The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Critical Parameters for Evaluating Coin Cells and Pouch Cells of Rechargeable Li-Metal Batteries
Open accessAbstract
Summary Lithium (Li)-metal batteries have regained broad interest in the battery research community. Although many studies on Li anode have been published in recent years, it is difficult to evaluate and compare these advances for practical applications. A key challenge is a gap between materials and component properties and the achievable large-format cell-level performance. In this paper, we investigate the critical experimental parameters that determine the cycle number of coin cells to understand the performance variations reported in the literature. To define the range of cell parameters, we exemplify a representative Li-metal pouch cell with specific energy of 300 Wh/kg to provide an effective validation of electrode materials and accurate cell performance evaluations. Based on the pouch-cell-level requirements, we propose a set of coin-cell parameters and testing conditions to expedite the discovery of new materials and their full integration into realistic battery systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
High-power all-solid-state batteries using sulfide superionic conductors
Kato, Y., Hori, S., Saito, T., Suzuki, K., Hirayama, M., Mitsui, A., Yonemura, M., Iba, H., & Kanno, R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.30 · Cited by 3,517
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Self-citationDendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Self-citationAlbertus, P., Babinec, S., Litzelman, S., & Newman, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0047-2 · Cited by 1,888
An Outlook on Lithium Ion Battery Technology
Manthiram, A. (2017) · ACS Central Science · doi:10.1021/acscentsci.7b00288 · Cited by 1,771
Aurbach, D. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00080-2 · Cited by 1,697
Advancing Lithium Metal Batteries
Liu, B., Zhang, J.-G., & Xu, W. (2018) · Joule · doi:10.1016/j.joule.2018.03.008 · Cited by 1,647
Self-citationAccurate Determination of Coulombic Efficiency for Lithium Metal Anodes and Lithium Metal Batteries
Adams, B. D., Zheng, J., Ren, X., Xu, W., & Zhang, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702097 · Cited by 1,499
Self-citationHigh‐Voltage Lithium‐Metal Batteries Enabled by Localized High‐Concentration Electrolytes
Chen, S., Zheng, J., Mei, D., Han, K. S., Engelhard, M. H., Zhao, W., Xu, W., Liu, J., & Zhang, J. (2018) · Advanced Materials · doi:10.1002/adma.201706102 · Cited by 1,328
Self-citationUltimate Limits to Intercalation Reactions for Lithium Batteries
Whittingham, M. S. (2014) · Chemical Reviews · doi:10.1021/cr5003003 · Cited by 1,130
Self-citationAn improved high-performance lithium–air battery
Jung, H.-G., Hassoun, J., Park, J.-B., Sun, Y.-K., & Scrosati, B. (2012) · Nature Chemistry · doi:10.1038/nchem.1376 · Cited by 1,089
Wood, K. N., Kazyak, E., Chadwick, A. F., Chen, K.-H., Zhang, J.-G., Thornton, K., & Dasgupta, N. P. (2016) · ACS Central Science · doi:10.1021/acscentsci.6b00260 · Cited by 900
Self-citationChen, R., Qu, W., Guo, X., Li, L., & Wu, F. (2016) · Materials Horizons · doi:10.1039/c6mh00218h · Cited by 797
Failure Mechanism for Fast‐Charged Lithium Metal Batteries with Liquid Electrolytes
Lu, D., Shao, Y., Lozano, T., Bennett, W. D., Graff, G. L., Polzin, B., Zhang, J., Engelhard, M. H., Saenz, N. T., Henderson, W. A., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400993 · Cited by 740
Self-citationReview—Li-Rich Layered Oxide Cathodes for Next-Generation Li-Ion Batteries: Chances and Challenges
Rozier, P., & Tarascon, J. M. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0111514jes · Cited by 695
Radin, M. D., Hy, S., Sina, M., Fang, C., Liu, H., Vinckeviciute, J., Zhang, M., Whittingham, M. S., Meng, Y. S., & Van der Ven, A. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602888 · Cited by 677
Self-citationOptimizing Areal Capacities through Understanding the Limitations of Lithium-Ion Electrodes
Gallagher, K. G., Trask, S. E., Bauer, C., Woehrle, T., Lux, S. F., Tschech, M., Lamp, P., Polzin, B. J., Ha, S., Long, B., et al. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0321602jes · Cited by 646
Hagen, M., Hanselmann, D., Ahlbrecht, K., Maça, R., Gerber, D., & Tübke, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401986 · Cited by 636
Semi‐Solid Lithium Rechargeable Flow Battery
Duduta, M., Ho, B., Wood, V. C., Limthongkul, P., Brunini, V. E., Carter, W. C., & Chiang, Y. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100152 · Cited by 617
Aurbach, D., Zaban, A., Ein-Eli, Y., Weissman, I., Chusid, O., Markovsky, B., Levi, M., Levi, E., Schechter, A., & Granot, E. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(97)02575-5 · Cited by 502
Markevich, E., Salitra, G., Chesneau, F., Schmidt, M., & Aurbach, D. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00300 · Cited by 453
High Voltage Operation of Ni‐Rich NMC Cathodes Enabled by Stable Electrode/Electrolyte Interphases
Zhao, W., Zheng, J., Zou, L., Jia, H., Liu, B., Wang, H., Engelhard, M. H., Wang, C., Xu, W., Yang, Y., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800297 · Cited by 389
Self-citationDendrite-Free Lithium Deposition with Self-Aligned Nanorod Structure
Zhang, Y., Qian, J., Xu, W., Russell, S. M., Chen, X., Nasybulin, E., Bhattacharya, P., Engelhard, M. H., Mei, D., Cao, R., et al. (2014) · Nano Letters · doi:10.1021/nl5039117 · Cited by 365
Self-citationZhao, Y., Wang, L., & Byon, H. R. (2013) · Nature Communications · doi:10.1038/ncomms2907 · Cited by 278
Problem, Status, and Possible Solutions for Lithium Metal Anode of Rechargeable Batteries
Zhang, S. S. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00055 · Cited by 162
Cited by
Rechargeable Batteries for Grid Scale Energy Storage
Zhu, Z., Jiang, T., Ali, M., Meng, Y., Jin, Y., Cui, Y., & Chen, W. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00289 · Cited by 1,769
Mitigating Thermal Runaway of Lithium-Ion Batteries
Feng, X., Ren, D., He, X., & Ouyang, M. (2020) · Joule · doi:10.1016/j.joule.2020.02.010 · Cited by 1,735
High‐Energy Lithium‐Ion Batteries: Recent Progress and a Promising Future in Applications
Xu, J., Cai, X., Cai, S., Shao, Y., Hu, C., Lu, S., & Ding, S. (2023) · ENERGY & ENVIRONMENTAL MATERIALS · doi:10.1002/eem2.12450 · Cited by 1,201
Dendrites in Zn‐Based Batteries
Yang, Q., Li, Q., Liu, Z., Wang, D., Guo, Y., Li, X., Tang, Y., Li, H., Dong, B., & Zhi, C. (2020) · Advanced Materials · doi:10.1002/adma.202001854 · Cited by 1,181
Self-citationUnderstanding and applying coulombic efficiency in lithium metal batteries
Xiao, J., Li, Q., Bi, Y., Cai, M., Dunn, B., Glossmann, T., Liu, J., Osaka, T., Sugiura, R., Wu, B., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0648-z · Cited by 1,053
Self-citation
Metadata
- Authors
- Chen, S., Niu, C., Lee, H., Li, Q., Yu, L., Xu, W., Zhang, J.-G., Dufek, E. J., Whittingham, M. S., Meng, S., Xiao, J., & Liu, J.
- Venue
- Joule
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 3
- Issue
- 4
- Pages
- 1094-1105
- ISSN
- 2542-4351 (ISSN-L)
- OpenAlex
- W2916955754
- Cited by
- 531
- References
- 28
- FWCI
- 22.91
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.