The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Improved Cycle Life and Stability of Lithium Metal Anodes through Ultrathin Atomic Layer Deposition Surface Treatments
Abstract
Improving the cycle life and failure resistance of lithium metal anodes is critical for next-generation rechargeable batteries. Here, we show that treating Li metal foil electrodes with ultrathin (∼2 nm) Al 2 O 3 layers using atomic layer deposition (ALD) without air exposure can prevent dendrite formation upon cycling at a current density of 1 mA/cm 2 . This has the effect of doubling the lifetime of the anode before failure both under galvanostatic deep discharge conditions and cyclic plating/stripping of symmetric Li–Li cells. The ALD treated electrodes can be cycled for 1259 cycles before failure occurs, which is attributed to improved electrode morphology resulting from homogeneous Li ion flux across the electrode/electrolyte interface.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanostructured materials for advanced energy conversion and storage devices
Aricò, A. S., Bruce, P., Scrosati, B., Tarascon, J.-M., & van Schalkwijk, W. (2005) · Nature Materials · doi:10.1038/nmat1368 · Cited by 8,826
Atomic Layer Deposition: An Overview
George, S. M. (2010) · Chemical Reviews · doi:10.1021/cr900056b · Cited by 5,814
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Peled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Aurbach, D. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00431-6 · Cited by 2,130
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
Aurbach, D. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00080-2 · Cited by 1,697
Stable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
Low-Temperature Al2O3 Atomic Layer Deposition
Groner, M. D., Fabreguette, F. H., Elam, J. W., & George, S. M. (2004) · Chemistry of Materials · doi:10.1021/cm0304546 · Cited by 1,403
Carbon Coated Fe3O4 Nanospindles as a Superior Anode Material for Lithium‐Ion Batteries
Zhang, W., Wu, X., Hu, J., Guo, Y., & Wan, L. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200801386 · Cited by 1,209
Next-Generation Lithium Metal Anode Engineering via Atomic Layer Deposition
Kozen, A. C., Lin, C.-F., Pearse, A. J., Schroeder, M. A., Han, X., Hu, L., Lee, S.-B., Rubloff, G. W., & Noked, M. (2015) · ACS Nano · doi:10.1021/acsnano.5b02166 · Cited by 816
Electrochemical in situ investigations of SEI and dendrite formation on the lithium metal anode
Bieker, G., Winter, M., & Bieker, P. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05865h · Cited by 777
Yan, K., Lee, H.-W., Gao, T., Zheng, G., Yao, H., Wang, H., Lu, Z., Zhou, Y., Liang, Z., Liu, Z., et al. (2014) · Nano Letters · doi:10.1021/nl503125u · Cited by 742
EIS study on the formation of solid electrolyte interface in Li-ion battery
Zhang, S. S., Xu, K., & Jow, T. R. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2005.02.137 · Cited by 696
Dendrite short-circuit and fuse effect on Li/polymer/Li cells
Rosso, M., Brissot, C., Teyssot, A., Dollé, M., Sannier, L., Tarascon, J.-M., Bouchet, R., & Lascaud, S. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2006.02.004 · Cited by 589
Emerging Applications of Atomic Layer Deposition for Lithium‐Ion Battery Studies
Meng, X., Yang, X., & Sun, X. (2012) · Advanced Materials · doi:10.1002/adma.201200397 · Cited by 573
Jung, Y. S., Cavanagh, A. S., Riley, L. A., Kang, S., Dillon, A. C., Groner, M. D., George, S. M., & Lee, S. (2010) · Advanced Materials · doi:10.1002/adma.200903951 · Cited by 560
Quantifying the promise of lithium–air batteries for electric vehicles
Gallagher, K. G., Goebel, S., Greszler, T., Mathias, M., Oelerich, W., Eroglu, D., & Srinivasan, V. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43870h · Cited by 460
Ryou, M., Lee, Y. M., Lee, Y., Winter, M., & Bieker, P. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402953 · Cited by 412
Ultrathin Coatings on Nano-LiCoO2for Li-Ion Vehicular Applications
Scott, I. D., Jung, Y. S., Cavanagh, A. S., Yan, Y., Dillon, A. C., George, S. M., & Lee, S.-H. (2011) · Nano Letters · doi:10.1021/nl1030198 · Cited by 379
Jung, Y. S., Cavanagh, A. S., Dillon, A. C., Groner, M. D., George, S. M., & Lee, S.-H. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3258274 · Cited by 361
A Highly Reversible Lithium Metal Anode
Park, M. S., Ma, S. B., Lee, D. J., Im, D., Doo, S.-G., & Yamamoto, O. (2014) · Scientific Reports · doi:10.1038/srep03815 · Cited by 339
Mehdi, B. L., Qian, J., Nasybulin, E., Park, C., Welch, D. A., Faller, R., Mehta, H., Henderson, W. A., Xu, W., Wang, C. M., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00175 · Cited by 325
Guan, D., Jeevarajan, J. A., & Wang, Y. (2011) · Nanoscale · doi:10.1039/c0nr00939c · Cited by 180
Liu, J., & Sun, X. (2015) · Nanotechnology · doi:10.1088/0957-4484/26/2/024001 · Cited by 158
Cited by
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Nanoscale Nucleation and Growth of Electrodeposited Lithium Metal
Pei, A., Zheng, G., Shi, F., Li, Y., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04755 · Cited by 1,726
Electrolyte additive enabled fast charging and stable cycling lithium metal batteries
Zheng, J., Engelhard, M. H., Mei, D., Jiao, S., Polzin, B. J., Zhang, J.-G., & Xu, W. (2017) · Nature Energy · doi:10.1038/nenergy.2017.12 · Cited by 1,343
Reviving Lithium‐Metal Anodes for Next‐Generation High‐Energy Batteries
Guo, Y., Li, H., & Zhai, T. (2017) · Advanced Materials · doi:10.1002/adma.201700007 · Cited by 1,215
Dead lithium: mass transport effects on voltage, capacity, and failure of lithium metal anodes
Chen, K.-H., Wood, K. N., Kazyak, E., LePage, W. S., Davis, A. L., Sanchez, A. J., & Dasgupta, N. P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00371d · Cited by 1,007
Self-citation
Metadata
- Authors
- Kazyak, E., Wood, K. N., & Dasgupta, N. P.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-09-11
- Volume
- 27
- Issue
- 18
- Pages
- 6457-6462
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2512827926
- Cited by
- 356
- References
- 26
- FWCI
- 16.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.