The DOI matches its Crossref record; 211 of the 211 references it cites were found in a registry or an index.
Towards the design of high-performance plant fibre composites
Open accessAbstract
Abstract For the past 15 years, there has been tremendous interest and technological development concerning biocomposites. Plant fibres can be derived from a multitude of natural agro-sources, with the preferred choice as a composite reinforcement often being driven by abundance, geographical location, and historical use. While from a product designer's or engineer's point of view, all plant cell walls are 'similar', they have indeed substantial morphological and mechanical diversity linked to their structure, biochemical composition and the plant growing conditions. Here, we provide a holistic overview of the main types of plant cell walls used as polymer reinforcements. The relationship between their structures and properties, in constant link with potential associated composite, is specifically discussed. Then, the fibre extraction and cultivation modes are compared, through an environmental assessment. We also show how a scientist's point of view on cell wall structure and associated experimental approach lead to distinct results; following a critical review, we make recommendations on appropriate characterisation. A final discussion highlights the pertinent parameters that accurately define a composite reinforcement fibre. The review will serve as a handbook reference for researchers and designers in the field of biomaterials for appropriate selection of plant cell walls for specific composite applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Colorimetric Method for Determination of Sugars and Related Substances
DuBois, M., Gilles, K. A., Hamilton, J. K., Rebers, P. A., & Smith, F. (1956) · Analytical Chemistry · doi:10.1021/ac60111a017 · Cited by 52,269
Van Soest, P. J., Robertson, J. B., & Lewis, B. A. (1991) · Journal of Dairy Science · doi:10.3168/jds.s0022-0302(91)78551-2 · Cited by 28,658
World map of the Köppen-Geiger climate classification updated
Kottek, M., Grieser, J., Beck, C., Rudolf, B., & Rubel, F. (2006) · Meteorologische Zeitschrift · doi:10.1127/0941-2948/2006/0130 · Cited by 11,456
VI. The phenomena of rupture and flow in solids
Griffith, A. A. (1921) · Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character · doi:10.1098/rsta.1921.0006 · Cited by 11,052
Segal, L., Creely, J. J., Martin, A. E., & Conrad, C. M. (1959) · Textile Research Journal · doi:10.1177/004051755902901003 · Cited by 8,613
New method for quantitative determination of uronic acids
Blumenkrantz, N., & Asboe-Hansen, G. (1973) · Analytical Biochemistry · doi:10.1016/0003-2697(73)90377-1 · Cited by 7,140
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
A review of recent developments in natural fibre composites and their mechanical performance
Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.038 · Cited by 3,479
Cosgrove, D. J. (2005) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm1746 · Cited by 3,308
Soest, P. J. V. (1963) · Journal of AOAC INTERNATIONAL · doi:10.1093/jaoac/46.5.829 · Cited by 2,566
Natural fiber polymer composites: A review
Saheb, D. N., & Jog, J. P. (1999) · Advances in Polymer Technology · doi:10.1002/(sici)1098-2329(199924)18:4<351::aid-adv6>3.0.co;2-x · Cited by 2,429
Are natural fiber composites environmentally superior to glass fiber reinforced composites?
Joshi, S. V., Drzal, L. T., Mohanty, A. K., & Arora, S. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.09.016 · Cited by 2,335
Panshin, A. J., & de Zeeuw, C. (1964) · Medical Entomology and Zoology · Cited by 2,095
ESAU, K. (1960) · Soil Science · doi:10.1097/00010694-196008000-00031 · Cited by 2,087
Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review
Jawaid, M., & Abdul Khalil, H. P. S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.04.043 · Cited by 1,567
Critical review of recent publications on use of natural composites in infrastructure
Dittenber, D. B., & GangaRao, H. V. S. (2012) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.11.019 · Cited by 1,515
Flax fibre and its composites – A review
Yan, L., Chouw, N., & Jayaraman, K. (2014) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.08.014 · Cited by 1,454
The wood from the trees: The use of timber in construction
Ramage, M. H., Burridge, H., Busse-Wicher, M., Fereday, G., Reynolds, T., Shah, D. U., Wu, G., Yu, L., Fleming, P., Densley-Tingley, D., et al. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.107 · Cited by 1,402
Self-citationSisal fibre and its composites: a review of recent developments
Li, Y., Mai, Y.-W., & Ye, L. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00101-9 · Cited by 1,212
Knight, M. R., Campbell, A. K., Smith, S. M., & Trewavas, A. J. (1991) · Nature · doi:10.1038/352524a0 · Cited by 1,169
Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase
Baley, C. (2002) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(02)00040-4 · Cited by 1,066
Self-citationRong, M. Z., Zhang, M. Q., Liu, Y., Yang, G. C., & Zeng, H. M. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00046-x · Cited by 1,047
Calcium Regulation in Plant Cells and Its Role in Signaling
Bush, D. S. (1995) · Annual Review of Plant Physiology and Plant Molecular Biology · doi:10.1146/annurev.arplant.46.1.95 · Cited by 968
(2006) · CRC Press eBooks · doi:10.1201/9781420015270 · Cited by 914
Bamboo fibre reinforced biocomposites: A review
Abdul Khalil, H. P. S., Bhat, I. U. H., Jawaid, M., Zaidon, A., Hermawan, D., & Hadi, Y. S. (2012) · Materials & Design · doi:10.1016/j.matdes.2012.06.015 · Cited by 835
Gassan, J., & Bledzki, A. K. (1999) · Composites Science and Technology · doi:10.1016/s0266-3538(98)00169-9 · Cited by 697
Satyanarayana, K. G., Guimarães, J. L., & Wypych, F. (2007) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.02.006 · Cited by 693
Vibrations of free and surface-coupled atomic force microscope cantilevers: Theory and experiment
Rabe, U., Janser, K., & Arnold, W. (1996) · Review of Scientific Instruments · doi:10.1063/1.1147409 · Cited by 683
In touch: plant responses to mechanical stimuli
Braam, J. (2005) · New Phytologist · doi:10.1111/j.1469-8137.2004.01263.x · Cited by 676
Ecodesign of automotive components making use of natural jute fiber composites
Alves, C., Ferrão, P. M. C., Silva, A. J., Reis, L. G., Freitas, M., Rodrigues, L. B., & Alves, D. E. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2009.10.022 · Cited by 644
Influence of processing and chemical treatment of flax fibres on their composites
de Weyenberg, I. V., Ivens, J., Coster, A. D., Kino, B., Baetens, E., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00093-9 · Cited by 586
Shah, D. U. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7458-7 · Cited by 532
Self-citationIdicula, M., Malhotra, S. K., Joseph, K., & Thomas, S. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.10.023 · Cited by 530
Cell-wall recovery after irreversible deformation of wood
Keckes, J., Burgert, I., Frühmann, K., Müller, M., Kölln, K., Hamilton, M., Burghammer, M., Roth, S. V., Stanzl-Tschegg, S., & Fratzl, P. (2003) · Nature Materials · doi:10.1038/nmat1019 · Cited by 500
Monoclonal Antibodies to Plant Cell Wall Xylans and Arabinoxylans
McCartney, L., Marcus, S. E., & Knox, J. P. (2005) · Journal of Histochemistry & Cytochemistry · doi:10.1369/jhc.4b6578.2005 · Cited by 495
Nam, T. H., Ogihara, S., Tung, N. H., & Kobayashi, S. (2011) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.04.001 · Cited by 462
Mechanical and chemical behavior of spruce wood modified by heat
Yildiz, S., Gezer, E. D., & Yildiz, U. C. (2006) · Building and Environment · doi:10.1016/j.buildenv.2005.07.017 · Cited by 456
Bismarck, A., Aranberri‐Askargorta, I., Springer, J., Lampke, T., Wielage, B., Stamboulis, A., Shenderovich, I., & Limbach, H. (2002) · Polymer Composites · doi:10.1002/pc.10485 · Cited by 453
Cellulosic Fibers: Role of Matrix Polysaccharides in Structure and Function
Mikshina, P. V., Chernova, T., Chemikosova, S. B., Ибрагимова, Н. Н., Mokshina, N., & Gorshkov, T. (2013) · InTech eBooks · doi:10.5772/51941 · Cited by 445
Charlet, K., Baley, C., Morvan, C., Jernot, J. P., Gomina, M., & Bréard, J. (2007) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.03.006 · Cited by 442
Self-citationEffect of cellulose, hemicellulose and lignin contents on pyrolysis and combustion of natural fibers
Dorez, G., Ferry, L., Sonnier, R., Taguet, A., & Lopez-Cuesta, J.-M. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.03.017 · Cited by 442
Unravelling cell wall formation in the woody dicot stem
Mellerowicz, E. J., Baucher, M., Sundberg, B., & Boerjan, W. (2001) · Plant Molecular Biology · doi:10.1023/a:1010699919325 · Cited by 426
30,000-Year-Old Wild Flax Fibers
Kvavadze, E., Bar-Yosef, O., Belfer-Cohen, A., Boaretto, E., Jakeli, N., Matskevich, Z., & Meshveliani, T. (2009) · Science · doi:10.1126/science.1175404 · Cited by 415
Bledzki, A. K., & Jaszkiewicz, A. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.06.005 · Cited by 415
Effect of alkali treatment on interfacial bonding in abaca fiber-reinforced composites
Cai, M., Takagi, H., Nakagaito, A. N., Li, Y., & Waterhouse, G. I. N. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.08.025 · Cited by 414
Carbon storage potential in natural fiber composites
Pervaiz, M., & Sain, M. M. (2003) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(02)00173-8 · Cited by 413
Biagiotti, J., Puglia, D., & Kenny, J. M. (2004) · Journal of Natural Fibers · doi:10.1300/j395v01n02_04 · Cited by 412
Optimising industrial hemp fibre for composites
Pickering, K. L., Beckermann, G. W., Alam, S. N., & Foreman, N. J. (2007) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2006.02.020 · Cited by 411
Life cycle assessment of biofibres replacing glass fibres as reinforcement in plastics
Corbière-Nicollier, T., Gfeller Laban, B., Lundquist, L., Leterrier, Y., Månson, J.-A. E., & Jolliet, O. (2001) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(01)00089-1 · Cited by 386
Natural fibre-polymer composites
Satyanarayana, K. G., Sukumaran, K., Mukherjee, P. S., Pavithran, C., & Pillai, S. G. K. (1990) · Cement and Concrete Composites · doi:10.1016/0958-9465(90)90049-4 · Cited by 364
Extraction and preparation of bamboo fibre-reinforced composites
Zakikhani, P., Zahari, R., Sultan, M. T. H., & Majid, D. L. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.06.058 · Cited by 361
Industrial Applications of Natural Fibres: Structure, Properties and Technical Applications
(2010) · Wiley eBooks · doi:10.1002/9780470660324 · Cited by 361
Curauá fibers in the automobile industry – a sustainability assessment
Zah, R., Hischier, R., Leão, A. L., & Braun, I. (2007) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2006.05.036 · Cited by 356
Micromechanical understanding of the cell-wall structure
Salmén, L. (2004) · Comptes Rendus. Biologies · doi:10.1016/j.crvi.2004.03.010 · Cited by 343
Mechanical properties of short-flax-fibre reinforced compounds
Bos, H. L., Müssig, J., & van den Oever, M. J. A. (2005) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.10.011 · Cited by 322
Building energy performance: A LCA case study of kenaf-fibres insulation board
Ardente, F., Beccali, M., Cellura, M., & Mistretta, M. (2008) · Energy and Buildings · doi:10.1016/j.enbuild.2006.12.009 · Cited by 278
Influence of alkali treatment on internal microstructure and tensile properties of abaca fibers
Cai, M., Takagi, H., Nakagaito, A. N., Katoh, M., Ueki, T., Waterhouse, G. I. N., & Li, Y. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.11.048 · Cited by 278
Bourmaud, A., Morvan, C., Bouali, A., Placet, V., Perré, P., & Baley, C. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2012.11.031 · Cited by 276
Self-citationEffect of chemical treatments on water sorption and mechanical properties of flax fibres
Alix, S., Philippe, E., Bessadok, A., Lebrun, L., Morvan, C., & Marais, S. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.04.067 · Cited by 275
Abdul Khalil, H. P. S., Yusra, A. F. I., Bhat, A. H., & Jawaid, M. (2010) · Industrial Crops and Products · doi:10.1016/j.indcrop.2009.09.008 · Cited by 269
Mechanical properties of spruce wood cell walls by nanoindentation
Gindl, W., Gupta, H. S., Schöberl, T., Lichtenegger, H. C., & Fratzl, P. (2004) · Applied Physics A · doi:10.1007/s00339-004-2864-y · Cited by 268
Building flax fibres: more than one brick in the walls
Morvan, C., Andème-Onzighi, C., Girault, R., Himmelsbach, D. S., Driouich, A., & Akin, D. E. (2003) · Plant Physiology and Biochemistry · doi:10.1016/j.plaphy.2003.07.001 · Cited by 266
Extraction of bamboo fibers and their use as reinforcement in polymeric composites
Deshpande, A. P., Bhaskar Rao, M., & Lakshmana Rao, C. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000404)76:1<83::aid-app11>3.0.co;2-l · Cited by 257
Fiber orientation in simple injection moldings. Part I: Theory and numerical methods
Bay, R. S., & Tucker, C. L. (1992) · Polymer Composites · doi:10.1002/pc.750130409 · Cited by 256
Investigations on the recycling of hemp and sisal fibre reinforced polypropylene composites
Bourmaud, A., & Baley, C. (2007) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.02.018 · Cited by 255
Self-citationEffect of flax fibres individualisation on tensile failure of flax/epoxy unidirectional composite
Coroller, G., Lefeuvre, A., Le Duigou, A., Bourmaud, A., Ausias, G., Gaudry, T., & Baley, C. (2013) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.03.018 · Cited by 254
Self-citationNatural fibre composites: Comprehensive Ashby-type materials selection charts
Shah, D. U. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.05.002 · Cited by 251
Self-citationGrowth and hydraulic (not mechanical) constraints govern the scaling of tree height and mass
Niklas, K. J., & Spatz, H.-C. (2004) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0405857101 · Cited by 248
Superhydrophobic antibacterial cotton textiles
Shateri Khalil-Abad, M., & Yazdanshenas, M. E. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.07.049 · Cited by 247
Le Duigou, A., Davies, P., & Baley, C. (2011) · Journal of Biobased Materials and Bioenergy · doi:10.1166/jbmb.2011.1116 · Cited by 241
Self-citationMellerowicz, E. J., & Gorshkova, T. A. (2012) · Journal of Experimental Botany · doi:10.1093/jxb/err339 · Cited by 235
Reichert, S., Menges, A., & Correa, D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2014.02.010 · Cited by 230
Behaviour of Single Wood Fibres under Axial Tensile Strain
PAGE, D. H., EL-HOSSEINY, F., & WINKLER, K. (1971) · Nature · doi:10.1038/229252a0 · Cited by 230
Alfa fibres: Mechanical, morphological and interfacial characterization
PAIVA, M., AMMAR, I., CAMPOS, A., CHEIKH, R., & CUNHA, A. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.05.019 · Cited by 228
Exploring the micromechanical design of plant cell walls
Burgert, I. (2006) · American Journal of Botany · doi:10.3732/ajb.93.10.1391 · Cited by 220
TOMLINSON, P. B. (2006) · Botanical Journal of the Linnean Society · doi:10.1111/j.1095-8339.2006.00520.x · Cited by 219
Quality of chemically modified hemp fibers.
Kostic, M., Pejic, B., & Skundric, P. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2006.11.050 · Cited by 217
Davies, G. C., & Bruce, D. M. (1998) · Textile Research Journal · doi:10.1177/004051759806800901 · Cited by 211
Kenaf bast cellulosic fibers hierarchy: A comprehensive approach from micro to nano
Karimi, S., Tahir, P. M., Karimi, A., Dufresne, A., & Abdulkhani, A. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.09.106 · Cited by 206
Liu, M., Fernando, D., Daniel, G., Madsen, B., Meyer, A. S., Ale, M. T., & Thygesen, A. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.02.010 · Cited by 203
The effects of mechanically-induced stress in plants ? a review
Biddington, N. L. (1986) · Plant Growth Regulation · doi:10.1007/bf00025193 · Cited by 197
Effect of jute and kapok fibers on properties of thermoplastic cassava starch composites
Prachayawarakorn, J., Chaiwatyothin, S., Mueangta, S., & Hanchana, A. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.12.012 · Cited by 196
Zykwinska, A., Thibault, J.-F., & Ralet, M.-C. (2007) · Journal of Experimental Botany · doi:10.1093/jxb/erm037 · Cited by 196
Tensile deformation of a flax fiber
Charlet, K., Eve, S., Jernot, J. P., Gomina, M., & Breard, J. (2009) · Procedia Engineering · doi:10.1016/j.proeng.2009.06.055 · Cited by 195
Impact of climate change on wheat productivity in Central Asia
Sommer, R., Glazirina, M., Yuldashev, T., Otarov, A., Ibraeva, M., Martynova, L., Bekenov, M., Kholov, B., Ibragimov, N., Kobilov, R., et al. (2013) · Agriculture, Ecosystems & Environment · doi:10.1016/j.agee.2013.06.011 · Cited by 194
Influence of the sampling area of the stem on the mechanical properties of hemp fibers
Duval, A., Bourmaud, A., Augier, L., & Baley, C. (2010) · Materials Letters · doi:10.1016/j.matlet.2010.11.053 · Cited by 192
Self-citationMartin, N., Mouret, N., Davies, P., & Baley, C. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.06.012 · Cited by 191
Self-citationPolypropylene biocomposites reinforced with softwood, abaca, jute, and kenaf fibers
Bledzki, A. K., Franciszczak, P., Osman, Z., & Elbadawi, M. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.03.013 · Cited by 190
Zafeiropoulos, N. E., Baillie, C. A., & Matthews, F. L. (2001) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(00)00058-0 · Cited by 189
Calculation of elastic properties of natural fibers
Gassan, J., Chate, A., & Bledzki, A. K. (2001) · Journal of Materials Science · doi:10.1023/a:1017969615925 · Cited by 185
Shah, D. U., Reynolds, T. P., & Ramage, M. H. (2017) · Journal of Experimental Botany · doi:10.1093/jxb/erx245 · Cited by 184
Self-citationAmaducci, S., Zatta, A., Pelatti, F., & Venturi, G. (2008) · Field Crops Research · doi:10.1016/j.fcr.2008.02.002 · Cited by 183
Goubet, F., Jackson, P., Deery, M. J., & Dupree, P. (2002) · Analytical Biochemistry · doi:10.1006/abio.2001.5444 · Cited by 182
Effect of Steam Treatment on the Properties of Wood Cell Walls
Yin, Y., Berglund, L., & Salmén, L. (2011) · Biomacromolecules · doi:10.1021/bm101144m · Cited by 181
Enzyme-retting of flax and characterization of processed fibers
Akin, D. E., Foulk, J. A., Dodd, R. B., & McAlister, D. D. (2001) · Journal of Biotechnology · doi:10.1016/s0168-1656(01)00298-x · Cited by 181
Emerging Trends in Automotive Lightweighting through Novel Composite Materials
Pervaiz, M., Panthapulakkal, S., KC, B., Sain, M., & Tjong, J. (2016) · Materials Sciences and Applications · doi:10.4236/msa.2016.71004 · Cited by 180
Gindl, W., & Schöberl, T. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2004.04.002 · Cited by 177
Cell-Wall Polysaccharides of Developing Flax Plants
Gorshkova, T. A., Wyatt, S. E., Salnikov, V. V., Gibeaut, D. M., Ibragimov, M. R., Lozovaya, V. V., & Carpita, N. C. (1996) · Plant Physiology · doi:10.1104/pp.110.3.721 · Cited by 177
Analysis of the hemp fiber mechanical properties and their scattering (Fedora 17)
Marrot, L., Lefeuvre, A., Pontoire, B., Bourmaud, A., & Baley, C. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.09.026 · Cited by 176
Self-citationStructure and Chemical Composition of Bast Fibers Isolated from Developing Hemp Stem
Crônier, D., Monties, B., & Chabbert, B. (2005) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf051253k · Cited by 174
Ultrasonic Atomic Force Microscope with Overtone Excitation of Cantilever
Kazushi Yamanaka, K. Y., & Shizuka Nakano, S. N. (1996) · Japanese Journal of Applied Physics · doi:10.1143/jjap.35.3787 · Cited by 173
The environmental impacts of the production of hemp and flax textile yarn
van der Werf, H. M. G., & Turunen, L. (2008) · Industrial Crops and Products · doi:10.1016/j.indcrop.2007.05.003 · Cited by 172
Life cycle assessment of raw materials for non-wood pulp mills: Hemp and flax
González‐García, S., Hospido, A., Feijóo, G., & Moreira, M. T. (2010) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2010.01.011 · Cited by 168
Multi-scale morphological characterisation of flax: From the stem to the fibrils
Charlet, K., Jernot, J. P., Eve, S., Gomina, M., & Bréard, J. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.04.022 · Cited by 166
Graupner, N., Rößler, J., Ziegmann, G., & Müssig, J. (2014) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2014.04.011 · Cited by 164
Placet, V., Trivaudey, F., Cisse, O., Gucheret-Retel, V., & Boubakar, M. L. (2012) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.10.019 · Cited by 164
Self-citationExperimental micromechanical characterisation of wood cell walls
Eder, M., Arnould, O., Dunlop, J. W. C., Hornatowska, J., & Salmén, L. (2013) · Wood Science and Technology · doi:10.1007/s00226-012-0515-6 · Cited by 163
The snap point: a transition point in Linum usitatissimum bast fiber development
Gorshkova, T. A., Sal'nikov, V. V., Chemikosova, S. B., Ageeva, M. V., Pavlencheva, N. V., & van Dam, J. E. G. (2003) · Industrial Crops and Products · doi:10.1016/s0926-6690(03)00043-8 · Cited by 163
Plant Fibres for Textile and Technical Applications
Sfiligoj, M. S., Hribernik, S., Stana, K., & Kree, T. (2013) · InTech eBooks · doi:10.5772/52372 · Cited by 161
Bessadok, A., Roudeslı, S., Marais, S., Nadege, F., & Lebrun, L. (2008) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.10.018 · Cited by 157
The longitudinal Young's modulus of Pinus radiata
Cave, I. D. (1969) · Wood Science and Technology · doi:10.1007/bf00349983 · Cited by 156
Gierlinger, N., Luss, S., Konig, C., Konnerth, J., Eder, M., & Fratzl, P. (2009) · Journal of Experimental Botany · doi:10.1093/jxb/erp325 · Cited by 156
Scattering of morphological and mechanical properties of flax fibres
Charlet, K., Jernot, J., Bréard, J., & Gomina, M. (2010) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.04.015 · Cited by 155
Mechanical and thermal characterization of native brazilian coir fiber
Silva, G. G., Souza, D., Machado, J. C., & Hourston, D. J. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000516)76:7<1197::aid-app23>3.0.co;2-g · Cited by 153
Duigou, A. L., Bourmaud, A., Balnois, E., Davies, P., & Baley, C. (2012) · Industrial Crops and Products · doi:10.1016/j.indcrop.2012.02.001 · Cited by 151
Self-citationAngelini, L. G., Lazzeri, A., Levita, G., Fontanelli, D., & Bozzi, C. (2000) · Industrial Crops and Products · doi:10.1016/s0926-6690(99)00059-x · Cited by 150
Steam explosion of flax — a superior technique for upgrading fibre value
Kessler, R. W., Becker, U., Kohler, R., & Goth, B. (1998) · Biomass and Bioenergy · doi:10.1016/s0961-9534(97)10040-x · Cited by 149
Influence of the growth stage of industrial hemp on chemical and physical properties of the fibres
Keller, A., Leupin, M., Mediavilla, V., & Wintermantel, E. (2001) · Industrial Crops and Products · doi:10.1016/s0926-6690(00)00051-0 · Cited by 144
Courtin, C. M., den Broeck, H. V., & Delcour, J. A. (2000) · Journal of Chromatography A · doi:10.1016/s0021-9673(99)01064-x · Cited by 142
Xyloglucan: The Molecular Muscle of Trees
Mellerowicz, E. J., Immerzeel, P., & Hayashi, T. (2008) · Annals of Botany · doi:10.1093/aob/mcn170 · Cited by 142
Paul, S. A., Joseph, K., Mathew, G. D. G., Pothen, L. A., & Thomas, S. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.04.015 · Cited by 141
Tran, L. Q. N., Rojas, C. F., Dupont-Gillain, C. C., Vuure, A. W. V., & Verpoest, I. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.03.004 · Cited by 138
Henriksson, G., Akin, D. E., Hanlin, R. T., Rodriguez, C., Archibald, D. D., Rigsby, L. L., & Eriksson, K. (1997) · Applied and Environmental Microbiology · doi:10.1128/aem.63.10.3950-3956.1997 · Cited by 137
Secondary cell-wall assembly in flax phloem fibres: role of galactans
Gorshkova, T., & Morvan, C. (2005) · Planta · doi:10.1007/s00425-005-0118-7 · Cited by 136
Tran, L. Q. N., Minh, T. N., Rojas, C. F., Chi, T. T., Vuure, A. W. V., & Verpoest, I. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.10.064 · Cited by 133
Placet, V., Day, A., & Beaugrand, J. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-0811-5 · Cited by 132
Self-citationDevelopment of Cellulosic Secondary Walls in Flax Fibers Requires β-Galactosidase
Roach, M. J., Mokshina, N., Badhan, A., Snegireva, A. V., Hobson, N., Deyholos, M. K., & Gorshkova, T. (2011) · PLANT PHYSIOLOGY · doi:10.1104/pp.111.172676 · Cited by 128
Alix, S., Lebrun, L., Marais, S., Philippe, E., Bourmaud, A., Baley, C., & Morvan, C. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.07.035 · Cited by 127
Self-citationMechanosensing and thigmomorphogenesis, a physiological and biomechanical point of view
Coutand, C. (2010) · Plant Science · doi:10.1016/j.plantsci.2010.05.001 · Cited by 127
Identification of Vegetable Fibres
Catling, D., & Grayson, J. (1982) · doi:10.1007/978-94-011-8070-2 · Cited by 127
Bibliography Resource structure properties of natural cellulosic fibres ? an annotated bibliography
Chand, N., Tiwary, R. K., & Rohatgi, P. K. (1988) · Journal of Materials Science · doi:10.1007/bf01174659 · Cited by 127
Baltazar‐y‐Jimenez, A., Bistritz, M., Schulz, E., & Bismarck, A. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.04.028 · Cited by 126
Steam explosion of woody hemp chènevotte
Vignon, M. R., Garcia-Jaldon, C., & Dupeyre, D. (1995) · International Journal of Biological Macromolecules · doi:10.1016/0141-8130(96)81852-6 · Cited by 125
Coir Fibers: Part I: Effect of Physical and Chemical Treatments on Properties
Varma, D. S., Varma, M., & Varma, I. K. (1984) · Textile Research Journal · doi:10.1177/004051758405401206 · Cited by 122
Deformation mechanisms in polymer fibres and nanocomposites
Young, R. J., & Eichhorn, S. J. (2006) · Polymer · doi:10.1016/j.polymer.2006.11.016 · Cited by 120
Yu, Y., Jiang, Z., Fei, B., Wang, G., & Wang, H. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-4806-8 · Cited by 115
Could oleaginous flax fibers be used as reinforcement for polymers?
Pillin, I., Kervoëlen, A., Bourmaud, A., Goimard, J., Montrelay, N., & Baley, C. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2011.05.016 · Cited by 115
Self-citationBourmaud, A., Duigou, A. L., Gourier, C., & Baley, C. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.02.007 · Cited by 113
Self-citationHattalli, S., Benaboura, A., Ham-Pichavant, F., Nourmamode, A., & Castellan, A. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00022-8 · Cited by 111
Comparing Mechanical Properties of Secondary Wall and Cell Corner Middle Lamella in Spruce Wood
Wimmer, R., & Lucas, B. N. (1997) · IAWA Journal - KU Leuven/IAWA Journal · doi:10.1163/22941932-90001463 · Cited by 110
Charlet, K., Jernot, J., Gomina, M., Bréard, J., Morvan, C., & Baley, C. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.09.002 · Cited by 109
Self-citationEvaluation of elastic modulus and hardness of crop stalks cell walls by nano-indentation
Wu, Y., Wang, S., Zhou, D., Xing, C., Zhang, Y., & Cai, Z. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.10.074 · Cited by 108
Specific type of secondary cell wall formed by plant fibers
Gorshkova, T., Gurjanov, O. P., Mikshina, P. V., et al. (2010) · Russian Journal of Plant Physiology · doi:10.1134/s1021443710030040 · Cited by 107
A study of the yearly reproducibility of flax fiber tensile properties
Lefeuvre, A., Bourmaud, A., Lebrun, L., Morvan, C., & Baley, C. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.07.035 · Cited by 106
Self-citationFlax-retting by polygalacturonase-containing enzyme mixtures and effects on fiber properties
Evans, J. D., Akin, D. E., & Foulk, J. A. (2002) · Journal of Biotechnology · doi:10.1016/s0168-1656(02)00066-4 · Cited by 105
Plant density and self-thinning affect yield and quality of fibre hemp (Cannabis sativa L.)
van der Werf, H. M. G., Wijlhuizen, M., & de Schutter, J. A. A. (1995) · Field Crops Research · doi:10.1016/0378-4290(94)00103-j · Cited by 105
Mechanical processing of bast fibres: The occurrence of damage and its effect on fibre structure
Hänninen, T., Thygesen, A., Mehmood, S., Madsen, B., & Hughes, M. (2012) · Industrial Crops and Products · doi:10.1016/j.indcrop.2012.01.025 · Cited by 104
Mechanical properties of interfaces within a flax bundle – Part I: Experimental analysis
Charlet, K., & Béakou, A. (2011) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2011.08.008 · Cited by 102
The Maceration of Linen Flax under Anaerobic Conditions
Chesson, A. (1978) · Journal of Applied Bacteriology · doi:10.1111/j.1365-2672.1978.tb04217.x · Cited by 100
Gindl‐Altmutter, W., Gupta, H. S., & Grünwald, C. (2002) · Canadian Journal of Botany · doi:10.1139/b02-091 · Cited by 100
Gorshkova, T. (2000) · Annals of Botany · doi:10.1006/anbo.1999.1091 · Cited by 99
Mechanical properties of pyrolysed wood: a nanoindentation study
Zickler, G. A., Schöberl, T., & Paris, O. (2006) · The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics · doi:10.1080/14786430500431390 · Cited by 96
Soccalingame, L., Bourmaud, A., Perrin, D., Bénézet, J., & Bergeret, A. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.01.020 · Cited by 95
Self-citationModelling of effects of ultrastructural morphology on the hygroelastic properties of wood fibres
Neagu, R. C., & Gamstedt, E. K. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-1199-9 · Cited by 95
Intrusive growth of flax phloem fibers is of intercalary type
Ageeva, M. V., Petrovská, B., Kieft, H., Salnikov, V. V., Snegireva, A. V., van Dam, J. E. G., van Veenendaal, W. L. H., Emons, A. M. C., Gorshkova, T., & van Lammeren, A. A. M. (2005) · Planta · doi:10.1007/s00425-005-1536-2 · Cited by 93
A Small-Angle X-ray Scattering Study of the Effect of Hydration on the Microstructure of Flax Fibers
Astley, O. M., & Donald, A. M. (2001) · Biomacromolecules · doi:10.1021/bm005643l · Cited by 87
Gümüşkaya, E., Usta, M., & Balaban, M. (2006) · Bioresource Technology · doi:10.1016/j.biortech.2006.02.031 · Cited by 87
The effect of mechanical defects on the strength distribution of elementary flax fibres
Andersons, J. A., Poriķe, E., & Spārniņš, E. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.05.010 · Cited by 85
Martin, L., Leblanc‐Fournier, N., Julien, J., Moulia, B., & Coutand, C. (2010) · Journal of Experimental Botany · doi:10.1093/jxb/erq069 · Cited by 84
Tanguy, M., Bourmaud, A., Beaugrand, J., Gaudry, T., & Baley, C. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.11.061 · Cited by 84
Self-citationCharacterization and performance of elementary hemp fibres: Factors influencing tensile strength
Fan, M. (2010) · BioResources · doi:10.15376/biores.5.4.2307-2322 · Cited by 83
Graupner, N., Fischer, H., Ziegmann, G., & Müssig, J. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2014.05.002 · Cited by 82
Yamamoto, H., Okuyama, T., & Yoshida, M. (1993) · 木材学会誌 · Cited by 81
Superior plant based carbon fibers from electrospun poly-(caffeyl alcohol) lignin
Nar, M., Rizvi, H. R., Dixon, R. A., Chen, F., Kovalcik, A., & D’Souza, N. A. (2016) · Carbon · doi:10.1016/j.carbon.2016.02.053 · Cited by 78
Influence of flax fibre variety and year-to-year variability on composite properties
Haag, K., Padovani, J., Fita, S., Trouvé, J.-P., Pineau, C. P., Hawkins, S., Jong, H. D., Deyholos, M. K., Chabbert, B., Müssig, J., et al. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.12.028 · Cited by 78
Self-citationPollen-analytic evidence for the cultivation of Cannabis in England
Godwin, H. (1967) · Review of Palaeobotany and Palynology · doi:10.1016/0034-6667(67)90173-x · Cited by 77
Intrusive growth of sclerenchyma fibers
Snegireva, A. V., Ageeva, M. V., Amenitskii, S. I., Chernova, T., Ebskamp, M. J. M., & Gorshkova, T. (2010) · Russian Journal of Plant Physiology · doi:10.1134/s1021443710030052 · Cited by 77
Gourier, C., Bourmaud, A., Duigou, A. L., & Baley, C. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.12.003 · Cited by 77
Self-citationReiterer, A., Jakob, H. F., Stanzl‐Tschegg, S. E., & Fratzl, P. (1998) · Wood Science and Technology · doi:10.1007/bf00702790 · Cited by 76
The Orientation of Cellulose in the Secondary Wall of Tracheary Cells
Bailey, I. W., & Vestal, M. R. (1937) · Journal of the Arnold Arboretum · doi:10.5962/p.185367 · Cited by 76
Li, K., Wan, J., Wang, X., Wang, J., & Zhang, J. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.01.003 · Cited by 74
In situ observations of microscale damage evolution in unidirectional natural fibre composites
Rask, M., Madsen, B., Sørensen, B. F., Fife, J. L., Martyniuk, K., & Lauridsen, E. M. (2012) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.02.007 · Cited by 73
Analysis of retted and non retted flax fibres by chemical and enzymatic means
Mooney, C., Stolle-Smits, T., Schols, H. A., & de Jong, E. (2001) · Journal of Biotechnology · doi:10.1016/s0168-1656(01)00299-1 · Cited by 73
The use of bamboo fibres as reinforcements in composites
Khalil, H. P. S. A., Alwani, M. S., Islam, N., Suhaily, S. S., Dungani, R., H’ng, Y. M., & Jawaid, M. (2014) · Elsevier eBooks · doi:10.1533/9781782421276.4.488 · Cited by 72
Identification of Vegetable Fibres
Smith, A. W., Catling, D., & Grayson, J. (1983) · Studies in Conservation · doi:10.2307/1505970 · Cited by 72
Recycling of L-Poly-(lactide)-Poly-(butylene-succinate)-flax biocomposite
Bourmaud, A., Åkesson, D., Beaugrand, J., Duigou, A. L., Skrifvars, M., & Baley, C. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.03.018 · Cited by 67
Self-citationReiterer, A., Lichtenegger, H. C., Fratzl, P., & Stanzl‐Tschegg, S. E. (2001) · Journal of Materials Science · doi:10.1023/a:1017906400924 · Cited by 66
Snegireva, A., Chernova, T., Ageeva, M. V., Lev‐Yadun, S., & Gorshkova, T. (2015) · AoB Plants · doi:10.1093/aobpla/plv061 · Cited by 66
Structural features of galactans from flax fibres
Goubet, F., Bourlard, T., Girault, R., Alexandre, C., Vandevelde, M.-C., & Morvan, C. (1995) · Carbohydrate Polymers · doi:10.1016/0144-8617(95)00063-d · Cited by 65
Life cycle assessment of selected future energy crops for Europe
Rettenmaier, N., Köppen, S., Gärtner, S. O., & Reinhardt, G. A. (2010) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.245 · Cited by 65
Spear, M. J., Eder, A., & Carus, M. (2015) · Elsevier eBooks · doi:10.1016/b978-1-78242-454-3.00010-x · Cited by 65
Effects of decreasing carbohydrate content on properties of wood strands
Hosseinaei, O., Wang, S., Rials, T. G., Xing, C., & Zhang, Y. (2011) · Cellulose · doi:10.1007/s10570-011-9519-x · Cited by 64
Stanzl‐Tschegg, S. E., Beikircher, W., & Loidl, D. (2009) · Holzforschung · doi:10.1515/hf.2009.085 · Cited by 60
Multi-scale shear properties of flax fibre reinforced polyamide 11 biocomposites
Duigou, A. L., Bourmaud, A., Gourier, C., & Baley, C. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.03.014 · Cited by 60
Self-citationBourmaud, A., Corre, Y., & Baley, C. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.09.033 · Cited by 58
Self-citationGindl‐Altmutter, W., Martinschitz, K. J., Boesecke, P., & Kečkéš, J. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.03.020 · Cited by 55
Cromack, H. T. H. (1998) · Industrial Crops and Products · doi:10.1016/s0926-6690(97)00049-6 · Cited by 55
Characterization of acid hydrolysis of sisal
Lima, C. S. S., da Conceição, M. M., Silva, F. L. H., Lima, E. E. D., Conrado, L. D. S., & Leão, D. A. S. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.09.061 · Cited by 54
Liu, K., Takagi, H., & Yang, Z. (2012) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.09.006 · Cited by 53
The effects of growth and storage conditions on dislocations in hemp fibres
Thygesen, L. G., & Asgharipour, M. R. (2008) · Journal of Materials Science · doi:10.1007/s10853-008-2587-0 · Cited by 52
Verdus, M., Thellier, M., & Ripoll, C. (1997) · The Plant Journal · doi:10.1046/j.1365-313x.1997.12061399.x · Cited by 51
Wood and natural fiber composites current trend in consumer goods and automotive parts
Partanen, A., & Carus, M. (2016) · Reinforced Plastics · doi:10.1016/j.repl.2016.01.004 · Cited by 50
Angelini, L. G., & Tavarini, S. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.09.009 · Cited by 49
Cross-sectional area evaluation and tensile properties of alkali-treated kenaf fibres
Nitta, Y., Koichi, G. O. D. A., Noda, J., & Lee, W.-I. (2013) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.02.003 · Cited by 46
Formation of plant cell wall supramolecular structure
Gorshkova, T., Mikshina, P. V., Gurjanov, O. P., & Chemikosova, S. B. (2010) · Biochemistry (Moscow) · doi:10.1134/s0006297910020069 · Cited by 42
Ruelle, J., Beauchêne, J., Yamamoto, H., & Thibaut, B. (2010) · Wood Science and Technology · doi:10.1007/s00226-010-0323-9 · Cited by 41
Sisal fibres and their constituent non-cellulosic polymers
Stewart, D., Azzini, A., Hall, A. T., & Morrison, I. M. (1997) · Industrial Crops and Products · doi:10.1016/s0926-6690(96)00172-0 · Cited by 38
Albrecht, K., Baur, E., Endres, H., Gente, R., Graupner, N., Koch, M., Neudecker, M., Osswald, T. A., Philip, S., Wartzack, S. J., et al. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.12.022 · Cited by 38
Bacteria Responsible for the Retting of Brazilian Flax
Rosemberg, J. A. (1965) · Applied Microbiology · doi:10.1128/aem.13.6.991-992.1965 · Cited by 34
Cited by
Composites from renewable and sustainable resources: Challenges and innovations
Mohanty, A. K., Vivekanandhan, S., Pin, J.-M., & Misra, M. (2018) · Science · doi:10.1126/science.aat9072 · Cited by 1,032
Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects
Balla, V. K., Kate, K. H., Satyavolu, J., Singh, P., & Tadimeti, J. G. D. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.106956 · Cited by 580
A review of nanocellulose as a new material towards environmental sustainability
Dhali, K., Ghasemlou, M., Daver, F., Cass, P., & Adhikari, B. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.145871 · Cited by 417
Comprehensive review on nanocellulose: Recent developments, challenges and future prospects
Thomas, P., Duolikun, T., Rumjit, N. P., Moosavi, S., Lai, C. W., Bin Johan, M. R., & Fen, L. B. (2020) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2020.103884 · Cited by 304
The strength and stiffness of oriented wood and cellulose-fibre materials: A review
Jakob, M., Mahendran, A. R., Gindl-Altmutter, W., Bliem, P., Konnerth, J., Müller, U., & Veigel, S. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100916 · Cited by 292
Metadata
- Authors
- Bourmaud, A., Beaugrand, J., Shah, D. U., Placet, V., & Baley, C.
- Venue
- Progress in Materials Science
- Publisher
- Elsevier BV
- Published
- 2018-08
- Volume
- 97
- Pages
- 347-408
- ISSN
- 0079-6425 (ISSN-L)
- OpenAlex
- W2805134094
- Cited by
- 492
- References
- 211
- FWCI
- 24.20
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.