The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
CO2 Reduction: From Homogeneous to Heterogeneous Electrocatalysis
Abstract
Conspectus Due to increasing worldwide fossil fuel consumption, carbon dioxide levels have increased in the atmosphere with increasingly important impacts on the environment. Renewable and clean sources of energy have been proposed, including wind and solar, but they are intermittent and require efficient and scalable energy storage technologies. Electrochemical CO 2 reduction reaction (CO 2 RR) provides a valuable approach in this area. It combines solar- or wind-generated electrical production with energy storage in the chemical bonds of carbon-based fuels. It can provide ways to integrate carbon capture, utilization, and storage in energy cycles while maintaining controlled levels of atmospheric CO 2 . Electrochemistry allows for the utilization of an electrical input to drive chemical reactions. Because CO 2 is kinetically inert, highly active catalysts are required to decrease reaction barriers sufficiently so that reaction rates can be achieved that are sufficient for electrochemical CO 2 reduction. Given the reaction barriers associated with multiple electron–proton reduction of CO 2 to CO, formaldehyde (HC(O)H), formic acid, or formate (HC(O)OH, HC(O)O – ), or more highly reduced forms of carbon, there is also a demand for high selectivity in catalysis. Catalysts that have been explored include homogeneous catalysts in solution, catalysts immobilized on surfaces, and heterogeneous catalysts. In homogeneous catalysis, reduction occurs following diffusion of the catalyst to an electrode where multiple proton coupled electron transfer reduction occurs. Useful catalysts in this area are typically transition-metal complexes with organic ligands and electron transfer properties that utilize combinations of metal and ligand redox levels. As a way to limit the amount of catalyst, in device-like configurations, catalysts are added to the surfaces of conductive substrates by surface binding, in polymeric films, or on carbon electrode surfaces with molecular structures and electronic configurations related to catalysts in solution. Immobilized, homogeneous catalysts can suffer from performance losses and even decomposition during long-term CO 2 reduction cycles, but they are amenable to detailed mechanistic investigations. In parallel efforts, heterogeneous nanocatalysts have been explored in detail with the development of facile synthetic procedures that can offer highly active catalytic surface areas. Their high activity and stability have attracted a significant level of investigation, including possible exploitation for large-scale applications. However, translation of catalytic reactivity to the surface creates a new reactivity environment and complicates the elucidation of mechanistic details and identification of the active site in exploring reaction pathways. Here, the results of previous studies based on transition-metal complex catalysts for CO 2 electroreduction are summarized. Early studies showed that transition-metal complexes of Ru, Ir, Rh, and Os, with well-defined structures, are all capable of catalyzing CO 2 reduction to CO or formate. Derivatives of the complexes were surface attached to conducting electrodes by chemical bonding, noncovalent bonding, or polymerization. The concept of surface binding has also been extended to the preparation of surface area electrodes by the chemically controlled deposition of nanostructured catalysts such as nano tin, nano copper, and nano carbon, all of which have been shown to have high selectivities and activities toward CO 2 reduction. In our presentation, we end this Account with recent advances and a perspective about the application of electrocatalysis in carbon dioxide reduction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Progress and perspectives of electrochemical CO2 reduction on copper in aqueous electrolyte
Nitopi, S., Bertheussen, E., Scott, S. B., Liu, X., Engstfeld, A. K., Horch, S., Seger, B., Stephens, I. E. L., Chan, K., Hahn, C., et al. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00705 · Cited by 5,223
Electrocatalytic and homogeneous approaches to conversion of CO2to liquid fuels
Benson, E. E., Kubiak, C. P., Sathrum, A. J., & Smieja, J. M. (2009) · Chem. Soc. Rev. · doi:10.1039/b804323j · Cited by 2,059
Electrochemical CO2 Reduction on Metal Electrodes
Hori, Y. (2008) · Modern Aspects of Electrochemistry · doi:10.1007/978-0-387-49489-0_3 · Cited by 1,868
Partially oxidized atomic cobalt layers for carbon dioxide electroreduction to liquid fuel
Gao, S., Lin, Y., Jiao, X., Sun, Y., Luo, Q., Zhang, W., Li, D., Yang, J., & Xie, Y. (2016) · Nature · doi:10.1038/nature16455 · Cited by 1,865
Atomically dispersed Fe 3+ sites catalyze efficient CO 2 electroreduction to CO
Gu, J., Hsu, C.-S., Bai, L., Chen, H. M., & Hu, X. (2019) · Science · doi:10.1126/science.aaw7515 · Cited by 1,610
Recent Advances in Inorganic Heterogeneous Electrocatalysts for Reduction of Carbon Dioxide
Zhu, D. D., Liu, J. L., & Qiao, S. Z. (2016) · Advanced Materials · doi:10.1002/adma.201504766 · Cited by 1,594
Future CO 2 Emissions and Climate Change from Existing Energy Infrastructure
Davis, S. J., Caldeira, K., & Matthews, H. D. (2010) · Science · doi:10.1126/science.1188566 · Cited by 1,399
A Local Proton Source Enhances CO 2 Electroreduction to CO by a Molecular Fe Catalyst
Costentin, C., Drouet, S., Robert, M., & Savéant, J.-M. (2012) · Science · doi:10.1126/science.1224581 · Cited by 1,315
Homogeneously Catalyzed Electroreduction of Carbon Dioxide—Methods, Mechanisms, and Catalysts
Francke, R., Schille, B., & Roemelt, M. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00459 · Cited by 1,165
Nanostructured Tin Catalysts for Selective Electrochemical Reduction of Carbon Dioxide to Formate
Zhang, S., Kang, P., & Meyer, T. J. (2014) · Journal of the American Chemical Society · doi:10.1021/ja4113885 · Cited by 1,151
Self-citation
Cited by
Covalent organic frameworks (COFs) for electrochemical applications
Zhao, X., Pachfule, P., & Thomas, A. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01569e · Cited by 1,193
Single-Atom Catalysts Based on the Metal–Oxide Interaction
Lang, R., Du, X., Huang, Y., Jiang, X., Zhang, Q., Guo, Y., Liu, K., Qiao, B., Wang, A., & Zhang, T. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00797 · Cited by 1,087
Electro-organic synthesis – a 21stcentury technique
Pollok, D., & Waldvogel, S. R. (2020) · Chemical Science · doi:10.1039/d0sc01848a · Cited by 740
Selectivity in Electrochemical CO2 Reduction
Saha, P., Amanullah, S., & Dey, A. (2022) · Accounts of Chemical Research · doi:10.1021/acs.accounts.1c00678 · Cited by 528
Porphyrin-based frameworks for oxygen electrocatalysis and catalytic reduction of carbon dioxide
Liang, Z., Wang, H.-Y., Zheng, H., Zhang, W., & Cao, R. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01482f · Cited by 506
Chang, B., Pang, H., Raziq, F., Wang, S., Huang, K.-W., Ye, J., & Zhang, H. (2023) · Energy & Environmental Science · doi:10.1039/d3ee00964e · Cited by 458
Proton Exchange Membrane Fuel Cells (PEMFCs): Advances and Challenges
Tellez-Cruz, M. M., Escorihuela, J., Solorza-Feria, O., & Compañ, V. (2021) · Polymers · doi:10.3390/polym13183064 · Cited by 414
Recent Advances in MOF‐Derived Single Atom Catalysts for Electrochemical Applications
Song, Z., Zhang, L., Doyle‐Davis, K., Fu, X., Luo, J., & Sun, X. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001561 · Cited by 412
Designing High‐Valence Metal Sites for Electrochemical Water Splitting
Sun, H., Xu, X., Song, Y., Zhou, W., & Shao, Z. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009779 · Cited by 403
Recent Progress in MXene‐Based Materials: Potential High‐Performance Electrocatalysts
Liu, A., Liang, X., Ren, X., Guan, W., Gao, M., Yang, Y., Yang, Q., Gao, L., Li, Y., & Ma, T. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003437 · Cited by 386
Zhang, N., Zhang, X., Tao, L., Jiang, P., Ye, C., Lin, R., Huang, Z., Li, A., Pang, D., Yan, H., et al. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202014718 · Cited by 355
A Supported Pd2Dual‐Atom Site Catalyst for Efficient Electrochemical CO2Reduction
Zhang, N., Zhang, X., Kang, Y., Ye, C., Jin, R., Yan, H., Lin, R., Yang, J., Xu, Q., Wang, Y., et al. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202101559 · Cited by 345
Wang, Y., Waterhouse, G. I. N., Shang, L., & Zhang, T. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003323 · Cited by 342
Electroreduction of CO 2 : Advances in the Continuous Production of Formic Acid and Formate
Fernández-Caso, K., Díaz-Sainz, G., Alvarez-Guerra, M., & Irabien, A. (2023) · ACS Energy Letters · doi:10.1021/acsenergylett.3c00489 · Cited by 329
Yan, T., Chen, X., Kumari, L., Lin, J., Li, M., Fan, Q., Chi, H., Meyer, T. J., Zhang, S., & Ma, X. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00514 · Cited by 328
Self-citationWu, Q.-J., Liang, J., Huang, Y.-B., & Cao, R. (2022) · Accounts of Chemical Research · doi:10.1021/acs.accounts.2c00326 · Cited by 325
Yu, J., Wang, J., Ma, Y., Zhou, J., Wang, Y., Lu, P., Yin, J., Ye, R., Zhu, Z., & Fan, Z. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202102151 · Cited by 309
MOF-Based Electrocatalysts: An Overview from the Perspective of Structural Design
Sun, N., Shah, S. S. A., Lin, Z., Zheng, Y.-Z., Jiao, L., & Jiang, H.-L. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00664 · Cited by 307
Wang, Y., Liu, Y., Liu, W., Wu, J., Li, Q., Feng, Q., Chen, Z., Xiong, X., Wang, D., & Lei, Y. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02833a · Cited by 303
Do, V.-H., & Lee, J.-M. (2022) · ACS Nano · doi:10.1021/acsnano.2c08919 · Cited by 292
Operando characterization techniques for electrocatalysis
Li, J., & Gong, J. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01706j · Cited by 290
Recent advances in single atom catalysts for the electrochemical carbon dioxide reduction reaction
Zhang, J., Cai, W., Hu, F. X., Yang, H., & Liu, B. (2021) · Chemical Science · doi:10.1039/d1sc01375k · Cited by 284
Dislocated Bilayer MOF Enables High‐Selectivity Photocatalytic Reduction of CO2 to CO
Liang, J., Yu, H., Shi, J., Li, B., Wu, L., & Wang, M. (2023) · Advanced Materials · doi:10.1002/adma.202209814 · Cited by 270
High‐Entropy Alloy Aerogels: A New Platform for Carbon Dioxide Reduction
Li, H., Huang, H., Chen, Y., Lai, F., Fu, H., Zhang, L., Zhang, N., Bai, S., & Liu, T. (2023) · Advanced Materials · doi:10.1002/adma.202209242 · Cited by 242
Surface engineering for stable electrocatalysis
Do, V.-H., & Lee, J.-M. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00292f · Cited by 167
Bioinspired and Bioderived Aqueous Electrocatalysis
Barrio, J., Pedersen, A., Favero, S., Luo, H., Wang, M., Sarma, S. C., Feng, J., Ngoc, L. T. T., Kellner, S., Li, A. Y., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00429 · Cited by 80
Metadata
- Authors
- Zhang, S., Fan, Q., Xia, R., & Meyer, T. J.
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-01-08
- Volume
- 53
- Issue
- 1
- Pages
- 255-264
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W2999050709
- Cited by
- 682
- References
- 48
- FWCI
- 17.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.