The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Effective design and simulation of surface-based lattice structures featuring volume fraction and cell type grading
Open accessAbstract
In this paper we present a numerical investigation into surface-based lattice structures with the aim of facilitating their design for additive manufacturing. We give the surface equations for these structures and show how they can be used to tailor their volume fractions. Finite element analysis is used to investigate the effect of cell type, orientation and volume fraction on the elastic moduli of the lattice structures, giving rise to a valuable set of numerical parameters which can be used to design a lattice to provide a specified stiffness. We find the I-WP lattice in the [001] orientation provides the highest stiffness along a single loading direction, but the diamond lattice may be more suitable for cases where lower mechanical anisotropy is important. Our stiffness models enable the construction of a powerful numerical tool for predicting the performance of graded structures. We highlight a particular problem which can arise when two lattice types are hybridised; an aberration leading to structural weakening and high stress concentrations. We put forward a novel solution to this problem and demonstrate its usage. The methods and results detailed in this paper enable the efficient design of lattice structures functionally graded by volume fraction and cell type.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
Ultralight, ultrastiff mechanical metamaterials
Zheng, X., Lee, H., Weisgraber, T. H., Shusteff, M., DeOtte, J., Duoss, E. B., Kuntz, J. D., Biener, M. M., Ge, Q., Jackson, J. A., et al. (2014) · Science · doi:10.1126/science.1252291 · Cited by 2,308
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
Effective properties of the octet-truss lattice material
Deshpande, V. S., Fleck, N. A., & Ashby, M. F. (2001) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00010-2 · Cited by 1,741
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
The topological design of multifunctional cellular metals
Evans, A. G., Hutchinson, J. W., Fleck, N. A., Ashby, M. F., & Wadley, H. N. G. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00016-5 · Cited by 1,134
Sing, S. L., An, J., Yeong, W. Y., & Wiria, F. E. (2016) · Journal of Orthopaedic Research · doi:10.1002/jor.23075 · Cited by 942
Al-Ketan, O., Rowshan, R., & Abu Al-Rub, R. K. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.006 · Cited by 941
Gorsse, S., Hutchinson, C., Gouné, M., & Banerjee, R. (2017) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2017.1361305 · Cited by 920
Gesammelte Mathematische Abhandlungen: Erster Band
Schwarz, H. A. (1890) · Springer eBooks · doi:10.1007/978-3-642-50665-9 · Cited by 827
Maskery, I., Sturm, L., Aremu, A. O., Panesar, A., Williams, C. B., Tuck, C. J., Wildman, R. D., Ashcroft, I. A., & Hague, R. J. M. (2018) · Polymer · doi:10.1016/j.polymer.2017.11.049 · Cited by 728
Self-citationYan, C., Hao, L., Hussein, A., & Young, P. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.06.024 · Cited by 717
Maskery, I., Aboulkhair, N. T., Aremu, A. O., Tuck, C. J., Ashcroft, I. A., Wildman, R. D., & Hague, R. J. M. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.06.013 · Cited by 706
Self-citationCompressive failure modes and energy absorption in additively manufactured double gyroid lattices
Maskery, I., Aboulkhair, N. T., Aremu, A. O., Tuck, C. J., & Ashcroft, I. A. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.04.003 · Cited by 575
Self-citationSmith, M., Guan, Z., & Cantwell, W. J. (2013) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2012.12.004 · Cited by 545
Infinite periodic minimal surfaces without self-intersections
Schoen, A. H. (1970) · NASA Technical Reports Server (NASA) · Cited by 492
Panesar, A., Abdi, M., Hickman, D., & Ashcroft, I. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.008 · Cited by 489
Self-citationComposite 3D-printed metastructures for low-frequency and broadband vibration absorption
Matlack, K. H., Bauhofer, A. A., Krödel, S., Palermo, A., & Daraio, C. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1600171113 · Cited by 480
Abueidda, D. W., Bakir, M., Abu Al-Rub, R. K., Bergström, J. S., Sobh, N. A., & Jasiuk, I. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.018 · Cited by 455
Yan, C., Hao, L., Hussein, A., Bubb, S. L., Young, P., & Raymont, D. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.12.004 · Cited by 362
An investigation into reinforced and functionally graded lattice structures
Maskery, I., Hussey, A., Panesar, A., Aremu, A., Tuck, C., Ashcroft, I., & Hague, R. (2017) · Journal of Cellular Plastics · doi:10.1177/0021955x16639035 · Cited by 339
Self-citationEffective conductivities and elastic moduli of novel foams with triply periodic minimal surfaces
Abueidda, D. W., Abu Al-Rub, R. K., Dalaq, A. S., Lee, D.-W., Khan, K. A., & Jasiuk, I. (2016) · Mechanics of Materials · doi:10.1016/j.mechmat.2016.01.004 · Cited by 317
Triply Periodic Bicontinuous Cubic Microdomain Morphologies by Symmetries
Wohlgemuth, M., Yufa, N., Hoffman, J., & Thomas, E. L. (2001) · Macromolecules · doi:10.1021/ma0019499 · Cited by 295
Montazerian, H., Davoodi, E., Asadi-Eydivand, M., Kadkhodapour, J., & Solati-Hashjin, M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.009 · Cited by 286
Computer-aided porous scaffold design for tissue engineering using triply periodic minimal surfaces
Yoo, D.-J. (2011) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-011-0008-9 · Cited by 271
Drop weight impact behaviour of sandwich panels with metallic micro lattice cores
Mines, R. A. W., Tsopanos, S., Shen, Y., Hasan, R., & McKown, S. T. (2013) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2013.04.007 · Cited by 253
Zhang, P., Toman, J., Yu, Y., Biyikli, E., Kırca, M., Chmielus, M., & To, A. C. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028724 · Cited by 248
Wong, M., Owen, I., Sutcliffe, C. J., & Puri, A. (2009) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2008.06.002 · Cited by 236
An investigation into the compressive properties of stainless steel micro-lattice structures
Ushijima, K., Cantwell, W., Mines, R., Tsopanos, S., & Smith, M. (2011) · Journal of Sandwich Structures & Materials · doi:10.1177/1099636210380997 · Cited by 232
The design of impact absorbing structures for additive manufacture
Brennan-Craddock, J. P. J., Brackett, D., Wildman, R. D., & Hague, R. (2012) · Journal of Physics Conference Series · doi:10.1088/1742-6596/382/1/012042 · Cited by 135
Self-citationKirsch, K. L., & Thole, K. A. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.01.095 · Cited by 134
Yoo, D.-J., & Kim, K.-H. (2015) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-015-0263-2 · Cited by 131
3D Printing of Biocompatible Supramolecular Polymers and their Composites
Hart, L. R., Li, S., Sturgess, C., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10471 · Cited by 120
Selective laser melting of aluminum alloys
Aboulkhair, N. T., Everitt, N. M., Maskery, I., Ashcroft, I., & Tuck, C. J. (2017) · MRS Bulletin · doi:10.1557/mrs.2017.63 · Cited by 116
Self-citationWang, X., Zhang, P., Ludwick, S. J., et al. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.10.001 · Cited by 108
Curved surfaces in chemical structure
Klinowski, J., Mackay, A. L., & Terrones, H. (1996) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.1996.0086 · Cited by 70
An error diffusion based method to generate functionally graded cellular structures
Brackett, D. J., Ashcroft, I., Wildman, R. D., & Hague, R. (2014) · Computers & Structures · doi:10.1016/j.compstruc.2014.03.004 · Cited by 51
Self-citation
Cited by
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Al-Ketan, O., & Abu Al-Rub, R. K. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900524 · Cited by 887
Feng, J., Fu, J., Yao, X., & He, Y. (2022) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ac5be6 · Cited by 813
Chowdhury, S., Yadaiah, N., Prakash, C., Ramakrishna, S., Dixit, S., Gupta, L. R., & Buddhi, D. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.121 · Cited by 784
Plocher, J., & Panesar, A. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108164 · Cited by 669
Khan, N., & Riccio, A. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101021 · Cited by 486
Metadata
- Authors
- Maskery, I., Aremu, A. O., Parry, L., Wildman, R. D., Tuck, C. J., & Ashcroft, I. A.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 155
- Pages
- 220-232
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2805505517
- Cited by
- 441
- References
- 38
- FWCI
- 19.51
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.