The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Role of Polyacrylic Acid (PAA) Binder on the Solid Electrolyte Interphase in Silicon Anodes
Open accessAbstract
To obtain high-energy density Li-ion batteries for the next-generation storage devices, silicon anodes provide a viable option because of their high theoretical capacity, low operating potential versus lithium (Li), and environmental abundance. However, the silicon electrode suffers from large volume expansion (∼300%) that leads to mechanical failure, cracks in the SEI (solid electrolyte interphase), and loss of contact with the current collector, all of which severely impede the capacity retention. In this respect, the choice of binders, carbon, electrolyte, and the morphology of the silicon itself plays a critical role in improving capacity retention. Of specific mention is the role of binders where a carboxylic acid-heavy group, PAA (polyacrylic acid), has been demonstrated to have better cycling capacity retention as compared to CMC (carboxy methyl cellulose). Traditionally, the role of binders has been proposed as a soft matrix backbone that allows volume expansion of the anode while preserving its morphology. However, the effect of the binder on both the rate of formation of SEI species across cycles and its distribution around the silicon nanoparticles has not been completely investigated. Herein, we use two different binders (PAA and CMC) coupled with LiFSI (lithium bis(fluorosulfonyl)imide)/EMI-FSI (1-ethyl-3-methylimidazolium bis(fluorosulfonyl)imide) ionic liquid as the electrolyte to understand the effect of binder on the SEI. Using STEM-EDX (scanning transmission electron microscopy–energy-dispersive X-ray spectroscopy), EELS (electron energy loss spectroscopy), and XPS (X-ray photoelectron spectroscopy), we discuss the evolution of the SEI on the Si electrode for both binders. Our results indicate that a faster decomposition of FSI – with a PAA binder leads to LiF (lithium fluoride) formation, making F – unavailable for subsequent SEI formation cycles. This allows further decomposition of the LiFSI salt to sulfates and sulfides which form a crucial component of the SEI around silicon nanoparticles after 100 cycles in the PAA binder-based system. The dual effects of faster consumption of F – to form LiF together with the distribution of passivating sulfides in the SEI could allow for better capacity retention in the PAA binder system as compared to that with CMC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-ion battery materials: present and future
Nitta, N., Wu, F., Lee, J. T., & Yushin, G. (2015) · Materials Today · doi:10.1016/j.mattod.2014.10.040 · Cited by 7,389
A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries
Verma, P., Maire, P., & Novák, P. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.05.072 · Cited by 2,903
Greenhouse-gas emission targets for limiting global warming to 2 °C
Meinshausen, M., Meinshausen, N., Hare, W., Raper, S. C. B., Frieler, K., Knutti, R., Frame, D. J., & Allen, M. R. (2009) · Nature · doi:10.1038/nature08017 · Cited by 2,775
Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells
Kasavajjula, U., Wang, C., & Appleby, A. J. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.09.084 · Cited by 2,491
Size-Dependent Fracture of Silicon Nanoparticles During Lithiation
Liu, X. H., Zhong, L., Huang, S., Mao, S. X., Zhu, T., & Huang, J. Y. (2012) · ACS Nano · doi:10.1021/nn204476h · Cited by 2,376
A review of the electrochemical performance of alloy anodes for lithium-ion batteries
Zhang, W.-J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.07.020 · Cited by 2,140
Review on recent progress of nanostructured anode materials for Li-ion batteries
Goriparti, S., Miele, E., De Angelis, F., Di Fabrizio, E., Proietti Zaccaria, R., & Capiglia, C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.103 · Cited by 2,092
Relative contributions of greenhouse gas emissions to global warming
Lashof, D. A., & Ahuja, D. R. (1990) · Nature · doi:10.1038/344529a0 · Cited by 1,591
Choi, S., Kwon, T.-W., Coskun, A., & Choi, J. W. (2017) · Science · doi:10.1126/science.aal4373 · Cited by 1,338
Size Dependent Fracture of Silicon Nanoparticles during Lithiation.
Huang, J., Liu, X., Zhong, L. S., Huang, S., Mao, S. X., & Zhu, T. (2011) · Nano Letters · Cited by 1,316
Wang, C., Wu, H., Chen, Z., McDowell, M. T., Cui, Y., & Bao, Z. (2013) · Nature Chemistry · doi:10.1038/nchem.1802 · Cited by 1,269
Toward Efficient Binders for Li-Ion Battery Si-Based Anodes: Polyacrylic Acid
Magasinski, A., Zdyrko, B., Kovalenko, I., Hertzberg, B., Burtovyy, R., Huebner, C. F., Fuller, T. F., Luzinov, I., & Yushin, G. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100871y · Cited by 1,101
Zhu, Y., He, X., & Mo, Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta08574h · Cited by 1,045
Xu, C., Lindgren, F., Philippe, B., Gorgoi, M., Björefors, F., Edström, K., & Gustafsson, T. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00339 · Cited by 690
Polymers with Tailored Electronic Structure for High Capacity Lithium Battery Electrodes
Liu, G., Xun, S., Vukmirovic, N., Song, X., Olalde‐Velasco, P., Zheng, H., Battaglia, V. S., Wang, L., & Yang, W. (2011) · Advanced Materials · doi:10.1002/adma.201102421 · Cited by 576
Dong, J., Ozaki, Y., & Nakashima, K. (1997) · Macromolecules · doi:10.1021/ma960693x · Cited by 544
Schroder, K., Alvarado, J., Yersak, T. A., Li, J., Dudney, N., Webb, L. J., Meng, Y. S., & Stevenson, K. J. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01627 · Cited by 454
Self-citationToward an Ideal Polymer Binder Design for High-Capacity Battery Anodes
Wu, M., Xiao, X., Vukmirovic, N., Xun, S., Das, P. K., Song, X., Olalde-Velasco, P., Wang, D., Weber, A. Z., Wang, L.-W., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja4054465 · Cited by 398
Li, J.-Y., Xu, Q., Li, G., Yin, Y.-X., Wan, L.-J., & Guo, Y.-G. (2017) · Materials Chemistry Frontiers · doi:10.1039/c6qm00302h · Cited by 384
Nakai, H., Kubota, T., Kita, A., & Kawashima, A. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3589300 · Cited by 360
Philippe, B., Dedryvère, R., Gorgoi, M., Rensmo, H., Gonbeau, D., & Edström, K. (2013) · Journal of the American Chemical Society · doi:10.1021/ja403082s · Cited by 343
Kim, H., Wu, F., Lee, J. T., Nitta, N., Lin, H., Oschatz, M., Cho, W. I., Kaskel, S., Borodin, O., & Yushin, G. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401792 · Cited by 240
Eshetu, G. G., Diemant, T., Grugeon, S., Behm, R. J., Laruelle, S., Armand, M., & Passerini, S. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04406 · Cited by 235
Li, W., Sun, B., & Wu, P. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.05.002 · Cited by 165
Said, H. M., Alla, S. G. A., & El‐Naggar, A. W. M. (2004) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2004.07.002 · Cited by 142
Sohn, M., Lee, D. G., Park, H., Park, C., Choi, J., & Kim, H. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800855 · Cited by 141
Ewels, P., Sikora, T., Serin, V., et al. (2016) · Microscopy and Microanalysis · doi:10.1017/s1431927616000179 · Cited by 127
Takada, K., Yamada, Y., Watanabe, E., Wang, J., Sodeyama, K., Tateyama, Y., Hirata, K., Kawase, T., & Yamada, A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b08414 · Cited by 122
Hu, B., Shkrob, I. A., Zhang, S., Zhang, L., Zhang, J., Li, Y., Liao, C., Zhang, Z., Lu, W., & Zhang, L. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.068 · Cited by 108
Elucidating electrolyte decomposition under electron-rich environments at the lithium-metal anode
Camacho-Forero, L. E., & Balbuena, P. B. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp06485c · Cited by 99
Sina, M., Alvarado, J., Shobukawa, H., Alexander, C. T., Manichev, V., Feldman, L. C., Gustafsson, T., Stevenson, K. J., & Meng, Y. S. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201600438 · Cited by 75
Self-citationLin, H., Tao, J., Kan, H., Qian, Z. M., Chen, A., Du, Y., Liu, T., Zhang, Y., Qi, Y., Ye, J., et al. (2018) · Journal of Exposure Science & Environmental Epidemiology · doi:10.1038/s41370-018-0034-0 · Cited by 70
Haruta, M., Kijima, Y., Hioki, R., Doi, T., & Inaba, M. (2018) · Nanoscale · doi:10.1039/c8nr05354e · Cited by 45
Cited by
Conformal quantum dot–SnO 2 layers as electron transporters for efficient perovskite solar cells
Kim, M., Jeong, J., Lu, H., Lee, T. K., Eickemeyer, F. T., Liu, Y., Choi, I. W., Choi, S. J., Jo, Y., Kim, H.-B., et al. (2022) · Science · doi:10.1126/science.abh1885 · Cited by 1,346
Advances of polymer binders for silicon‐based anodes in high energy density lithium‐ion batteries
Zhao, Y., Yue, F., Li, S., Zhang, Y., Tian, Z., Xu, Q., Xin, S., & Guo, Y. (2021) · InfoMat · doi:10.1002/inf2.12185 · Cited by 318
Zhang, C., Wang, F., Han, J., Bai, S., Tan, J., Liu, J., & Li, F. (2021) · Small Structures · doi:10.1002/sstr.202100009 · Cited by 300
Constructing Pure Si Anodes for Advanced Lithium Batteries
Je, M., Han, D.-Y., Ryu, J., & Park, S. (2023) · Accounts of Chemical Research · doi:10.1021/acs.accounts.3c00308 · Cited by 175
Metadata
- Authors
- Parikh, P., Sina, M., Banerjee, A., Wang, X., D’Souza, M. S., Doux, J.-M., Wu, E. A., Trieu, O. Y., Gong, Y., Zhou, Q., Snyder, K., & Meng, Y. S.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-03-19
- Volume
- 31
- Issue
- 7
- Pages
- 2535-2544
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2924740925
- Cited by
- 265
- References
- 33
- FWCI
- 6.87
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.