The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Development of Liver Decellularized Extracellular Matrix Bioink for Three-Dimensional Cell Printing-Based Liver Tissue Engineering
Abstract
The liver is an important organ and plays major roles in the human body. Because of the lack of liver donors after liver failure and drug-induced liver injury, much research has focused on developing liver alternatives and liver in vitro models for transplantation and drug screening. Although numerous studies have been conducted, these systems cannot faithfully mimic the complexity of the liver. Recently, three-dimensional (3D) cell printing technology has emerged as one of a number of innovative technologies that may help to overcome this limitation. However, a great deal of work in developing biomaterials optimized for 3D cell printing-based liver tissue engineering remains. Therefore, in this work, we developed a liver decellularized extracellular matrix (dECM) bioink for 3D cell printing applications and evaluated its characteristics. The liver dECM bioink retained the major ECM components of the liver while cellular components were effectively removed and further exhibited suitable and adjustable properties for 3D cell printing. We further studied printing parameters with the liver dECM bioink to verify the versatility and fidelity of the printing process. Stem cell differentiation and HepG2 cell functions in the liver dECM bioink in comparison to those of commercial collagen bioink were also evaluated, and the liver dECM bioink was found to induce stem cell differentiation and enhance HepG2 cell function. Consequently, the results demonstrate that the proposed liver dECM bioink is a promising bioink candidate for 3D cell printing-based liver tissue engineering.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
An overview of tissue and whole organ decellularization processes
Crapo, P. M., Gilbert, T. W., & Badylak, S. F. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.01.057 · Cited by 3,591
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Bone Marrow as a Potential Source of Hepatic Oval Cells
Petersen, B. E., Bowen, W. C., Patrene, K. D., Mars, W. M., Sullivan, A. K., Murase, N., Boggs, S. S., Greenberger, J. S., & Goff, J. P. (1999) · Science · doi:10.1126/science.284.5417.1168 · Cited by 2,378
Vascularized and functional human liver from an iPSC-derived organ bud transplant
Takebe, T., Sekine, K., Enomura, M., Koike, H., Kimura, M., Ogaeri, T., Zhang, R.-R., Ueno, Y., Zheng, Y.-W., Koike, N., et al. (2013) · Nature · doi:10.1038/nature12271 · Cited by 2,170
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Uygun, B. E., Soto-Gutierrez, A., Yagi, H., Izamis, M.-L., Guzzardi, M. A., Shulman, C., Milwid, J., Kobayashi, N., Tilles, A., Berthiaume, F., et al. (2010) · Nature Medicine · doi:10.1038/nm.2170 · Cited by 1,370
Bell, C. C., Hendriks, D. F. G., Moro, S. M. L., Ellis, E., Walsh, J., Renblom, A., Fredriksson Puigvert, L., Dankers, A. C. A., Jacobs, F., Snoeys, J., et al. (2016) · Scientific Reports · doi:10.1038/srep25187 · Cited by 739
Advanced Bioinks for 3D Printing: A Materials Science Perspective
Chimene, D., Lennox, K. K., Kaunas, R. R., & Gaharwar, A. K. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1638-y · Cited by 679
HEPATOCYTE TRANSPLANTATION AS A BRIDGE TO ORTHOTOPIC LIVER TRANSPLANTATION IN TERMINAL LIVER FAILURE
Strom, S. C., Fisher, R. A., Thompson, M. T., Sanyal, A. J., Cole, P. E., Ham, J. M., & Posner, M. P. (1997) · Transplantation · doi:10.1097/00007890-199702270-00014 · Cited by 518
Elastic modulus measurements of human liver and correlation with pathology
Yeh, W.-C., Li, P.-C., Jeng, Y.-M., Hsu, H.-C., Kuo, P.-L., Li, M.-L., Yang, P.-M., & Lee, P. H. (2002) · Ultrasound in Medicine & Biology · doi:10.1016/s0301-5629(02)00489-1 · Cited by 458
Differentiation of human embryonic stem cells into hepatocytes in 2D and 3D culture systems in vitro
Baharvand, H., Hashemi, S. M., Kazemi Ashtiani, S., & Farrokhi, A. (2006) · The International Journal of Developmental Biology · doi:10.1387/ijdb.052072hb · Cited by 429
Skardal, A., Devarasetty, M., Kang, H.-W., Mead, I., Bishop, C., Shupe, T., Lee, S. J., Jackson, J., Yoo, J., Soker, S., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.07.030 · Cited by 428
Decellularized human liver as a natural 3D-scaffold for liver bioengineering and transplantation
Mazza, G., Rombouts, K., Rennie Hall, A., Urbani, L., Vinh Luong, T., Al-Akkad, W., Longato, L., Brown, D., Maghsoudlou, P., Dhillon, A. P., et al. (2015) · Scientific Reports · doi:10.1038/srep13079 · Cited by 415
Lee, H., & Cho, D.-W. (2016) · Lab on a Chip · doi:10.1039/c6lc00450d · Cited by 363
Self-citationJang, J., Kim, T. G., Kim, B. S., Kim, S.-W., Kwon, S.-M., & Cho, D.-W. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.01.013 · Cited by 344
Self-citationHUMAN FETAL HEPATOCYTE TRANSPLANTATION IN PATIENTS WITH FULMINANT HEPATIC FAILURE
Habibullah, C. M., Syed, I. H., Qamar, A., & Taher-Uz, Z. (1994) · Transplantation · doi:10.1097/00007890-199410270-00016 · Cited by 301
Polyelectrolyte gelatin-chitosan hydrogel optimized for 3D bioprinting in skin tissue engineering
Ng, W. L., Yeong, W. Y., & Naing, M. W. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.2016.01.009 · Cited by 293
3D spheroid culture of hESC/hiPSC-derived hepatocyte-like cells for drug toxicity testing
Takayama, K., Kawabata, K., Nagamoto, Y., Kishimoto, K., Tashiro, K., Sakurai, F., Tachibana, M., Kanda, K., Hayakawa, T., Furue, M. K., et al. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.11.029 · Cited by 289
Development of a 3D cell printed construct considering angiogenesis for liver tissue engineering
Lee, J. W., Choi, Y.-J., Yong, W.-J., Pati, F., Shim, J.-H., Kang, K. S., Kang, I.-H., Park, J., & Cho, D.-W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/015007 · Cited by 254
Self-citationDuarte Campos, D. F., Blaeser, A., Korsten, A., Neuss, S., Jäkel, J., Vogt, M., & Fischer, H. (2015) · Tissue Engineering Part A · doi:10.1089/ten.tea.2014.0231 · Cited by 229
Decellularization for whole organ bioengineering
Arenas-Herrera, J. E., Ko, I. K., Atala, A., & Yoo, J. J. (2013) · Biomedical Materials · doi:10.1088/1748-6041/8/1/014106 · Cited by 221
Bio-ink for on-demand printing of living cells
Ferris, C. J., Gilmore, K. J., Beirne, S., McCallum, D., Wallace, G. G., & in het Panhuis, M. (2013) · Biomater. Sci. · doi:10.1039/c2bm00114d · Cited by 214
Liver development in zebrafish (Danio rerio)
Tao, T., & Peng, J. (2009) · Journal of Genetics and Genomics · doi:10.1016/s1673-8527(08)60121-6 · Cited by 165
3D Printed Tissue Models: Present and Future
Jang, J., Yi, H.-G., & Cho, D.-W. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00129 · Cited by 161
Self-citationSolid freeform fabrication technology applied to tissue engineering with various biomaterials
Seol, Y., Kang, T.-Y., & Cho, D. (2011) · Soft Matter · doi:10.1039/c1sm06863f · Cited by 130
Self-citationThe specificity of interactions between proteins and sulfated polysaccharides
Mulloy, B. (2005) · Anais da Academia Brasileira de Ciências · doi:10.1590/s0001-37652005000400007 · Cited by 128
Martínez-Hernández, A., Delgado, F. M., & Amenta, P. S. (1991) · PubMed · Cited by 124
Dehne, E., Tonevitsky, A., & Marx, U. (2013) · Lab on a Chip · doi:10.1039/c3lc50240f · Cited by 109
Lee, S.-Y., Kim, H., & Choi, D. (2015) · International Journal of Stem Cells · doi:10.15283/ijsc.2015.8.1.36 · Cited by 68
Self-citationTranscription factor HNF and hepatocyte differentiation
Nagaki, M., & Moriwaki, H. (2008) · Hepatology Research · doi:10.1111/j.1872-034x.2008.00367.x · Cited by 61
Beaudry, J.-B., Pierreux, C. E., Hayhurst, G. P., Plumb-Rudewiez, N., Weiss, M. C., Rousseau, G. G., & Lemaigre, F. P. (2006) · Molecular and Cellular Biology · doi:10.1128/mcb.02445-05 · Cited by 56
COLLI, M. D., Massimi, M., Barbetta, A., Rosario, B. L. D., Nardecchia, S., Devirgiliis, L. C., & Dentini, M. (2012) · Biomedical Materials · doi:10.1088/1748-6041/7/5/055005 · Cited by 50
Yu, C., Zhu, W. Z., Sun, B., Mei, D., Gou, M., & Chen, S. (2018) · Applied Physics Reviews · doi:10.1063/1.5050245 · Cited by 48
3D Printing for Liver Tissue Engineering: Current Approaches and Future Challenges
Lewis, P. L., & Shah, R. N. (2016) · Current Transplantation Reports · doi:10.1007/s40472-016-0084-y · Cited by 36
Yan, S., Wei, J., Liu, Y., Zhang, H., Chen, J., & Li, X. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.09.027 · Cited by 34
Krueger, W. H., Tanasijevic, B., Barber, V., Flamier, A., Gu, X., Manautou, J. E., & Rasmussen, T. P. (2013) · PLoS ONE · doi:10.1371/journal.pone.0067296 · Cited by 32
Galactose‐ F unctionalized Gelatin Hydrogels Improve the Functionality of Encapsulated Hepg2 Cells
Gevaert, E., Billiet, T., Declercq, H., Dubruel, P., & Cornelissen, R. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201300320 · Cited by 21
Wu, X., Wang, Y., Wu, Q., Li, Y., Li, L., Tang, J., Shi, Y., Bu, H., Bao, J., & Xie, M. (2015) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-015-0006-6 · Cited by 13
Wang, M. L. Y. (2014) · Journal of Stem Cell Research & Therapy · doi:10.4172/2157-7633.1000179 · Cited by 5
Cited by
Kim, B. S., Kwon, Y. W., Kong, J.-S., Park, G. T., Gao, G., Han, W., Kim, M.-B., Lee, H., Kim, J. H., & Cho, D.-W. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.03.040 · Cited by 502
Self-citationFrom Shape to Function: The Next Step in Bioprinting
Levato, R., Jungst, T., Scheuring, R. G., Blunk, T., Groll, J., & Malda, J. (2020) · Advanced Materials · doi:10.1002/adma.201906423 · Cited by 476
Kim, B. S., Das, S., Jang, J., & Cho, D.-W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00808 · Cited by 465
Self-citationSun, W., Starly, B., Daly, A. C., Burdick, J. A., Groll, J., Skeldon, G., Shu, W., Sakai, Y., Shinohara, M., Nishikawa, M., et al. (2020) · Biofabrication · doi:10.1088/1758-5090/ab5158 · Cited by 426
Self-citationMa, X., Liu, J., Zhu, W., Tang, M., Lawrence, N., Yu, C., Gou, M., & Chen, S. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.06.011 · Cited by 401
Metadata
- Authors
- Lee, H., Han, W., Kim, H., Ha, D.-H., Jang, J., Kim, B. S., & Cho, D.-W.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-03-21
- Volume
- 18
- Issue
- 4
- Pages
- 1229-1237
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2594153159
- Cited by
- 328
- References
- 40
- FWCI
- 12.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.