The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
A Thermal Management Strategy for Electronic Devices Based on Moisture Sorption-Desorption Processes
Open accessAbstract
Summary Currently, the thermal management of electronics has been drawing growing attention. The use of latent heat emerges as an attractive means for intermittent heat dissipation. However, traditional phase change materials (PCMs) are limited by their relatively low enthalpies. In this paper, we demonstrate a passive thermal management strategy through the desorption process of water inside sorbents. The spontaneous adsorption enables self-recovery of working capacity at rest mode. The basic guideline for selecting proper sorbents is outlined. In the proof-of-concept test, we coated MIL-101(Cr) powders onto metallic substrates. The coating of 0.288 g achieved a temperature drop (maximum 8.6°C) for 25 min at a heating power of 1.5 W. The equivalent enthalpy of the coating can be up to 1,950 J/gcoating, indicating a significant improvement compared to that of traditional PCMs. Our results suggest that this strategy could find promising applications in a variety of practical scenes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal–Organic Frameworks for Separations
Li, J.-R., Sculley, J., & Zhou, H.-C. (2012) · Chemical Reviews · doi:10.1021/cr200190s · Cited by 6,323
A Chromium Terephthalate-Based Solid with Unusually Large Pore Volumes and Surface Area
Férey, G., Mellot-Draznieks, C., Serre, C., Millange, F., Dutour, J., Surblé, S., & Margiolaki, I. (2005) · Science · doi:10.1126/science.1116275 · Cited by 5,430
Hydrogen Storage in Microporous Metal-Organic Frameworks
Rosi, N. L., Eckert, J., Eddaoudi, M., Vodak, D. T., Kim, J., O'Keeffe, M., & Yaghi, O. M. (2003) · Science · doi:10.1126/science.1083440 · Cited by 4,846
Water Adsorption in Porous Metal–Organic Frameworks and Related Materials
Furukawa, H., Gándara, F., Zhang, Y.-B., Jiang, J., Queen, W. L., Hudson, M. R., & Yaghi, O. M. (2014) · Journal of the American Chemical Society · doi:10.1021/ja500330a · Cited by 2,888
Fujita, M., Kwon, Y. J., Washizu, S., & Ogura, K. (1994) · Journal of the American Chemical Society · doi:10.1021/ja00082a055 · Cited by 2,374
Emerging challenges and materials for thermal management of electronics
Moore, A. L., & Shi, L. (2014) · Materials Today · doi:10.1016/j.mattod.2014.04.003 · Cited by 2,106
Kaye, S. S., Dailly, A., Yaghi, O. M., & Long, J. R. (2007) · Journal of the American Chemical Society · doi:10.1021/ja076877g · Cited by 1,660
Water adsorption in MOFs: fundamentals and applications
Canivet, J., Fateeva, A., Guo, Y., Coasne, B., & Farrusseng, D. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00078a · Cited by 1,444
Mesoporous metal–organic framework materials
Xuan, W., Zhu, C., Liu, Y., & Cui, Y. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15196g · Cited by 933
Metal–Organic Frameworks for Water Harvesting from Air
Kalmutzki, M. J., Diercks, C. S., & Yaghi, O. M. (2018) · Advanced Materials · doi:10.1002/adma.201704304 · Cited by 772
Progress and Expectation of Atmospheric Water Harvesting
Tu, Y., Wang, R., Zhang, Y., & Wang, J. (2018) · Joule · doi:10.1016/j.joule.2018.07.015 · Cited by 762
Self-citationNanoconfined phase change materials for thermal energy applications
Aftab, W., Huang, X., Wu, W., Liang, Z., Mahmood, A., & Zou, R. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03587j · Cited by 647
Rapid Cycling and Exceptional Yield in a Metal-Organic Framework Water Harvester
Hanikel, N., Prévot, M. S., Fathieh, F., Kapustin, E. A., Lyu, H., Wang, H., Diercks, N. J., Glover, T. G., & Yaghi, O. M. (2019) · ACS Central Science · doi:10.1021/acscentsci.9b00745 · Cited by 620
Ling, Z., Zhang, Z., Shi, G., Fang, X., Wang, L., Gao, X., Fang, Y., Xu, T., Wang, S., & Liu, X. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.017 · Cited by 558
Multifunctional Energy Storage and Conversion Devices
Huang, Y., Zhu, M., Huang, Y., Pei, Z., Li, H., Wang, Z., Xue, Q., & Zhi, C. (2016) · Advanced Materials · doi:10.1002/adma.201601928 · Cited by 544
Bachman, J. E., Smith, Z. P., Li, T., Xu, T., & Long, J. R. (2016) · Nature Materials · doi:10.1038/nmat4621 · Cited by 504
MIL-100(Al, Fe) as water adsorbents for heat transformation purposes—a promising application
Jeremias, F., Khutia, A., Henninger, S. K., & Janiak, C. (2011) · Journal of Materials Chemistry · doi:10.1039/c2jm15615f · Cited by 440
Effect of carbon nanofiber additives on thermal behavior of phase change materials
Elgafy, A., & Lafdi, K. (2005) · Carbon · doi:10.1016/j.carbon.2005.06.042 · Cited by 430
Thermal conductivity enhancement of energy storage media using carbon fibers
Fukai, J., Kanou, M., Kodama, Y., & Miyatake, O. (2000) · Energy Conversion and Management · doi:10.1016/s0196-8904(99)00166-1 · Cited by 395
Rieth, A. J., Yang, S., Wang, E. N., et al. (2017) · ACS Central Science · doi:10.1021/acscentsci.7b00186 · Cited by 390
Emerging Applications of Phase‐Change Materials (PCMs): Teaching an Old Dog New Tricks
Hyun, D. C., Levinson, N. S., Jeong, U., & Xia, Y. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201305201 · Cited by 363
MOF catalysis in relation to their homogeneous counterparts and conventional solid catalysts
García-García, P., Müller, M., & Corma, A. (2014) · Chemical Science · doi:10.1039/c4sc00265b · Cited by 355
Baby, R., & Balaji, C. (2012) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.11.020 · Cited by 326
Recent Progress of Self‐Powered Sensing Systems for Wearable Electronics
Lou, Z., Li, L., Wang, L., & Shen, G. (2017) · Small · doi:10.1002/smll.201701791 · Cited by 309
Heat pipe with PCM for electronic cooling
Weng, Y.-C., Cho, H.-P., Chang, C.-C., & Chen, S.-L. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.12.004 · Cited by 291
Water Sorption Cycle Measurements on Functionalized MIL-101Cr for Heat Transformation Application
Khutia, A., Rammelberg, H. U., Schmidt, T., Henninger, S., & Janiak, C. (2013) · Chemistry of Materials · doi:10.1021/cm304055k · Cited by 275
Hao, M., Li, J., Park, S., Moura, S., & Dames, C. (2018) · Nature Energy · doi:10.1038/s41560-018-0243-8 · Cited by 274
Water harvesting from air with a hygroscopic salt in a hydrogel–derived matrix
Kallenberger, P. A., & Fröba, M. (2018) · Communications Chemistry · doi:10.1038/s42004-018-0028-9 · Cited by 262
Surface diffusion in porous media: A critical review
Medveď, I., & Černý, R. (2011) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2011.01.015 · Cited by 220
Wu, W., Zhang, G., Ke, X., Yang, X., Wang, Z., & Liu, C. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.05.050 · Cited by 199
Multicycle water vapour stability of microporous breathing MOF aluminium isophthalate CAU-10-H
Fröhlich, D., Henninger, S. K., & Janiak, C. (2014) · Dalton Trans. · doi:10.1039/c4dt02264e · Cited by 177
Thermoresponsive Polymer Induced Sweating Surfaces as an Efficient Way to Passively Cool Buildings
Rotzetter, A. C. C., Schumacher, C. M., Bubenhofer, S. B., Grass, R. N., Gerber, L. C., Zeltner, M., & Stark, W. J. (2012) · Advanced Materials · doi:10.1002/adma.201202574 · Cited by 176
Jing, J.-H., Wu, H.-Y., Shao, Y.-W., Qi, X.-D., Yang, J.-H., & Wang, Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b06198 · Cited by 167
Composite Salt in Porous Metal‐Organic Frameworks for Adsorption Heat Transformation
Garzón‐Tovar, L., Pérez‐Carvajal, J., Imaz, I., & Maspoch, D. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606424 · Cited by 154
Liu, Y., Yang, Y., & Li, S. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08850c · Cited by 110
Ci, H., Chang, H., Wang, R., Wei, T., Wang, Y., Chen, Z., Sun, Y., Dou, Z., Liu, Z., Li, J., et al. (2019) · Advanced Materials · doi:10.1002/adma.201901624 · Cited by 105
Self-citationPu, S., Su, J., Li, L., Wang, H., Chen, C., & Hu, X. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.11.027 · Cited by 81
Cited by
Phase Change Thermal Storage Materials for Interdisciplinary Applications
Wang, G., Tang, Z., Gao, Y., Liu, P., Li, Y., Li, A., & Chen, X. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00572 · Cited by 550
Xu, J., Li, T., Yan, T., Wu, S., Wu, M., Chao, J., Huo, X., Wang, P., & Wang, R. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01723c · Cited by 419
Self-citationAdsorption-based atmospheric water harvesting
Ejeian, M., & Wang, R. Z. (2021) · Joule · doi:10.1016/j.joule.2021.04.005 · Cited by 416
Self-citationCheng, P., Chen, X., Gao, H., Zhang, X., Tang, Z., Li, A., & Wang, G. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.105948 · Cited by 348
Tan, J., Fang, S., Zhang, Z., Yin, J., Li, L., Wang, X., & Guo, W. (2022) · Nature Communications · doi:10.1038/s41467-022-31221-7 · Cited by 297
Metadata
- Authors
- Wang, C., Hua, L., Yan, H., Li, B., Tu, Y., & Wang, R.
- Venue
- Joule
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 4
- Issue
- 2
- Pages
- 435-447
- ISSN
- 2542-4351 (ISSN-L)
- OpenAlex
- W3002263905
- Cited by
- 349
- References
- 37
- FWCI
- 17.51
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.