Aliphatic Polyester Thermoplastic Elastomers Containing Hydrogen-Bonding Ureidopyrimidinone Endgroups
The DOI matches its Crossref record; 72 of the 72 references it cites were found in a registry or an index.
Abstract
Polylactide- block-poly(γ-methyl-ε-caprolactone)- block-polylactide (LML) is a sustainable thermoplastic elastomer (TPE) candidate that exhibits competitive mechanical properties as compared to traditional styrenic TPEs. The relatively low glass transition temperature of the polylactide endblocks, however, results in stress relaxation and low levels of elastic recovery. We report the synthesis and characterization of poly(γ-methyl-ε-caprolactone) (PMCL) and LML end-functionalized with ureidopyrimidinone (UPy) hydrogen-bonding moieties to improve the elastic performance of these polymers. Although UPy-functionalized PMCL shows dynamical mechanical behavior that is distinct from the unfunctionalized homopolymer, it does not exhibit elastomeric behavior at room temperature. The addition of UPy endgroups to LML increases the ultimate tensile strength, elongation at break, and tensile toughness compared to unfunctionalized LML. Stress relaxation studies at a fixed strain show reduced levels of stress relaxation in LML with UPy endgroups. The stress relaxation was further reduced by including semicrystalline poly(( S, S)-lactide) as endblocks with UPy endgroups.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Brunsveld, L., Folmer, B. J. B., Meijer, E. W., & Sijbesma, R. P. (2001) · Chemical Reviews · doi:10.1021/cr990125q · Cited by 3,006
Sustainable polymers from renewable resources
Zhu, Y., Romain, C., & Williams, C. K. (2016) · Nature · doi:10.1038/nature21001 · Cited by 2,762
Influence of Diluent and of Copolymer Composition on the Glass Temperature of a Poly-mer System
Fox, T. (1956) · Medical Entomology and Zoology · Cited by 1,800
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Constitutive modeling of the large strain time-dependent behavior of elastomers
BERGSTROM, J. (1998) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(97)00075-6 · Cited by 1,147
Strong Dimerization of Ureidopyrimidones via Quadruple Hydrogen Bonding
Beijer, F. H., Sijbesma, R. P., Kooijman, H., Spek, A. L., & Meijer, E. W. (1998) · Journal of the American Chemical Society · doi:10.1021/ja974112a · Cited by 815
Folmer, B. J. B., Sijbesma, R. P., Versteegen, R. M., van der Rijt, J. A. J., & Meijer, E. W. (2000) · Advanced Materials · doi:10.1002/1521-4095(200006)12:12<874::aid-adma874>3.0.co;2-c · Cited by 696
A review of crazing and fracture in thermoplastics
Kambour, R. P. (1973) · Journal of Polymer Science: Macromolecular Reviews · doi:10.1002/pol.1973.230070101 · Cited by 695
Aliphatic Polyester Block Polymers: Renewable, Degradable, and Sustainable
Hillmyer, M. A., & Tolman, W. B. (2014) · Accounts of Chemical Research · doi:10.1021/ar500121d · Cited by 635
Self-citationStability and Lifetime of Quadruply Hydrogen Bonded 2-Ureido-4[1 H]-pyrimidinone Dimers
Söntjens, S. H. M., Sijbesma, R. P., van Genderen, M. H. P., & Meijer, E. W. (2000) · Journal of the American Chemical Society · doi:10.1021/ja000435m · Cited by 542
Research works printed but not linked: 3
- Holden G., 2004, Thermoplastic Elastomers
- van Beek D. J. M., 2005, Polym. Mater.: Sci. Eng., 93, 433
- Fox T. G., 1956, Bull. Am. Phys. Soc., 1, 123
Cited by
Dynamic and reconfigurable materials from reversible network interactions
Webber, M. J., & Tibbitt, M. W. (2022) · Nature Reviews Materials · doi:10.1038/s41578-021-00412-x · Cited by 387
Defining the Macromolecules of Tomorrow through Synergistic Sustainable Polymer Research
Haque, F. M., Ishibashi, J. S. A., Lidston, C. A. L., Shao, H., Bates, F. S., Chang, A. B., Coates, G. W., Cramer, C. J., Dauenhauer, P. J., Dichtel, W. R., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00173 · Cited by 285
Self-citationGregory, G. L., Sulley, G. S., Carrodeguas, L. P., Chen, T. T. D., Santmarti, A., Terrill, N. J., Lee, K.-Y., & Williams, C. K. (2020) · Chemical Science · doi:10.1039/d0sc00463d · Cited by 117
Supramolecular polymer materials based on ureidopyrimidinone quadruple hydrogen bonding units
Verjans, J., & Hoogenboom, R. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101689 · Cited by 117
Liffland, S., & Hillmyer, M. A. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c01357 · Cited by 76
Self-citation
Metadata
- Authors
- Watts, A., & Hillmyer, M. A.
- Affiliations
- University of Minnesota (US)
- Corresponding author
- Hillmyer, Marc A.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-06-26
- Volume
- 20
- Issue
- 7
- Pages
- 2598-2609
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2953408673
- Cited by
- 59
- References
- 72
- Citations by year
- 2026: 5 · 2025: 9 · 2024: 7 · 2023: 7 · 2022: 15 · 2021: 11 · 2020: 3 · 2019: 2
- FWCI
- 2.20
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Division of Chemistry (CHE-1413862)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- thermoplastic elastomers, ureidopyrimidinone, hydrogen bonding, polylactic acid, block copolymers, aliphatic polyesters, stress relaxation, elastic recovery, glass transition temperature, tensile properties
- MeSH terms
- Hydrogen Bonding, Polyesters, Pyrimidinones, Elastomers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Aliphatic Polyester Thermoplastic Elastomers Containing Hydrogen-Bonding Ureidopyrimidinone Endgroups. https://app.cochat.ai/papers/10.1021/acs.biomac.9b00411
- The paper
- Watts, A., & Hillmyer, M. A. (2019). Aliphatic Polyester Thermoplastic Elastomers Containing Hydrogen-Bonding Ureidopyrimidinone Endgroups. Biomacromolecules. https://doi.org/10.1021/acs.biomac.9b00411
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.