The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
A review on wire arc additive manufacturing: Monitoring, control and a framework of automated system
Open accessAbstract
Abstract Wire arc additive manufacturing technology (WAAM) has become a very promising alternative to high-value large metal components in many manufacturing industries. Due to its long process cycle time and arc-based deposition, defect monitoring, process stability and control are critical for the WAAM system to be used in the industry. Although major progress has been made in process development, path slicing and programming, and material analysis, a comprehensive process monitoring, and control system are yet to be developed. This paper aims to provide an in-depth review of sensing and control design suitable for a WAAM system, including technologies developed for the generic Arc Welding process, the Wire Arc Additive Manufacturing process and laser Additive Manufacturing. Particular focus is given to the integration of sensor-based feedback control, and how they could be implemented into the WAAM process to improve its accuracy, reliability, and efficiency. The paper concludes by proposing a framework for sensor-based monitoring and control system for the GMAW based WAAM process. This framework provides a blueprint for the monitoring and control strategies during the WAAM process and aims to identify and reduce defects using information fusion techniques.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reinforcement Learning: A Survey
Kaelbling, L. P., Littman, M. L., & Moore, A. W. (1996) · Journal of Artificial Intelligence Research · doi:10.1613/jair.301 · Cited by 8,972
Ding, D., Pan, Z., Cuiuri, D., & Li, H. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7077-3 · Cited by 1,648
Self-citationWu, B., Pan, Z., Ding, D., Cuiuri, D., Li, H., Xu, J., & Norrish, J. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.08.001 · Cited by 1,577
Self-citationThe Role of Additive Manufacturing in the Era of Industry 4.0
Dilberoglu, U. M., Gharehpapagh, B., Yaman, U., & Dolen, M. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.148 · Cited by 1,000
2013 American Control Conference
(2013) · doi:10.1109/acc31500.2013 · Cited by 979
Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V
Wang, F., Williams, S., Colegrove, P., & Antonysamy, A. A. (2013) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-012-1444-6 · Cited by 737
Metal additive manufacturing in the commercial aviation industry: A review
Gisario, A., Kazarian, M., Martina, F., & Mehrpouya, M. (2019) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.08.005 · Cited by 574
Denlinger, E. R., Heigel, J. C., Michaleris, P., & Palmer, T. A. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.07.030 · Cited by 531
Gobert, C., Reutzel, E. W., Petrich, J., Nassar, A. R., & Phoha, S. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.005 · Cited by 447
Clijsters, S., Craeghs, T., Buls, S., Kempen, K., & Kruth, J.-P. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6214-8 · Cited by 437
Intelligent welding system technologies: State-of-the-art review and perspectives
Wang, B., Hu, S. J., Sun, L., & Freiheit, T. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.06.020 · Cited by 425
Additive Manufacturing Applications in Industry 4.0: A Review
Haleem, A., & Javaid, M. (2019) · Journal of Industrial Integration and Management · doi:10.1142/s2424862219300011 · Cited by 412
Shevchik, S. A., Kenel, C., Leinenbach, C., & Wasmer, K. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.012 · Cited by 403
Zhang, Y., Hong, G. S., Ye, D., Zhu, K., & Fuh, J. Y. H. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.07.002 · Cited by 335
Self-citationSensing, modeling and control for laser-based additive manufacturing
Hu, D., & Kovacevic, R. (2003) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(02)00163-3 · Cited by 329
Xiong, J., Zhang, G., Hu, J., & Wu, L. (2014) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-012-0682-1 · Cited by 324
Criales, L. E., Arısoy, Y. M., Lane, B., Moylan, S., Donmez, A., & Özel, T. (2017) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2017.03.004 · Cited by 309
Control of melt pool temperature and deposition height during direct metal deposition process
Song, L., Bagavath-Singh, V., Dutta, B., & Mazumder, J. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3395-2 · Cited by 283
Khanzadeh, M., Chowdhury, S., Tschopp, M. A., Doude, H. R., Marufuzzaman, M., & Bian, L. (2019) · IISE Transactions · doi:10.1080/24725854.2017.1417656 · Cited by 278
Defect detection in selective laser melting technology by acoustic signals with deep belief networks
Ye, D., Hong, G. S., Zhang, Y., Zhu, K., & Fuh, J. Y. H. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-1728-0 · Cited by 261
Self-citationHeight control of laser metal-wire deposition based on iterative learning control and 3D scanning
Heralić, A., Christiansson, A.-K., & Lennartson, B. (2012) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2012.03.016 · Cited by 252
Mani, M., Lane, B., Donmez, A., Feng, S., Moylan, S., & Fesperman, R. (2015) · doi:10.6028/nist.ir.8036 · Cited by 242
Grasso, M., Demir, A. G., Previtali, B., & Colosimo, B. M. (2018) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2017.07.001 · Cited by 231
Ding, D., Shen, C., Pan, Z. S., Cuiuri, D., Li, H., Larkin, N., & van Duin, S. (2016) · Computer-Aided Design · doi:10.1016/j.cad.2015.12.003 · Cited by 212
Self-citationOn the use of spatter signature for in-situ monitoring of Laser Powder Bed Fusion
Repossini, G., Laguzza, V., Grasso, M., & Colosimo, B. M. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.05.004 · Cited by 206
Arc Welding Processes for Additive Manufacturing: A Review
Pan, Z., Ding, D., Wu, B., Cuiuri, D., Li, H., & Norrish, J. (2018) · Transactions on Intelligent Welding Manufacturing · doi:10.1007/978-981-10-5355-9_1 · Cited by 205
Self-citationMani, M., Feng, S., Brandon, L., Donmez, A., Moylan, S., & Fesperman, R. (2017) · Additive Manufacturing Handbook · doi:10.1201/9781315119106-34 · Cited by 181
Xiong, J., Yin, Z., & Zhang, W. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.02.021 · Cited by 170
Model-Based Predictive Control of Weld Penetration in Gas Tungsten Arc Welding
Liu, Y. K., & Zhang, Y. M. (2013) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2013.2266662 · Cited by 161
Self-citationReal-time control of microstructure in laser additive manufacturing
Farshidianfar, M. H., Khajepour, A., & Gerlich, A. P. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7423-5 · Cited by 159
Mirapeix, J. M., Garcia-Allende, P. B., Cobo, A., Conde, O. M., & Higuera, J. M. L. (2007) · NDT & E International · doi:10.1016/j.ndteint.2006.12.001 · Cited by 156
Xiong, J., Zhang, G., Qiu, Z., & Li, Y. (2012) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.10.009 · Cited by 153
Melt pool temperature control using LabVIEW in Nd:YAG laser blown powder cladding process
Salehi, D., & Brandt, M. (2005) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-005-2514-3 · Cited by 153
Characterization of the process control for the direct laser metallic powder deposition
Bi, G., Gasser, A., Wissenbach, K., Drenker, A., & Poprawe, R. (2006) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2006.05.006 · Cited by 152
Thermography for Monitoring the Selective Laser Melting Process
Krauss, H., Eschey, C., & Zaeh, M. F. (2012) · doi:10.26153/tsw/15406 · Cited by 149
Increased stability in laser metal wire deposition through feedback from optical measurements
Heralić, A., Christiansson, A., Ottosson, M., & Lennartson, B. (2009) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2009.08.012 · Cited by 139
Use of Machine Learning Algorithms for Weld Quality Monitoring using Acoustic Signature
Sumesh, A., Rameshkumar, K., N, M. K., & Babu, R. S. (2015) · Procedia Computer Science · doi:10.1016/j.procs.2015.04.042 · Cited by 129
Tang, L. X., & Landers, R. G. (2010) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4000882 · Cited by 128
Defects monitoring of laser metal deposition using acoustic emission sensor
Gaja, H., & Liou, F. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9366-x · Cited by 123
Nguyen, L., Buhl, J., & Bambach, M. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101265 · Cited by 108
Wang, F., Mao, H., Zhang, D., Zhao, X., & Shen, Y. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2008.09.039 · Cited by 104
Doumanidis, C. C., & Kwak, Y.-M. (2002) · International Journal of Pressure Vessels and Piping · doi:10.1016/s0308-0161(02)00024-8 · Cited by 96
Analysis and correction of defects within parts fabricated using powder bed fusion technology
Mireles, J., Ridwan, S., Morton, P. A., Hinojos, A., & Wicker, R. B. (2015) · Surface Topography Metrology and Properties · doi:10.1088/2051-672x/3/3/034002 · Cited by 94
Li, F., Chen, S., Wu, Z., & Yan, Z. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-1590-0 · Cited by 88
Self-citationStudy on Shrinkage Behaviour of Direct Laser Sintering Metallic Powder
Zhu, H. H., Lü, L., & Fuh, J. Y. H. (2006) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/095440505x32995 · Cited by 87
Saad, E., Wang, H., & Kovacevic, R. (2006) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2005.03.020 · Cited by 86
Acoustic emission method for defect detection and identification in carbon steel welded joints
Droubi, M. G., Faisal, N. H., Orr, F., Steel, J. A., & El-Shaib, M. (2017) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2017.03.012 · Cited by 85
Porosity of additive manufacturing parts for process monitoring
Slotwinski, J. A., & Garboczi, E. J. (2014) · AIP conference proceedings · doi:10.1063/1.4864957 · Cited by 64
Tang, L. X., & Landers, R. G. (2010) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4000883 · Cited by 62
Wang, Y., Zhang, C., Lu, J., Bai, L., Zhao, Z., & Han, J. (2020) · IEEE Access · doi:10.1109/access.2020.2986130 · Cited by 54
Height Control in Laser Cladding Using Adaptive Sliding Mode Technique: Theory and Experiment
Ƶeinali, M., & Khajepour, A. (2010) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4002023 · Cited by 51
Development of an adaptive, self-learning control concept for an additive manufacturing process
Renken, V., Albinger, S., Goch, G., Neef, A., & Emmelmann, C. (2017) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2017.05.002 · Cited by 48
Vision-based clad height measurement
Davis, T. A., & Shin, Y. C. (2010) · Machine Vision and Applications · doi:10.1007/s00138-009-0240-9 · Cited by 46
Cited by
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Alami, A. H., Ghani Olabi, A., Alashkar, A., Alasad, S., Aljaghoub, H., Rezk, H., & Abdelkareem, M. A. (2023) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2023.102516 · Cited by 349
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.10.024 · Cited by 343
The Current State of Research of Wire Arc Additive Manufacturing (WAAM): A Review
Treutler, K., & Wesling, V. (2021) · Applied Sciences · doi:10.3390/app11188619 · Cited by 293
Xia, C., Pan, Z., Polden, J., Li, H., Xu, Y., & Chen, S. (2022) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-020-01725-4 · Cited by 256
Self-citation
Metadata
- Authors
- Xia, C., Pan, Z., Polden, J., Li, H., Xu, Y., Chen, S., & Zhang, Y.
- Venue
- Journal of Manufacturing Systems
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 57
- Pages
- 31-45
- ISSN
- 0278-6125 (ISSN-L)
- OpenAlex
- W3048977620
- Cited by
- 460
- References
- 53
- FWCI
- 24.00
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.