The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
4D printing: Recent advances and proposals in the food sector
Abstract
Abstract Background 4D printing technology has attracted extensive attention in academic and industrial circles since 2013 although commercialization still requires additional research and development. 4D food printing is an extension of 3D printing, which permits customization of new food products. Compared with aerospace, automobile, robotics, biomedicine and materials etc, there are few reviews on 4D food printing. Scope and approach This review shows recent advances in 4D printing technology applied to foods. To adapt current 4D printing technology to foods it is necessary to improve the extrusion printer and develop the necessary software. Aspects of recombination of different food materials and reasons of alterations in color, shape, flavor and nutrition via 4D food printing are discussed critically. The key to the success of 4D food printing and diverse solutions to the corresponding problems are outlined and analyzed. Future prospects for 4D food printing technology are discussed along with research and development needs. Key findings and conclusions At present, 4D food printing experiment is mainly based on soy protein isolate, starch and hydrogels and is realized through material properties, internal structural design and spatial arrangement of recombined food materials. The stimulation factors responsible for causing alteration of 3D printed products include pH, water absorption, microwave and temperature, resulting in deformation, modification of color, flavor and nutritional value. It is noteworthy that 4D food printing is still at research stage. There are opportunities for enhancement in the link between internal structure and stimulation, design of the printer, printing software, printing materials as well as evaluation of the properties of the printed foods.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing
Lind, J. U., Busbee, T. A., Valentine, A. D., Pasqualini, F. S., Yuan, H., Yadid, M., Park, S.-J., Kotikian, A., Nesmith, A. P., Campbell, P. H., et al. (2017) · Nature Materials · doi:10.1038/nmat4782 · Cited by 863
3D printed reversible shape changing components with stimuli responsive materials
Mao, Y., Ding, Z., Yuan, C., Ai, S., Isakov, M., Wu, J., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24761 · Cited by 348
Dick, A., Bhandari, B., & Prakash, S. (2019) · Meat Science · doi:10.1016/j.meatsci.2019.03.005 · Cited by 264
Review of 4D printing materials and their properties
Shin, D.-G., Kim, T.-H., & Kim, D.-E. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0040-z · Cited by 183
Guo, C.-F., Zhang, M., & Bhandari, B. (2019) · Computers and Electronics in Agriculture · doi:10.1016/j.compag.2019.04.032 · Cited by 118
Self-citationVancauwenberghe, V., Verboven, P., Lammertyn, J., & Nicolaï, B. (2018) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2018.01.008 · Cited by 96
Cited by
Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
3D printing to innovate biopolymer materials for demanding applications: A review
Li, N., Qiao, D., Zhao, S., Lin, Q., Zhang, B., & Xie, F. (2021) · Materials Today Chemistry · doi:10.1016/j.mtchem.2021.100459 · Cited by 142
Towards the development of foods 3D printer: Trends and technologies for foods printing
Neamah, H. A., & Tandio, J. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e33882 · Cited by 43
“Some of the applications of 4D printing are identification of product decomposition by changing color [16,31], smaller packaging [32], better control of dimensional stability after dehydrated [15], and alteration of structure for artificial tissues [33].”
BackgroundMethodInfluential
Metadata
- Authors
- Teng, X., Zhang, M., & Mujumdar, A. S.
- Venue
- Trends in Food Science & Technology
- Publisher
- Elsevier BV
- Published
- 2021-04
- Volume
- 110
- Pages
- 349-363
- ISSN
- 0924-2244 (ISSN-L)
- OpenAlex
- W3132355243
- Cited by
- 216
- References
- 9
- FWCI
- 11.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 4D printing: Recent advances and proposals in the food sector. https://app.cochat.ai/papers/10.1016/j.tifs.2021.01.076
- The paper
- Teng, X., Zhang, M., & Mujumdar, A. S. (2021). 4D printing: Recent advances and proposals in the food sector. Trends in Food Science & Technology. https://doi.org/10.1016/j.tifs.2021.01.076
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.