The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Stabilizing Effect of a Hybrid Surface Coating on a Ni-Rich NCM Cathode Material in All-Solid-State Batteries
Open accessAbstract
Bulk-type all-solid-state batteries (SSBs) are receiving much attention as next-generation energy storage technology with potentially improved safety and higher power and energy densities (over a wider operating temperature range) compared to conventional Li-ion batteries (LIBs). However, practical implementation of SSBs faces a number of hurdles, such as issues related to interfacial stability between the solid electrolyte (SE) and other active and inactive electrode constituents. One approach to effectively prevent or mitigate side reactions at the positive electrode is through surface coating of the cathode material with a dielectric material. In this article, we report on the preparation of Li 2 CO 3 - and Li 2 CO 3 /LiNbO 3 -coated NCM622 (60% Ni) for application in pelletized SSB cells using β-Li 3 PS 4 as the SE. Specifically, we demonstrate that in contrast to state-of-the-art LIBs, the presence of surface carbonate contaminants helps improve the cell cyclability, and the combination of carbonate and niobate species in a kind of hybrid or solid-solution coating is particularly beneficial for achieving stable performance of Ni-rich NCM composite cathodes of practical loading (91% capacity retention after 100 cycles at a C/10 rate and 25 °C). This is in part because of the formation of robust interfaces in the cathode layer, strongly suppressing CO 2 evolution (because of decomposition of the relevant carbonate species) and the accompanied SO 2 formation and release during cycling operation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Towards greener and more sustainable batteries for electrical energy storage
Larcher, D., & Tarascon, J.-M. (2015) · Nature Chemistry · doi:10.1038/nchem.2085 · Cited by 7,872
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
Self-citationHigh-power all-solid-state batteries using sulfide superionic conductors
Kato, Y., Hori, S., Saito, T., Suzuki, K., Hirayama, M., Mitsui, A., Yonemura, M., Iba, H., & Kanno, R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.30 · Cited by 3,517
Tanuma, S., Powell, C. J., & Penn, D. R. (1994) · Surface and Interface Analysis · doi:10.1002/sia.740210302 · Cited by 2,753
Thackeray, M. M., Wolverton, C., & Isaacs, E. D. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21892e · Cited by 2,515
Koerver, R., Aygün, I., Leichtweiß, T., Dietrich, C., Zhang, W., Binder, J. O., Hartmann, P., Zeier, W. G., & Janek, J. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00931 · Cited by 1,020
Self-citationBusca, G., & Lorenzelli, V. (1982) · Materials Chemistry · doi:10.1016/0390-6035(82)90059-1 · Cited by 942
Ohta, N., Takada, K., Zhang, L., Ma, R., Osada, M., & Sasaki, T. (2006) · Advanced Materials · doi:10.1002/adma.200502604 · Cited by 899
Wenzel, S., Randau, S., Leichtweiß, T., Weber, D. A., Sann, J., Zeier, W. G., & Janek, J. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00610 · Cited by 854
Self-citationAuvergniot, J., Cassel, A., Ledeuil, J.-B., Viallet, V., Seznec, V., & Dedryvère, R. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b04990 · Cited by 644
Haruyama, J., Sodeyama, K., Han, L., Takada, K., & Tateyama, Y. (2014) · Chemistry of Materials · doi:10.1021/cm5016959 · Cited by 605
Renfrew, S. E., & McCloskey, B. D. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b08461 · Cited by 409
Interfacial modification for high-power solid-state lithium batteries
Takada, K., Ohta, N., Zhang, L., Fukuda, K., Sakaguchi, I., Ma, R., Osada, M., & Sasaki, T. (2008) · Solid State Ionics · doi:10.1016/j.ssi.2008.02.017 · Cited by 376
de Biasi, L., Kondrakov, A. O., Geßwein, H., Brezesinski, T., Hartmann, P., & Janek, J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b06363 · Cited by 374
Self-citationRedox activity of argyrodite Li6PS5Cl electrolyte in all-solid-state Li-ion battery: An XPS study
Auvergniot, J., Cassel, A., Foix, D., Viallet, V., Seznec, V., & Dedryvère, R. (2017) · Solid State Ionics · doi:10.1016/j.ssi.2016.11.029 · Cited by 367
Kim, D. H., Oh, D. Y., Park, K. H., Choi, Y. E., Nam, Y. J., Lee, H. A., Lee, S.-M., & Jung, Y. S. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00330 · Cited by 359
Zhang, W., Schröder, D., Arlt, T., Manke, I., Koerver, R., Pinedo, R., Weber, D. A., Sann, J., Zeier, W. G., & Janek, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02730c · Cited by 348
Self-citationCulver, S. P., Koerver, R., Zeier, W. G., & Janek, J. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900626 · Cited by 342
Self-citationImpact of Cathode Material Particle Size on the Capacity of Bulk-Type All-Solid-State Batteries
Strauss, F., Bartsch, T., de Biasi, L., Kim, A.-Y., Janek, J., Hartmann, P., & Brezesinski, T. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00275 · Cited by 334
Self-citationElectrochemical Oxidation of Lithium Carbonate Generates Singlet Oxygen
Mahne, N., Renfrew, S. E., McCloskey, B. D., & Freunberger, S. A. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201802277 · Cited by 314
Redox-active cathode interphases in solid-state batteries
Koerver, R., Walther, F., Aygün, I., Sann, J., Dietrich, C., Zeier, W. G., & Janek, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta07641j · Cited by 287
Self-citationOrigin of Carbon Dioxide Evolved during Cycling of Nickel-Rich Layered NCM Cathodes
Hatsukade, T., Schiele, A., Hartmann, P., Brezesinski, T., & Janek, J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b13158 · Cited by 256
Self-citationARXPS characterisation of plasma polymerised surface chemical gradients
Parry, K. L., Shard, A. G., Short, R. D., White, R. G., Whittle, J. D., & Wright, A. (2006) · Surface and Interface Analysis · doi:10.1002/sia.2400 · Cited by 238
Li3BO3–Li2CO3: Rationally Designed Buffering Phase for Sulfide All-Solid-State Li-Ion Batteries
Jung, S. H., Oh, K., Nam, Y. J., Oh, D. Y., Brüner, P., Kang, K., & Jung, Y. S. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b03321 · Cited by 233
Jung, R., Strobl, P., Maglia, F., Stinner, C., & Gasteiger, H. A. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1261811jes · Cited by 202
Evolution at the Solid Electrolyte/Gold Electrode Interface during Lithium Deposition and Stripping
Sang, L., Haasch, R. T., Gewirth, A. A., & Nuzzo, R. G. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00034 · Cited by 163
Gas Evolution in All-Solid-State Battery Cells
Bartsch, T., Strauss, F., Hatsukade, T., Schiele, A., Kim, A., Hartmann, P., Janek, J., & Brezesinski, T. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01457 · Cited by 159
Self-citationSeki, S., Kobayashi, Y., Miyashiro, H., et al. (2005) · Chemistry of Materials · doi:10.1021/cm047846c · Cited by 153
Li, L., Xu, M. F., Yao, Q., Chen, Z., Song, L., Zhang, Z., Gao, C., Wang, P., Yu, Z., & Lai, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09197 · Cited by 138
Berkes, B. B., Jozwiuk, A., Vračar, M., Sommer, H., Brezesinski, T., & Janek, J. (2015) · Analytical Chemistry · doi:10.1021/acs.analchem.5b01237 · Cited by 122
Self-citation
Cited by
Kim, K. J., Balaish, M., Wadaguchi, M., Kong, L., & Rupp, J. L. M. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002689 · Cited by 806
Jiang, M., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202103005 · Cited by 720
A new halospinel superionic conductor for high-voltage all solid state lithium batteries
Zhou, L., Kwok, C. Y., Shyamsunder, A., Zhang, Q., Wu, X., & Nazar, L. F. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01017k · Cited by 335
Sulfide and Oxide Inorganic Solid Electrolytes for All-Solid-State Li Batteries: A Review
Reddy, M. V., Julien, C. M., Mauger, A., & Zaghib, K. (2020) · Nanomaterials · doi:10.3390/nano10081606 · Cited by 331
Designing Cathodes and Cathode Active Materials for Solid‐State Batteries
Minnmann, P., Strauss, F., Bielefeld, A., Ruess, R., Adelhelm, P., Burkhardt, S., Dreyer, S. L., Trevisanello, E., Ehrenberg, H., Brezesinski, T., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201425 · Cited by 277
Self-citation
Metadata
- Authors
- Kim, A.-Y., Strauss, F., Bartsch, T., Teo, J. H., Hatsukade, T., Mazilkin, A., Janek, J., Hartmann, P., & Brezesinski, T.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-11-08
- Volume
- 31
- Issue
- 23
- Pages
- 9664-9672
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2987016366
- Cited by
- 266
- References
- 31
- FWCI
- 9.87
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.