A symmetry invariant formulation of the relationship between the elasticity tensor and the fabric tensor
Open accessThe DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
The fabric tensor is employed as a quantitative stereological measure of the structural anisotropy in the pore architecture of a porous medium. Earlier work showed that the fabric tensor can be used additionally to the porosity to describe the anisotropy in the elastic constants of the porous medium. This contribution presents a reformulation of the relationship between fabric tensor and anisotropic elastic constants that is approximation free and symmetry-invariant. From specific data on the elastic constants and the fabric, the parameters in the reformulated relationship can be evaluated individually and efficiently using a simplified method that works independent of the material symmetry. The well-behavedness of the parameters and the accuracy of the method was analyzed using the Mori–Tanaka model for aligned ellipsoidal inclusions and using Buckminster Fuller’s octet-truss lattice. Application of the method to a cancellous bone data set revealed that employing the fabric tensor allowed explaining 75–90% of the total variance. An implementation of the proposed methods was made publicly available.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The quantitative morphology of anisotropic trabecular bone
Whitehouse, W. J. (1974) · Journal of Microscopy · doi:10.1111/j.1365-2818.1974.tb03878.x · Cited by 579 · cited 3×
“Directional data can be obtained by using stereographic or image analysis methods (Odgaard, 1997) such as Mean Intercept Length (Whitehouse, 1974), Volume Orientation (VO) (Odgaard et al., 1990), Star Length Distribution (SLD) (Smit et al., 1998), or Intercept Segment Deviation (ISD) (Chiang et al., 2006).”
The relationship between the elasticity tensor and the fabric tensor
Cowin, S. C. (1985) · Mechanics of Materials · doi:10.1016/0167-6636(85)90012-2 · Cited by 570
Self-citationFabric and elastic principal directions of cancellous bone are closely related
Odgaard, A., Kabel, J., van Rietbergen, B., Dalstra, M., & Huiskes, R. (1997) · Journal of Biomechanics · doi:10.1016/s0021-9290(96)00177-7 · Cited by 338
Kabel, J., van Rietbergen, B., Odgaard, A., & Huiskes, R. (1999) · Bone · doi:10.1016/s8756-3282(99)00190-8 · Cited by 206
The Anisotropic Hooke's Law for Cancellous Bone and Wood
Yang, G., Kabel, J., Van Rietbergen, B., Odgaard, A., Huiskes, R., & Cown, S. C. (1998) · Journal of Elasticity · doi:10.1023/a:1007575322693 · Cited by 140 · cited 1×
“These same data were analyzed by a different method in Yang et al. (1998).”
MethodMatsuura, M., Eckstein, F., Lochmüller, E.-M., & Zysset, P. K. (2008) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-006-0073-7 · Cited by 117 · cited 1×
“The work of these authors, and (Odgaard et al., 1997; van Rietbergen et al., 1998; van Rietbergen et al., 1996; Matsuura et al., 2008) others, has shown that the fabric tensor is a good measure of the pore structure anisotropy in cancellous bone tissue (Cowin, 1997).”
BackgroundDependence of elastic constants of an anisotropic porous material upon porosity and fabric
Turner, C. H., & Cowin, S. C. (1987) · Journal of Materials Science · doi:10.1007/bf01161180 · Cited by 60 · cited 1×
“The experimental procedure for the fabric measurement of cancellous bone is described by Whitehouse (1974), Harrigan and Mann (1984), Turner and Cowin (1987) and Turner et al. (1990).”
MethodSelf-citation
Cited by
Bone Mechanical Properties in Healthy and Diseased States
Morgan, E. F., Unnikrisnan, G. U., & Hussein, A. I. (2018) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-062117-121139 · Cited by 1,026
“Cowin SC. Fabric dependence of an anisotropic strength criterion.”
InfluentialBiomechanics and Mechanobiology of Trabecular Bone: A Review
Oftadeh, R., Perez-Viloria, M., Villa-Camacho, J. C., Vaziri, A., & Nazarian, A. (2015) · Journal of Biomechanical Engineering · doi:10.1115/1.4029176 · Cited by 547
Tang, S. Y., & Vashishth, D. (2007) · Bone · doi:10.1016/j.bone.2006.10.031 · Cited by 59
Elastic Anisotropy of Trabecular Bone in the Elderly Human Vertebra
Unnikrishnan, G. U., Gallagher, J. A., Hussein, A. I., Barest, G. D., & Morgan, E. F. (2015) · Journal of Biomechanical Engineering · doi:10.1115/1.4031415 · Cited by 13
Metadata
- Authors
- Moesen, M., Cardoso, L., & Cowin, S. C.
- Venue
- Mechanics of Materials
- Publisher
- Elsevier BV
- Published
- 2012-11
- Volume
- 54
- Pages
- 70-83
- ISSN
- 0167-6636 (ISSN-L)
- OpenAlex
- W1985926612
- Cited by
- 49
- References
- 7
- FWCI
- 4.64
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A symmetry invariant formulation of the relationship between the elasticity tensor and the fabric tensor. https://app.cochat.ai/papers/10.1016/j.mechmat.2012.07.004
- The paper
- Moesen, M., Cardoso, L., & Cowin, S. C. (2012). A symmetry invariant formulation of the relationship between the elasticity tensor and the fabric tensor. Mechanics of Materials. https://doi.org/10.1016/j.mechmat.2012.07.004
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.