The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Antibacterial surface design of biomedical titanium materials for orthopedic applications
Abstract
Abstract Titanium (Ti) and titanium alloys have become widely used as biomedical materials in orthopedics because of their good machinability, corrosion resistance, low elastic modulus and excellent biocompatibility. However, when Ti-based implants are used for bone repair and replacement, they are easy to cause bacteria adhesion and aggregation, which leads to postoperative infection. In addition, Ti and its alloys, as bio-inert materials, cannot induce desirable tissue responses such as osseointegration after implantation, which will eventually lead to implant loosening. Postoperative bacterial infection and lack of osseointegration directly lead to the failure of implantation surgery and are not conductive to the long-term service of titanium-based implants. Recently, researchers have made many attempts to focus on the surface modification of multifunctional Ti-based implants to endow them with both antibacterial activity and simultaneous osteoinductive property. In this review, we primarily highlighted the recent progresses in the surface design of Ti implants with both antimicrobial and osteoinductive properties for orthopedic applications. First, the challenges for treating implant-associated infections were briefly introduced such as the emergence of antibiotic resistance, the formation of biofilms, and the construction of cell-selective surfaces. Some of the essential fundamentals were concisely introduced to address these emerging challenges. Next, we intended to elaborate the potential strategies of multifunctional surface design to endow good osseointegration for antibacterial Ti implants and highlighted the recent advances of the implants. We hope that this review will provide theoretical basis and technical support for the development of new Ti implant with antibacterial and osteogenic functions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mussel-inspired surface chemistry for multifunctional coatings
Lee, H., Dellatore, S. M., Miller, W. M., & Messersmith, P. B. (2007) · Science · doi:10.1126/science.1147241 · Cited by 10,965
Antimicrobial peptides of multicellular organisms
Zasloff, M. (2002) · Nature · doi:10.1038/415389a · Cited by 8,457
Antimicrobial peptides: pore formers or metabolic inhibitors in bacteria?
Brogden, K. A. (2005) · Nature Reviews Microbiology · doi:10.1038/nrmicro1098 · Cited by 5,829
Liu, Y., Ai, K., & Lu, L. (2014) · Chemical Reviews · doi:10.1021/cr400407a · Cited by 4,794
The crisis in antibiotic resistance
Neu, H. C. (1992) · Science · doi:10.1126/science.257.5073.1064 · Cited by 2,834
Exploring and Engineering the Cell Surface Interface
Stevens, M. M., & George, J. H. (2005) · Science · doi:10.1126/science.1106587 · Cited by 2,607
Biological Responses to Materials
Anderson, J. M. (2001) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.31.1.81 · Cited by 1,465
Ribosome-targeting antibiotics and mechanisms of bacterial resistance
Wilson, D. N. (2014) · Nature Reviews Microbiology · doi:10.1038/nrmicro3155 · Cited by 1,054
Nanotechnology-based antimicrobials and delivery systems for biofilm-infection control
Liu, Y., Shi, L., Su, L., van der Mei, H. C., Jutte, P. C., Ren, Y., & Busscher, H. J. (2019) · Chemical Society Reviews · doi:10.1039/c7cs00807d · Cited by 737
Natural Products as Platforms To Overcome Antibiotic Resistance
Rossiter, S. E., Fletcher, M. H., & Wuest, W. M. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00283 · Cited by 622
Cited by
Bacterial anti-adhesion surface design: Surface patterning, roughness and wettability: A review
Yang, K., Shi, J., Wang, L., Chen, Y., Liang, C., Yang, L., & Wang, L.-N. (2022) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2021.05.028 · Cited by 330
Recent advances in regenerative biomaterials
Cao, D., & Ding, J. (2022) · Regenerative Biomaterials · doi:10.1093/rb/rbac098 · Cited by 259
Superhydrophobic photothermal coatings based on candle soot for prevention of biofilm formation
Lin, Y., Zhang, H., Zou, Y., Lu, K., Li, L., Wu, Y., Cheng, J., Zhang, Y., Chen, H., & Yu, Q. (2023) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.06.005 · Cited by 98
Metadata
- Authors
- Yuan, Z., He, Y., Lin, C., Liu, P., & Cai, K.
- Venue
- Journal of Materials Science & Technology
- Publisher
- Elsevier BV
- Published
- 2021-07
- Volume
- 78
- Pages
- 51-67
- ISSN
- 1005-0302 (ISSN-L)
- OpenAlex
- W3109482165
- Cited by
- 165
- References
- 12
- FWCI
- 6.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Antibacterial surface design of biomedical titanium materials for orthopedic applications. https://app.cochat.ai/papers/10.1016/j.jmst.2020.10.066
- The paper
- Yuan, Z., He, Y., Lin, C., Liu, P., & Cai, K. (2021). Antibacterial surface design of biomedical titanium materials for orthopedic applications. Journal of Materials Science & Technology. https://doi.org/10.1016/j.jmst.2020.10.066
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.