CoChat

Solvent extraction fractionation of Li-ion battery leachate containing Li, Ni, and Co

Open access
Virolainen, Sami, Fallah Fini, Mojtaba, Laitinen, Antero, Sainio, Tuomo · 2017 · Separation and Purification Technology
Cited by 143

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Abstract

In this research, the separation of Li, Ni, and Co by solvent extraction was studied from synthetic Li-ion battery waste leachate. The purpose was to propose a process for producing all the metals with over 99.5% purities, as the purity demands for battery grade metals are high. Emphasis was also placed on obtaining pure Li raffinate in the early stage of the process, as societal interest in Li is growing rapidly. Thus, the purpose was to first extract Co and Ni selectively yielding pure Li raffinate, and consequently separating Co and Ni as pure products in the stripping stage. The equilibrium behavior of the separation system was studied by constructing the pH isotherms as well as loading and stripping isotherms. Bis(2,4,4-trimethylpentyl)phosphinic acid (Cyanex 272) and (2-ethylhexyl)phosphonic acid mono-2-ethylhexyl ester (PC-88A) were used as extractants, both as unmodified and modified with 5% v/v TOA or TBP. Based on the equilibrium results, bench-scale continuous counter-current separation experiments were designed and conducted using 1.0 M Cyanex 272 modified with 5% v/v TOA. Co and Ni were loaded in two stages from the sulfate feed solution containing 2.8 g/L of Li, 14.4 g/L of Co, and 0.5 g/L of Ni. In this step, over 99.6% yields for Co and Ni were achieved, giving 99.9% pure Li raffinate. However, 17–26% of Li was co-extracted, but efficient scrubbing with NiSO 4 was designed with equilibrium experiments and demonstrated in continuous operation. In the stripping step, 99.5% pure aqueous Ni solution and 99.2% pure organic Co solution were obtained using two counter-current stages. Adding one more stage increased the Ni and Co purities to 99.7 and 99.6%, respectively. In addition to the high purities of the metals, the suggested process has fewer process steps compared to previously suggested flowsheets for similar fractionation.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.seppur.2017.02.010

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 1 references

Cited by

Metadata

Authors
Virolainen, S., Fallah Fini, M., Laitinen, A., & Sainio, T.
Venue
Separation and Purification Technology
Publisher
Elsevier BV
Published
2017-05
Volume
179
Pages
274-282
ISSN
1383-5866 (ISSN-L)
OpenAlex
W2587419314
Cited by
143
References
1
FWCI
6.96
Type
journal article
Language
en
Open access
green

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.