Promoting lithium polysulfide/sulfide redox kinetics by the catalyzing of zinc sulfide for high performance lithium-sulfur battery
The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Abstract
Abstract Entrapping polysulfide from dissolution into electrolyte by strong chemisorption of polar materials has been widely reported in lithium-sulfur (Li-S) battery. Here, for the first time, zinc sulfide (ZnS) was demonstrated as an activation catalyst in Li-S battery to suppress the soluble polysulfide shuttle effect by powering kinetics redox reactions of lithium polysulfide/sulfide. Kinetic analyses comprehensively identify that ZnS not only facilities polysulfide redox kinetics in liquid phase (Li2S8→Li2S6→Li2S4), but also promotes the effective decompositions of lithium sulfide (Li2S). Furthermore, first-principle calculations confirm that the low lithium ion diffusion barrier on the surface of ZnS promotes the redox reaction between lithium ion and sulfur species; and the low migration energy barrier of polysulfide on its surface guarantees the fast diffussion of polysulfides from the ZnS surface to the nearby conductive substrate, thus effectively smoothes polysulfides’ entrapping-diffusion-conversion mechanism across the ZnS interface, resulting in the highly reversible electrochemical performance. As evidenced by the ex situ SEM and visible experiment, the reaction between migrated sulfur species and lithium anode was significantly alleviated, and the insulating Li2S/Li2S2 was uniformly deposited on the ZnS-CB/S cathode. This ZnS cathode based Li-S battery exhibits outstanding performance including an excellent retained discharge specific capacity of 589 mA h gsul−1 with the high sulfur loading of 7 mg cm−2 (200 cycles) and extended cycling stability at the high current rate of 2 C, 5 C (632, 388 mA h gsul−1 after 1000 cycles).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Semiempirical GGA‐type density functional constructed with a long‐range dispersion correction
Grimme, S. (2006) · Journal of Computational Chemistry · doi:10.1002/jcc.20495 · Cited by 31,038
An all-electron numerical method for solving the local density functional for polyatomic molecules
Delley, B. (1990) · The Journal of Chemical Physics · doi:10.1063/1.458452 · Cited by 10,536
Henkelman, G., & Jónsson, H. (2000) · The Journal of Chemical Physics · doi:10.1063/1.1323224 · Cited by 9,523
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Lithium–Sulfur Batteries: Progress and Prospects
Manthiram, A., Chung, S., & Zu, C. (2015) · Advanced Materials · doi:10.1002/adma.201405115 · Cited by 1,620
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Tao, X., Wang, J., Liu, C., Wang, H., Yao, H., Zheng, G., Seh, Z. W., Cai, Q., Li, W., Zhou, G., et al. (2016) · Nature Communications · doi:10.1038/ncomms11203 · Cited by 1,391
Catalytic oxidation of Li 2 S on the surface of metal sulfides for Li−S batteries
Zhou, G., Tian, H., Jin, Y., Tao, X., Liu, B., Zhang, R., Seh, Z. W., Zhuo, D., Liu, Y., Sun, J., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615837114 · Cited by 1,278
Lithium sulfur batteries, a mechanistic review
Wild, M., O'Neill, L., Zhang, T., Purkayastha, R., Minton, G., Marinescu, M., & Offer, G. J. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01388g · Cited by 1,107
Zhou, T., Lv, W., Li, J., Zhou, G., Zhao, Y., Fan, S., Liu, B., Li, B., Kang, F., & Yang, Q.-H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01430a · Cited by 1,056
Mechanism and Kinetics of Li2S Precipitation in Lithium–Sulfur Batteries
Fan, F. Y., Carter, W. C., & Chiang, Y. (2015) · Advanced Materials · doi:10.1002/adma.201501559 · Cited by 987
Lin, H., Yang, L., Jiang, X., Li, G., Zhang, T., Yao, Q., Zheng, G. W., & Lee, J. Y. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01047h · Cited by 952
Electrocatalytic Polysulfide Traps for Controlling Redox Shuttle Process of Li–S Batteries
Al Salem, H., Babu, G., V. Rao, C., & Arava, L. M. R. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04472 · Cited by 753
Huang, J.-Q., Zhang, Q., & Wei, F. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.008 · Cited by 665
Hagen, M., Hanselmann, D., Ahlbrecht, K., Maça, R., Gerber, D., & Tübke, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401986 · Cited by 636
Multi‐Functional Layered WS2 Nanosheets for Enhancing the Performance of Lithium–Sulfur Batteries
Lei, T., Chen, W., Huang, J., Yan, C., Sun, H., Wang, C., Zhang, W., Li, Y., & Xiong, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601843 · Cited by 548
Self-citationHu, H., Han, L., Yu, M., Wang, Z., & Lou, X. W. (. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02903a · Cited by 529
Zhou, G., Zhao, Y., & Manthiram, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402263 · Cited by 502
A graphene-like metallic cathode host for long-life and high-loading lithium–sulfur batteries
Pang, Q., Kundu, D., & Nazar, L. F. (2016) · Materials Horizons · doi:10.1039/c5mh00246j · Cited by 424
Ye, C., Zhang, L., Guo, C., Li, D., Vasileff, A., Wang, H., & Qiao, S. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702524 · Cited by 407
Progress Towards Commercially Viable Li–S Battery Cells
Urbonaite, S., Poux, T., & Novák, P. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500118 · Cited by 406
Multifunctional Co3S4@sulfur nanotubes for enhanced lithium-sulfur battery performance
Pu, J., Shen, Z., Zheng, J., Wu, W., Zhu, C., Zhou, Q., Zhang, H., & Pan, F. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.009 · Cited by 369
Tao, Y., Wei, Y., Liu, Y., Wang, J., Qiao, W., Ling, L., & Long, D. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01662f · Cited by 362
Wang, X., Li, G., Li, J., Zhang, Y., Wook, A., Yu, A., & Chen, Z. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00194g · Cited by 360
Park, J., Yu, B., Park, J. S., Choi, J. W., Kim, C., Sung, Y., & Goodenough, J. B. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602567 · Cited by 348
Chen, T., Ma, L., Cheng, B., Chen, R., Hu, Y., Zhu, G., Wang, Y., Liang, J., Tie, Z., Liu, J., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.064 · Cited by 334
Chen, X., Peng, H.-J., Zhang, R., Hou, T.-Z., Huang, J.-Q., Li, B., & Zhang, Q. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00164 · Cited by 325
Ionic Liquid Electrolytes for Lithium–Sulfur Batteries
Park, J.-W., Ueno, K., Tachikawa, N., Dokko, K., & Watanabe, M. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp408037e · Cited by 317
Xu, J., Zhang, W., Chen, Y. W., Fan, H., Su, D., & Wang, G. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta10272k · Cited by 296
Self-citationReview—Li Metal Anode in Working Lithium-Sulfur Batteries
Cheng, X.-B., Huang, J.-Q., & Zhang, Q. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0111801jes · Cited by 277
Su, D., Kretschmer, K., & Wang, G. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501785 · Cited by 258
Self-citationFan, Y., Yang, Z., Hua, W., Liu, D., Tao, T., Rahman, M. M., Lei, W., Huang, S., & Chen, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602380 · Cited by 253
Low Electrical Percolation Threshold of Silver and Copper Nanowires in Polystyrene Composites
Gelves, G. A., Lin, B., Sundararaj, U., & Haber, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600336 · Cited by 193
Nanostructured cathode materials for lithium–sulfur batteries: progress, challenges and perspectives
Rehman, S., Khan, K., Zhao, Y., & Hou, Y. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10111a · Cited by 189
Hollow cobalt sulfide polyhedra-enabled long-life, high areal-capacity lithium-sulfur batteries
Xu, H., & Manthiram, A. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.007 · Cited by 162
An in-plane heterostructure of graphene and titanium carbide for efficient polysulfide confinement
Zhou, T., Zhao, Y., Zhou, G., Lv, W., Sun, P., Kang, F., Li, B., & Yang, Q.-H. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.07.012 · Cited by 161
In Situ Observation and Electrochemical Study of Encapsulated Sulfur Nanoparticles by MoS2 Flakes
Tang, W., Chen, Z., Tian, B., Lee, H., Zhao, X., Fan, X., Fan, Y., Leng, K., Peng, C., Kim, M., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b05371 · Cited by 157
In situ / operando characterization techniques for rechargeable lithium–sulfur batteries: a review
Tan, J., Liu, D., Xu, X., & Mai, L. (2017) · Nanoscale · doi:10.1039/c7nr06819k · Cited by 134
Co3O4/Co-N-C modified ketjenblack carbon as an advanced electrocatalyst for Al-air batteries
Li, J., Zhou, Z., Liu, K., Li, F., Peng, Z., Tang, Y., & Wang, H. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.01.018 · Cited by 112
Cited by
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Self-citationHost Materials Anchoring Polysulfides in Li–S Batteries Reviewed
Zhou, L., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202001304 · Cited by 516
A Comprehensive Understanding of Lithium–Sulfur Battery Technology
Li, T., Bai, X., Gulzar, U., Bai, Y., Capiglia, C., Deng, W., Zhou, X., Liu, Z., Feng, Z., & Proietti Zaccaria, R. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901730 · Cited by 422
Strategies toward High‐Loading Lithium–Sulfur Battery
Hu, Y., Chen, W., Lei, T., Jiao, Y., Huang, J., Hu, A., Gong, C., Yan, C., Wang, X., & Xiong, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000082 · Cited by 402
Sulfur Reduction Reaction in Lithium–Sulfur Batteries: Mechanisms, Catalysts, and Characterization
Zhou, L., Danilov, D. L., Qiao, F., Wang, J., Li, H., Eichel, R., & Notten, P. H. L. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202202094 · Cited by 343
Metadata
- Authors
- Xu, J., Zhang, W., Fan, H., Cheng, F., Su, D., & Wang, G.
- Venue
- Nano Energy
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 51
- Pages
- 73-82
- ISSN
- 2211-2855 (ISSN-L)
- OpenAlex
- W2807951177
- Cited by
- 422
- References
- 42
- FWCI
- 21.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.