The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Impact of Processing Temperature and Composition on the Formation of Methylammonium Lead Iodide Perovskites
Open accessAbstract
A delicate control of the stoichiometry, crystallographic phase, and grain structure of the photoactive material is typically required to fabricate high-performance photovoltaic (PV) devices. Organo-metal halide perovskite materials, however, exhibit a large degree of tolerance in synthesis and can be fabricated into high efficiency devices by a variety of different vacuum and solution-based processes, with a wide range of precursor ratios. This suggests that the phase field for the desired material is wider than expected or that high device efficiency may be achieved with a range of phases. Here, we investigate the structural and optical properties of the materials formed when a range of compositions of methylammonium iodide (MAI) and lead iodide (PbI2) were reacted at temperatures from 40 to 190 °C. The reactions were performed according to a commonly employed synthetic approach for high efficiency PV devices, and the data was analyzed to construct a pseudobinary, temperature-dependent, phase-composition processing diagram. Escape of MAI vapor at the highest temperatures (150–190 °C) enabled a PbI2 phase to persist to very high MAI concentrations, and the processing diagram was not representative of phase equilibrium in this range. Data from reactions performed with a fixed vapor pressure of MAI allowed the high temperature portion of the diagram to be corrected and a near-equilibrium phase diagram to be proposed. The perovskite phase field is wider than previously thought under both processing conditions and extended by the existence of stacked perovskite sheet phases. Several aspects of the diagrams clarify why the organo-halide perovskite materials are compatible with solution processing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
High-efficiency solution-processed perovskite solar cells with millimeter-scale grains
Nie, W., Tsai, H., Asadpour, R., Blancon, J.-C., Neukirch, A. J., Gupta, G., Crochet, J. J., Chhowalla, M., Tretiak, S., Alam, M. A., et al. (2015) · Science · doi:10.1126/science.aaa0472 · Cited by 3,295
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber
Yin, W.-J., Shi, T., & Yan, Y. (2014) · Applied Physics Letters · doi:10.1063/1.4864778 · Cited by 2,707
Baikie, T., Fang, Y., Kadro, J. M., Schreyer, M., Wei, F., Mhaisalkar, S. G., Graetzel, M., & White, T. J. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10518k · Cited by 2,534
Atomistic Origins of High-Performance in Hybrid Halide Perovskite Solar Cells
Frost, J. M., Butler, K. T., Brivio, F., Hendon, C. H., van Schilfgaarde, M., & Walsh, A. (2014) · Nano Letters · doi:10.1021/nl500390f · Cited by 2,425
Unique Properties of Halide Perovskites as Possible Origins of the Superior Solar Cell Performance
Yin, W., Shi, T., & Yan, Y. (2014) · Advanced Materials · doi:10.1002/adma.201306281 · Cited by 2,334
Planar Heterojunction Perovskite Solar Cells via Vapor-Assisted Solution Process
Chen, Q., Zhou, H., Hong, Z., Luo, S., Duan, H.-S., Wang, H.-H., Liu, Y., Li, G., & Yang, Y. (2014) · Journal of the American Chemical Society · doi:10.1021/ja411509g · Cited by 2,306
Eperon, G. E., Burlakov, V. M., Docampo, P., Goriely, A., & Snaith, H. J. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302090 · Cited by 1,982
Dynamic disorder in methylammoniumtrihalogenoplumbates (II) observed by millimeter-wave spectroscopy
Poglitsch, A., & Weber, D. (1987) · The Journal of Chemical Physics · doi:10.1063/1.453467 · Cited by 1,625
Xiao, Z., Bi, C., Shao, Y., Dong, Q., Wang, Q., Yuan, Y., Wang, C., Gao, Y., & Huang, J. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01138d · Cited by 1,234
Dualeh, A., Tétreault, N., Moehl, T., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201304022 · Cited by 967
Colella, S., Mosconi, E., Fedeli, P., Listorti, A., Gazza, F., Orlandi, F., Ferro, P., Besagni, T., Rizzo, A., Calestani, G., et al. (2013) · Chemistry of Materials · doi:10.1021/cm402919x · Cited by 796
Depleted hole conductor-free lead halide iodide heterojunction solar cells
Laban, W. A., & Etgar, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee42282h · Cited by 759
Thermal Behavior of Methylammonium Lead-Trihalide Perovskite Photovoltaic Light Harvesters
Dualeh, A., Gao, P., Seok, S. I., Nazeeruddin, M. K., & Grätzel, M. (2014) · Chemistry of Materials · doi:10.1021/cm502468k · Cited by 574
Synthesis, Crystal Structure, and Optical and Thermal Properties of (C4H9NH3)2MI4 (M = Ge, Sn, Pb)
Mitzi, D. B. (1996) · Chemistry of Materials · doi:10.1021/cm9505097 · Cited by 561
Stabilization of Ternary Compounds via Ordered Arrays of Defect Pairs
Zhang, S. B., Wei, S.-H., & Zunger, A. (1997) · Physical Review Letters · doi:10.1103/physrevlett.78.4059 · Cited by 344
Solution-processed inorganic semiconductors
Mitzi, D. B. (2004) · Journal of Materials Chemistry · doi:10.1039/b403482a · Cited by 341
A review of polytypism in lead iodide
Beckmann, P. A. (2010) · Crystal Research and Technology · doi:10.1002/crat.201000066 · Cited by 119
Cited by
Organic–Inorganic Perovskites: Structural Versatility for Functional Materials Design
Saparov, B., & Mitzi, D. B. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00715 · Cited by 2,907
Organometal halide perovskite solar cells: degradation and stability
Berhe, T. A., Su, W.-N., Chen, C.-H., Pan, C.-J., Cheng, J.-H., Chen, H.-M., Tsai, M.-C., Chen, L.-Y., Dubale, A. A., & Hwang, B.-J. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02733k · Cited by 1,779
Efficient perovskite light-emitting diodes featuring nanometre-sized crystallites
Xiao, Z., Kerner, R. A., Zhao, L., Tran, N. L., Lee, K. M., Koh, T.-W., Scholes, G. D., & Rand, B. P. (2017) · Nature Photonics · doi:10.1038/nphoton.2016.269 · Cited by 1,374
Wang, F., Geng, W., Zhou, Y., Fang, H., Tong, C., Loi, M. A., Liu, L., & Zhao, N. (2016) · Advanced Materials · doi:10.1002/adma.201603062 · Cited by 624
Origins and influences of metallic lead in perovskite solar cells
Liang, J., Hu, X., Wang, C., Liang, C., Chen, C., Xiao, M., Li, J., Tao, C., Xing, G., Yu, R., et al. (2022) · Joule · doi:10.1016/j.joule.2022.03.005 · Cited by 576
Metadata
- Authors
- Song, Z., Watthage, S. C., Phillips, A. B., Tompkins, B. L., Ellingson, R. J., & Heben, M. J.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-06-03
- Volume
- 27
- Issue
- 13
- Pages
- 4612-4619
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2507995640
- Cited by
- 258
- References
- 28
- FWCI
- 17.96
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.