The DOI matches its Crossref record; 157 of the 157 references it cites were found in a registry or an index.
Generation of 3D representative volume elements for heterogeneous materials: A review
Open accessAbstract
This work reviews state of the art representative volume element (RVE) generation techniques for heterogeneous materials. To this end, we present a systematic classification considering a wide range of heterogeneous materials of engineering interest. Here, we divide heterogeneous solids into porous and non-porous media, with 0 < void volume fraction < 1 and void volume fraction = 0, respectively. Further subdivisions are realized based on various morphological features. The corresponding generation methods are classified into three categories: (i) experimental methods targeting reconstruction through experimental characterization of the microstructure, (ii) physics based methods targeting simulation of the physical process(es) responsible for the microstructure formation and evolution, and (iii) geometrical methods concentrating solely on mimicking the morphology (ignoring the physical basis of the microstructure formation process). These comprise of various mathematical tools such as digital image correlation, tessellation, random field generation, and differential equation solvers. For completeness, relevant up-to-date software tools, used at various stages of RVE generation – either commercial or open-source – are summarized. Considered methods are reviewed based on their efficiency and predictive performance with respect to geometrical and topological properties of the microstructures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A discrete numerical model for granular assemblies
Cundall, P. A., & Strack, O. D. L. (1979) · Géotechnique · doi:10.1680/geot.1979.29.1.47 · Cited by 17,527
The determination of the elastic field of an ellipsoidal inclusion, and related problems
Eshelby, J. D. (1957) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1957.0133 · Cited by 13,026
Free Energy of a Nonuniform System. I. Interfacial Free Energy
Cahn, J. W., & Hilliard, J. E. (1958) · The Journal of Chemical Physics · doi:10.1063/1.1744102 · Cited by 10,437
Average stress in matrix and average elastic energy of materials with misfitting inclusions
Mori, T., & Tanaka, K. (1973) · Acta Metallurgica · doi:10.1016/0001-6160(73)90064-3 · Cited by 8,189
Gurson, A. L. (1977) · Journal of Engineering Materials and Technology · doi:10.1115/1.3443401 · Cited by 6,905
Reuss, A. (1929) · ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik · doi:10.1002/zamm.19290090104 · Cited by 6,338
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
A variational approach to the theory of the elastic behaviour of multiphase materials
Hashin, Z., & Shtrikman, S. (1963) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(63)90060-7 · Cited by 5,882
Micromechanics of defects in solids
Mura, T. (1987) · Mechanics of Elastic and Inelastic Solids · doi:10.1007/978-94-009-3489-4 · Cited by 5,539
The quickhull algorithm for convex hulls
Barber, C. B., Dobkin, D. P., & Huhdanpaa, H. (1996) · ACM Transactions on Mathematical Software · doi:10.1145/235815.235821 · Cited by 5,359
Elastic properties of reinforced solids: Some theoretical principles
Hill, R. (1963) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(63)90036-x · Cited by 4,918
Voronoi diagrams—a survey of a fundamental geometric data structure
Aurenhammer, F. (1991) · ACM Computing Surveys · doi:10.1145/116873.116880 · Cited by 4,340
Computational Geometry--An Introduction.
Atallah, M. J., Preparata, F. P., & Shamos, M. I. (1986) · Mathematics of Computation · doi:10.2307/2008200 · Cited by 4,238
Recommendations for the characterization of porous solids (Technical Report)
Rouquerol, J., Avnir, D., Fairbridge, C. W., Everett, D. H., Haynes, J. M., Pernicone, N., Ramsay, J. D. F., Sing, K. S. W., & Unger, K. K. (1994) · Pure and Applied Chemistry · doi:10.1351/pac199466081739 · Cited by 3,984
Foam Structures with a Negative Poisson's Ratio
Lakes, R. (1987) · Science · doi:10.1126/science.235.4792.1038 · Cited by 3,866
A self-consistent mechanics of composite materials
Hill, R. (1965) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(65)90010-4 · Cited by 3,712
Spatial Tessellations: Concepts and Applications of Voronoi Diagrams
Okabe, A., Boots, B. N., & Sugihara, K. (1992) · Cited by 3,546
Phase-Field Models for Microstructure Evolution
Chen, L.-Q. (2002) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.32.112001.132041 · Cited by 2,989
Evolution of nanoporosity in dealloying
Erlebacher, J., Aziz, M. J., Karma, A., Dimitrov, N., & Sieradzki, K. (2001) · Nature · doi:10.1038/35068529 · Cited by 2,753
A new approach to the application of Mori-Tanaka's theory in composite materials
Benveniste, Y. (1987) · Mechanics of Materials · doi:10.1016/0167-6636(87)90005-6 · Cited by 2,714
Computational geometry. an introduction
Preparata, F. P., & Shamos, M. I. (1985) · Cited by 2,488
Brakke, K. A. (1992) · Experimental Mathematics · doi:10.1080/10586458.1992.10504253 · Cited by 2,340
Centroidal Voronoi Tessellations: Applications and Algorithms
Du, Q., Faber, V., & Gunzburger, M. (1999) · SIAM Review · doi:10.1137/s0036144599352836 · Cited by 2,244
A Continuum Model for Void Nucleation by Inclusion Debonding
Needleman, A. (1987) · Journal of Applied Mechanics · doi:10.1115/1.3173064 · Cited by 2,168
Metal–organic framework nanosheets in polymer composite materials for gas separation
Rodenas, T., Luz, I., Prieto, G., Seoane, B., Miro, H., Corma, A., Kapteijn, F., Llabrés i Xamena, F. X., & Gascon, J. (2015) · Nature Materials · doi:10.1038/nmat4113 · Cited by 2,136
Phase Separation by Spinodal Decomposition in Isotropic Systems
Cahn, J. W. (1965) · The Journal of Chemical Physics · doi:10.1063/1.1695731 · Cited by 1,903
The mechanics of three-dimensional cellular materials
Gibson, I. J., & Ashby, M. F. (1982) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0088 · Cited by 1,885
Phase-Field Simulation of Solidification
Boettinger, W. J., Warren, J. A., Beckermann, C., & Karma, A. (2002) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.32.101901.155803 · Cited by 1,771
Fiber-reinforced composites : materials, manufacturing, and design
Mallick, P. K. (2008) · Thammasat University Digital Collections · Cited by 1,718
Berechnung der elastischen Konstanten des Vielkristalls aus den Konstanten des Einkristalls
Kr�ner, E. (1958) · Zeitschrift f�r Physik · doi:10.1007/bf01337948 · Cited by 1,640
Phase-field models in materials science
Steinbach, I. (2009) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/17/7/073001 · Cited by 1,310
Large-scale 3D random polycrystals for the finite element method: Generation, meshing and remeshing
Quey, R., Dawson, P. R., & Barbe, F. (2011) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2011.01.002 · Cited by 1,259
Miller, M. K. (2006) · Handbook of Microscopy for Nanotechnology · doi:10.1007/1-4020-8006-9_8 · Cited by 1,252
Utracki, L. A. (1990) · NPARC · Cited by 1,158
Jaeger, H. M., & Nagel, S. R. (1992) · Science · doi:10.1126/science.255.5051.1523 · Cited by 1,138
Probabilistic modelling of microstructure formation in solidification processes
Rappaz, M., & Gandin, C. (1993) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(93)90065-z · Cited by 1,117
A self consistent approach of the large deformation polycrystal viscoplasticity
Molinari, A., Canova, G. R., & Ahzi, S. (1987) · Acta Metallurgica · doi:10.1016/0001-6160(87)90297-5 · Cited by 1,040
On the mechanics of mother-of-pearl: A key feature in the material hierarchical structure
BARTHELAT, F., TANG, H., ZAVATTIERI, P., LI, C., & ESPINOSA, H. (2007) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2006.07.007 · Cited by 1,032
The effective mechanical properties of nonlinear isotropic composites
Castañeda, P. P. (1991) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(91)90030-r · Cited by 964
Atomic origins of the high catalytic activity of nanoporous gold
Fujita, T., Guan, P., McKenna, K., Lang, X., Hirata, A., Zhang, L., Tokunaga, T., Arai, S., Yamamoto, Y., Tanaka, N., et al. (2012) · Nature Materials · doi:10.1038/nmat3391 · Cited by 905
TEM Sample Preparation and FIB-Induced Damage
Mayer, J., Giannuzzi, L. A., Kamino, T., & Michael, J. (2007) · MRS Bulletin · doi:10.1557/mrs2007.63 · Cited by 896
Electron tomography and holography in materials science
Midgley, P. A., & Dunin-Borkowski, R. E. (2009) · Nature Materials · doi:10.1038/nmat2406 · Cited by 883
Kelly, T. F., & Miller, M. K. (2007) · Review of Scientific Instruments · doi:10.1063/1.2709758 · Cited by 867
3D Soft Metamaterials with Negative Poisson's Ratio
Babaee, S., Shim, J., Weaver, J. C., Chen, E. R., Patel, N., & Bertoldi, K. (2013) · Advanced Materials · doi:10.1002/adma.201301986 · Cited by 856
Gesammelte Mathematische Abhandlungen: Erster Band
Schwarz, H. A. (1890) · Springer eBooks · doi:10.1007/978-3-642-50665-9 · Cited by 827
Studies in Molecular Dynamics. II. Behavior of a Small Number of Elastic Spheres
Alder, B. J., & Wainwright, T. E. (1960) · The Journal of Chemical Physics · doi:10.1063/1.1731425 · Cited by 816
Three-dimensional X-ray structural microscopy with submicrometre resolution
Larson, B. C., Yang, W., Ice, G. E., Budai, J. D., & Tischler, J. Z. (2002) · Nature · doi:10.1038/415887a · Cited by 752
The Elasticity of an Isotropic Aggregate of Anisotropic Cubic Crystals
Hershey, A. V. (1954) · Journal of Applied Mechanics · doi:10.1115/1.4010899 · Cited by 717
Three-dimensional mapping of a deformation field inside a nanocrystal
Pfeifer, M. A., Williams, G. J., Vartanyants, I. A., Harder, R., & Robinson, I. K. (2006) · Nature · doi:10.1038/nature04867 · Cited by 697
Continuum Micromechanics: Survey
Zaoui, A. (2002) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(2002)128:8(808 · Cited by 677
A Basic Course in Algebraic Topology
Massey, W. S. (1991) · Graduate Texts in Mathematics · doi:10.1007/978-1-4939-9063-4 · Cited by 673
Random Heterogeneous Media: Microstructure and Improved Bounds on Effective Properties
Torquato, S. (1991) · Applied Mechanics Reviews · doi:10.1115/1.3119494 · Cited by 664
An Atomistic Description of Dealloying
Erlebacher, J. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1784820 · Cited by 637
Bernard, O., Ulm, F., & Lemarchand, É. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00039-5 · Cited by 623
Study of phase-separation dynamics by use of cell dynamical systems. I. Modeling
Oono, Y., & Puri, S. (1988) · Physical Review A · doi:10.1103/physreva.38.434 · Cited by 598
A counter-example to Kelvin's conjecture on minimal surfaces
Weaire, D., & Phelan, R. (1994) · Philosophical Magazine Letters · doi:10.1080/09500839408241577 · Cited by 587
Spatial tessellations: concepts and applications of voronoi diagrams
Watson, D. (1993) · Computers & Geosciences · doi:10.1016/0098-3004(93)90024-y · Cited by 574
Multiscale Methods for Composites: A Review
Kanouté, P., Boso, D. P., Chaboche, J. L., & Schrefler, B. A. (2009) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-008-9028-8 · Cited by 563
Charge-Induced Reversible Strain in a Metal
Weissmüller, J., Viswanath, R. N., Kramer, D., Zimmer, P., Würschum, R., & Gleiter, H. (2003) · Science · doi:10.1126/science.1081024 · Cited by 525
Fisher, F. T. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00069-1 · Cited by 510
Random Packing of Equal and Unequal Spheres in Two and Three Dimensions
VISSCHER, W. M., & BOLSTERLI, M. (1972) · Nature · doi:10.1038/239504a0 · Cited by 501
Random packings of spheres and spherocylinders simulated by mechanical contraction
Williams, S. R., & Philipse, A. P. (2003) · Physical Review E · doi:10.1103/physreve.67.051301 · Cited by 498
Computer simulation of close random packing of equal spheres
Jodrey, W. S., & Tory, E. M. (1985) · Physical Review A · doi:10.1103/physreva.32.2347 · Cited by 473
Variations of Density and Porosity with Depth in Deep-sea Sediments
Hamilton, E. L. (1976) · SEPM Journal of Sedimentary Research · doi:10.1306/212f6f3c-2b24-11d7-8648000102c1865d · Cited by 470
Periodic area-minimizing surfaces in block copolymers
Thomas, E. L., Anderson, D. M., Henkee, C. S., & Hoffman, D. (1988) · Nature · doi:10.1038/334598a0 · Cited by 462
Carbon Nanofibers and Their Composites: A Review of Synthesizing, Properties and Applications
Feng, L., Xie, N., & Zhong, J. (2014) · Materials · doi:10.3390/ma7053919 · Cited by 442
Shape-based interpolation of multidimensional objects
Raya, S. P., & Udupa, J. K. (1990) · IEEE Transactions on Medical Imaging · doi:10.1109/42.52980 · Cited by 435
Bostanabad, R., Zhang, Y., Li, X., Kearney, T., Brinson, L. C., Apley, D. W., Liu, W. K., & Chen, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.01.005 · Cited by 434
Geometric Tools for Computer Graphics
Schneider, P. J., & Eberly, D. H. (2002) · Thammasat University Digital Collections · Cited by 433
Geometric Tools for Computer Graphics
(2003) · Elsevier eBooks · doi:10.1016/b978-1-55860-594-7.x5000-0 · Cited by 401
The primary damage state in fcc, bcc and hcp metals as seen in molecular dynamics simulations
Bacon, D., Gao, F., & Osetsky, Y. N. (2000) · Journal of Nuclear Materials · doi:10.1016/s0022-3115(99)00165-8 · Cited by 377
Eberly, D. H. (2006) · CRC Press eBooks · doi:10.1201/b18212 · Cited by 370
Gandin, C. A., Desbiolles, J. L., Rappaz, M., & Thevoz, P. (1999) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-999-0226-2 · Cited by 360
Architecture of the osteocyte network correlates with bone material quality
Kerschnitzki, M., Kollmannsberger, P., Burghammer, M., Duda, G. N., Weinkamer, R., Wagermaier, W., & Fratzl, P. (2013) · Journal of Bone and Mineral Research · doi:10.1002/jbmr.1927 · Cited by 359
The use of environmental scanning electron microscopy for imaging wet and insulating materials
Donald, A. M. (2003) · Nature Materials · doi:10.1038/nmat898 · Cited by 357
Assessment of the Self Consistent Scheme Approximation: Conductivity of Particulate Composites
Hashin, Z. (1968) · Journal of Composite Materials · doi:10.1177/002199836800200302 · Cited by 356
High Resolution 3D X-Ray Diffraction Microscopy
Miao, J., Ishikawa, T., Johnson, B., Anderson, E. H., Lai, B., & Hodgson, K. O. (2002) · Physical Review Letters · doi:10.1103/physrevlett.89.088303 · Cited by 331
Bounds on the Electromagnetic, Elastic, and Other Properties of Two-Component Composites
Milton, G. W. (1981) · Physical Review Letters · doi:10.1103/physrevlett.46.542 · Cited by 314
On the division of space with minimum partitional area
Thomson, W. (1887) · Acta Mathematica · doi:10.1007/bf02418046 · Cited by 312
Triply Periodic Bicontinuous Cubic Microdomain Morphologies by Symmetries
Wohlgemuth, M., Yufa, N., Hoffman, J., & Thomas, E. L. (2001) · Macromolecules · doi:10.1021/ma0019499 · Cited by 295
Puri, S., & Oono, Y. (1988) · Physical Review A · doi:10.1103/physreva.38.1542 · Cited by 293
Lattice Boltzmann Model for Free Surface Flow for Modeling Foaming
Körner, C., THIES, M. F., Hofmann, T. N., et al. (2005) · Journal of Statistical Physics · doi:10.1007/s10955-005-8879-8 · Cited by 292
Neutron imaging in materials science
Kardjilov, N., Manke, I., Hilger, A., Strobl, M., & Banhart, J. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70139-0 · Cited by 286
Buckling-induced encapsulation of structured elastic shells under pressure
Shim, J., Perdigou, C., Chen, E. R., Bertoldi, K., & Reis, P. M. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1115674109 · Cited by 263
Sambaer, W., Zatloukal, M., & Kimmer, D. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2010.10.035 · Cited by 262
Three-dimensional morphology of nanoporous gold
Fujita, T., Qian, L.-H., Inoke, K., Erlebacher, J., & Chen, M.-W. (2008) · Applied Physics Letters · doi:10.1063/1.2948902 · Cited by 261
The evolution of cellular structures
Stavans, J. (1993) · Reports on Progress in Physics · doi:10.1088/0034-4885/56/6/002 · Cited by 257
Vaughan, T. J., & McCarthy, C. T. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.10.020 · Cited by 256
Vertex models for two-dimensional grain growth
Kawasaki, K., Nagai, T., & Nakashima, K. (1989) · Philosophical Magazine B · doi:10.1080/13642818908205916 · Cited by 246
Voronoi Diagram in the Laguerre Geometry and Its Applications
Imai, H., Iri, M., & Murota, K. (1985) · SIAM Journal on Computing · doi:10.1137/0214006 · Cited by 245
Straumit, I., Lomov, S. V., & Wevers, M. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2014.11.016 · Cited by 242
Beran, M. J., & Molyneux, J. E. (1966) · Quarterly of Applied Mathematics · doi:10.1090/qam/99925 · Cited by 237
Mechanical properties and scaling laws of nanoporous gold
Sun, X., Xu, G., Li, X., Feng, X., & Gao, H. (2013) · Journal of Applied Physics · doi:10.1063/1.4774246 · Cited by 215
Hellmich, C., Barthélémy, J.-F., & Dormieux, L. (2004) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2004.05.004 · Cited by 210
Ren, X., Shen, J., Ghaedizadeh, A., Tian, H., & Min Xie, Y. (2015) · Smart Materials and Structures · doi:10.1088/0964-1726/24/9/095016 · Cited by 208
Quantitative serial sectioning analysis
Alkemper, J., & Voorhees, P. W. (2001) · Journal of Microscopy · doi:10.1046/j.1365-2818.2001.00832.x · Cited by 203
3D composite reinforcement meso F.E. analyses based on X-ray computed tomography
Naouar, N., Vidal-Salle, E., Schneider, J., Maire, E., & Boisse, P. (2015) · Composite Structures · doi:10.1016/j.compstruct.2015.07.005 · Cited by 201
Emerson, M. J., Jespersen, K. M., Dahl, A. B., Conradsen, K., & Mikkelsen, L. P. (2017) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.12.028 · Cited by 196
Simulations of fiber flocculation: Effects of fiber properties and interfiber friction
Schmid, C. F., Switzer, L. H., & Klingenberg, D. J. (2000) · Journal of Rheology · doi:10.1122/1.551116 · Cited by 194
Limits to magnetic resonance microscopy
Glover, P., & Mansfield, S. P. (2002) · Reports on Progress in Physics · doi:10.1088/0034-4885/65/10/203 · Cited by 187
Periodic three-dimensional mesh generation for crystalline aggregates based on Voronoi tessellations
Fritzen, F., Böhlke, T., & Schnack, E. (2009) · Computational Mechanics · doi:10.1007/s00466-008-0339-2 · Cited by 184
Mechanical Properties of a New Type of Architected Interpenetrating Phase Composite Materials
Al‐Ketan, O., Al‐Rub, R. K. A., & Rowshan, R. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201600235 · Cited by 183
New bounds on effective elastic moduli of two-component materials
Milton, G. W., & Phan-Thien, N. (1982) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0044 · Cited by 182
On three-dimensional dilational elastic metamaterials
Bückmann, T., Schittny, R., Thiel, M., Kadic, M., Milton, G. W., & Wegener, M. (2014) · New Journal of Physics · doi:10.1088/1367-2630/16/3/033032 · Cited by 182
An objective comparison of 3-D image interpolation methods
Grevera, G. J., & Udupa, J. K. (1998) · IEEE Transactions on Medical Imaging · doi:10.1109/42.730408 · Cited by 180
Computer simulation of random packing of unequal particles
He, D., Ekere, N. N., & Cai, L. (1999) · Physical Review E · doi:10.1103/physreve.60.7098 · Cited by 179
Level Surfaces of Gaussian Random Fields and Microemulsions
Teubner, M. (1991) · Europhysics Letters (EPL) · doi:10.1209/0295-5075/14/5/003 · Cited by 178
Representative volume element for non-uniform micro-structure
Shan, Z., & Gokhale, A. M. (2002) · Computational Materials Science · doi:10.1016/s0927-0256(01)00257-9 · Cited by 175
The TriBeam system: Femtosecond laser ablation in situ SEM
Echlin, M. P., Straw, M., Randolph, S., Filevich, J., & Pollock, T. M. (2015) · Materials Characterization · doi:10.1016/j.matchar.2014.10.023 · Cited by 173
Coherent X-Ray Diffraction Imaging
Miao, J., Sandberg, R. L., & Song, C. (2012) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/jstqe.2011.2157306 · Cited by 172
Krause, M., Hausherr, J. M., Burgeth, B., Herrmann, C., & Krenkel, W. (2010) · Journal of Materials Science · doi:10.1007/s10853-009-4016-4 · Cited by 169
Fredrich, J. T. (1999) · Physics and Chemistry of the Earth Part A Solid Earth and Geodesy · doi:10.1016/s1464-1895(99)00079-4 · Cited by 165
Three‐dimensional discrete element simulation for granular materials
Zhao, D., Nezami, E. G., Hashash, Y. M. A., & Ghaboussi, J. (2006) · Engineering Computations · doi:10.1108/02644400610689884 · Cited by 164
Scattering properties of the leveled-wave model of random morphologies
Berk, N. F. (1991) · Physical Review A · doi:10.1103/physreva.44.5069 · Cited by 159
Coupled size and boundary-condition effects in viscoelastic heterogeneous and composite bodies
Huet, C. (1999) · Mechanics of Materials · doi:10.1016/s0167-6636(99)00038-1 · Cited by 159
Automated serial sectioning for 3-D analysis of microstructures
Spowart, J. E. (2006) · Scripta Materialia · doi:10.1016/j.scriptamat.2006.01.019 · Cited by 159
Lin, Z., Liu, S., Mao, W., Tian, H., Wang, N., Zhang, N., Tian, F., Han, L., Feng, X., & Mai, Y. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702591 · Cited by 157
Three-dimensional reconstruction of a composite cathode for lithium-ion cells
Ender, M., Joos, J., Carraro, T., & Ivers‐Tiffée, E. (2010) · Electrochemistry Communications · doi:10.1016/j.elecom.2010.12.004 · Cited by 155
Simple cubic three-dimensional auxetic metamaterials
Shen, J., Zhou, S., Huang, X., & Xie, Y. M. (2014) · physica status solidi (b) · doi:10.1002/pssb.201451304 · Cited by 150
Filling domains with disks: an advancing front approach
Feng, Y. T., Han, K., & Owen, D. R. J. (2002) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.583 · Cited by 137
Milton, G. W. (2012) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2012.08.011 · Cited by 136
A case study of simulating submicron aerosol filtration via lightweight spun-bonded filter media
Wang, Q., Mazé, B., Tafreshi, H. V., & Pourdeyhimi, B. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2006.03.039 · Cited by 132
Large deformation analysis of fibrous materials using rate constitutive equations
Badel, P., Vidal-Sallé, E., & Boisse, P. (2008) · Computers & Structures · doi:10.1016/j.compstruc.2008.01.009 · Cited by 127
Periodic Bicontinuous Composites for High Specific Energy Absorption
Lee, J., Wang, L., Boyce, M. C., & Thomas, E. L. (2012) · Nano Letters · doi:10.1021/nl302234f · Cited by 126
Hallberg, H., Wallin, M., & Ristinmaa, M. (2010) · Computational Materials Science · doi:10.1016/j.commatsci.2010.04.012 · Cited by 125
Investigation on reconstruction methods applied to 3D terahertz computed tomography
Recur, B., Younus, A., Salort, S., Mounaix, P., Chassagne, B., Desbarats, P., Caumes, J.-P., & Abraham, E. (2011) · Optics Express · doi:10.1364/oe.19.005105 · Cited by 117
On three-dimensional dilational elastic metamaterials
Bückmann, T., Schittny, R., Thiel, M., et al. (2014) · Repository KITopen (Karlsruhe Institute of Technology) · doi:10.5445/ir/1000042057 · Cited by 117
Janssens, M. (2009) · Mathematics and Computers in Simulation · doi:10.1016/j.matcom.2009.02.011 · Cited by 113
Wang, W., Dai, Y., Zhang, C., Gao, X., & Zhao, M. (2016) · Materials · doi:10.3390/ma9080624 · Cited by 108
Discrete element modelling of grain flow in a planar silo: influence of simulation parameters
González-Montellano, C., Ayuga, F., & Ooi, J. Y. (2010) · Granular Matter · doi:10.1007/s10035-010-0204-9 · Cited by 107
Coleri, E., Harvey, J., Yang, K., & Boone, J. M. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.12.071 · Cited by 100
Serial sectioning methods for 3D investigations in materials science
Zankel, A., Wagner, J., & Poelt, P. (2014) · Micron · doi:10.1016/j.micron.2014.03.002 · Cited by 97
Planar Random Networks with Flexible Fibers
Niskanen, K. J., & Alava, M. J. (1994) · Physical Review Letters · doi:10.1103/physrevlett.73.3475 · Cited by 97
3D microstructure modeling of compressed fiber-based materials
Gaiselmann, G., Tötzke, C., Manke, I., Lehnert, W., & Schmidt, V. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.095 · Cited by 84
The effect of nanotubes waviness on mechanical properties of CNT/SMP composites
Dastgerdi, J. N., Marquis, G., & Salimi, M. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.07.012 · Cited by 81
Efimov, А. Е., Tonevitsky, A., Dittrich, M., & Matsko, N. B. (2007) · Journal of Microscopy · doi:10.1111/j.1365-2818.2007.01773.x · Cited by 80
Architected Materials with Ultra‐Low Porosity for Vibration Control
Javid, F., Wang, P., Shanian, A., & Bertoldi, K. (2016) · Advanced Materials · doi:10.1002/adma.201600052 · Cited by 73
Müller, V., Kabel, M., Andrä, H., & Böhlke, T. (2015) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2015.02.030 · Cited by 71
Self-consistent properties of carbon nanotubes and hexagonal arrays as composite reinforcements
Pipes, R. B., Frankland, S. J. V., Hubert, P., & Saether, E. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00020-4 · Cited by 71
Schneider, K., Klusemann, B., & Bargmann, S. (2016) · Advances in Engineering Software · doi:10.1016/j.advengsoft.2016.06.001 · Cited by 67
Self-citationDöbrich, K. M., Rau, C. D., & Krill, C. E. (2004) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-004-0144-2 · Cited by 64
Kato, M., Ito, T., Aoyama, Y., Sawa, K., Kaneko, T., Kawase, N., & Jinnai, H. (2007) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21088 · Cited by 58
Simmons, J. P., Chuang, P. D., Comer, M. L., Spowart, J. E., Uchic, M. D., & Graef, M. D. (2008) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/17/2/025002 · Cited by 53
Co-continuous polymer systems: A numerical investigation
Carolan, D., Chong, H. M., Ivankoviç, A., Kinloch, A. J., & Taylor, A. C. (2014) · Computational Materials Science · doi:10.1016/j.commatsci.2014.10.039 · Cited by 47
Sonon, B., François, B., & Massart, T. (2015) · Computational Mechanics · doi:10.1007/s00466-015-1168-8 · Cited by 46
A statistical ensemble cellular automaton microstructure model for primary recrystallization
Kühbach, M., Gottstein, G., & Barrales-Mora, L. A. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.01.068 · Cited by 44
Liberato, M. S., Kogikoski, S., da Silva, E. R., de Araújo, D. R., Guha, S., & Alves, W. A. (2016) · Journal of Materials Chemistry B · doi:10.1039/c5tb02240a · Cited by 43
Lin, Z., Liu, S., Mao, W., Tian, H., Wang, N., Zhang, N., Tian, F., Han, L., Feng, X., & Mai, Y. (2017) · Angewandte Chemie · doi:10.1002/ange.201702591 · Cited by 41
Huang, M. N., & Li, Y.-M. (2012) · Computational Materials Science · doi:10.1016/j.commatsci.2012.08.032 · Cited by 39
The Role of Computer Simulation in Nanoporous Metals—A Review
Xia, R., Wu, R., Liu, Y., & Sun, X. Y. (2015) · Materials · doi:10.3390/ma8085060 · Cited by 36
Co-continuous Metal−Ceramic Nanocomposites
Zhang, X., Harley, G., & Jonghe, L. C. D. (2005) · Nano Letters · doi:10.1021/nl050379t · Cited by 30
Trueman, A., Knight, S. P., Colwell, J. M., Hashimoto, T., Carr, J., Skeldon, P., & Thompson, G. E. (2013) · Corrosion Science · doi:10.1016/j.corsci.2013.06.021 · Cited by 30
Microstructure evolution and mechanical properties of selective laser melted Ti-6Al-4V
Simonelli, M. (2014) · UPT. Syiah Kuala University Library (Syiah Kuala University) · Cited by 27
OOF3D: An image-based finite element solver for materials science
Coffman, V. R., Reid, A. C. E., Langer, S. A., & Doğan, G. (2012) · Mathematics and Computers in Simulation · doi:10.1016/j.matcom.2012.03.003 · Cited by 24
Soyarslan, C., Argeso, H., & Bargmann, S. (2018) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2018.244 · Cited by 17
Self-citationOOF3D: An Image-Based Finite Element Solver for Materials Science
Coffman, V. R., Reid, A. C. E., Langer, S. A., & Doğan, G. (2012) · Conference proceedings of the Society for Experimental Mechanics · doi:10.1007/978-1-4419-9796-8_47 · Cited by 15
Cited by
A review of nonlinear FFT-based computational homogenization methods
Schneider, M. (2021) · Acta Mechanica · doi:10.1007/s00707-021-02962-1 · Cited by 265
Raabe, D., Sun, B., Kwiatkowski Da Silva, A., Gault, B., Yen, H.-W., Sedighiani, K., Thoudden Sukumar, P., Souza Filho, I. R., Katnagallu, S., Jägle, E., et al. (2020) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-020-05947-2 · Cited by 257
Lower hardness than strength: The auxetic composite microstructure of limpet tooth
Wurmshuber, M., Wilmers, J., Kim, J., Oh, S. H., Bargmann, S., & Kiener, D. (2023) · Acta Biomaterialia · doi:10.1016/j.actbio.2023.04.035 · Cited by 14
Self-citation
Metadata
- Authors
- Bargmann, S., Klusemann, B., Markmann, J., Schnabel, J. E., Schneider, K., Soyarslan, C., & Wilmers, J.
- Venue
- Progress in Materials Science
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 96
- Pages
- 322-384
- ISSN
- 0079-6425 (ISSN-L)
- OpenAlex
- W2793598076
- Cited by
- 546
- References
- 157
- FWCI
- 26.15
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.