao, Q., Cruz, V., Thomas, S., Birbilis, N., Collins, P., Taylor, A., Hodgson, P. D., & Fabijanic, D. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.07.037 · Cited by 387
Vilaro, T., Colin, C., Bartout, J. D., Nazé, L., & Sennour, M. (2012) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.11.092 · Cited by 381
Sutton, A. T., Kriewall, C. S., Leu, M. C., & Newkirk, J. W. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1250605 · Cited by 354
Characterization of nano-scale oxides in austenitic stainless steel processed by powder bed fusion
Yan, F., Xiong, W., Faierson, E., & Olson, G. B. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.06.011 · Cited by 351
Röttger, A., Geenen, K., Windmann, M., Binner, F., & Theisen, W. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.10.012 · Cited by 310
Fattah‐alhosseini, A., Golozar, M. A., Saatchi, A., & RAEISSI, K. (2009) · Corrosion Science · doi:10.1016/j.corsci.2009.09.003 · Cited by 287
Zheng, S., Li, C., Qi, Y., et al. (2012) · Corrosion Science · doi:10.1016/j.corsci.2012.09.044 · Cited by 272
Property evaluation of 304L stainless steel fabricated by selective laser melting
Abd‐Elghany, K., & Bourell, D. L. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211250418 · Cited by 187
Lou, X., Song, M., Emigh, P. W., Othon, M. A., & Andresen, P. L. (2017) · Corrosion Science · doi:10.1016/j.corsci.2017.09.017 · Cited by 174
Corrosion Properties of Powder Bed Fusion Additively Manufactured 17-4 PH Stainless Steel
Schaller, R. F., Taylor, J. M., Rodelas, J., & Schindelholz, E. J. (2017) · CORROSION · doi:10.5006/2365 · Cited by 146
Kong, D., Ni, X., Dong, C., Zhang, L., Man, C., Cheng, X., & Li, X. (2018) · Materials Letters · doi:10.1016/j.matlet.2018.09.152 · Cited by 135
Self-citationJerrard, P. G. E., Hao, L., & Evans, K. E. (2009) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/09544054jem1574 · Cited by 54
Cited by
Voisin, T., Forien, J.-B., Perron, A., Aubry, S., Bertin, N., Samanta, A., Baker, A., & Wang, Y. M. (2021) · Acta Materialia · doi:10.1016/j.actamat.2020.11.018 · Cited by 623
Additive manufacturing of steels: a review of achievements and challenges
Haghdadi, N., Laleh, M., Moyle, M., & Primig, S. (2021) · Journal of Materials Science · doi:10.1007/s10853-020-05109-0 · Cited by 622
“[104] Kong D, Dong C, Ni X, Zhang L, Yao J, Man C, Cheng X, Xiao K, Li X (2019) Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after”
BackgroundAn overview of modern metal additive manufacturing technology
Armstrong, M., Mehrabi, H., & Naveed, N. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.10.060 · Cited by 549
Heat treatment for metal additive manufacturing
Laleh, M., Sadeghi, E., Revilla, R. I., Chao, Q., Haghdadi, N., Hughes, A. E., Xu, W., De Graeve, I., Qian, M., Gibson, I., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101051 · Cited by 538
About metastable cellular structure in additively manufactured austenitic stainless steels
Kong, D., Dong, C., Wei, S., Ni, X., Zhang, L., Li, R., Wang, L., Man, C., & Li, X. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101804 · Cited by 528
Self-citation
Metadata
- Authors
- Kong, D., Dong, C., Ni, X., Zhang, L., Yao, J., Man, C., Cheng, X., Xiao, K., & Li, X.
- Venue
- Journal of Materials Science & Technology
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 35
- Issue
- 7
- Pages
- 1499-1507
- ISSN
- 1005-0302 (ISSN-L)
- OpenAlex
- W2920272106
- Cited by
- 471
- References
- 33
- FWCI
- 26.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.