The DOI matches its Crossref record; 113 of the 113 references it cites were found in a registry or an index.
A review of current collectors for lithium-ion batteries
Open accessAbstract
Abstract Lithium-ion batteries are the state-of-the-art power source for most consumer electronic devices. Current collectors are indispensable components bridging lithium-ion batteries and external circuits, greatly influencing the capacity, rate capability and long-term stability of lithium-ion batteries. Conventional current collectors, Al and Cu foils have been used since the first commercial lithium-ion battery, and over the past two decades, the thickness of these current collectors has decreased in order to increase the energy density. However to improve the performance further, alternative materials and structures, as well as specific treatments such as etching and carbon coating, have also been investigated to enhance the electrochemical stability and electrical conductivity of current collectors, for next-generation lithium-ion batteries with higher capacities and longer service lifetime. This work reviews six types of materials for current collectors, including Al, Cu, Ni, Ti, stainless steel and carbonaceous materials, and compares these materials from five aspects of electrochemical stability, electrical conductivity, mechanical property, density and sustainability. The effects of three different structures of foil, mesh and foam as well as two treatments of chemical etching and coating are also discussed. Future opportunities are highlighted at the end of this review.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
30 Years of Lithium‐Ion Batteries
Li, M., Lu, J., Chen, Z., & Amine, K. (2018) · Advanced Materials · doi:10.1002/adma.201800561 · Cited by 6,039
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837
Recycling lithium-ion batteries from electric vehicles
Harper, G., Sommerville, R., Kendrick, E., Driscoll, L., Slater, P., Stolkin, R., Walton, A., Christensen, P., Heidrich, O., Lambert, S., et al. (2019) · Nature · doi:10.1038/s41586-019-1682-5 · Cited by 3,890
Self-citationStabilization wedges: solving the climate problem for the next 50 years with current technologies
Pacala, S., & Socolow, R. (2004) · Science · doi:10.1126/science.1100103 · Cited by 3,114
An, S. J., Li, J., Daniel, C., Mohanty, D., Nagpure, S., & Wood, D. L. (2016) · Carbon · doi:10.1016/j.carbon.2016.04.008 · Cited by 2,121
Review on recent progress of nanostructured anode materials for Li-ion batteries
Goriparti, S., Miele, E., De Angelis, F., Di Fabrizio, E., Proietti Zaccaria, R., & Capiglia, C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.103 · Cited by 2,092
PEM Fuel Cells: Theory and Practice
Barbir, F. (2012) · Cited by 1,938
Progress in flexible lithium batteries and future prospects
Zhou, G., Li, F., & Cheng, H.-M. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43182g · Cited by 1,498
Mesoporous Co3O4Nanowire Arrays for Lithium Ion Batteries with High Capacity and Rate Capability
Li, Y., Tan, B., & Wu, Y. (2008) · Nano Letters · doi:10.1021/nl0725906 · Cited by 1,271
Understanding electrochemical potentials of cathode materials in rechargeable batteries
Liu, C., Neale, Z. G., & Cao, G. (2016) · Materials Today · doi:10.1016/j.mattod.2015.10.009 · Cited by 1,156
Chemical Dealloying Derived 3D Porous Current Collector for Li Metal Anodes
Yun, Q., He, Y., Lv, W., Zhao, Y., Li, B., Kang, F., & Yang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201601409 · Cited by 870
Evolution of Strategies for Modern Rechargeable Batteries
Goodenough, J. B. (2013) · Accounts of Chemical Research · doi:10.1021/ar2002705 · Cited by 859
3D Porous Cu Current Collector/Li‐Metal Composite Anode for Stable Lithium‐Metal Batteries
Li, Q., Zhu, S., & Lu, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606422 · Cited by 854
Dendrite Growth in Lithium/Polymer Systems
Monroe, C., & Newman, J. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1606686 · Cited by 800
Real-Time NMR Investigations of Structural Changes in Silicon Electrodes for Lithium-Ion Batteries
Key, B., Bhattacharyya, R., Morcrette, M., Seznéc, V., Tarascon, J.-M., & Grey, C. P. (2009) · Journal of the American Chemical Society · doi:10.1021/ja8086278 · Cited by 752
Carbon materials for lithium-ion rechargeable batteries
Flandrois, S., & Simon, B. (1999) · Carbon · doi:10.1016/s0008-6223(98)00290-5 · Cited by 742
Separator technologies for lithium-ion batteries
Huang, X. (2010) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-010-1264-9 · Cited by 699
Zheng, H., Li, J., Song, X., Liu, G., & Battaglia, V. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.161 · Cited by 674
Optimizing Areal Capacities through Understanding the Limitations of Lithium-Ion Electrodes
Gallagher, K. G., Trask, S. E., Bauer, C., Woehrle, T., Lux, S. F., Tschech, M., Lamp, P., Polzin, B. J., Ha, S., Long, B., et al. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0321602jes · Cited by 646
Fabrication of NiO Nanowall Electrodes for High Performance Lithium Ion Battery
Varghese, B., Reddy, M. V., Yanwu, Z., Lit, C. S., Hoong, T. C., Subba Rao, G. V., Chowdari, B. V. R., Wee, A. T. S., Lim, C. T., & Sow, C.-H. (2008) · Chemistry of Materials · doi:10.1021/cm703512k · Cited by 643
Chen, C.-H., Brosa Planella, F., O’Regan, K., Gastol, D., Widanage, W. D., & Kendrick, E. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab9050 · Cited by 610
Self-citationChao, D., Xia, X., Liu, J., Fan, Z., Ng, C. F., Lin, J., Zhang, H., Shen, Z. X., & Fan, H. J. (2014) · Advanced Materials · doi:10.1002/adma.201400719 · Cited by 498
Stable Li Metal Anodes via Regulating Lithium Plating/Stripping in Vertically Aligned Microchannels
Wang, S., Yin, Y., Zuo, T., Dong, W., Li, J., Shi, J., Zhang, C., Li, N., Li, C., & Guo, Y. (2017) · Advanced Materials · doi:10.1002/adma.201703729 · Cited by 484
Si-Based Anode Materials for Li-Ion Batteries: A Mini Review
Ma, D., Cao, Z., & Hu, A. (2014) · Nano-Micro Letters · doi:10.1007/s40820-014-0008-2 · Cited by 468
Silicon nanowires for rechargeable lithium-ion battery anodes
Peng, K., Jie, J., Zhang, W., & Lee, S.-T. (2008) · Applied Physics Letters · doi:10.1063/1.2929373 · Cited by 421
Electrochemical behavior and passivation of current collectors in lithium-ion batteries
Myung, S.-T., Hitoshi, Y., & Sun, Y.-K. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04353b · Cited by 402
Mo, R., Rooney, D., Sun, K., & Yang, H. Y. (2017) · Nature Communications · doi:10.1038/ncomms13949 · Cited by 402
Luo, J., Fang, C., & Wu, N. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701482 · Cited by 390
In situ study of dendritic growth inlithium/PEO-salt/lithium cells
Brissot, C., Rosso, M., Chazalviel, J.-N., Baudry, P., & Lascaud, S. (1998) · Electrochimica Acta · doi:10.1016/s0013-4686(97)10055-x · Cited by 365
Zhang, C., Lv, W., Zhou, G., Huang, Z., Zhang, Y., Lyu, R., Wu, H., Yun, Q., Kang, F., & Yang, Q. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703404 · Cited by 351
Recovery of cathode materials and Al from spent lithium-ion batteries by ultrasonic cleaning
He, L.-P., Sun, S.-Y., Song, X.-F., & Yu, J.-G. (2015) · Waste Management · doi:10.1016/j.wasman.2015.08.035 · Cited by 341
Guo, R., Lu, L., Ouyang, M., & Feng, X. (2016) · Scientific Reports · doi:10.1038/srep30248 · Cited by 339
Characterization of commercially available lithium-ion batteries
Johnson, B. A., & White, R. E. (1998) · Journal of Power Sources · doi:10.1016/s0378-7753(97)02659-1 · Cited by 330
A review of blended cathode materials for use in Li-ion batteries
Chikkannanavar, S. B., Bernardi, D. M., & Liu, L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.052 · Cited by 316
Du, Z., Wood, D. L., Daniel, C., Kalnaus, S., & Li, J. (2017) · Journal of Applied Electrochemistry · doi:10.1007/s10800-017-1047-4 · Cited by 310
Zhuang, G. V., Xu, K., Yang, H., Jow, T. R., & Ross, P. N. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp052474w · Cited by 305
Design Strategies for High Power vs. High Energy Lithium Ion Cells
Lain, M. J., Brandon, J., & Kendrick, E. (2019) · Batteries · doi:10.3390/batteries5040064 · Cited by 302
Self-citationKraytsberg, A., & Ein‐Eli, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600655 · Cited by 299
Aluminum corrosion in electrolyte of Li-ion battery
Zhang, S. S., & Jow, T. R. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00110-6 · Cited by 286
Direct growth of SnO2 nanorod array electrodes for lithium-ion batteries
Liu, J., Li, Y., Huang, X., Ding, R., Hu, Y., Jiang, J., & Liao, L. (2009) · Journal of Materials Chemistry · doi:10.1039/b817036c · Cited by 281
Chen, S., Xin, Y., Zhou, Y., Ma, Y., Zhou, H., & Qi, L. (2014) · Energy & Environmental Science · doi:10.1039/c3ee42646g · Cited by 277
Wang, Y., Xia, H., Lu, L., & Lin, J. (2010) · ACS Nano · doi:10.1021/nn9012675 · Cited by 276
Arora, P., Doyle, M., Gozdz, A. S., White, R. E., & Newman, J. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00527-3 · Cited by 267
Vacuum distillation derived 3D porous current collector for stable lithium–metal batteries
An, Y., Fei, H., Zeng, G., Xu, X., Ci, L., Xi, B., Xiong, S., Feng, J., & Qian, Y. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.03.036 · Cited by 258
Electrolytes for Li-ion transport – Review
Marcinek, M., Syzdek, J., Marczewski, M., Piszcz, M., Niedzicki, L., Kalita, M., Plewa-Marczewska, A., Bitner, A., Wieczorek, P., Trzeciak, T., et al. (2015) · Solid State Ionics · doi:10.1016/j.ssi.2015.02.006 · Cited by 257
Lithium‐Ion Textile Batteries with Large Areal Mass Loading
Hu, L., La Mantia, F., Wu, H., Xie, X., McDonough, J., Pasta, M., & Cui, Y. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100261 · Cited by 257
Savvatimskiy, A. I. (2005) · Carbon · doi:10.1016/j.carbon.2004.12.027 · Cited by 249
Brandt, R., & Neuer, G. (2007) · International Journal of Thermophysics · doi:10.1007/s10765-006-0144-0 · Cited by 242
Morita, M., Shibata, T., Yoshimoto, N., & Ishikawa, M. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00164-0 · Cited by 228
Corrosion of Lithium‐Ion Battery Current Collectors
Braithwaite, J. W., Gonzales, A., Nagasubramanian, G., Lucero, S. J., Peebles, D. E., Ohlhausen, J. A., & Cieslak, W. R. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1391627 · Cited by 212
A High Areal Capacity Flexible Lithium‐Ion Battery with a Strain‐Compliant Design
Gaikwad, A. M., Khau, B. V., Davies, G., Hertzberg, B., Steingart, D. A., & Arias, A. C. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401389 · Cited by 211
Lee, H.-Y., & Lee, S.-M. (2004) · Electrochemistry Communications · doi:10.1016/j.elecom.2004.03.005 · Cited by 201
Enabling aqueous binders for lithium battery cathodes – Carbon coating of aluminum current collector
Doberdò, I., Loeffler, N., Laszczynski, N., Cericola, D., Penazzi, N., Bodoardo, S., Kim, G., & Passerini, S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.10.039 · Cited by 192
Si nanoparticle-decorated Si nanowire networks for Li-ion battery anodes
Hu, L., Wu, H., Hong, S. S., Cui, L., McDonough, J. R., Bohy, S., & Cui, Y. (2011) · Chem. Commun. · doi:10.1039/c0cc02078h · Cited by 184
Lithiophilic Ag Nanoparticle Layer on Cu Current Collector toward Stable Li Metal Anode
Hou, Z., Yu, Y., Wang, W., Zhao, X., Di, Q., Chen, Q., Chen, W., Liu, Y., & Quan, Z. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b01521 · Cited by 179
Chemical Composition of Passive Films on AISI 304 Stainless Steel
Lorang, G., Belo, M. D. C., Simões, A. M. P., et al. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2059338 · Cited by 178
Mei, W., Huang, J., Zhu, L., Ye, Z., Mai, Y., & Tu, J. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm00123c · Cited by 177
Jiang, J., Liu, J., Ding, R., Ji, X., Hu, Y., Li, X., Hu, A., Wu, F., Zhu, Z., & Huang, X. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp909785g · Cited by 177
Branched Co3O4/Fe2O3 nanowires as high capacity lithium-ion battery anodes
Wu, H., Xu, M., Wang, Y., & Zheng, G. (2013) · Nano Research · doi:10.1007/s12274-013-0292-z · Cited by 176
The development of low cost LiFePO4-based high power lithium-ion batteries
Striebel, K., Shim, J., Sierra, A., Yang, H., Song, X., Kostecki, R., & McCarthy, K. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.119 · Cited by 173
Characterization of electrolytic Co3O4 thin films as anodes for lithium-ion batteries
Liu, H.-C., & Yen, S.-K. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.01.072 · Cited by 171
Lu, L.-L., Zhang, Y., Pan, Z., Yao, H.-B., Zhou, F., & Yu, S.-H. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.06.004 · Cited by 170
Qiu, H., Tang, T., Asif, M., Huang, X., & Hou, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808468 · Cited by 167
Metal scarcity and sustainability, analyzing the necessity to reduce the extraction of scarce metals
Henckens, M. L. C. M., Driessen, P. P. J., & Worrell, E. (2014) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2014.09.012 · Cited by 164
Li, X., Dhanabalan, A., Bechtold, K., & Wang, C. (2010) · Electrochemistry Communications · doi:10.1016/j.elecom.2010.06.024 · Cited by 163
Jaiswal, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.049 · Cited by 159
Lin, K., Qin, X., Liu, M., Xu, X., Liang, G., Wu, J., Kang, F., Chen, G., & Li, B. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903229 · Cited by 159
Graphene oxide as a corrosion inhibitor for the aluminum current collector in lithium ion batteries
Prabakar, S. J. R., Hwang, Y., Bae, E. G., Lee, D. K., & Pyo, M. (2012) · Carbon · doi:10.1016/j.carbon.2012.09.013 · Cited by 148
Unique 3D nanoporous/macroporous structure Cu current collector for dendrite-free lithium deposition
Liu, H., Wang, E., Zhang, Q., Ren, Y., Guo, X., Wang, L., Li, G., & Yu, H. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.07.010 · Cited by 146
Park, K., Yu, S.-H., Lee, C., & Lee, H. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.07.052 · Cited by 142
Zeng, W., Zheng, F., Li, R., Yang, Z. Y., Li, Y., & Liu, J. (2012) · Nanoscale · doi:10.1039/c2nr30089c · Cited by 142
Wang, H., Liu, J., Bai, X., Wang, S., Yang, D., Fu, Y., & He, Y. (2019) · Waste Management · doi:10.1016/j.wasman.2019.04.058 · Cited by 142
Spherical Li Deposited inside 3D Cu Skeleton as Anode with Ultrastable Performance
Wang, Y., Wang, Z., Lei, D., Lv, W. Z., Zhao, Q., Ni, B., Liu, Y., Li, B., Kang, F., & He, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04881 · Cited by 141
Lai, C.-H., Huang, K.-W., Cheng, J., Lee, C.-Y., Lee, W.-F., Huang, C.-T., Hwang, B., & Chen, L. (2009) · Journal of Materials Chemistry · doi:10.1039/b909261g · Cited by 140
He, J., Li, Q., Chen, Y., Xu, C. G., Zhou, K., Wang, X., Zhang, W., & Li, Y. (2016) · Carbon · doi:10.1016/j.carbon.2016.12.001 · Cited by 137
Li4Ti5O12-based energy conversion and storage systems: Status and prospects
Xu, G. J., Han, P., Dong, S., Liu, H., Cui, G., & Chen, L. (2017) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2017.05.006 · Cited by 136
Zhou, W., Zheng, J., Yue, Y., & Guo, L. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.11.022 · Cited by 132
Atomic layer deposited (ALD) SnO2 anodes with exceptional cycleability for Li-ion batteries
Aravindan, V., Jinesh, K. B., Prabhakar, R. R., Kale, V. S., & Madhavi, S. (2013) · Nano Energy · doi:10.1016/j.nanoen.2012.12.007 · Cited by 122
Disassembly of Li Ion Cells—Characterization and Safety Considerations of a Recycling Scheme
Marshall, J. E., Gastol, D., Sommerville, R. P. Z., Middleton, B., Goodship, V., & Kendrick, E. (2020) · Metals · doi:10.3390/met10060773 · Cited by 119
Self-citationVertically aligned graphene electrode for lithium ion battery with high rate capability
Xiao, X., Liu, P., Wang, J. S., Verbrugge, M. W., & Balogh, M. P. (2010) · Electrochemistry Communications · doi:10.1016/j.elecom.2010.12.016 · Cited by 116
Wang, X., Liu, B., Hou, X., Wang, Q., Li, W., Chen, D., & Shen, G. (2014) · Nano Research · doi:10.1007/s12274-014-0470-7 · Cited by 116
Wiemers‐Meyer, S., Jeremias, S., Winter, M., & Nowak, S. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.11.100 · Cited by 113
Mixed salts of LiTFSI and LiBOB for stable LiFePO4-based batteries at elevated temperatures
Chen, X., Xu, W., Engelhard, M., Zheng, J.-M., Zhang, Y.-H., Ding, F., Qian, J.-F., & Zhang, J.-G. (2014) · Journal of Materials Chemistry A · doi:10.1039/c3ta13043f · Cited by 107
Ni, S., Yang, X., & Li, T. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm15394g · Cited by 105
Electrochemical Stability of Copper in Lithium-Ion Battery Electrolytes
Zhao, M., Kariuki, S., Dewald, H. D., Lemke, F. R., Staniewicz, R. J., Plichta, E. J., & Marsh, R. A. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393619 · Cited by 99
Lu, H., Hagberg, J., Lindbergh, G., & Cornell, A. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.06.043 · Cited by 97
Qin, L., Xu, H. J., Wang, D., Zhu, J., Chen, J., Zhang, W., Zhang, P., Zhang, Y., Tian, W., & Sun, Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b07362 · Cited by 95
Long, H., Shi, T., Jiang, S., Xi, S., Chen, R., Liu, S., Liao, G., & Tang, Z. (2014) · Journal of Materials Chemistry A · doi:10.1039/c3ta15021f · Cited by 92
Chu, S., Zhong, Y., Cai, R., Zhang, Z., Wei, S., & Shao, Z. (2016) · Small · doi:10.1002/smll.201602179 · Cited by 91
Zhang, L., Li, Z., Yang, X., Ding, X., Zhou, Y.-X., Sun, H., Tao, H., Xiong, L., & Huang, Y. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.02.026 · Cited by 91
Zhan, L., Wang, S., Ding, L., Zhong, L. S., & Wang, H. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.04.139 · Cited by 90
Hu, J. W., Wu, Z. P., Zhong, S. W., Zhang, W. B., Suresh, S., Mehta, A., & Koratkar, N. A. (2015) · Carbon · doi:10.1016/j.carbon.2015.02.024 · Cited by 86
Electrochemical oxidation of propylene carbonate (containing various salts) on aluminium electrodes
Kanamura, K., Okagawa, T., & Takehara, Z. (1995) · Journal of Power Sources · doi:10.1016/0378-7753(95)02265-1 · Cited by 85
Mechanical properties of commercial copper current-collector foils
Zhu, J., Feng, J., & Guo, Z. (2014) · RSC Advances · doi:10.1039/c4ra07675c · Cited by 84
Xu, X., Liu, J., Hu, R., Liu, J., Ouyang, L., & Zhu, M. H. (2017) · Chemistry - A European Journal · doi:10.1002/chem.201700147 · Cited by 82
A synthesis of graphene/Co3O4 thin films for lithium ion battery anodes by coelectrodeposition
Kim, G.-P., Nam, I., Kim, N. D., et al. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.05.032 · Cited by 74
Choi, J. W., Hu, L., Cui, L., McDonough, J. R., & Cui, Y. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.108 · Cited by 69
Few-layer graphene coated current collectors for safe and powerful lithium ion batteries
Kim, S. Y., Song, Y. I., Wee, J., Kim, C. H., Ahn, B. W., Lee, J. W., Shu, S. J., Terrones, M., Kim, Y. A., & Yang, C.-M. (2019) · Carbon · doi:10.1016/j.carbon.2019.07.032 · Cited by 65
Current Collectors for Rechargeable Li-Air Batteries
Veith, G. M., & Dudney, N. J. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3569750 · Cited by 64
Ni foam as the current collector for high capacity C–Si composite electrode
Sa, Q., & Wang, Y. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.020 · Cited by 61
Martha, S. K., Dudney, N. J., Kiggans, J., et al. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.041210jes · Cited by 55
Cai, D., Li, D., Ding, L., Wang, S., & Wang, H. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.02.010 · Cited by 54
Susantyoko, R. A., Wang, X., Xiao, Q., Fitzgerald, E. A., & Zhang, Q. (2013) · Carbon · doi:10.1016/j.carbon.2013.11.041 · Cited by 50
Kawamura, T., Tanaka, T., Egashira, M., Watanabe, I., Okada, S., & Yamaki, J.-I. (2005) · Electrochemical and Solid-State Letters · doi:10.1149/1.1993367 · Cited by 47
Du, X., Wang, Q., Feng, T., Chen, X., Li, L., Li, L., Meng, X., Xiong, L., Sun, X., Lu, L., et al. (2016) · Scientific Reports · doi:10.1038/srep20138 · Cited by 41
Anodic polarization behavior of copper in propylene carbonate
Kawakita, J., & Kobayashi, K. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00555-9 · Cited by 34
Mechanical properties of carbon fiber/cellulose composite papers modified by hot-melting fibers
Shi, Y., & Wang, B. (2014) · Progress in Natural Science Materials International · doi:10.1016/j.pnsc.2014.01.006 · Cited by 34
Carbon Abundances in Starburst Galaxies of the Local Universe
Peña-Guerrero, M. A., Leitherer, C., de Mink, S. E., Wofford, A., & Kewley, L. J. (2017) · The Astrophysical Journal · doi:10.3847/1538-4357/aa88bf · Cited by 26
Chu, Q., Yang, B., Wang, W., Tong, W., Wang, X., Liu, X., & Chen, J. (2016) · ChemistrySelect · doi:10.1002/slct.201601198 · Cited by 22
Flexible and Lightweight Lithium-Ion Batteries Based on Cellulose Nanofibrils and Carbon Fibers
Lu, H., Hagberg, J., Lindbergh, G., & Cornell, A. (2018) · Batteries · doi:10.3390/batteries4020017 · Cited by 18
Hsu, C., Lin, H.-H., Liu, Y., & Lin, H. (2018) · New Journal of Chemistry · doi:10.1039/c8nj01137k · Cited by 18
Cited by
Li, J., Fleetwood, J., Hawley, W. B., & Kays, W. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00565 · Cited by 895
Comprehensive review of lithium-ion battery materials and development challenges
Nasajpour-Esfahani, N., Garmestani, H., Bagheritabar, M., Jasim, D. J., Toghraie, D., Dadkhah, S., & Firoozeh, H. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2024.114783 · Cited by 374
Quantifying the life-cycle health impacts of a cobalt-containing lithium-ion battery
Arvidsson, R., Chordia, M., & Nordelöf, A. (2022) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-022-02084-3 · Cited by 51
Metadata
- Authors
- Zhu, P., Gastol, D., Marshall, J., Sommerville, R., Goodship, V., & Kendrick, E.
- Venue
- Journal of Power Sources
- Publisher
- Elsevier BV
- Published
- 2021-02
- Volume
- 485
- Pages
- 229321
- ISSN
- 0378-7753 (ISSN-L)
- OpenAlex
- W3112870719
- Cited by
- 523
- References
- 113
- FWCI
- 14.43
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.