The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Design Principles of Artificial Solid Electrolyte Interphases for Lithium-Metal Anodes
Open accessAbstract
Lithium metal is a promising anode to provide high energy density for next-generation batteries. However, it has not been implemented due to its low cycling efficiency, which results from the formation of an unstable solid electrolyte interphase (SEI). The SEIs formed with traditional liquid electrolytes are heterogeneous and easy to crack during cycling, thus resulting in the formation of dendritic and dead Li, and further devastating the electrode performance. To solve these issues, efforts have been made to replace natural SEIs with artificial SEIs (ASEIs). Here, we discuss critical design principles of ASEIs based on the understanding of SEI failure mechanisms. Three key principles for a successful ASEI are identified: (1) mechanical stability, which can be either high strength or adaptivity, (2) spatially uniform Li+ transport with moderate conductivity and even single-ion conduction, and (3) chemical passivation to mitigate Li-electrolyte parasitic reactions. Selected examples of recently developed ASEIs are categorized and elaborated. Finally, future directions are given for ASEI designs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
Atomic structure of sensitive battery materials and interfaces revealed by cryo–electron microscopy
Li, Y., Li, Y., Pei, A., Yan, K., Sun, Y., Wu, C.-L., Joubert, L.-M., Chin, R., Koh, A. L., Yu, Y., et al. (2017) · Science · doi:10.1126/science.aam6014 · Cited by 1,547
Self-citationAdvanced Model for Solid Electrolyte Interphase Electrodes in Liquid and Polymer Electrolytes
Peled, E., Golodnitsky, D., & Ardel, G. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837858 · Cited by 1,205
High-Efficiency Lithium-Metal Anode Enabled by Liquefied Gas Electrolytes
Yang, Y., Davies, D. M., Yin, Y., Borodin, O., Lee, J. Z., Fang, C., Olguin, M., Zhang, Y., Sablina, E. S., Wang, X., et al. (2019) · Joule · doi:10.1016/j.joule.2019.06.008 · Cited by 268
Cited by
A robust all-organic protective layer towards ultrahigh-rate and large-capacity Li metal anodes
Li, S., Huang, J., Cui, Y., Liu, S., Chen, Z., Huang, W., Li, C., Liu, R., Fu, R., & Wu, D. (2022) · Nature Nanotechnology · doi:10.1038/s41565-022-01107-2 · Cited by 380
Self-citationDegradation and Speciation of Li Salts during XPS Analysis for Battery Research
Yu, W., Yu, Z., Cui, Y., & Bao, Z. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.2c01587 · Cited by 377
Self-citationPolymers in Lithium‐Ion and Lithium Metal Batteries
Li, J., Cai, Y., Wu, H., Yu, Z., Yan, X., Zhang, Q., Gao, T. Z., Liu, K., Jia, X., & Bao, Z. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003239 · Cited by 348
Self-citationGel polymer electrolytes for rechargeable batteries toward wide-temperature applications
Zhou, X., Zhou, Y., Yu, L., Qi, L., Oh, K.-S., Hu, P., Lee, S.-Y., & Chen, C. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00551h · Cited by 333
Gunnarsdóttir, A. B., Amanchukwu, C. V., Menkin, S., & Grey, C. P. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c10258 · Cited by 326
Metadata
- Authors
- Yu, Z., Cui, Y., & Bao, Z.
- Venue
- Cell Reports Physical Science
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 1
- Issue
- 7
- Pages
- 100119
- ISSN
- 2666-3864 (ISSN-L)
- OpenAlex
- W3044486405
- Cited by
- 280
- References
- 8
- FWCI
- 12.57
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design Principles of Artificial Solid Electrolyte Interphases for Lithium-Metal Anodes. https://app.cochat.ai/papers/10.1016/j.xcrp.2020.100119
- The paper
- Yu, Z., Cui, Y., & Bao, Z. (2020). Design Principles of Artificial Solid Electrolyte Interphases for Lithium-Metal Anodes. Cell Reports Physical Science. https://doi.org/10.1016/j.xcrp.2020.100119
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.