The DOI matches its Crossref record; 431 of the 431 references it cites were found in a registry or an index.
The chemistry of chemical recycling of solid plastic waste via pyrolysis and gasification: State-of-the-art, challenges, and future directions
Open accessAbstract
Abstract Chemical recycling of solid plastic waste (SPW) is a paramount opportunity to reduce marine and land pollution and to enable the incorporation of the circular economy principle in today's society. In addition to more conscious behaviors and wiser product design (“design for recycling”), a key challenge is the identification of the leading recycling technologies, minimizing the global warming potential in an industrially relevant context. Chemical recycling technologies based on pyrolysis and gasification are leading the way because of their robustness and good economics, but an improved understanding of the chemistry and more innovative reactor designs are required to realize a potential reduction of greenhouse gas emissions of more than 100 million tonnes of CO2-eq., primarily by more efficient use of valuable natural resources. The feed flexibility of thermal processes supports the potential of pyrolysis and gasification, however, the strong variability in time and space of blending partners such as multiple and co-polymers, additives, and contaminants (such as inorganic materials) calls for accurate assessment through fundamental experiments and models. Such complex and variable mixtures are strongly sensitive to the process design and conditions: temperature, residence time, heating rates – severity, mixing level, heat and mass transfer strongly affect the thermal degradation of SPW and its selectivity to valuable products. A prerequisite in improving design and performance is the ability to model conversion profiles and product distributions based on accurate rate coefficients for the dominating reaction families established using first-principle derived transport and thermodynamic properties. These models should also help with the “design for recycling” strategy to increase recyclability, for example by identifying additives that make chemical recycling difficult. Fundamental experiments of increased quality (accuracy, integrity, validity, replicability, completeness) together with improved deterministic kinetic models, systematically developed according to the reaction classes and rate rules approach, provide insights to identify optimal process conditions. This will allow shedding some light upon the important pathways involved in the thermal degradation of the feedstock and the formation/disappearance of desired or unwanted products. In parallel, the intrinsic kinetics of the dominating elementary reaction steps should be determined with higher accuracy, moving beyond single step kinetics retrieved from thermogravimetric analysis experiments. Together with more accurate kinetic parameters, better models to account for heat and mass transfer limitations also need to be further developed, since plastic degradation involves at least three phases (solid, liquid, gas), whose interactions should be accounted for in a more rigorous way. Novel experimental approaches (e.g. detailed feedstock and product characterization using comprehensive chromatographic techniques and photoionization mass spectrometry) and available computational tools (e.g. kinetic Monte Carlo, liquid phase, and heterogeneous theoretical kinetics) are needed to tackle these problems and improve our fundamental understanding of chemical recycling of SPW.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Plastic waste inputs from land into the ocean
Jambeck, J. R., Geyer, R., Wilcox, C., Siegler, T. R., Perryman, M., Andrady, A., Narayan, R., & Law, K. L. (2015) · Science · doi:10.1126/science.1260352 · Cited by 13,163
Exact stochastic simulation of coupled chemical reactions
Gillespie, D. T. (1977) · The Journal of Physical Chemistry · doi:10.1021/j100540a008 · Cited by 10,136
Microplastics in the marine environment
Andrady, A. L. (2011) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2011.05.030 · Cited by 8,105
Accumulation and fragmentation of plastic debris in global environments
Barnes, D. K. A., Galgani, F., Thompson, R. C., & Barlaz, M. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0205 · Cited by 6,126
Gillespie, D. T. (1976) · Journal of Computational Physics · doi:10.1016/0021-9991(76)90041-3 · Cited by 6,029
Microplastics as contaminants in the marine environment: A review
Cole, M., Lindeque, P., Halsband, C., & Galloway, T. S. (2011) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2011.09.025 · Cited by 6,023
Eriksen, M., Lebreton, L. C. M., Carson, H. S., Thiel, M., Moore, C. J., Borerro, J. C., Galgani, F., Ryan, P. G., & Reisser, J. (2014) · PLoS ONE · doi:10.1371/journal.pone.0111913 · Cited by 4,710
The pollution of the marine environment by plastic debris: a review.
Derraik, J. G. B. (2002) · Marine Pollution Bulletin · doi:10.1016/s0025-326x(02)00220-5 · Cited by 4,042
Hahladakis, J. N., Velis, C. A., Weber, R., Iacovidou, E., & Purnell, P. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.10.014 · Cited by 3,873
Horton, A. A., Walton, A., Spurgeon, D. J., Lahive, E., & Svendsen, C. (2017) · Science of The Total Environment · doi:10.1016/j.scitotenv.2017.01.190 · Cited by 3,756
D.P. (1970) · Journal of Molecular Structure · doi:10.1016/0022-2860(70)85028-1 · Cited by 3,578
(2015) · Springer eBooks · doi:10.1007/978-3-319-16510-3 · Cited by 3,502
A bacterium that degrades and assimilates poly(ethylene terephthalate)
Yoshida, S., Hiraga, K., Takehana, T., Taniguchi, I., Yamaji, H., Maeda, Y., Toyohara, K., Miyamoto, K., Kimura, Y., & Oda, K. (2016) · Science · doi:10.1126/science.aad6359 · Cited by 3,367
Mechanical and chemical recycling of solid plastic waste
Ragaert, K., Delva, L., & Van Geem, K. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.044 · Cited by 3,276
Biological degradation of plastics: A comprehensive review
Shah, A. A., Hasan, F., Hameed, A., & Ahmed, S. (2008) · Biotechnology Advances · doi:10.1016/j.biotechadv.2007.12.005 · Cited by 2,765
Lignocellulosic biomass pyrolysis mechanism: A state-of-the-art review
Wang, S., Dai, G., Yang, H., & Luo, Z. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.05.004 · Cited by 2,595
Recycling and recovery routes of plastic solid waste (PSW): A review
Al-Salem, S. M., Lettieri, P., & Baeyens, J. (2009) · Waste Management · doi:10.1016/j.wasman.2009.06.004 · Cited by 2,404
Atmospheric transport and deposition of microplastics in a remote mountain catchment
Allen, S., Allen, D., Phoenix, V. R., Le Roux, G., Durántez Jiménez, P., Simonneau, A., Binet, S., & Galop, D. (2019) · Nature Geoscience · doi:10.1038/s41561-019-0335-5 · Cited by 2,319
An engineered PET depolymerase to break down and recycle plastic bottles
Tournier, V., Topham, C. M., Gilles, A., David, B., Folgoas, C., Moya-Leclair, E., Kamionka, E., Desrousseaux, M.-L., Texier, H., Gavalda, S., et al. (2020) · Nature · doi:10.1038/s41586-020-2149-4 · Cited by 2,176
General treatment of the thermogravimetry of polymers
Flynn, J. H., & Wall, L. A. (1966) · Journal of Research of the National Bureau of Standards Section A: Physics and Chemistry · doi:10.6028/jres.070a.043 · Cited by 2,161
Peterson, A. A., Vogel, F., Lachance, R. P., Fröling, M., Antal, Jr., & Tester, J. W. (2008) · Energy & Environmental Science · doi:10.1039/b810100k · Cited by 2,132
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
Chemical recycling of waste plastics for new materials production
Rahimi, A., & García, J. M. (2017) · Nature Reviews Chemistry · doi:10.1038/s41570-017-0046 · Cited by 2,121
Stochastic Simulation of Chemical Kinetics
Gillespie, D. T. (2007) · Annual Review of Physical Chemistry · doi:10.1146/annurev.physchem.58.032806.104637 · Cited by 2,115
Microplastics in wastewater treatment plants: Detection, occurrence and removal
Sun, J., Dai, X., Wang, Q., van Loosdrecht, M. C. M., & Ni, B.-J. (2019) · Water Research · doi:10.1016/j.watres.2018.12.050 · Cited by 2,025
Tokiwa, Y., Calabia, B. P., Ugwu, C. U., & Aiba, S. (2009) · International Journal of Molecular Sciences · doi:10.3390/ijms10093722 · Cited by 1,782
Duis, K., & Coors, A. (2016) · Environmental Sciences Europe · doi:10.1186/s12302-015-0069-y · Cited by 1,782
Evaluating scenarios toward zero plastic pollution
Lau, W. W. Y., Shiran, Y., Bailey, R. M., Cook, E., Stuchtey, M. R., Koskella, J., Velis, C. A., Godfrey, L., Boucher, J., Murphy, M. B., et al. (2020) · Science · doi:10.1126/science.aba9475 · Cited by 1,766
Libra, J. A., Ro, K. S., Kammann, C., Funke, A., Berge, N. D., Neubauer, Y., Titirici, M.-M., Fühner, C., Bens, O., Kern, J., et al. (2011) · Biofuels · doi:10.4155/bfs.10.81 · Cited by 1,756
Modeling chemical and physical processes of wood and biomass pyrolysis
DIBLASI, C. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2006.12.001 · Cited by 1,752
Inertia and driving force of chemical reactions
Evans, M. G., & Polanyi, M. (1938) · Transactions of the Faraday Society · doi:10.1039/tf9383400011 · Cited by 1,679
Progress and recent trends in biofuels
DEMIRBAS, A. (2007) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2006.06.001 · Cited by 1,587
Chemical kinetic modeling of hydrocarbon combustion
Westbrook, C. K., & Dryer, F. L. (1984) · Progress in Energy and Combustion Science · doi:10.1016/0360-1285(84)90118-7 · Cited by 1,570
Talvitie, J., Mikola, A., Koistinen, A., & Setälä, O. (2017) · Water Research · doi:10.1016/j.watres.2017.07.005 · Cited by 1,558
The foundations of chemical kinetics
(1960) · Journal of the Franklin Institute · doi:10.1016/0016-0032(60)90305-7 · Cited by 1,451
Occurrence and distribution of microplastics in marine sediments along the Belgian coast
Claessens, M., Meester, S. D., Landuyt, L. V., Clerck, K. D., & Janssen, C. R. (2011) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2011.06.030 · Cited by 1,428
Polymer biodegradation: Mechanisms and estimation techniques – A review
Lucas, N., Bienaime, C., Belloy, C., Queneudec, M., Silvestre, F., & Nava-Saucedo, J.-E. (2008) · Chemosphere · doi:10.1016/j.chemosphere.2008.06.064 · Cited by 1,384
White and wonderful? Microplastics prevail in snow from the Alps to the Arctic
Bergmann, M., Mützel, S., Primpke, S., Tekman, M. B., Trachsel, J., & Gerdts, G. (2019) · Science Advances · doi:10.1126/sciadv.aax1157 · Cited by 1,359
Process and technological aspects of municipal solid waste gasification. A review
Arena, U. (2012) · Waste Management · doi:10.1016/j.wasman.2011.09.025 · Cited by 1,349
Lares, M., Ncibi, M. C., Sillanpää, M., & Sillanpää, M. (2018) · Water Research · doi:10.1016/j.watres.2018.01.049 · Cited by 1,320
Thompson, R. C., Swan, S. H., Moore, C. J., & vom Saal, F. S. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2009.0054 · Cited by 1,294
Strategies to reduce the global carbon footprint of plastics
Zheng, J., & Suh, S. (2019) · Nature Climate Change · doi:10.1038/s41558-019-0459-z · Cited by 1,252
Xanthos, D., & Walker, T. R. (2017) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2017.02.048 · Cited by 1,229
Recycling of plastic solid waste: A state of art review and future applications
Singh, N., Hui, D., Singh, R., Ahuja, I. P. S., Feo, L., & Fraternali, F. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.09.013 · Cited by 1,211
A review on thermal and catalytic pyrolysis of plastic solid waste (PSW)
Al-Salem, S. M., Antelava, A., Constantinou, A., Manos, G., & Dutta, A. (2017) · Journal of Environmental Management · doi:10.1016/j.jenvman.2017.03.084 · Cited by 1,200
Bouwmeester, H., Hollman, P. C. H., & Peters, R. J. B. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b01090 · Cited by 1,180
Demirbas, A. (2005) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2005.02.002 · Cited by 1,148
Biobased plastics and bionanocomposites: Current status and future opportunities
Reddy, M. M., Vivekanandhan, S., Misra, M., Bhatia, S. K., & Mohanty, A. K. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.006 · Cited by 1,080
Characterization and engineering of a plastic-degrading aromatic polyesterase
Austin, H. P., Allen, M. D., Donohoe, B. S., Rorrer, N. A., Kearns, F. L., Silveira, R. L., Pollard, B. C., Dominick, G., Duman, R., El Omari, K., et al. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1718804115 · Cited by 1,079
Microplastics and mesoplastics in fish from coastal and fresh waters of China
Jabeen, K., Su, L., Li, J., Yang, D., Tong, C., Mu, J., & Shi, H. (2017) · Environmental Pollution · doi:10.1016/j.envpol.2016.11.055 · Cited by 1,038
Plastics derived from biological sources: present and future: a technical and environmental review
Chen, G.-Q., & Patel, M. K. (2012) · Chemical Reviews · doi:10.1021/cr200162d · Cited by 997
Catalytic pyrolysis of plastic waste: A review
Miandad, R., Barakat, M. A., Aburiazaiza, A. S., Rehan, M., & Nizami, A. S. (2016) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2016.06.022 · Cited by 964
Catalysis as an Enabling Science for Sustainable Polymers
Zhang, X., Fevre, M., Jones, G. O., & Waymouth, R. M. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00329 · Cited by 936
Plastics: Environmental and Biotechnological Perspectives on Microbial Degradation
Danso, D., Chow, J., & Streit, W. R. (2019) · Applied and Environmental Microbiology · doi:10.1128/aem.01095-19 · Cited by 918
A review on co-pyrolysis of biomass: An optional technique to obtain a high-grade pyrolysis oil
Abnisa, F., & Wan Daud, W. M. A. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.07.007 · Cited by 903
Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
Thermal Degradation of Organic Polymers
Madorsky, S. L. (1964) · Medical Entomology and Zoology · Cited by 869
Microbial enzymes for the recycling of recalcitrant petroleum‐based plastics: how far are we?
Wei, R., & Zimmermann, W. (2017) · Microbial Biotechnology · doi:10.1111/1751-7915.12710 · Cited by 865
Advances and approaches for chemical recycling of plastic waste
Thiounn, T., & Smith, R. C. (2020) · Journal of Polymer Science · doi:10.1002/pol.20190261 · Cited by 857
Characterization and prediction of biomass pyrolysis products
Neves, D., Thunman, H., Matos, A., Tarelho, L., & Gómez-Barea, A. (2011) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2011.01.001 · Cited by 856
Recent advances in the gasification of waste plastics. A critical overview
Lopez, G., Artetxe, M., Amutio, M., Alvarez, J., Bilbao, J., & Olazar, M. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.032 · Cited by 852
Gu, J.-D. (2003) · International Biodeterioration & Biodegradation · doi:10.1016/s0964-8305(02)00177-4 · Cited by 819
Akdogan, Z., & Guven, B. (2019) · Environmental Pollution · doi:10.1016/j.envpol.2019.113011 · Cited by 815
Structural insight into molecular mechanism of poly(ethylene terephthalate) degradation
Joo, S., Cho, I. J., Seo, H., Son, H. F., Sagong, H.-Y., Shin, T. J., Choi, S. Y., Lee, S. Y., & Kim, K.-J. (2018) · Nature Communications · doi:10.1038/s41467-018-02881-1 · Cited by 802
Microbial degradation and deterioration of polyethylene - a review
Restrepo-Flórez, J.-M., Bassi, A., & Thompson, M. R. (2014) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2013.12.014 · Cited by 778
Pyrolysis of plastic waste: Opportunities and challenges
Qureshi, M. S., Oasmaa, A., Pihkola, H., Deviatkin, I., Tenhunen, A., Mannila, J., Minkkinen, H., Pohjakallio, M., & Laine-Ylijoki, J. (2020) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2020.104804 · Cited by 778
Peterson, J. D., Vyazovkin, S., & Wight, C. A. (2001) · Macromolecular Chemistry and Physics · doi:10.1002/1521-3935(20010301)202:6<775::aid-macp775>3.0.co;2-g · Cited by 774
Recycling of Polymers: A Review
Ignatyev, I. A., Thielemans, W., & Vander Beke, B. (2014) · ChemSusChem · doi:10.1002/cssc.201300898 · Cited by 753
Chemical recycling of plastic wastes made from polyethylene (LDPE and HDPE) and polypropylene (PP)
Achilias, D. S., Roupakias, C., Megalokonomos, P., Lappas, A. A., & Antonakou, Ε. V. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.06.076 · Cited by 730
A review of hydrothermal biomass processing
Tekin, K., Karagöz, S., & Bektaş, S. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.216 · Cited by 730
Aboulkas, A., El harfi, K., & El Bouadili, A. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.12.017 · Cited by 726
Progress in biofuel production from gasification
Sikarwar, V. S., Zhao, M., Fennell, P. S., Shah, N., & Anthony, E. J. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.04.001 · Cited by 724
Yang, Y., Yang, J., Wu, W.-M., Zhao, J., Song, Y., Gao, L., Yang, R., & Jiang, L. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b02661 · Cited by 720
A synthetic polymer system with repeatable chemical recyclability
Zhu, J.-B., Watson, E. M., Tang, J., & Chen, E. Y.-X. (2018) · Science · doi:10.1126/science.aar5498 · Cited by 709
New concepts in biomass gasification
Heidenreich, S., & Foscolo, P. U. (2015) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2014.06.002 · Cited by 709
Current state and future prospects of plastic waste as source of fuel: A review
Wong, S. L., Ngadi, N., Abdullah, T. A. T., & Inuwa, I. M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.063 · Cited by 695
Interactions between trace metals and plastic production pellets under estuarine conditions
Holmes, L. A., Turner, A., & Thompson, R. C. (2014) · Marine Chemistry · doi:10.1016/j.marchem.2014.06.001 · Cited by 689
Onwudili, J. A., Insura, N., & Williams, P. T. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2009.07.008 · Cited by 681
Hong, M., & Chen, E. Y.-X. (2016) · Nature Chemistry · doi:10.1038/nchem.2391 · Cited by 677
Enfrin, M., Dumée, L. F., & Lee, J. (2019) · Water Research · doi:10.1016/j.watres.2019.06.049 · Cited by 676
Pathways of marine debris derived from trajectories of Lagrangian drifters
Maximenko, N., Hafner, J., & Niiler, P. (2012) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2011.04.016 · Cited by 675
Reaction mechanisms and multi-scale modelling of lignocellulosic biomass pyrolysis
Anca-Couce, A. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.10.002 · Cited by 664
Bisphenol A in hazardous waste landfill leachates
Yamamoto, T., Yasuhara, A., Shiraishi, H., & Nakasugi, O. (2001) · Chemosphere · doi:10.1016/s0045-6535(00)00079-5 · Cited by 662
Lifetime prediction of biodegradable polymers
Laycock, B., Nikolić, M., Colwell, J. M., Gauthier, E., Halley, P., Bottle, S., & George, G. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.02.004 · Cited by 662
Nanoplastics in the Aquatic Environment. Critical Review
Koelmans, A. A., Besseling, E., & Shim, W. J. (2015) · Marine Anthropogenic Litter · doi:10.1007/978-3-319-16510-3_12 · Cited by 648
Biodegradation of PET: Current Status and Application Aspects
Taniguchi, I., Yoshida, S., Hiraga, K., Miyamoto, K., Kimura, Y., & Oda, K. (2019) · ACS Catalysis · doi:10.1021/acscatal.8b05171 · Cited by 646
Kunwar, B., Cheng, H. N., Chandrashekaran, S. R., & Sharma, B. K. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.015 · Cited by 639
Narancic, T., Verstichel, S., Reddy Chaganti, S., Morales-Gamez, L., Kenny, S. T., De Wilde, B., Babu Padamati, R., & O’Connor, K. E. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b02963 · Cited by 632
Occurrence and spatial distribution of microplastics in sediments from Norderney
Dekiff, J. H., Remy, D., Klasmeier, J., & Fries, E. (2014) · Environmental Pollution · doi:10.1016/j.envpol.2013.11.019 · Cited by 630
Biodegradation of Agricultural Plastic Films: A Critical Review
Kyrikou, I., & Briassoulis, D. (2007) · Journal of Polymers and the Environment · doi:10.1007/s10924-007-0053-8 · Cited by 627
Microplastics in aquatic environments: implications for Canadian ecosystems
Anderson, J. C., Park, B. J., & Palace, V. P. (2016) · Environmental Pollution · doi:10.1016/j.envpol.2016.06.074 · Cited by 624
Hydrophobic substrate utilisation by the yeast , and its potential applications
FICKERS, P., BENETTI, P., WACHE, Y., MARTY, A., MAUERSBERGER, S., SMIT, M., & NICAUD, J. (2005) · FEMS Yeast Research · doi:10.1016/j.femsyr.2004.09.004 · Cited by 622
New perspectives in plastic biodegradation
Sivan, A. (2011) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2011.01.013 · Cited by 621
Wender, I. (1996) · Fuel Processing Technology · doi:10.1016/s0378-3820(96)01048-x · Cited by 595
Dimitriadis, A., & Bezergianni, S. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.120 · Cited by 585
Effects of microplastics on wastewater and sewage sludge treatment and their removal: A review
Zhang, Z., & Chen, Y. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122955 · Cited by 585
Sensitivity analysis of complex kinetic systems. Tools and applications
Tur�nyi, T. (1990) · Journal of Mathematical Chemistry · doi:10.1007/bf01166355 · Cited by 572
A Review of Plastic Waste Biodegradation
Zheng, Y., Yanful, E. K., & Bassi, A. S. (2005) · Critical Reviews in Biotechnology · doi:10.1080/07388550500346359 · Cited by 552
Structural insight into catalytic mechanism of PET hydrolase
Han, X., Liu, W., Huang, J.-W., Ma, J., Zheng, Y., Ko, T.-P., Xu, L., Cheng, Y.-S., Chen, C.-C., & Guo, R.-T. (2017) · Nature Communications · doi:10.1038/s41467-017-02255-z · Cited by 544
Nano-plastics in the aquatic environment
Mattsson, K., Hansson, L.-A., & Cedervall, T. (2015) · Environmental Science: Processes & Impacts · doi:10.1039/c5em00227c · Cited by 543
Recycling of waste from polymer materials: An overview of the recent works
Hamad, K., Kaseem, M., & Deri, F. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.09.025 · Cited by 537
Zhou, H., Meng, A., Long, Y., Li, Q., & Zhang, Y. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.04.024 · Cited by 537
Prospects for microbiological solutions to environmental pollution with plastics
Krueger, M. C., Harms, H., & Schlosser, D. (2015) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-015-6879-4 · Cited by 534
Potential of pyrolysis processes in the waste management sector
Czajczyńska, D., Anguilano, L., Ghazal, H., Krzyżyńska, R., Reynolds, A. J., Spencer, N., & Jouhara, H. (2017) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2017.06.003 · Cited by 531
Al-Salem, S. M., Lettieri, P., & Baeyens, J. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.09.001 · Cited by 528
(2017) · Elsevier eBooks · doi:10.1016/c2015-0-04315-5 · Cited by 528
Characterization and engineering of a two-enzyme system for plastics depolymerization
Knott, B. C., Erickson, E., Allen, M. D., Gado, J. E., Graham, R., Kearns, F. L., Pardo, I., Topuzlu, E., Anderson, J. J., Austin, H. P., et al. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2006753117 · Cited by 526
Polyethylene bio-degradation by caterpillars of the wax moth Galleria mellonella
Bombelli, P., Howe, C. J., & Bertocchini, F. (2017) · Current Biology · doi:10.1016/j.cub.2017.02.060 · Cited by 523
Environmental occurrences, fate, and impacts of microplastics
Wu, P., Huang, J., Zheng, Y., Yang, Y., Zhang, Y., He, F., Chen, H., Quan, G., Yan, J., Li, T., et al. (2019) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2019.109612 · Cited by 515
Plastics recycling with a difference
Sardon, H., & Dove, A. P. (2018) · Science · doi:10.1126/science.aat4997 · Cited by 512
Effect of plastic waste types on pyrolysis liquid oil
Miandad, R., Barakat, M. A., Aburiazaiza, A. S., Rehan, M., Ismail, I. M. I., & Nizami, A. S. (2017) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2016.09.017 · Cited by 505
Bio-based plastics - A review of environmental, social and economic impact assessments
Spierling, S., Knüpffer, E., Behnsen, H., Mudersbach, M., Krieg, H., Springer, S., Albrecht, S., Herrmann, C., & Endres, H.-J. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.014 · Cited by 502
Conley, K., Clum, A., Deepe, J., Lane, H., & Beckingham, B. (2019) · Water Research X · doi:10.1016/j.wroa.2019.100030 · Cited by 501
Large Eddy Simulations of gaseous flames in gas turbine combustion chambers
Gicquel, L. Y. M., Staffelbach, G., & Poinsot, T. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2012.04.004 · Cited by 499
Modeling and simulation of combustion processes of charring and non-charring solid fuels
Di Blasi, C. (1993) · Progress in Energy and Combustion Science · doi:10.1016/0360-1285(93)90022-7 · Cited by 494
A review on tertiary recycling of high-density polyethylene to fuel
Kumar, S., Panda, A. K., & Singh, R. K. (2011) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2011.05.005 · Cited by 493
Structure of the plastic-degrading Ideonella sakaiensis MHETase bound to a substrate
Palm, G. J., Reisky, L., Böttcher, D., Müller, H., Michels, E. A. P., Walczak, M. C., Berndt, L., Weiss, M. S., Bornscheuer, U. T., & Weber, G. (2019) · Nature Communications · doi:10.1038/s41467-019-09326-3 · Cited by 491
Life-cycle energy and greenhouse gas emission impacts of different corn ethanol plant types
Wang, M., Wu, M., & Huo, H. (2007) · Environmental Research Letters · doi:10.1088/1748-9326/2/2/024001 · Cited by 483
Reactor technologies for biodiesel production and processing: A review
Tabatabaei, M., Aghbashlo, M., Dehhaghi, M., Panahi, H. K. S., Mollahosseini, A., Hosseini, M., & Soufiyan, M. M. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.06.001 · Cited by 483
(2006) · Wiley eBooks · doi:10.1002/0470021543 · Cited by 482
Sharifzadeh, M., Sadeqzadeh, M., Guo, M., Borhani, T. N., Murthy Konda, N. V. S. N., Garcia, M. C., Wang, L., Hallett, J., & Shah, N. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.10.006 · Cited by 473
Ranzi, E., Dente, M., Goldaniga, A., Bozzano, G., & Faravelli, T. (2001) · Progress in Energy and Combustion Science · doi:10.1016/s0360-1285(00)00013-7 · Cited by 468
Self-citationPyrolysis Study of Polypropylene and Polyethylene Into Premium Oil Products
Ahmad, I., Khan, M. I., Khan, H., Ishaq, M., Tariq, R., Gul, K., & Ahmad, W. (2015) · International Journal of Green Energy · doi:10.1080/15435075.2014.880146 · Cited by 463
Kinetic study on the thermal degradation of polypropylene and polyethylene
Bockhorn, H., Hornung, A., Hornung, U., & Schawaller, D. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(98)00131-4 · Cited by 461
Evidence of microplastics in samples of zooplankton from Portuguese coastal waters
Frias, J. P. G. L., Otero, V., & Sobral, P. (2014) · Marine Environmental Research · doi:10.1016/j.marenvres.2014.01.001 · Cited by 458
Serrano, D. P., Aguado, J., & Escola, J. M. (2012) · ACS Catalysis · doi:10.1021/cs3003403 · Cited by 457
Technologies for chemical recycling of household plastics – a technical review and TRL assessment
Solis, M., & Silveira, S. (2020) · Waste Management · doi:10.1016/j.wasman.2020.01.038 · Cited by 451
Nabavi-Pelesaraei, A., Bayat, R., Hosseinzadeh-Bandbafha, H., Afrasyabi, H., & Chau, K.-W. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.01.172 · Cited by 449
Life cycle assessments of biodegradable, commercial biopolymers—A critical review
Yates, M. R., & Barlow, C. Y. (2013) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2013.06.010 · Cited by 441
Jung, S.-H., Cho, M.-H., Kang, B.-S., & Kim, J.-S. (2010) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.10.009 · Cited by 440
Recycling of bioplastics, their blends and biocomposites: A review
Soroudi, A., & Jakubowicz, I. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.07.025 · Cited by 432
Mueller, R.-J. (2006) · Process Biochemistry · doi:10.1016/j.procbio.2006.05.018 · Cited by 428
Fluidised bed pyrolysis of low density polyethylene to produce petrochemical feedstock
Williams, P. T., & Williams, E. A. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00011-x · Cited by 424
Removal of microplastics in municipal sewage from China's largest water reclamation plant
Yang, L., Li, K., Cui, S., Kang, Y., An, L., & Lei, K. (2019) · Water Research · doi:10.1016/j.watres.2019.02.046 · Cited by 413
Sadrameli, S. M. (2016) · Fuel · doi:10.1016/j.fuel.2016.01.047 · Cited by 401
A technical review of bioenergy and resource recovery from municipal solid waste
Nanda, S., & Berruti, F. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123970 · Cited by 392
Chen, W.-T., Zhang, Y., Zhang, J., Yu, G., Schideman, L. C., Zhang, P., & Minarick, M. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2013.10.111 · Cited by 379
Microplastics in Beaches of the East Frisian Islands Spiekeroog and Kachelotplate
Liebezeit, G., & Dubaish, F. (2012) · Bulletin of Environmental Contamination and Toxicology · doi:10.1007/s00128-012-0642-7 · Cited by 379
Heat transfer and kinetics in the low temperature pyrolysis of solids
Pyle, D. L., & Zaror, C. A. (1984) · Chemical Engineering Science · doi:10.1016/0009-2509(84)80140-2 · Cited by 375
Microplastic Contamination in Aquatic Environments
(2018) · Elsevier eBooks · doi:10.1016/c2016-0-04784-8 · Cited by 372
Thermal degradation of polystyrene
Faravelli, T., Pinciroli, M., Pisano, F., Bozzano, G., Dente, M., & Ranzi, E. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00159-5 · Cited by 370
Self-citationChemical Recycling of Poly(ethylene terephthalate)
Karayannidis, G. P., & Achilias, D. S. (2007) · Macromolecular Materials and Engineering · doi:10.1002/mame.200600341 · Cited by 368
Recycling of Bioplastics: Routes and Benefits
Lamberti, F. M., Román-Ramírez, L. A., & Wood, J. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01795-8 · Cited by 365
Recycling potential of post-consumer plastic packaging waste in Finland
Dahlbo, H., Poliakova, V., Mylläri, V., Sahimaa, O., & Anderson, R. (2018) · Waste Management · doi:10.1016/j.wasman.2017.10.033 · Cited by 364
Catalytic pyrolysis of polyethylene
Bagri, R., & Williams, P. T. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00139-5 · Cited by 362
Principal component analysis of kinetic models
Vajda, S., Valko, P., & Turányi, T. (1985) · International Journal of Chemical Kinetics · doi:10.1002/kin.550170107 · Cited by 359
Matthews, C., Moran, F., & Jaiswal, A. K. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.125263 · Cited by 358
Feedstock recycling of polymers by pyrolysis in a fluidised bed
Kaminsky, W., Predel, M., & Sadiki, A. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2003.05.002 · Cited by 354
Kreiger, M. A., Mulder, M. L., Glover, A. G., & Pearce, J. M. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.02.009 · Cited by 350
Sipra, A. T., Gao, N., & Sarwar, H. (2018) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.02.012 · Cited by 349
The kinetics of the thermal degradation of polystyrene and polyethylene
Anderson, D. A., & Freeman, E. S. (1961) · Journal of Polymer Science · doi:10.1002/pol.1961.1205415920 · Cited by 346
Albertsson, A.-C., & Hakkarainen, M. (2017) · Science · doi:10.1126/science.aap8115 · Cited by 344
Biodegradation of Agricultural Plastic Films: A Critical Review
Kyrikou, I., & Briassoulis, D. (2007) · Journal of Polymers and the Environment · doi:10.1007/s10924-007-0063-6 · Cited by 343
Williams, P. T., & Slaney, E. (2007) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2006.12.002 · Cited by 343
Luís, L. G., Ferreira, P., Fonte, E., Oliveira, M., & Guilhermino, L. (2015) · Aquatic Toxicology · doi:10.1016/j.aquatox.2015.04.018 · Cited by 342
Auger reactors for pyrolysis of biomass and wastes
Campuzano, F., Brown, R. C., & Martínez, J. D. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.12.014 · Cited by 339
Polymer Recycling: Science, Technology and Applications
Scheirs, J. (1998) · Medical Entomology and Zoology · Cited by 338
Graca, B., Szewc, K., Zakrzewska, D., Dołęga, A., & Szczerbowska-Boruchowska, M. (2017) · Environmental Science and Pollution Research · doi:10.1007/s11356-017-8419-5 · Cited by 338
A study of the products of PVC thermal degradation
McNeill, I. C., Memetea, L., & Cole, W. J. (1995) · Polymer Degradation and Stability · doi:10.1016/0141-3910(95)00064-s · Cited by 337
Kinetics of synergistic effects in co-pyrolysis of biomass with plastic wastes
Burra, K. G., & Gupta, A. K. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.03.117 · Cited by 337
Combining Reclaimed PET with Bio-based Monomers Enables Plastics Upcycling
Rorrer, N. A., Nicholson, S., Carpenter, A., Biddy, M. J., Grundl, N. J., & Beckham, G. T. (2019) · Joule · doi:10.1016/j.joule.2019.01.018 · Cited by 328
Plastic pollutants: effective waste management for pollution control and abatement
Rajmohan, K. V. S., Ramya, C., Raja Viswanathan, M., & Varjani, S. (2019) · Current Opinion in Environmental Science & Health · doi:10.1016/j.coesh.2019.08.006 · Cited by 326
Westerhout, R. W. J., Waanders, J., Kuipers, J. A. M., & van Swaaij, W. P. M. (1997) · Industrial & Engineering Chemistry Research · doi:10.1021/ie960501m · Cited by 322
Analysis of Kinetic Reaction Mechanisms
Turányi, T., & Tomlin, A. S. (2014) · Springer eBooks · doi:10.1007/978-3-662-44562-4 · Cited by 318
Miskolczi, N., Angyal, A., Bartha, L., & Valkai, I. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.04.019 · Cited by 315
Fuels from Waste Plastics by Thermal and Catalytic Processes: A Review
Aguado, J., Serrano, D. P., & Escola, J. M. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie800393w · Cited by 311
Worch, J. C., & Dove, A. P. (2020) · ACS Macro Letters · doi:10.1021/acsmacrolett.0c00582 · Cited by 308
Buekens, A. G., & Huang, H. (1998) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(98)00025-1 · Cited by 307
Fast pyrolysis of plastic wastes
Scott, D. S., Czernik, S. R., Piskorz, J., & Radlein, D. S. A. G. (1990) · Energy & Fuels · doi:10.1021/ef00022a013 · Cited by 301
Scott, G. (1992) · Endeavour · doi:10.1016/0160-9327(92)90023-i · Cited by 299
Biocatalysis as a green route for recycling the recalcitrant plastic polyethylene terephthalate
Wei, R., & Zimmermann, W. (2017) · Microbial Biotechnology · doi:10.1111/1751-7915.12714 · Cited by 296
State-of-the-art of fast pyrolysis in IEA bioenergy member countries
Meier, D., van de Beld, B., Bridgwater, A. V., Elliott, D. C., Oasmaa, A., & Preto, F. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.061 · Cited by 295
Dechlorination of fuels in pyrolysis of PVC containing plastic wastes
López, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., & Adrados, A. (2011) · Fuel Processing Technology · doi:10.1016/j.fuproc.2010.05.008 · Cited by 282
Adrados, A., de Marco, I., Caballero, B. M., López, A., Laresgoiti, M. F., & Torres, A. (2012) · Waste Management · doi:10.1016/j.wasman.2011.06.016 · Cited by 275
Al Hosni, A. S., Pittman, J. K., & Robson, G. D. (2019) · Waste Management · doi:10.1016/j.wasman.2019.07.042 · Cited by 274
Kenny, S. T., Runic, J. N., Kaminsky, W., Woods, T., Babu, R. P., Keely, C. M., Blau, W., & O’Connor, K. E. (2008) · Environmental Science & Technology · doi:10.1021/es801010e · Cited by 271
Butler, E., Devlin, G., & McDonnell, K. (2011) · Waste and Biomass Valorization · doi:10.1007/s12649-011-9067-5 · Cited by 270
Population Balance Modeling: Current Status and Future Prospects
Ramkrishna, D., & Singh, M. R. (2014) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-060713-040241 · Cited by 267
Wen, X., Du, C., Xu, P., Zeng, G., Huang, D., Yin, L., Yin, Q., Hu, L., Wan, J., Zhang, J., et al. (2018) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2018.09.043 · Cited by 262
Environmental biodegradation of synthetic polymers II. Biodegradation of different polymer groups
Eubeler, J. P., Bernhard, M., & Knepper, T. P. (2010) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2009.09.005 · Cited by 259
Hong, M., & Chen, E. Y. ‐. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201601092 · Cited by 259
Tomlin, A. S., Turányi, T., & Pilling, M. J. (1997) · Elsevier eBooks · doi:10.1016/s0069-8040(97)80019-2 · Cited by 257
Fonte, E., Ferreira, P., & Guilhermino, L. (2016) · Aquatic Toxicology · doi:10.1016/j.aquatox.2016.09.015 · Cited by 253
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.06.046 · Cited by 253
Narancic, T., & O'Connor, K. E. (2019) · Microbiology · doi:10.1099/mic.0.000749 · Cited by 252
Mechanical reprocessing of polyolefin waste: A review
Yin, S., Tuladhar, R., Shi, F., Shanks, R. A., Combe, M., & Collister, T. (2015) · Polymer Engineering & Science · doi:10.1002/pen.24182 · Cited by 246
Fickers, P., Marty, A., & Nicaud, J. M. (2011) · Biotechnology Advances · doi:10.1016/j.biotechadv.2011.04.005 · Cited by 246
Characteristics and the recovery potential of plastic wastes obtained from landfill mining
Zhou, C., Fang, W., Xu, W., Cao, A., & Wang, R. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.05.083 · Cited by 245
Ali, K. A., Abdullah, A. Z., & Mohamed, A. R. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.01.010 · Cited by 235
Chen, W.-T., Zhang, Y., Zhang, J., Schideman, L., Yu, G., Zhang, P., & Minarick, M. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.04.068 · Cited by 233
Singh, R. K., Ruj, B., Sadhukhan, A. K., & Gupta, P. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.03.067 · Cited by 232
Bockhorn, H., Hornung, A., & Hornung, U. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00026-1 · Cited by 231
Kinetic and Heat Transfer Control in the Slow and Flash Pyrolysis of Solids
Di Blasi, C. (1996) · Industrial & Engineering Chemistry Research · doi:10.1021/ie950243d · Cited by 230
Singh, R. K., Ruj, B., Sadhukhan, A. K., & Gupta, P. (2019) · Journal of the Energy Institute · doi:10.1016/j.joei.2019.01.009 · Cited by 230
Thermal degradation of poly(vinyl chloride)
Marongiu, A., Faravelli, T., Bozzano, G., Dente, M., & Ranzi, E. (2003) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(03)00024-x · Cited by 227
Self-citationBretas Alvim, C., Mendoza-Roca, J. A., & Bes-Piá, A. (2020) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.109739 · Cited by 227
Reprint of: Pyrolysis technologies for municipal solid waste: A review
Chen, D., Yin, L., Wang, H., & He, P. (2015) · Waste Management · doi:10.1016/j.wasman.2015.01.022 · Cited by 226
Use of Supercritical Water for the Liquefaction of Polypropylene into Oil
Chen, W.-T., Jin, K., & Linda Wang, N.-H. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03841 · Cited by 226
Styrene recovery from polystyrene by flash pyrolysis in a conical spouted bed reactor
Artetxe, M., Lopez, G., Amutio, M., Barbarias, I., Arregi, A., Aguado, R., Bilbao, J., & Olazar, M. (2015) · Waste Management · doi:10.1016/j.wasman.2015.05.034 · Cited by 224
Cited by
Kumar, R., Verma, A., Shome, A., Sinha, R., Sinha, S., Jha, P. K., Kumar, R., Kumar, P., Shubham, Das, S., et al. (2021) · Sustainability · doi:10.3390/su13179963 · Cited by 1,111
The world of plastic waste: A review
Nayanathara Thathsarani Pilapitiya, P. G. C., & Ratnayake, A. S. (2024) · Cleaner Materials · doi:10.1016/j.clema.2024.100220 · Cited by 1,034
Managing Plastic Waste─Sorting, Recycling, Disposal, and Product Redesign
Lange, J.-P. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c05013 · Cited by 637
Expanding plastics recycling technologies: chemical aspects, technology status and challenges
Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616
Pyrolysis technology for plastic waste recycling: A state-of-the-art review
Dai, L., Zhou, N., Lv, Y., Cheng, Y., Wang, Y., Liu, Y., Cobb, K., Chen, P., Lei, H., & Ruan, R. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101021 · Cited by 485
Metadata
- Authors
- Dogu, O., Pelucchi, M., Van de Vijver, R., Van Steenberge, P. H. M., D'hooge, D. R., Cuoci, A., Mehl, M., Frassoldati, A., Faravelli, T., & Van Geem, K. M.
- Venue
- Progress in Energy and Combustion Science
- Publisher
- Elsevier BV
- Published
- 2021-05
- Volume
- 84
- Pages
- 100901
- ISSN
- 0360-1285 (ISSN-L)
- OpenAlex
- W3129319549
- Cited by
- 698
- References
- 431
- FWCI
- 30.80
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.