The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Powder bed fusion process in additive manufacturing: An overview
Abstract
Abstract Powder bed fusion process is one of the basic technique associated with additive manufacturing. It follows the basic principle of manufacturing the product layer by layer and their fusion. A heat source focuses its heat over a powder base material and heats the selected cross section area. Sources like laser beam, electron beam and infrared beam are used as heating tool. The process of heating allows the powder to take the shape of the intended object. Powder bed fusion process is compatible to every engineering material such as metals, ceramics polymers, composites etc. this technique is widely used in many industrial sectors such as aerospace, energy sector, transportation etc. A comprehensive overview on powder bed fusion process is presented in this review paper. Other popular techniques like selective laser melting (SLM), selective laser sintering (SLS), and electron beam melting (EBM) are also reviewed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.004 · Cited by 2,017
Residual stresses in selective laser sintering and selective laser melting
Mercelis, P., & Kruth, J. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610707013 · Cited by 2,015
Binding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
“Industrie 4.0” and Smart Manufacturing – A Review of Research Issues and Application Examples
Thoben, K.-D., BIBA – Bremer Institut für Produktion und Logistik GmbH, T. U. O. B., Wiesner, S., Wuest, T., Faculty of Production Engineering, U. O. B., & Industrial and Management Systems Engineering (2017) · International Journal of Automation Technology · doi:10.20965/ijat.2017.p0004 · Cited by 1,133
The Role of Additive Manufacturing in the Era of Industry 4.0
Dilberoglu, U. M., Gharehpapagh, B., Yaman, U., & Dolen, M. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.148 · Cited by 1,000
Rafi, H. K., Karthik, N. V., Gong, H., Starr, T. L., & Stucker, B. E. (2013) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-013-0658-0 · Cited by 987
Mechanical Properties of AlSi10Mg Produced by Selective Laser Melting
Kempen, K., Thijs, L., Van Humbeeck, J., & Kruth, J.-P. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.10.059 · Cited by 849
Gokuldoss, P. K., Kolla, S., & Eckert, J. (2017) · Materials · doi:10.3390/ma10060672 · Cited by 804
Review of additive manufacturing technologies and applications in the aerospace industry
Najmon, J. C., Raeisi, S., & Tovar, A. (2019) · Additive Manufacturing for the Aerospace Industry · doi:10.1016/b978-0-12-814062-8.00002-9 · Cited by 719
Residual Stress in Metal Additive Manufacturing
Li, C., Liu, Z. Y., Fang, X. Y., & Guo, Y. B. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.05.039 · Cited by 708
Zhao, X., Li, S., Zhang, M., Liu, Y., Sercombe, T. B., Wang, S., Hao, Y., Yang, R., & Murr, L. E. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.135 · Cited by 673
High Power Selective Laser Melting (HP SLM) of Aluminum Parts
Buchbinder, D., Schleifenbaum, H., Heidrich, S., Meiners, W., & Bültmann, J. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.035 · Cited by 666
Direct selective laser sintering of metals
Agarwala, M., Bourell, D., Beaman, J., Marcus, H., & Barlow, J. (1995) · Rapid Prototyping Journal · doi:10.1108/13552549510078113 · Cited by 571
Additive Manufacturing Technologies: An Overview about 3D Printing Methods and Future Prospects
Jiménez, M., Romero, L., Domínguez, I. A., Espinosa, M. D. M., & Domínguez, M. (2019) · Complexity · doi:10.1155/2019/9656938 · Cited by 509
3D printing technologies for electrochemical energy storage
Zhang, F., Wei, M., Viswanathan, V. V., Swart, B., Shao, Y., Wu, G., & Zhou, C. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.037 · Cited by 494
Uriondo, A., Esperon-Miguez, M., & Perinpanayagam, S. (2015) · Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering · doi:10.1177/0954410014568797 · Cited by 489
The effects of PLA color on material properties of 3-D printed components
Wittbrodt, B., & Pearce, J. M. (2015) · Additive manufacturing · doi:10.1016/j.addma.2015.09.006 · Cited by 473
Murr, L. E., Martinez, E., Amato, K. N., Gaytan, S. M., Hernandez, J., Ramirez, D. A., Shindo, P. W., Medina, F., & Wicker, R. B. (2012) · Journal of Materials Research and Technology · doi:10.1016/s2238-7854(12)70009-1 · Cited by 470
Gobert, C., Reutzel, E. W., Petrich, J., Nassar, A. R., & Phoha, S. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.005 · Cited by 447
Aerospace applications of laser additive manufacturing
Liu, R., Wang, Z., Sparks, T., Liou, F., & Newkirk, J. (2017) · Laser Additive Manufacturing · doi:10.1016/b978-0-08-100433-3.00013-0 · Cited by 426
Galarraga, H., Lados, D. A., Dehoff, R., Kirka, M. M., & Nandwana, P. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.02.003 · Cited by 334
King, W., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., & Khairallah, S. A. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000728 · Cited by 308
Next Generation Orthopaedic Implants by Additive Manufacturing Using Electron Beam Melting
Murr, L. E., Gaytan, S. M., Martinez, E., Medina, F., & Wicker, R. B. (2012) · International Journal of Biomaterials · doi:10.1155/2012/245727 · Cited by 306
Defect characteristics and analysis of their variability in metal L-PBF additive manufacturing
Sanaei, N., Fatemi, A., & Phan, N. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108091 · Cited by 301
A literature review of powder-based electron beam melting focusing on numerical simulations
Galati, M., & Iuliano, L. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.001 · Cited by 300
Zhang, X.-Y., Fang, G., Leeflang, S., Böttger, A. J., A. Zadpoor, A., & Zhou, J. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.11.263 · Cited by 274
Effect of stress relaxation on distortion in additive manufacturing process modeling
Denlinger, E. R., & Michaleris, P. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.011 · Cited by 266
A review on powder bed fusion technology of metal additive manufacturing
Bhavar, V., Kattire, P., Patil, V., Khot, S., Gujar, K., & Singh, R. (2017) · Additive Manufacturing Handbook · doi:10.1201/9781315119106-15 · Cited by 258
Self-citationMetallurgy of additive manufacturing: Examples from electron beam melting
Murr, L. E. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2014.12.002 · Cited by 247
Additive Manufacturing Handbook
Lieh, J., Wang, B., & Badiru, O. (2017) · CRC Press eBooks · doi:10.1201/9781315119106 · Cited by 236
Polymer powders for selective laser sintering (SLS)
Schmid, M., Amado, A., & Wegener, K. (2015) · AIP Conference Proceedings · doi:10.1063/1.4918516 · Cited by 231
Chen, C., Xie, Y., Yan, X., Yin, S., FUKANUMA, H., Huang, R., Zhao, R., Wang, J., Ren, Z., Liu, M., et al. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.03.028 · Cited by 210
Arısoy, Y. M., Criales, L. E., Özel, T., Lane, B., Moylan, S., & Donmez, A. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9429-z · Cited by 190
Precipitation Reactions in Age-Hardenable Alloys During Laser Additive Manufacturing
Jägle, E. A., Sheng, Z., Wu, L., Lu, L., Risse, J., Weisheit, A., & Raabe, D. (2016) · JOM · doi:10.1007/s11837-015-1764-2 · Cited by 187
Prabhakar, P., Sames, W. J., Dehoff, R., & Babu, S. S. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.03.003 · Cited by 185
Murr, L. E. (2018) · Metallography Microstructure and Analysis · doi:10.1007/s13632-018-0433-6 · Cited by 156
Laser powder-bed fusion of Inconel 718 to manufacture turbine blades
Caiazzo, F., Alfieri, V., Corrado, G., & Argenio, P. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0839-3 · Cited by 154
Verhoef, L. A., Budde, B., Chockalingam, C., Nodar, B. G., & van Wijk, A. (2017) · Energy Policy · doi:10.1016/j.enpol.2017.10.034 · Cited by 149
Chen, Q., Guillemot, G., Gandin, C., & Bellet, M. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.02.005 · Cited by 135
Kumar, A. Y., Wang, J., Bai, Y., Huxtable, S. T., & Williams, C. B. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108001 · Cited by 125
Effects of Hot Isostatic Pressing on Copper Parts Fabricated via Binder Jetting
Kumar, A. Y., Bai, Y., Eklund, A., & Williams, C. B. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.084 · Cited by 124
Martukanitz, R. P., Michaleris, P., Palmer, T. A., DebRoy, T., Liu, Z., Otis, R., Heo, T. W., & Chen, L. (2014) · Additive manufacturing · doi:10.1016/j.addma.2014.09.002 · Cited by 123
The effects of Hot Isostatic Pressing on parts fabricated by binder jetting additive manufacturing
Kumar, A. Y., Bai, Y., Eklund, A., & Williams, C. B. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.09.021 · Cited by 116
DMLS - DEVELOPMENT HISTORY AND STATE OF THE ART
Shellabear, M., & Nyrhilä, O. (2004) · Cited by 104
Irrinki, H., Jangam, J. S. D., Pasebani, S., Badwe, S., Stitzel, J., Kate, K. H., Gülsoy, H. Ö., & Atre, S. V. (2018) · Powder Technology · doi:10.1016/j.powtec.2018.03.025 · Cited by 101
Additively Manufactured Inconel 718 : Microstructures and Mechanical Properties
Deng, D. (2018) · Linköping studies in science and technology. Thesis · doi:10.3384/lic.diva-144491 · Cited by 84
Methods and Tools for Performance Assurance of Smart Manufacturing Systems
Kibira, D., Morris, K. C., & Kumaraguru, S. (2016) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.121.013 · Cited by 70
3D printing of biocomposites for osteochondral tissue engineering
Vyas, C., Poologasundarampillai, G., Hoyland, J. A., & Bártolo, P. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100752-5.00013-5 · Cited by 38
Effect of Additive Manufacturing Process Parameters on Turbine Cooling
Snyder, J. C., & Thole, K. A. (2019) · Volume 5B: Heat Transfer · doi:10.1115/gt2019-90862 · Cited by 21
Cited by
Fused deposition modeling: process, materials, parameters, properties, and applications
Rajan, K., Samykano, M., Kadirgama, K., Harun, W. S. W., & Rahman, M. M. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08860-7 · Cited by 426
Metadata
- Authors
- Singh, R., Gupta, A., Tripathi, O., Srivastava, S., Singh, B., Awasthi, A., Rajput, S. K., Sonia, P., Singhal, P., & Saxena, K. K.
- Venue
- Materials Today: Proceedings
- Publisher
- Elsevier BV
- Published
- 2020
- Volume
- 26
- Pages
- 3058-3070
- ISSN
- 2214-7853 (ISSN-L)
- OpenAlex
- W3012208874
- Cited by
- 300
- References
- 52
- FWCI
- 15.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.