The DOI matches its Crossref record; 431 of the 431 references it cites were found in a registry or an index.
The chemistry of chemical recycling of solid plastic waste via pyrolysis and gasification: State-of-the-art, challenges, and future directions
Open accessAbstract
Abstract Chemical recycling of solid plastic waste (SPW) is a paramount opportunity to reduce marine and land pollution and to enable the incorporation of the circular economy principle in today's society. In addition to more conscious behaviors and wiser product design (“design for recycling”), a key challenge is the identification of the leading recycling technologies, minimizing the global warming potential in an industrially relevant context. Chemical recycling technologies based on pyrolysis and gasification are leading the way because of their robustness and good economics, but an improved understanding of the chemistry and more innovative reactor designs are required to realize a potential reduction of greenhouse gas emissions of more than 100 million tonnes of CO2-eq., primarily by more efficient use of valuable natural resources. The feed flexibility of thermal processes supports the potential of pyrolysis and gasification, however, the strong variability in time and space of blending partners such as multiple and co-polymers, additives, and contaminants (such as inorganic materials) calls for accurate assessment through fundamental experiments and models. Such complex and variable mixtures are strongly sensitive to the process design and conditions: temperature, residence time, heating rates – severity, mixing level, heat and mass transfer strongly affect the thermal degradation of SPW and its selectivity to valuable products. A prerequisite in improving design and performance is the ability to model conversion profiles and product distributions based on accurate rate coefficients for the dominating reaction families established using first-principle derived transport and thermodynamic properties. These models should also help with the “design for recycling” strategy to increase recyclability, for example by identifying additives that make chemical recycling difficult. Fundamental experiments of increased quality (accuracy, integrity, validity, replicability, completeness) together with improved deterministic kinetic models, systematically developed according to the reaction classes and rate rules approach, provide insights to identify optimal process conditions. This will allow shedding some light upon the important pathways involved in the thermal degradation of the feedstock and the formation/disappearance of desired or unwanted products. In parallel, the intrinsic kinetics of the dominating elementary reaction steps should be determined with higher accuracy, moving beyond single step kinetics retrieved from thermogravimetric analysis experiments. Together with more accurate kinetic parameters, better models to account for heat and mass transfer limitations also need to be further developed, since plastic degradation involves at least three phases (solid, liquid, gas), whose interactions should be accounted for in a more rigorous way. Novel experimental approaches (e.g. detailed feedstock and product characterization using comprehensive chromatographic techniques and photoionization mass spectrometry) and available computational tools (e.g. kinetic Monte Carlo, liquid phase, and heterogeneous theoretical kinetics) are needed to tackle these problems and improve our fundamental understanding of chemical recycling of SPW.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 401–431 of 431
Thermally degrading polyethylene studied by means of factor‐jump thermogravimetry
Dickens, B. (1982) · Journal of Polymer Science Polymer Chemistry Edition · doi:10.1002/pol.1982.170200415 · Cited by 43
Can biotechnology turn the tide on plastics?
Brandon, A. M., & Criddle, C. S. (2019) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2019.03.020 · Cited by 43
Rodríguez, E., Palos, R., Gutiérrez, A., Vela, F. J., Arandes, J. M., & Bilbao, J. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b00993 · Cited by 42
Pyrolytic degradation kinetics of HIPS, ABS, PC and their blends with PP and PVC
Rousi, A. T., Vouvoudi, E. C., & Achilias, D. S. (2020) · Thermochimica Acta · doi:10.1016/j.tca.2020.178705 · Cited by 42
Vinu, R., Levine, S. E., Wang, L., & Broadbelt, L. J. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.10.071 · Cited by 41
Bracconi, M., Maestri, M., & Cuoci, A. (2017) · AIChE Journal · doi:10.1002/aic.15441 · Cited by 41
Self-citationDistribution Kinetics for Polymer Mixture Degradation
Madras, G., & McCoy, B. J. (1999) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9805335 · Cited by 40
Temperature‐dependent pyrolytic product evolution profile for polyethylene terephthalate
Hujuri, U., Ghoshal, A. K., & Gumma, S. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39681 · Cited by 40
Eschenbacher, A., Saraeian, A., Jensen, P. A., Shanks, B. H., Li, C., Duus, J. Ø., Smitshuysen, T. E. L., Damsgaard, C. D., Hansen, A. B., Kling, K. I., et al. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124878 · Cited by 39
D’hooge, D. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201800057 · Cited by 38
Self-citationLin, Y., & Yang, M.-H. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.10.018 · Cited by 37
Eschenbacher, A., Goodarzi, F., Saraeian, A., Kegnæs, S., Shanks, B. H., & Jensen, A. D. (2019) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2019.104712 · Cited by 37
Hybrid Poly(aryl ether sulfone amide)s for Advanced Thermoplastic Composites
Gardea, F., Garcı́a, J. M., Boday, D. J., Bajjuri, K. M., Naraghi, M., & Hedrick, J. L. (2014) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201400267 · Cited by 36
Kiparissides, C. A., Krallis, A., Meimaroglou, D., Pladis, P., & Baltsas, A. (2010) · Chemical Engineering & Technology · doi:10.1002/ceat.201000325 · Cited by 35
Nara, S., & Oyama, H. T. (2014) · Polymer Journal · doi:10.1038/pj.2014.21 · Cited by 33
Binary mixture pyrolysis of polystyrene and poly(α-methylstyrene)
Woo, O. S., Kruse, T. M., & Broadbelt, L. J. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00101-4 · Cited by 29
Eschenbacher, A., Saraeian, A., Shanks, B. H., Mentzel, U. V., Jensen, P. A., Henriksen, U. B., Ahrenfeldt, J., & Jensen, A. D. (2020) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2020.104892 · Cited by 28
Wong, S. L., Ngadi, N., Amin, N. A. S., et al. (2015) · Environmental Technology · doi:10.1080/09593330.2015.1068376 · Cited by 25
Singh, R. K., Ruj, B., Sadhukhan, A. K., & Gupta, P. (2020) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-11204-1 · Cited by 25
Grimbley, M. R., & Lehrle, R. S. (1995) · Polymer Degradation and Stability · doi:10.1016/0141-3910(95)00101-q · Cited by 22
Niksiar, A., & Sohrabi, M. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.08.005 · Cited by 21
Witt, M. J. D., & Broadbelt, L. J. (2000) · Energy & Fuels · doi:10.1021/ef990172l · Cited by 21
Eschenbacher, A., Saraeian, A., Shanks, B. H., Jensen, P. A., Henriksen, U. B., Ahrenfeldt, J., & Jensen, A. D. (2020) · Sustainable Energy & Fuels · doi:10.1039/d0se00303d · Cited by 21
O’Reilly, M., & Stubbe, J. (2020) · Biochemistry · doi:10.1021/acs.biochem.0c00457 · Cited by 21
Lomthong, T., Hanphakphoom, S., Kongsaeree, P. T., Srisuk, N., Guicherd, M., Cioci, G., Duquesne, S., Marty, A., & Kitpreechavanich, V. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.06.017 · Cited by 18
A STUDY ON THE PYROLYSIS CHARACTERISTICS OF POLY ( VINYL CHLORIDE )
SoonJeongHong, SeaCheonOh, HaePyeongLee, HeeTaikKim, & KyongOkYoo (1999) · Korean Journal of Chemical Engineering · Cited by 17
Kinetic modeling of the pyrolysis chemistry of fossil and alternative feedstocks
Geem, K. M. V. (2019) · Computer-aided chemical engineering/Computer aided chemical engineering · doi:10.1016/b978-0-444-64087-1.00006-1 · Cited by 12
Eschenbacher, A., Saraeian, A., Shanks, B. H., Mentzel, U. V., Ahrenfeldt, J., Henriksen, U. B., & Jensen, A. D. (2020) · Catalysts · doi:10.3390/catal10070748 · Cited by 12
Eschenbacher, A., Saraeian, A., Shanks, B. H., Mentzel, U. V., Jensen, P. A., Henriksen, U. B., Ahrenfeldt, J., & Jensen, A. D. (2020) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2020.104868 · Cited by 11
Bhaskar, T., Uddin, A., Kaneko, J., Matsui, T., Muto, A., & Sakata, Y. (2004) · Progress in Rubber Plastics and Recycling Technology · doi:10.1177/147776060402000204 · Cited by 7
Pyrolysis of Fiber-Plastic Waste Blends
Kolapkar, S. S. (2018) · Digital Commons - Michigan Tech (Michigan Technological University) · doi:10.37099/mtu.dc.etdr/665 · Cited by 2
Cited by
Kumar, R., Verma, A., Shome, A., Sinha, R., Sinha, S., Jha, P. K., Kumar, R., Kumar, P., Shubham, Das, S., et al. (2021) · Sustainability · doi:10.3390/su13179963 · Cited by 1,111
The world of plastic waste: A review
Nayanathara Thathsarani Pilapitiya, P. G. C., & Ratnayake, A. S. (2024) · Cleaner Materials · doi:10.1016/j.clema.2024.100220 · Cited by 1,034
Managing Plastic Waste─Sorting, Recycling, Disposal, and Product Redesign
Lange, J.-P. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c05013 · Cited by 637
Expanding plastics recycling technologies: chemical aspects, technology status and challenges
Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616
Pyrolysis technology for plastic waste recycling: A state-of-the-art review
Dai, L., Zhou, N., Lv, Y., Cheng, Y., Wang, Y., Liu, Y., Cobb, K., Chen, P., Lei, H., & Ruan, R. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101021 · Cited by 485
Metadata
- Authors
- Dogu, O., Pelucchi, M., Van de Vijver, R., Van Steenberge, P. H. M., D'hooge, D. R., Cuoci, A., Mehl, M., Frassoldati, A., Faravelli, T., & Van Geem, K. M.
- Venue
- Progress in Energy and Combustion Science
- Publisher
- Elsevier BV
- Published
- 2021-05
- Volume
- 84
- Pages
- 100901
- ISSN
- 0360-1285 (ISSN-L)
- OpenAlex
- W3129319549
- Cited by
- 698
- References
- 431
- FWCI
- 30.80
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.