The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Life cycle environmental impacts of chemical recycling via pyrolysis of mixed plastic waste in comparison with mechanical recycling and energy recovery
Open accessAbstract
A large portion of plastic produced each year is used to make single-use packaging and other short-lived consumer products that are discarded quickly, creating significant amounts of waste. It is important that such waste be managed appropriately in line with circular-economy principles. One option for managing plastic waste is chemical recycling via pyrolysis, which can convert it back into chemical feedstock that can then be used to manufacture virgin-quality polymers. However, given that this is an emerging technology not yet used widely in practice, it is not clear if pyrolysis of waste plastics is sustainable on a life cycle basis and how it compares to other plastics waste management options as well as to the production of virgin plastics. Therefore, this study uses life cycle assessment (LCA) to compare the environmental impacts of chemical recycling of mixed plastic waste (MPW) via pyrolysis with the established waste management alternatives: mechanical recycling and energy recovery. Three LCA studies have been carried out under three perspectives: waste, product and a combination of the two. To ensure robust comparisons, the impacts have been estimated using two impact assessment methods: Environmental footprint and ReCiPe. The results suggest that chemical recycling via pyrolysis has a 50% lower climate change impact and life cycle energy use than the energy recovery option. The climate change impact and energy use of pyrolysis and mechanical recycling of MPW are similar if the quality of the recyclate is taken into account. Furthermore, MPW recycled by pyrolysis has a significantly lower climate change impact (−0.45 vs 1.89 t CO2 eq./t plastic) than the equivalent made from virgin fossil resources. However, pyrolysis has significantly higher other impacts than mechanical recycling, energy recovery and production of virgin plastics. Sensitivity analyses show that some assumptions have notable effects on the results, including the assumed geographical region and its energy mix, carbon conversion efficiency of pyrolysis and recyclate quality. These results will be of interest to the chemical, plastics and waste industries, as well as to policy makers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Plastic waste inputs from land into the ocean
Jambeck, J. R., Geyer, R., Wilcox, C., Siegler, T. R., Perryman, M., Andrady, A., Narayan, R., & Law, K. L. (2015) · Science · doi:10.1126/science.1260352 · Cited by 13,163
Mechanical and chemical recycling of solid plastic waste
Ragaert, K., Delva, L., & Van Geem, K. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.044 · Cited by 3,276
National Cancer Institute (2020) · Definitions · doi:10.32388/bz83sn · Cited by 2,981
The impact of debris on marine life
Gall, S. C., & Thompson, R. C. (2015) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2014.12.041 · Cited by 2,187
Plastic waste in the marine environment: A review of sources, occurrence and effects
LI, W. C., TSE, H. F., & FOK, L. (2016) · Science of The Total Environment · doi:10.1016/j.scitotenv.2016.05.084 · Cited by 1,769
Chemical recycling to monomer for an ideal, circular polymer economy
Coates, G. W., & Getzler, Y. D. Y. L. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0190-4 · Cited by 1,644
Recycling of plastic solid waste: A state of art review and future applications
Singh, N., Hui, D., Singh, R., Ahuja, I. P. S., Feo, L., & Fraternali, F. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.09.013 · Cited by 1,211
Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
Gallo, F., Fossi, C., Weber, R., Santillo, D., Sousa, J., Ingram, I., Nadal, A., & Romano, D. (2018) · Environmental Sciences Europe · doi:10.1186/s12302-018-0139-z · Cited by 787
Methods of Recycling, Properties and Applications of Recycled Thermoplastic Polymers
Grigore, M. (2017) · Recycling · doi:10.3390/recycling2040024 · Cited by 523
Technologies for chemical recycling of household plastics – a technical review and TRL assessment
Solis, M., & Silveira, S. (2020) · Waste Management · doi:10.1016/j.wasman.2020.01.038 · Cited by 451
Lazarevic, D., Aoustin, E., Buclet, N., & Brandt, N. (2010) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2010.09.014 · Cited by 426
Meys, R., Frick, F., Westhues, S., Sternberg, A., Klankermayer, J., & Bardow, A. (2020) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2020.105010 · Cited by 390
A circular economy approach to plastic waste
Payne, J., McKeown, P., & Jones, M. D. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.05.014 · Cited by 385
Huijbregts, M. A. J., Steinmann, Z. J. N., Elshout, P. M. F., Stam, G., Verones, F., Vieira, M. D. M., Hollander, A., Zijp, M. C., & van Zelm, R. (2016) · Cited by 384
Sustainability of reusable packaging–Current situation and trends
Coelho, P. M., Corona, B., ten Klooster, R., & Worrell, E. (2020) · Resources, Conservation & Recycling: X · doi:10.1016/j.rcrx.2020.100037 · Cited by 381
Perugini, F., Mastellone, M. L., & Arena, U. (2005) · Environmental Progress · doi:10.1002/ep.10078 · Cited by 347
LCA of plastic waste recovery into recycled materials, energy and fuels in Singapore
Khoo, H. H. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.02.010 · Cited by 286
Plastic waste as a fuel - CO2-neutral or not?
Eriksson, O., & Finnveden, G. (2009) · Energy & Environmental Science · doi:10.1039/b908135f · Cited by 272
Mechanical reprocessing of polyolefin waste: A review
Yin, S., Tuladhar, R., Shi, F., Shanks, R. A., Combe, M., & Collister, T. (2015) · Polymer Engineering & Science · doi:10.1002/pen.24182 · Cited by 246
Plastic Solid Waste (PSW) in the Context of Life Cycle Assessment (LCA) and Sustainable Management
Antelava, A., Damilos, S., Hafeez, S., Manos, G., Al-Salem, S. M., Sharma, B. K., Kohli, K., & Constantinou, A. (2019) · Environmental Management · doi:10.1007/s00267-019-01178-3 · Cited by 222
Demetrious, A., & Crossin, E. (2019) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-019-00842-4 · Cited by 179
Somoza-Tornos, A., González-Garay, A., Pozo, C., Graells, M., Espuña, A., & Guillén‐Gosálbez, G. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b04835 · Cited by 135
Gear, M., Sadhukhan, J., Thorpe, R. B., Clift, R., SEVILLE, J. P. K., & Keast, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.01.015 · Cited by 126
Assessment of toxicological risks for life cycle assessment and eco-efficiency analysis
Landsiedel, R., & Saling, P. R. (2002) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02978885 · Cited by 74
Plastics recycling: insights into life cycle impact assessment methods
Rajendran, S., Hodzic, A., Scelsi, L., Hayes, S. A., Soutis, C., Al-Maadeed, S. A., & Kahraman, R. (2013) · Plastics Rubber and Composites Macromolecular Engineering · doi:10.1179/1743289812y.0000000002 · Cited by 56
Gracida-Alvarez, U. R., Winjobi, O., Sacramento‐Rivero, J. C., & Shonnard, D. R. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b04764 · Cited by 50
Jeswani, H. K., Krüger, C., Kicherer, A., Antony, F., & Azapagic, A. (2019) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2019.06.088 · Cited by 28
Self-citation
Cited by
Expanding plastics recycling technologies: chemical aspects, technology status and challenges
Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616
Achieving net-zero greenhouse gas emission plastics by a circular carbon economy
Meys, R., Kätelhön, A., Bachmann, M., Winter, B., Zibunas, C., Suh, S., & Bardow, A. (2021) · Science · doi:10.1126/science.abg9853 · Cited by 577
Depolymerization within a Circular Plastics System
Clark, R. A., & Shaver, M. P. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00739 · Cited by 408
Vogt, E. T. C., & Weckhuysen, B. M. (2024) · Nature · doi:10.1038/s41586-024-07322-2 · Cited by 360
Polyethylene terephthalate (PET) recycling: A review
Muringayil Joseph, T., Azat, S., Ahmadi, Z., Moini Jazani, O., Esmaeili, A., Kianfar, E., Haponiuk, J., & Thomas, S. (2024) · Case Studies in Chemical and Environmental Engineering · doi:10.1016/j.cscee.2024.100673 · Cited by 357
Metadata
- Authors
- Jeswani, H., Krüger, C., Russ, M., Horlacher, M., Antony, F., Hann, S., & Azapagic, A.
- Venue
- Science of The Total Environment
- Publisher
- Elsevier BV
- Published
- 2021-05
- Volume
- 769
- Pages
- 144483
- ISSN
- 0048-9697 (ISSN-L)
- OpenAlex
- W3121126758
- Cited by
- 625
- References
- 29
- FWCI
- 49.08
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.