The DOI matches its Crossref record; 78 of the 78 references it cites were found in a registry or an index.
A review of the process physics and material screening methods for polymer powder bed fusion additive manufacturing
Abstract
Abstract Powder bed fusion (PBF) is one of seven different classes of additive manufacturing (AM) technologies identified by ASTM and ISO. In polymer PBF, an infra-red energy source selectively fuses powder particles layer-by-layer into a three-dimensional structure. This enables the production of parts without the use of a mold, which is useful for prototyping and low-volume production. The early research in polymer PBF has focused largely on exploring the expanded design space afforded by the technology and modeling the heat transfer during fabrication. These are aspects that emphasize the manufacturing process and resultant quality in a material agnostic manner. Early investigations into structure-process-property relationships focused on the industrially dominant polyamide family. Only recently has research been conducted towards expanding the PBF material portfolio beyond nylon-12 and its composites. Guiding this research is the knowledge gained from studying the behavior of polyamides in PBF, which resulted in pervasive guidelines for material screening and process parameter development in polymer PBF, including the concepts of a “stable sintering region” and utilizing the “energy melt ratio” to set machine parameters. However, these guidelines are largely empirical and disproportionately focus on process parameter effects on the mechanical properties of the printed parts, instead of the intrinsic polymer properties and first principles of polymer science and engineering. This review categorically compiles the PBF AM literature by the three process sub-functions: powder recoating, energy input, and coalescence and cooling. The literature outlining the governing physics, structure-property-processing relationships enabling printing, and the process-structure-property relationships enabling targeted final part properties are discussed within each sub-function. Establishing these polymer-manufacturing relationships, both for printability and for final part property prediction, is important to aid in the identification and adaptation of existing polymers, and development of novel polymers, for PBF AM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reaction Kinetics in Differential Thermal Analysis
Kissinger, H. E. (1957) · Analytical Chemistry · doi:10.1021/ac60131a045 · Cited by 13,196
Odian, G. (2004) · doi:10.1002/047147875x · Cited by 7,158
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Self-citation3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth, J.-P., Levy, G., Klocke, F., & Childs, T. H. C. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.004 · Cited by 1,444
Predictive Self-Assembly of Polyhedra into Complex Structures
Damasceno, P. F., Engel, M., & Glotzer, S. C. (2012) · Science · doi:10.1126/science.1220869 · Cited by 1,095
Materials for additive manufacturing
Bourell, D., Kruth, J. P., Leu, M., Levy, G., Rosen, D., Beese, A. M., & Clare, A. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.009 · Cited by 1,034
Laser sintering of polyamides and other polymers
Goodridge, R. D., Tuck, C. J., & Hague, R. J. M. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.04.001 · Cited by 835
Lasers and materials in selective laser sintering
Kruth, J. P., Wang, X., Laoui, T., & Froyen, L. (2003) · Assembly Automation · doi:10.1108/01445150310698652 · Cited by 826
Shirazi, S. F. S., Gharehkhani, S., Mehrali, M., Yarmand, H., Metselaar, H. S. C., Adib Kadri, N., & Osman, N. A. A. (2015) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/16/3/033502 · Cited by 755
Rapid Manufacturing: An Industrial Revolution for the Digital Age
(2005) · Wiley eBooks · doi:10.1002/0470033991 · Cited by 679
Laser based additive manufacturing in industry and academia
Schmidt, M., Merklein, M., Bourell, D., Dimitrov, D., Hausotte, T., Wegener, K., Overmeyer, L., Vollertsen, F., & Levy, G. N. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.011 · Cited by 602
Dependence of mechanical properties of polyamide components on build parameters in the SLS process
Caulfield, B., McHugh, P. E., & Lohfeld, S. (2007) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2006.09.007 · Cited by 598
Absorptance of powder materials suitable for laser sintering
Tolochko, N. K., Khlopkov, Y. V., Mozzharov, S. E., Ignatiev, M. B., Laoui, T., & Titov, V. I. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010337029 · Cited by 518
Material properties and fabrication parameters in selective laser sintering process
Gibson, I., & Shi, D. (1997) · Rapid Prototyping Journal · doi:10.1108/13552549710191836 · Cited by 488
Selective laser sintering in biomedical engineering
Mazzoli, A. (2013) · Medical & Biological Engineering & Computing · doi:10.1007/s11517-012-1001-x · Cited by 469
Thermal decomposition of aliphatic nylons
Levchik, S. V., Weil, E. D., & Lewin, M. (1999) · Polymer International · doi:10.1002/(sici)1097-0126(199907)48:7<532::aid-pi214>3.0.co;2-r · Cited by 409
Selective laser sintering: A qualitative and objective approach
Kumar, S. (2003) · JOM · doi:10.1007/s11837-003-0175-y · Cited by 398
Calculation of laser absorption by metal powders in additive manufacturing
Boley, C. D., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Optics · doi:10.1364/ao.54.002477 · Cited by 371
Leturia, M., Benali, M., Lagarde, S., Ronga, I., & Saleh, K. (2014) · Powder Technology · doi:10.1016/j.powtec.2013.11.045 · Cited by 350
Evaluation of the packing characteristics of mono-sized non-spherical particles
Zou, R. P., & Yu, A. B. (1996) · Powder Technology · doi:10.1016/0032-5910(96)03106-3 · Cited by 337
Haeri, S., Wang, Y., Ghita, O., & Sun, J. (2017) · Powder Technology · doi:10.1016/j.powtec.2016.11.002 · Cited by 322
Additive Processing of Polymers
Wendel, B., Rietzel, D., Kühnlein, F., Feulner, R., Hülder, G., & Schmachtenberg, E. (2008) · Macromolecular Materials and Engineering · doi:10.1002/mame.200800121 · Cited by 314
Bourell, D. L., Leu, M. C., & Rosen, D. W. (2009) · Cited by 304
Effects of processing on microstructure and properties of SLS Nylon 12
Zarringhalam, H., Hopkinson, N., Kamperman, N. F., & de Vlieger, J. J. (2006) · Materials Science and Engineering: A · doi:10.1016/j.msea.2006.07.084 · Cited by 295
Yuan, S., Shen, F., Bai, J., Chua, C. K., Wei, J., & Zhou, K. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.098 · Cited by 295
Powder flowability and density ratios: the impact of granules packing
Santomaso, A. C., Lazzaro, P., & Canu, P. (2003) · Chemical Engineering Science · doi:10.1016/s0009-2509(03)00137-4 · Cited by 292
Characterization of powder flow: Static and dynamic testing
Krantz, M. J., Zhang, H., & Zhu, J. (2009) · Powder Technology · doi:10.1016/j.powtec.2009.05.001 · Cited by 289
Modification of Frenkel's model for sintering
Pokluda, O., Bellehumeur, C. T., & Vlachopoulos, J. (1997) · AIChE Journal · doi:10.1002/aic.690431213 · Cited by 281
Materials perspective of polymers for additive manufacturing with selective laser sintering
Schmid, M., Amado, A., & Wegener, K. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.138 · Cited by 256
Processing of a Polyamide-12/carbon nanofibre composite by laser sintering
Goodridge, R. D., Shofner, M. L., Hague, R. J. M., McClelland, M., Schlea, M. R., Johnson, R. B., & Tuck, C. J. (2011) · Polymer Testing · doi:10.1016/j.polymertesting.2010.10.011 · Cited by 234
Polymer powders for selective laser sintering (SLS)
Schmid, M., Amado, A., & Wegener, K. (2015) · AIP Conference Proceedings · doi:10.1063/1.4918516 · Cited by 231
Recycling of polyamide 12 based powders in the laser sintering process
Dotchev, K., & Yusoff, W. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910960299 · Cited by 229
Advances in modeling the effects of selected parameters on the SLS process
Williams, J. D., & Deckard, C. R. (1998) · Rapid Prototyping Journal · doi:10.1108/13552549810210257 · Cited by 228
Improving accuracy through shrinkage modelling by using Taguchi method in selective laser sintering
Raghunath, N., & Pandey, P. M. (2007) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2006.07.001 · Cited by 212
Characterization of polyamide powders for determination of laser sintering processability
Verbelen, L., Dadbakhsh, S., Van den Eynde, M., Kruth, J.-P., Goderis, B., & Van Puyvelde, P. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.12.014 · Cited by 208
Effect of PA12 powder reuse on coalescence behaviour and microstructure of SLS parts
Dadbakhsh, S., Verbelen, L., Verkinderen, O., Strobbe, D., Van Puyvelde, P., & Kruth, J.-P. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.05.014 · Cited by 204
O’Connor, H. J., Dickson, A. N., & Dowling, D. P. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.05.035 · Cited by 185
Performance Limitations in Polymer Laser Sintering
Bourell, D. L., Watt, T. J., Leigh, D. K., & Fulcher, B. (2014) · Physics Procedia · doi:10.1016/j.phpro.2014.08.157 · Cited by 184
Model of the selective laser sintering of bisphenol-A polycarbonate
Nelson, J. C., Xue, S., Barlow, J. W., Beaman, J. J., Marcus, H. L., & Bourell, D. L. (1993) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00022a014 · Cited by 177
Athreya, S. R., Kalaitzidou, K., & Das, S. (2010) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.12.028 · Cited by 175
Peyre, P., Rouchausse, Y., Defauchy, D., & Régnier, G. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.04.030 · Cited by 172
Effects of energy density on morphology and properties of selective laser sintered polycarbonate
Ho, H. C. H., Gibson, I., & Cheung, W. L. (1999) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(99)00007-2 · Cited by 167
Yan, M., Tian, X., Peng, G., Li, D., & Zhang, X. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.06.023 · Cited by 155
Additive Manufacturing: Polymers Applicable for Laser Sintering (LS)
Schmid, M., & Wegener, K. (2016) · Procedia Engineering · doi:10.1016/j.proeng.2016.06.692 · Cited by 152
Investigating mechanical anisotropy and end-of-vector effect in laser-sintered nylon parts
Ajoku, U., Saleh, N., Hopkinson, N., Hague, R., & Erasenthiran, P. (2006) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/09544054jem537 · Cited by 140
Density prediction of crystalline polymer sintered parts at various powder bed temperatures
Tontowi, A. E., & Childs, T. H. C. (2001) · Rapid Prototyping Journal · doi:10.1108/13552540110395637 · Cited by 137
Processability of PEEK, a new polymer for High Temperature Laser Sintering (HT-LS)
Berretta, S., Evans, K., & Ghita, O. R. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.04.003 · Cited by 136
Athreya, S. R., Kalaitzidou, K., & Das, S. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.12.028 · Cited by 135
Sillani, F., Kleijnen, R. G., Vetterli, M., Schmid, M., & Wegener, K. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.02.004 · Cited by 133
Klein, R. (2011) · Wiley eBooks · doi:10.1002/9783527636969 · Cited by 122
Beal, V. E., Paggi, R. A., Salmoria, G. V., & Lago, A. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30329 · Cited by 115
Crystallization Kinetics of Polyamide 12 during Selective Laser Sintering
Zhao, M., Wudy, K., & Drummer, D. (2018) · Polymers · doi:10.3390/polym10020168 · Cited by 108
Annealing effects on the crystallinity of polyetheretherketone (PEEK) and its carbon fiber composite
Östberg, G., & Seferis, J. C. (1987) · Journal of Applied Polymer Science · doi:10.1002/app.1987.070330103 · Cited by 106
An empirical study into laser sintering of ultra-high molecular weight polyethylene (UHMWPE)
Goodridge, R., Hague, R., & Tuck, C. J. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.08.016 · Cited by 105
Predicting processing parameters in high temperature laser sintering (HT-LS) from powder properties
Berretta, S., Evans, K. E., & Ghita, O. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.04.097 · Cited by 87
Bai, J., Zhang, B., Song, J., Bi, G., Wang, P., & Wei, J. (2016) · Polymer Testing · doi:10.1016/j.polymertesting.2016.04.004 · Cited by 85
Anisotropy, homogeneity and ageing in an SLS polymer
Cooke, W., Tomlinson, R. A., Burguete, R. L., Johns, D., & Vanard, G. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111138397 · Cited by 82
Multi Jet Fusion PA12 Manufacturing Parameters for Watertightness, Strength and Tolerances
Planas, S. M., Minguella-Canela, J., Llumà, J., Travieso-Rodriguez, J. A., & García‐Granada, A. (2018) · Materials · doi:10.3390/ma11081472 · Cited by 82
Effects of graphite powder on the laser sintering behaviour of polycarbonate
Ho, H. C. H., Cheung, W. L., & Gibson, I. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441148 · Cited by 78
Process Monitoring in Laser Sintering Using Thermal Imaging
Wegner, A., & Witt, G. (2011) · doi:10.26153/tsw/15303 · Cited by 73
Sintering force behind the viscous sintering of two particles
Wakai, F., Katsura, K., Kanchika, S., Shinoda, Y., Akatsu, T., & SHINAGAWA, K. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.03.006 · Cited by 66
Analysis of the material properties involved in laser sintering of thermoplastic polyurethane
Verbelen, L., Dadbakhsh, S., den Eynde, M. V., Strobbe, D., Kruth, J., Goderis, B., & Puyvelde, P. V. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.03.001 · Cited by 66
Preparation of PA12 microspheres with tunable morphology and size for use in SLS processing
Wang, G., Wang, P., Zhen, Z., Zhang, W., & Ji, J. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.08.083 · Cited by 59
Modeling of Laser Beam Absorption in a Polymer Powder Bed
Osmanlic, F., Wudy, K., Laumer, T., Schmidt, M., Drummer, D., & Körner, C. (2018) · Polymers · doi:10.3390/polym10070784 · Cited by 59
Computation of Effective Thermal Conductivity of Powders for Selective Laser Sintering Simulations
Moser, D. R., Pannala, S., & Murthy, J. Y. (2016) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.4033351 · Cited by 56
New Polymer Materials for the Laser Sintering Process: Polypropylene and Others
Wegner, A. (2016) · Physics Procedia · doi:10.1016/j.phpro.2016.08.105 · Cited by 53
Experimental investigations of curling phenomenon in selective laser sintering process
Mousa, A. A. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2013-0132 · Cited by 47
Study of the selective laser sintering of polycarbonate and postprocess for parts reinforcement
Shi, Y., Chen, J., Wang, Y., Li, Z., & Huang, S. (2007) · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · doi:10.1243/14644207jmda65 · Cited by 44
High Speed Sintering - Early Research into a New Rapid Manufacturing Process
Hopkinson, N., & Erasenthiran, P. (2004) · doi:10.26153/tsw/6998 · Cited by 40
Aging behavior of thermoplastic elastomers in the laser sintering process
Ziegelmeier, S., Wöllecke, F., Tuck, C. J., Goodridge, R., & Hague, R. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.172 · Cited by 39
Polymer Powder Production for Laser Melting Through Immiscible Blends
Drummer, D., Medina-Hernández, M., Drexler, M., & Wudy, K. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.01.332 · Cited by 32
Li, J., Schultz, J. M., & Chan, C. (2015) · Polymer · doi:10.1016/j.polymer.2015.02.049 · Cited by 30
Effect of infra‐red power level on the sintering behaviour in the high speed sintering process
Majewski, C., Oduye, D., Thomas, H. R., & Hopkinson, N. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810878012 · Cited by 29
Materials for high speed sintering
Ellis, A., Noble, C. J., Hartley, L., Lestrange, C., Hopkinson, N., & Majewski, C. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.156 · Cited by 28
Study of the relationship between particle sizes of polymer powders and their radiative properties
Papini, M. (1993) · Infrared Physics · doi:10.1016/0020-0891(93)90119-r · Cited by 12
Cited by
3D printing of polymer composites: Materials, processes, and applications
Park, S., Shou, W., Makatura, L., Matusik, W., & Fu, K. (. (2022) · Matter · doi:10.1016/j.matt.2021.10.018 · Cited by 562
3D printing: Principles and pharmaceutical applications of selective laser sintering
Awad, A., Fina, F., Goyanes, A., Gaisford, S., & Basit, A. W. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119594 · Cited by 371
Alami, A. H., Ghani Olabi, A., Alashkar, A., Alasad, S., Aljaghoub, H., Rezk, H., & Abdelkareem, M. A. (2023) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2023.102516 · Cited by 349
A review of various materials for additive manufacturing: Recent trends and processing issues
Srivastava, M., Rathee, S., Patel, V., Kumar, A., & Koppad, P. G. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.10.015 · Cited by 311
Review of High-Performance Sustainable Polymers in Additive Manufacturing
Chyr, G., & DeSimone, J. M. (2023) · Green Chemistry · doi:10.1039/d2gc03474c · Cited by 136
Metadata
- Authors
- Chatham, C. A., Long, T. E., & Williams, C. B.
- Venue
- Progress in Polymer Science
- Publisher
- Elsevier BV
- Published
- 2019-06
- Volume
- 93
- Pages
- 68-95
- ISSN
- 0079-6700 (ISSN-L)
- OpenAlex
- W2922999625
- Cited by
- 305
- References
- 78
- FWCI
- 14.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.