The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
MXene materials based printed flexible devices for healthcare, biomedical and energy storage applications
Open accessAbstract
The advent of cost effective printed smart devices has revolutionized the healthcare sector by allowing disease prediction and timely treatment through non-invasive real time and continuous health monitoring. Future advancements in printed electronic (PE) materials will continue to enhance the quality of human living. For any PE application, materials should possess proper mechanical integrity and resistivity while being non-toxic. In the case of sensing devices for physiological and biochemical signals, excellent conductivity is an essential requirement for obtaining high response signals. The emergence of the novel class of 2D materials called MXenes and their composites has resulted in structures and materials hugely relevant for healthcare devices. Exploiting solution based 2D MXene materials can expedite their practical application in PE devices by overcoming the present limitations of conductive inks such as poor conductivity and the high cost of alternative functional inks. There has been much progress in the MXene functional ink generation and its PE device applications since its discovery in 2011. This review summarizes the MXene ink formulation for additive patterning and the development of PE devices enabled by them in healthcare, biomedical and related power provision applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Photoluminescence from Chemically Exfoliated MoS 2
Eda, G., Yamaguchi, H., Voiry, D., Fujita, T., Chen, M., & Chhowalla, M. (2011) · Nano Letters · doi:10.1021/nl201874w · Cited by 3,896
Highly sensitive flexible pressure sensors with microstructured rubber dielectric layers
Mannsfeld, S. C. B., Tee, B. C.-K., Stoltenberg, R. M., Chen, C. V. H.-H., Barman, S., Muir, B. V. O., Sokolov, A. N., Reese, C., & Bao, Z. (2010) · Nature Materials · doi:10.1038/nmat2834 · Cited by 3,291
Trung, T. Q., & Lee, N. (2016) · Advanced Materials · doi:10.1002/adma.201504244 · Cited by 2,160
A wearable and highly sensitive pressure sensor with ultrathin gold nanowires
Gong, S., Schwalb, W., Wang, Y., Chen, Y., Tang, Y., Si, J., Shirinzadeh, B., & Cheng, W. (2014) · Nature Communications · doi:10.1038/ncomms4132 · Cited by 2,064
Schwartz, G., Tee, B. C.-K., Mei, J., Appleton, A. L., Kim, D. H., Wang, H., & Bao, Z. (2013) · Nature Communications · doi:10.1038/ncomms2832 · Cited by 2,042
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Advances of flexible pressure sensors toward artificial intelligence and health care applications
Zang, Y., Zhang, F., Di, C.-A., & Zhu, D. (2015) · Materials Horizons · doi:10.1039/c4mh00147h · Cited by 1,272
Ultrathin conformal devices for precise and continuous thermal characterization of human skin
Webb, R. C., Bonifas, A. P., Behnaz, A., Zhang, Y., Yu, K. J., Cheng, H., Shi, M., Bian, Z., Liu, Z., Kim, Y.-S., et al. (2013) · Nature Materials · doi:10.1038/nmat3755 · Cited by 1,229
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Khan, S., Lorenzelli, L., & Dahiya, R. S. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2014.2375203 · Cited by 1,225
Synthesis and thermal stability of two-dimensional carbide MXene Ti3C2
Li, Z., Wang, L., Sun, D., Zhang, Y., Liu, B., Hu, Q., & Zhou, A. (2015) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2014.10.009 · Cited by 928
Room Temperature Gas Sensing of Two-Dimensional Titanium Carbide (MXene)
Lee, E., VahidMohammadi, A., Prorok, B. C., Yoon, Y. S., Beidaghi, M., & Kim, D.-J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11055 · Cited by 878
Flexible and Stretchable Electronics for Biointegrated Devices
Kim, D.-H., Ghaffari, R., Lu, N., & Rogers, J. A. (2012) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-071811-150018 · Cited by 749
Oxidative stress and aberrant signaling in aging and cognitive decline
Dröge, W., & Schipper, H. M. (2007) · Aging Cell · doi:10.1111/j.1474-9726.2007.00294.x · Cited by 479
Liu, H., Duan, C., Yang, C., Shen, W., Wang, F., & Zhu, Z. (2015) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2015.04.090 · Cited by 475
A Flexible Bimodal Sensor Array for Simultaneous Sensing of Pressure and Temperature
Tien, N. T., Jeon, S., Kim, D., Trung, T. Q., Jang, M., Hwang, B., Byun, K., Bae, J., Lee, E., Tok, J. B. ‐., et al. (2014) · Advanced Materials · doi:10.1002/adma.201302869 · Cited by 438
Roll-to-Roll Gravure Printed Electrochemical Sensors for Wearable and Medical Devices
Bariya, M., Shahpar, Z., Park, H., Sun, J., Jung, Y., Gao, W., Nyein, H. Y. Y., Liaw, T. S., Tai, L.-C., Ngo, Q. P., et al. (2018) · ACS Nano · doi:10.1021/acsnano.8b02505 · Cited by 417
Harada, S., Kanao, K., Yamamoto, Y., Arie, T., Akita, S., & Takei, K. (2014) · ACS Nano · doi:10.1021/nn506293y · Cited by 350
Can Li-Ion batteries be the panacea for automotive applications?
Opitz, A., Badami, P., Shen, L., Vignarooban, K., & Kannan, A. M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.10.019 · Cited by 284
MXene‐Based Nonlinear Optical Information Converter for All‐Optical Modulator and Switcher
Wu, L., Jiang, X., Zhao, J., Liang, W., Li, Z., Huang, W., Lin, Z., Wang, Y., Zhang, F., Lu, S., et al. (2018) · Laser & Photonics Reviews · doi:10.1002/lpor.201800215 · Cited by 183
Leininger, S., Adamski, M., Bergum, B., Guder, C., Liu, J., Laplante, M., Bråte, J., Hoffmann, F., Fortunato, S., Jordal, S., et al. (2014) · Nature Communications · doi:10.1038/ncomms4905 · Cited by 136
Cited by
Progress in 3D-MXene Electrodes for Lithium/Sodium/Potassium/Magnesium/Zinc/Aluminum-Ion Batteries
Bashir, T., Zhou, S., Yang, S., Ismail, S. A., Ali, T., Wang, H., Zhao, J., & Gao, L. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-022-00174-2 · Cited by 284
Metadata
- Authors
- Sreenilayam, S. P., Ul Ahad, I., Nicolosi, V., & Brabazon, D.
- Venue
- Materials Today
- Publisher
- Elsevier BV
- Published
- 2021-03
- Volume
- 43
- Pages
- 99-131
- ISSN
- 1369-7021 (ISSN-L)
- OpenAlex
- W3126639421
- Cited by
- 192
- References
- 21
- FWCI
- 10.41
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.