The DOI matches its Crossref record; 156 of the 156 references it cites were found in a registry or an index.
Challenges and advancement in water absorption of natural fiber-reinforced polymer composites
Open accessAbstract
Natural fibres (NFRs) composite materials are acquiring popularity in the modern world due to their eco-friendliness and superior mechanical properties. Although it has been shown that determining this is a herculean endeavour in the literature, the water absorption (WA) qualities of the natural fibre (NFR) are crucial in the progressive degradation of the features of the resulting composites. This article seeks to report exhaustively on studies pertaining to the WA attributes of polymer composites reinforced with NFRs. This article provides an overview of NFR, its characterization, and the issues related to its addition to the matrix. The primary purpose of this research study is to investigate existing studies on the problems associated with the creation of cellulosic fibre hybrid composites, water absorption, and its impact on the tensile (TS), flexural (FS), and impact strength (IS) of NFR reinforced composites. We reviewed various surface treatments (ST) applied to NFR, including alkali treatment, silane treatment, acetylation, as well as recent advancements aimed at mitigating WA, enhancing hydrophobicity, and improving the interfacial bonding (IB) between NFR and the polymer matrix (PM). Additionally, we assessed the effectiveness of utilizing nanoparticles (NAPs) in specific ST of NFR to minimize water absorption.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
A review of recent developments in natural fibre composites and their mechanical performance
Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.038 · Cited by 3,479
Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review
Li, X., Tabil, L. G., & Panigrahi, S. (2007) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0042-3 · Cited by 2,921
JOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453
Natural fiber polymer composites: A review
Saheb, D. N., & Jog, J. P. (1999) · Advances in Polymer Technology · doi:10.1002/(sici)1098-2329(199924)18:4<351::aid-adv6>3.0.co;2-x · Cited by 2,429
Silane coupling agents used for natural fiber/polymer composites: A review
Xie, Y., Hill, C. A. S., Xiao, Z., Militz, H., & Mai, C. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.03.005 · Cited by 2,244
Raghupathi, K. R., Koodali, R. T., & Manna, A. C. (2011) · Langmuir · doi:10.1021/la104825u · Cited by 2,037
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
Kabir, M. M., Wang, H., Lau, K. T., & Cardona, F. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.04.053 · Cited by 1,851
Tokiwa, Y., Calabia, B. P., Ugwu, C. U., & Aiba, S. (2009) · International Journal of Molecular Sciences · doi:10.3390/ijms10093722 · Cited by 1,782
Antibacterial activity of ZnO nanoparticle suspensions on a broad spectrum of microorganisms
Jones, N., Ray, B., Ranjit, K. T., & Manna, A. C. (2008) · FEMS Microbiology Letters · doi:10.1111/j.1574-6968.2007.01012.x · Cited by 1,712
Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization
Mwaikambo, L. Y., & Ansell, M. P. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10460 · Cited by 1,694
DHAKAL, H., ZHANG, Z., & RICHARDSON, M. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.06.019 · Cited by 1,622
Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review
Jawaid, M., & Abdul Khalil, H. P. S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.04.043 · Cited by 1,567
A review on the degradability of polymeric composites based on natural fibres
Azwa, Z. N., Yousif, B. F., Manalo, A. C., & Karunasena, W. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.11.025 · Cited by 1,530
Critical review of recent publications on use of natural composites in infrastructure
Dittenber, D. B., & GangaRao, H. V. S. (2012) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.11.019 · Cited by 1,515
Kalia, S., Kaith, B. S., & Kaur, I. (2009) · Polymer Engineering & Science · doi:10.1002/pen.21328 · Cited by 1,447
Hollaway, L. C. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.04.062 · Cited by 1,297
John, M. J., & Anandjiwala, R. D. (2008) · Polymer Composites · doi:10.1002/pc.20461 · Cited by 1,291
Nanocomposites for food packaging applications
Azeredo, H. M. C. D. (2009) · Food Research International · doi:10.1016/j.foodres.2009.03.019 · Cited by 1,259
George, J., Sreekala, M. S., & Thomas, S. (2001) · Polymer Engineering & Science · doi:10.1002/pen.10846 · Cited by 1,247
Green composites: A brief review
La Mantia, F. P., & Morreale, M. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.01.017 · Cited by 1,125
Surface modifications of natural fibers and performance of the resulting biocomposites: An overview
Mohanty, A. K., Misra, M., & Drzal, L. T. (2001) · Composite Interfaces · doi:10.1163/156855401753255422 · Cited by 1,072
Rong, M. Z., Zhang, M. Q., Liu, Y., Yang, G. C., & Zeng, H. M. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00046-x · Cited by 1,047
Native Cellulose: Structure, Characterization and Thermal Properties
Poletto, M., Ornaghi, H., & Zattera, A. (2014) · Materials · doi:10.3390/ma7096105 · Cited by 1,038
Thyavihalli Girijappa, Y. G., Mavinkere Rangappa, S., Parameswaranpillai, J., & Siengchin, S. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00226 · Cited by 1,011
M.R., S., Siengchin, S., Parameswaranpillai, J., Jawaid, M., Pruncu, C. I., & Khan, A. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.11.083 · Cited by 999
Progress Report on Natural Fiber Reinforced Composites: Progress Report on Natural Fiber Composites
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2014) · Macromolecular Materials and Engineering · doi:10.1002/mame.201300008 · Cited by 997
Biofibers from agricultural byproducts for industrial applications
Reddy, N., & Yang, Y. (2005) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.11.002 · Cited by 977
Yao, F., Wu, Q., Lei, Y., Guo, W., & Xu, Y. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.10.012 · Cited by 887
Studies on mechanical performance of biofibre/glass reinforced polyester hybrid composites
Mishra, S., Mohanty, A. K., Drzal, L. T., Misra, M., Parija, S., Nayak, S. K., & Tripathy, S. S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00084-8 · Cited by 873
Valadez-Gonzalez, A., Cervantes-Uc, J. M., Olayo, R., & Herrera-Franco, P. J. (1999) · Composites Part B: Engineering · doi:10.1016/s1359-8368(98)00054-7 · Cited by 829
Vinod, A., Sanjay, M. R., Suchart, S., & Jyotishkumar, P. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120978 · Cited by 828
Biodegradable polymers/bamboo fiber biocomposite with bio-based coupling agent
Lee, S.-H., & Wang, S. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.04.015 · Cited by 822
Cellulosic fiber reinforced cement-based composites: A review of recent research
Ardanuy, M., Claramunt, J., & Toledo Filho, R. D. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.01.035 · Cited by 746
Joseph, K., Thomas, S., & Pavithran, C. (1996) · Polymer · doi:10.1016/0032-3861(96)00144-9 · Cited by 742
Mechanical properties of sisal/oil palm hybrid fiber reinforced natural rubber composites
Jacob, M., Thomas, S., & Varughese, K. T. (2004) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00261-6 · Cited by 708
A review of bast fibres and their composites. Part 1 – Fibres as reinforcements
Summerscales, J., Dissanayake, N. P. J., Virk, A. S., & Hall, W. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.06.001 · Cited by 683
Yan, L., Kasal, B., & Huang, L. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.02.002 · Cited by 635
Cellulose Fibers: Bio- and Nano-Polymer Composites: Green Chemistry and Technology
(2011) · Springer eBooks · doi:10.1007/978-3-642-17370-7 · Cited by 626
Mascolo, M., Pei, Y., & Ring, T. (2013) · Materials · doi:10.3390/ma6125549 · Cited by 620
Composition, structure and thermal degradation of hemp cellulose after chemical treatments
Ouajai, S., & Shanks, R. A. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.01.016 · Cited by 601
Paper and Composites from Agro-Based Resources
Rowell, R. M., Young, R. A., & Rowell, J. K. (1996) · Medical Entomology and Zoology · Cited by 571
Joseph, P. (1999) · Composites Science and Technology · doi:10.1016/s0266-3538(99)00024-x · Cited by 565
The thermal and crystallisation studies of short sisal fibre reinforced polypropylene composites
Joseph, P. V., Joseph, K., Thomas, S., Pillai, C. K. S., Prasad, V. S., Groeninckx, G., & Sarkissova, M. (2003) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(02)00185-9 · Cited by 530
Bogoeva‐Gaceva, G., Avella, M., Malinconico, M., Buzarovska, A., Grozdanov, A., Gentile, G., & Errico, M. E. (2007) · Polymer Composites · doi:10.1002/pc.20270 · Cited by 521
Joseph, P. V., Rabello, M. S., Mattoso, L. H. C., Joseph, K., & Thomas, S. (2002) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00080-5 · Cited by 515
Assarar, M., Scida, D., El Mahi, A., Poilâne, C., & Ayad, R. (2011) · Materials & Design · doi:10.1016/j.matdes.2010.07.024 · Cited by 490
Sreekala, M. S., Kumaran, M. G., Joseph, S., Jacob, M., & Thomas, S. (2000) · Applied Composite Materials · doi:10.1023/a:1026534006291 · Cited by 489
Sreekala, M. S., George, J., Kumaran, M. G., & Thomas, S. (2002) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00219-6 · Cited by 482
The effects of acetylation on properties of flax fibre and its polypropylene composites
Bledzki, A. K., Mamun, A. A., Lucka-Gabor, M., & Gutowski, V. S. (2008) · Express Polymer Letters · doi:10.3144/expresspolymlett.2008.50 · Cited by 476
Xu, A., Wang, J., & Wang, H. (2010) · Green Chem. · doi:10.1039/b916882f · Cited by 439
Mechanical properties evaluation of sisal fibre reinforced polymer composites: A review
Senthilkumar, K., Saba, N., Rajini, N., Chandrasekar, M., Jawaid, M., Siengchin, S., & Alotman, O. Y. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.143 · Cited by 415
Chemical modification of henequén fibers with an organosilane coupling agent
Valadez-Gonzalez, A., Cervantes-Uc, J. M., Olayo, R., & Herrera-Franco, P. J. (1999) · Composites Part B: Engineering · doi:10.1016/s1359-8368(98)00055-9 · Cited by 414
Stark, N. M., & Matuana, L. M. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2003.11.002 · Cited by 392
Puglia, D., Biagiotti, J., & Kenny, J. M. (2005) · Journal of Natural Fibers · doi:10.1300/j395v01n03_03 · Cited by 390
The surface modification of cellulose fibres for use as reinforcing elements in composite materials
Belgacem, M. N., & Gandini, A. (2005) · Composite Interfaces · doi:10.1163/1568554053542188 · Cited by 388
Physical and mechanical properties of durable sisal fiber–cement composites
Silva, F. D. A., Filho, R. D. T., Filho, J. D. A. M., & Fairbairn, E. D. M. R. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.10.030 · Cited by 384
Xue, C.-H., Chen, J., Yin, W., Jia, S.-T., & Ma, J.-Z. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2011.10.074 · Cited by 376
Asim, M., Jawaid, M., Abdan, K., & Ishak, M. R. (2016) · Journal of Bionic Engineering · doi:10.1016/s1672-6529(16)60315-3 · Cited by 376
Study of moisture absorption in natural fiber plastic composites
WANG, W., Sain, M. M., & COOPER, P. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.07.027 · Cited by 361
Zafeiropoulos, N. E., Williams, D. R., Baillie, C. A., & Matthews, F. L. (2002) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(02)00082-9 · Cited by 359
Effects of corona discharge and UV treatment on the properties of jute-fibre epoxy composites
Gassan, J. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00168-8 · Cited by 355
Mohammed, M., Rahman, R., Mohammed, A. M., Adam, T., Betar, B. O., Osman, A. F., & Dahham, O. S. (2022) · Polymer Testing · doi:10.1016/j.polymertesting.2022.107707 · Cited by 351
Self-citationHuda, M. S., Drzal, L. T., Misra, M., & Mohanty, A. K. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.24829 · Cited by 346
Thermal stability of natural fibers and their polymer composites
Asim, M., Paridah, M. T., Chandrasekar, M., Shahroze, R. M., Jawaid, M., Nasir, M., & Siakeng, R. (2020) · Iranian Polymer Journal · doi:10.1007/s13726-020-00824-6 · Cited by 345
Effect of Chemical treatment on Flexure Properties of Natural Fiber-reinforced Polyester Composite
Rokbi, M., Osmani, H., Imad, A., & Benseddiq, N. (2011) · Procedia Engineering · doi:10.1016/j.proeng.2011.04.346 · Cited by 340
Hemath, M., Mavinkere Rangappa, S., Kushvaha, V., Dhakal, H. N., & Siengchin, S. (2020) · Polymer Composites · doi:10.1002/pc.25703 · Cited by 335
Muñoz, E., & García-Manrique, J. A. (2015) · International Journal of Polymer Science · doi:10.1155/2015/390275 · Cited by 330
Nanofiller‐reinforced polymer nanocomposites
Njuguna, J., Pielichowski, K., & Desai, S. (2008) · Polymers for Advanced Technologies · doi:10.1002/pat.1074 · Cited by 327
Thermogravimetric behavior of natural fibers reinforced polymer composites—An overview
Monteiro, S. N., Calado, V. M. D. A., Rodríguez, R. J. S., & Margem, F. M. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.05.109 · Cited by 326
Li, Y., Huang, X., Zeng, L., Li, R., Tian, H., Fu, X., Wang, Y., & Zhong, W.-H. (2019) · Journal of Materials Science · doi:10.1007/s10853-018-3006-9 · Cited by 321
Pre-treatment of Flax Fibers for use in Rotationally Molded Biocomposites
Wang, B., Panigrahi, S., Tabil, L. G., & Crerar, W. J. (2007) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684406072526 · Cited by 316
Polymer nanocomposites: A small part of the story
Schadler, L. S., Brinson, L. C., & Sawyer, W. G. (2007) · JOM · doi:10.1007/s11837-007-0040-5 · Cited by 298
Surface Modification of Natural Fibers: A Review
Cruz, J., & Fangueiro, R. M. E. S. (2016) · Procedia Engineering · doi:10.1016/j.proeng.2016.08.030 · Cited by 293
Alomayri, T. S., Assaedi, H. S., Shaikh, F. U. A., & Low, I. M. (2014) · Journal of Asian Ceramic Societies · doi:10.1016/j.jascer.2014.05.005 · Cited by 291
Chemical Composition and Mechanical Properties of Natural Fibers
Chokshi, S., Parmar, V., Gohil, P. P., & Chaudhary, V. (2020) · Journal of Natural Fibers · doi:10.1080/15440478.2020.1848738 · Cited by 291
Physical Modification of Natural Fibers and Thermoplastic Films for Composites — A Review
Mukhopadhyay, S., & Fangueiro, R. (2009) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705708091860 · Cited by 286
Suriani, M. J., Ilyas, R. A., Zuhri, M. Y. M., Khalina, A., Sultan, M. T. H., Sapuan, S. M., Ruzaidi, C. M., Wan, F. N., Zulkifli, F., Harussani, M. M., et al. (2021) · Polymers · doi:10.3390/polym13203514 · Cited by 285
Munawar, S. S., Umemura, K., & Kawai, S. (2007) · Journal of Wood Science · doi:10.1007/s10086-006-0836-x · Cited by 283
Influence of moisture absorption on the interfacial strength of bamboo/vinyl ester composites
Chen, H., Miao, M., & Ding, X. B. (2009) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.09.003 · Cited by 282
A review of bast fibres and their composites. Part 2 – Composites
Summerscales, J., Dissanayake, N., Virk, A., & Hall, W. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.05.020 · Cited by 274
Beg, M. D. H., & Pickering, K. L. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.06.012 · Cited by 270
Silva, G., Kim, S., Aguilar, R., & Nakamatsu, J. (2019) · Sustainable materials and technologies · doi:10.1016/j.susmat.2019.e00132 · Cited by 270
Sanjeevi, S., Shanmugam, V., Kumar, S., Ganesan, V., Sas, G., Johnson, D. J., Shanmugam, M., Ayyanar, A., Naresh, K., Neisiany, R. E., et al. (2021) · Scientific Reports · doi:10.1038/s41598-021-92457-9 · Cited by 265
Tensile Testing of Cellulose Based Natural Fibers for Structural Composite Applications
Symington, M. C., Banks, W. M., West, O. D., et al. (2009) · Journal of Composite Materials · doi:10.1177/0021998308097740 · Cited by 264
Preparation of zinc oxide ceramics with a sustainable antibacterial activity under dark conditions
Hirota, K., Sugimoto, M., Kato, M., Tsukagoshi, K., Tanigawa, T., & Sugimoto, H. (2010) · Ceramics International · doi:10.1016/j.ceramint.2009.09.026 · Cited by 254
Wood plastic composites weathering: Visual appearance and chemical changes
Fabiyi, J. S., McDonald, A. G., Wolcott, M. P., & Griffiths, P. R. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.05.024 · Cited by 254
Structure and properties of some vegetable fibres: Part 3Talipot and palmyrah fibres
Satyanarayana, K. G., Ravikumar, K. K., Sukumaran, K., Mukherjee, P. S., Pillai, S. G. K., & Kulkarni, A. G. (1986) · Journal of Materials Science · doi:10.1007/bf01144699 · Cited by 250
Potential Natural Fiber Polymeric Nanobiocomposites: A Review
Hasan, K. M. F., Horváth, P. G., & Alpár, T. (2020) · Polymers · doi:10.3390/polym12051072 · Cited by 244
Water sorption in oil palm fiber reinforced phenol formaldehyde composites
Sreekala, M. S., Kumaran, M. G., & Thomas, S. (2002) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(02)00032-5 · Cited by 231
Huda, M. S., Drzal, L. T., Mohanty, A. K., & Misra, M. (2008) · Composite Interfaces · doi:10.1163/156855408783810920 · Cited by 220
Water barrier properties of nanoclay filled sisal fibre reinforced epoxy composites
Mohan, T. P., & Kanny, K. M. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.12.010 · Cited by 217
Surface chemical modification of natural cellulose fibers
Baiardo, M., Frisoni, G., Scandola, M., & Licciardello, A. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.2229 · Cited by 217
Mishra, S., Naik, J., & Patil, Y. P. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00056-7 · Cited by 211
Chemical modification of flax reinforced polypropylene composites
John, M. J., & Anandjiwala, R. D. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.01.007 · Cited by 208
Mai, C., & Militz, H. (2004) · Wood Science and Technology · doi:10.1007/s00226-003-0205-5 · Cited by 204
Influence of Moisture Absorption on Mechanical Properties of Wood Flour-Polypropylene Composites
Stark, N. (2001) · Journal of Thermoplastic Composite Materials · doi:10.1106/udky-0403-626e-1h4p · Cited by 203
De Rosa, I. M., Santulli, C., & Sarasini, F. (2010) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2009.11.059 · Cited by 202
Evaluation of interfacial relaxation due to water absorption in fiber–polymer composites
Tsenoglou, C. J., Pavlidou, S., & Papaspyrides, C. D. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.02.022 · Cited by 199
17th International Conference on Composite Materials
Gibson, G. (2010) · Plastics Rubber and Composites Macromolecular Engineering · doi:10.1179/174328910x12608851832777 · Cited by 188
Atomic force microscopy characterization of the surface wettability of natural fibres
Pietak, A., Korte, S., Tan, E., Downard, A., & Staiger, M. P. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2006.07.082 · Cited by 187
Marais, S., Gouanvé, F., Bonnesoeur, A., et al. (2005) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2004.11.008 · Cited by 184
Functionalising wood by nanosol application
Mahltig, B., Swaboda, C., Roessler, A., & Böttcher, H. (2008) · Journal of Materials Chemistry · doi:10.1039/b718903f · Cited by 184
Mechanical properties of epoxy nanocomposites using titanium dioxide as reinforcement – A review
Pinto, D. G., Bernardo, L. F. A., Amaro, A. M., & Lopes, S. M. R. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.07.124 · Cited by 178
Interfacial bonding mechanisms of natural fibre-matrix composites: An overview
Mohammed, M., Rasidi, M., Mohammed, A., Rahman, R., Osman, A., Adam, T., Betar, B., & Dahham, O. (2022) · BioResources · doi:10.15376/biores.17.4.mohammed · Cited by 175
Self-citationMechanical and thermal conductivity properties of hemp fiber reinforced polyurethane composites
Sair, S., Oushabi, A., Kammouni, A., Tanane, O., Abboud, Y., & El Bouari, A. (2018) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2018.02.001 · Cited by 174
Tensile properties of chemically treated hemp fibres as reinforcement for composites
Kabir, M. M., Wang, H., Lau, K. T., & Cardona, F. (2013) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.05.048 · Cited by 170
Ultraviolet weathering of HDPE/wood-flour composites coextruded with a clear HDPE cap layer
Matuana, L. M., Jin, S., & Stark, N. M. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.10.003 · Cited by 166
Modification and Characterization of Hemp and Sisal Fibers
Hajiha, H., Sain, M. M., & Mei, L. H. I. (2014) · Journal of Natural Fibers · doi:10.1080/15440478.2013.861779 · Cited by 164
Natural Fibres in the European Automotive Industry
Karus, M., & Kaup, M. (2002) · Journal of Industrial Hemp · doi:10.1300/j237v07n01_10 · Cited by 164
A Review on Natural Fiber-Reinforced Geopolymer and Cement-Based Composites
Camargo, M., Adefrs Taye, E., Roether, J., Tilahun Redda, D., & Boccaccini, A. (2020) · Materials · doi:10.3390/ma13204603 · Cited by 163
Developments in fiber-reinforced polymer (FRP) composites for civil engineering
Uddin, N. (2013) · Woodhead Publishing Limited eBooks · doi:10.1533/9780857098955 · Cited by 162
Prasad, V., Joseph, M. A., & Sekar, K. (2018) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.09.031 · Cited by 161
Lignocellulosic fibre mediated rubber composites: An overview
Zhou, Y., Fan, M., Chen, L., & Zhuang, J. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.02.028 · Cited by 159
Ramlee, N. A., Jawaid, M., Zainudin, E. S., & Yamani, S. A. K. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.06.016 · Cited by 158
Hygrothermal ageing behaviour of a glass/epoxy composite used in wind turbine blades
Rocha, I. B. C. M., Raijmaekers, S., Nijssen, R. P. L., van der Meer, F. P., & Sluys, L. J. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.04.028 · Cited by 153
A study on moisture absorption and swelling in bio-based jute-epoxy composites
Masoodi, R., & Pillai, K. M. (2012) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684411434654 · Cited by 151
Do the unique properties of nanometals affect leachability or efficacy against fungi and termites?
Kartal, S. N., Green, F., & Clausen, C. A. (2009) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2009.01.007 · Cited by 148
Natural Fillers as Potential Modifying Agents for Epoxy Composition: A Review
Sienkiewicz, N., D., M. D. C., & Parameswaranpillai, J. (2022) · Polymers · doi:10.3390/polym14020265 · Cited by 148
Lowering the percolation threshold of conductive composites using particulate polymer microstructure
Grunlan, J. C., Gerberich, W. W., & Francis, L. F. (2001) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20010425)80:4<546::aid-app1129>3.0.co;2-0 · Cited by 147
Stark, N. M. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23035 · Cited by 122
Chung, T., Park, J., Lee, H., Kwon, H.-J., Kim, H., Lee, Y., & Tze, W. T. Y. (2018) · Applied Sciences · doi:10.3390/app8030376 · Cited by 117
Weatherability and Leach Resistance of Wood Impregnated with Nano-Zinc Oxide
Clausen, C. A., Green, F., & Kartal, S. N. (2010) · Nanoscale Research Letters · doi:10.1007/s11671-010-9662-6 · Cited by 109
Netravali, A. N., Huang, X., & Mizuta, K. (2007) · International SAMPE Symposium and Exhibition · doi:10.1163/156855107782325230 · Cited by 106
Mazur, K. E., Jakubowska, P., Romańska, P., & Kuciel, S. T. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108399 · Cited by 106
Shen, X., Wang, Q., Chen, W., & Pang, Y. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2014.09.033 · Cited by 95
Gatenholm, P., Bertilsson, H., & Mathiasson, A. (1993) · Journal of Applied Polymer Science · doi:10.1002/app.1993.070490202 · Cited by 92
Bhoopathi, R., & Ramesh, M. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01756-1 · Cited by 92
Plasma modification of cellulose fibers for composite materials
Morales, J. H., Olayo, M. G., Cruz, G. J., Herrera-Franco, P. J., & Olayo, R. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.24085 · Cited by 81
de Campos, A., Marconcini, J. M., Martins-Franchetti, S. M., & Mattoso, L. H. C. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.11.010 · Cited by 77
Hamid, M. R. Y., Ghani, M. H. A., & Ahmad, S. (2012) · Industrial Crops and Products · doi:10.1016/j.indcrop.2012.02.019 · Cited by 76
Law, T. T., & Ishak, Z. A. M. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.33184 · Cited by 70
Borba, P. M., Tedesco, A., & Lenz, D. M. (2013) · Materials Research · doi:10.1590/s1516-14392013005000203 · Cited by 66
Abdallah, H. A., Abu‐Jdayil, B., & Iqbal, M. Z. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.131242 · Cited by 64
Effect of MAPP as Coupling Agent on the Performance of Sisal–PP Composites
Mohanty, S., NAYAK, S. K., Verma, S. K., & Tripathy, S. S. (2004) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684404041711 · Cited by 62
Influence of UV Radiation on the Physical-chemical and Mechanical Properties of Banana Fiber
Benedetto, R. M. D., Gelfuso, M. V., & Thomazini, D. (2015) · Materials Research · doi:10.1590/1516-1439.371414 · Cited by 57
Bayart, M., Gauvin, F., Foruzanmehr, M. R., Elkoun, S., & Robert, M. (2017) · Fibers and Polymers · doi:10.1007/s12221-017-7123-x · Cited by 57
Mukhortova, Y. R., Pryadko, A. S., Chernozem, R. V., Pariy, I. O., Akoulina, E. A., Demianova, I. V., Zharkova, I. I., Ivanov, Y. F., Wagner, D. V., Bonartsev, A. P., et al. (2022) · Nano-Structures & Nano-Objects · doi:10.1016/j.nanoso.2022.100843 · Cited by 56
Arbelaiz, A., Txueka, U., Mezo, I., & Orue, A. (2020) · Journal of Natural Fibers · doi:10.1080/15440478.2020.1726247 · Cited by 52
Barczewski, M., Matykiewicz, D., & Szostak, M. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.09.120 · Cited by 52
Islam, M. S., Ahmad, M. B., Hasan, M., et al. (2015) · BioResources · doi:10.15376/biores.10.1.1394-1407 · Cited by 51
Turku, I., & Kärki, T. (2013) · European Journal of Wood and Wood Products · doi:10.1007/s00107-013-0754-8 · Cited by 50
Wang, X., Liu, J., & Chai, Y. (2012) · BioResources · doi:10.15376/biores.7.1.893-901 · Cited by 49
Silane-modified wood fiber filled EPDM bio-composites with improved thermomechanical properties
Chen, G., Gupta, A., & Mekonnen, T. H. (2022) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2022.107029 · Cited by 47
Water Repellent Effect and Dimension Stability of Beech Wood Impregnated with Nano-Zinc Oxide
Soltani, M., Najafi, A., Yousefian, S., et al. (2013) · BioResources · doi:10.15376/biores.8.4.6280-6287 · Cited by 46
Natural Fibre Reinforced Vinyl Ester and Vinyl Polymer Composites
(2018) · Elsevier eBooks · doi:10.1016/c2016-0-03362-4 · Cited by 42
Dual-functional natural-fiber reinforced composites by incorporating magnetite
Xia, C., Wang, K., Dong, Y., Zhang, S., Shi, S. Q., Cai, L., Ren, H. T., Zhang, H., & Li, J. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.03.016 · Cited by 40
Kivade, S. B., Gunge, A., Nagamadhu, M., & Rajole, S. (2021) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-021-00247-8 · Cited by 37
Tshabalala, M. A., Libert, R., & Schaller, C. M. (2010) · Holzforschung · doi:10.1515/hf.2011.022 · Cited by 36
Amjad, A., Awais, H., Anjang, A., & Abidin, M. J. Z. (2021) · Advanced Composite Materials · doi:10.1080/09243046.2021.1993563 · Cited by 36
Trăistaru, A. A. T., Sandu, I. C. A., Sandu, I. C. A., Timar, M. C., Dumitrescu, G. L., Sandu, I., & Sandu, I. (2012) · Microscopy Research and Technique · doi:10.1002/jemt.22155 · Cited by 32
Siengchin, S., & Dangtungee, R. (2014) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705714526916 · Cited by 24
Jiang, Q., Pei, X., Wu, L., Li, T., & Lin, J. (2018) · Advances in Polymer Technology · doi:10.1002/adv.21968 · Cited by 19
Li, Z., Wang, Y., Cheng, L., Guo, W., & Wu, G. (2016) · Journal of Wood Chemistry and Technology · doi:10.1080/02773813.2016.1235586 · Cited by 15
Musa, L., Rozyanty, A. R., & Zhafer, S. F. (2018) · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena · doi:10.4028/www.scientific.net/ssp.280.353 · Cited by 14
Metadata
- Authors
- Mohammed, M., Jawad, A. J. M., Mohammed, A. M., Oleiwi, J. K., Adam, T., Osman, A. F., Dahham, O. S., Betar, B. O., Gopinath, S. C. B., & Jaafar, M.
- Venue
- Polymer Testing
- Publisher
- Elsevier BV
- Published
- 2023-07
- Volume
- 124
- Pages
- 108083
- ISSN
- 0142-9418 (ISSN-L)
- OpenAlex
- W4379800371
- Cited by
- 418
- References
- 156
- FWCI
- 31.12
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.