Printability and Shape Fidelity of Bioinks in 3D Bioprinting
Open accessThe DOI matches its Crossref record; 285 of the 287 references it cites were found in a registry or an index, and 1 are not checked yet.
Abstract
Three-dimensional bioprinting uses additive manufacturing techniques for the automated fabrication of hierarchically organized living constructs. The building blocks are often hydrogel-based bioinks, which need to be printed into structures with high shape fidelity to the intended computer-aided design. For optimal cell performance, relatively soft and printable inks are preferred, although these undergo significant deformation during the printing process, which may impair shape fidelity. While the concept of good or poor printability seems rather intuitive, its quantitative definition lacks consensus and depends on multiple rheological and chemical parameters of the ink. This review discusses qualitative and quantitative methodologies to evaluate printability of bioinks for extrusion- and lithography-based bioprinting. The physicochemical parameters influencing shape fidelity are discussed, together with their importance in establishing new models, predictive tools and printing methods that are deemed instrumental for the design of next-generation bioinks, and for reproducible comparison of their structural performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures














Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [30]
The cited source says what the claim attributes to it.
In the citing paper
“However, the successful fabrication of stable 3D constructs relies on hydrogels with optimized rheological behavior, structural stability, and physicochemical properties that ensure printability and shape fidelity [7,8,9].”
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–286 of 286
Carletto, R. P., Ko, S. K., Caviglia, C., Wolff, A., Emnéus, J., Keller, S. S., & Dufva, M. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.10.047 · Cited by 102
Hydrogel-based reinforcement of 3D bioprinted constructs
Melchels, F. P. W., Blokzijl, M. M., Levato, R., Peiffer, Q. C., Ruijter, M. D., Hennink, W. E., Vermonden, T., & Malda, J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035004 · Cited by 101
Self-citation3D Printed Conductive Nanocellulose Scaffolds for the Differentiation of Human Neuroblastoma Cells
Bordoni, M., Karabulut, E., Kuzmenko, V., Fantini, V., Pansarasa, O., Cereda, C., & Gatenholm, P. (2020) · Cells · doi:10.3390/cells9030682 · Cited by 100
Schipani, R., Scheurer, S., Florentin, R., Critchley, S. E., & Kelly, D. J. (2020) · Biofabrication · doi:10.1088/1758-5090/ab8708 · Cited by 100
Valentin, T. M., Leggett, S. E., Chen, P., Sodhi, J., Stephens, L. H., McClintock, H. D., Sim, J. Y., & Wong, I. Y. (2017) · Lab on a Chip · doi:10.1039/c7lc00694b · Cited by 98
Yin, H. H., Ding, Y., Zhai, Y., Tan, W., & Yin, X. (2018) · Nature Communications · doi:10.1038/s41467-018-06685-1 · Cited by 97
Bio-ink development for three-dimensional bioprinting of hetero-cellular cartilage constructs
Mouser, V. H. M., Levato, R., Mensinga, A., Dhert, W. J. A., Gawlitta, D., & Malda, J. (2020) · Connective Tissue Research · doi:10.1080/03008207.2018.1553960 · Cited by 97
Self-citationContessi Negrini, N., Celikkin, N., Tarsini, P., Farè, S., & Święszkowski, W. (2020) · Biofabrication · doi:10.1088/1758-5090/ab56f9 · Cited by 95
Out‐of‐Plane 3D‐Printed Microfibers Improve the Shear Properties of Hydrogel Composites
de Ruijter, M., Hrynevich, A., Haigh, J. N., Hochleitner, G., Castilho, M. D., Gröll, J., Malda, J., & Dalton, P. D. (2017) · Small · doi:10.1002/smll.201702773 · Cited by 91
Self-citationAntibody loaded collapsible hyaluronic acid hydrogels for intraocular delivery
Egbu, R., Brocchini, S., Khaw, P. T., & Awwad, S. (2017) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2017.12.019 · Cited by 91
Process-induced cell damage: pneumatic versus screw-driven bioprinting
Ning, L., Yang, B., Mohabatpour, F., Betancourt, N., Sarker, M., Papagerakis, P., & Chen, X. (2020) · Biofabrication · doi:10.1088/1758-5090/ab5f53 · Cited by 91
Relevance of the setting reaction to the injectability of tricalcium phosphate pastes
Montúfar, E. B., Maazouz, Y., & Ginebra, M. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.11.028 · Cited by 90
Rheological Behavior of Fugitive Organic Inks for Direct-Write Assembly
Therriault, D., White, S. R., & Lewis, J. A. (2007) · Applied Rheology · doi:10.1515/arh-2007-0001 · Cited by 89
Optical coherence tomography of cell dynamics in three-dimensional tissue models
Tan, W., Oldenburg, A. L., Norman, J. J., Desai, T. A., & Boppart, S. A. (2006) · Optics Express · doi:10.1364/oe.14.007159 · Cited by 89
Pakutsah, K., & Aht‐Ong, D. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.12.172 · Cited by 89
Sarker, M., & Chen, X. B. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4036226 · Cited by 88
Jalili, N. A., Jaiswal, M. K., Peak, C. W., Cross, L. M., & Gaharwar, A. K. (2017) · Nanoscale · doi:10.1039/c7nr02327h · Cited by 88
Bioprinting Neural Systems to Model Central Nervous System Diseases
Qiu, B., Bessler, N., Figler, K. P., Buchholz, M., Rios, A. C., Malda, J., Levato, R., & Caiazzo, M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910250 · Cited by 86
Self-citationPre-set extrusion bioprinting for multiscale heterogeneous tissue structure fabrication
Kang, D., Ahn, G., Kim, D., Kang, H.-W., Yun, S., Yun, W.-S., Shim, J.-H., & Jin, S. (2018) · Biofabrication · doi:10.1088/1758-5090/aac70b · Cited by 85
Sakai, S., Kamei, H., Mori, T., Hotta, T., Ohi, H., Nakahata, M., & Taya, M. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.7b01827 · Cited by 84
ECM Based Bioink for Tissue Mimetic 3D Bioprinting
Nam, S. Y., & Park, S. (2018) · Advances in experimental medicine and biology · doi:10.1007/978-981-13-0445-3_20 · Cited by 83
Datta, P., Vyas, V., Dhara, S., Chowdhury, A. R., & Barui, A. (2019) · Journal of Bionic Engineering · doi:10.1007/s42235-019-0101-9 · Cited by 82
3D Printing of Thermo-Responsive Methylcellulose Hydrogels for Cell-Sheet Engineering
Cochis, A., Bonetti, L., Sorrentino, R., Negrini, N. C., Grassi, F. A., Leigheb, M., Rimondini, L., & Farè, S. (2018) · Materials · doi:10.3390/ma11040579 · Cited by 82
Synchronous 3D Bioprinting of Large‐Scale Cell‐Laden Constructs with Nutrient Networks
Shao, L., Gao, Q., Xie, C., Fu, J., Xiang, M., & He, Y. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901142 · Cited by 81
Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration
Peak, C. W., Singh, K. A., Adlouni, M., Chen, J., & Gaharwar, A. K. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801553 · Cited by 80
A comparison of imaging methodologies for 3D tissue engineering
Smith, L. E., Smallwood, R., & Macneil, S. (2010) · Microscopy Research and Technique · doi:10.1002/jemt.20859 · Cited by 80
The use of bioactive peptides to modify materials for bone tissue repair
Wang, C., Liu, Y., Fan, Y., & Li, X. (2017) · Regenerative Biomaterials · doi:10.1093/rb/rbx011 · Cited by 79
3-D printing of chitosan-calcium phosphate inks: rheology, interactions and characterization
Caballero, S. S. R., Saiz, E., Montembault, A., Tadier, S., Maire, É., David, L., Delair, T., & Grémillard, L. (2018) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-018-6201-y · Cited by 79
Lee, M., Bae, K., Guillon, P., Chang, J., Arlov, Ø., & Zenobi-Wong, M. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b13166 · Cited by 78
Sharifi, S., Blanquer, S., van Kooten, T. G., & Grijpma, D. W. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.09.014 · Cited by 77
Bandyopadhyay, A., & Mandal, B. B. (2020) · Biofabrication · doi:10.1088/1758-5090/ab40fa · Cited by 77
Sortase A as a cross-linking enzyme in tissue engineering
Broguiere, N., Formica, F. A., Barreto, G., & Zenobi-Wong, M. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.07.020 · Cited by 75
Wang, L., Xu, M., Luo, L., Zhou, Y., & Si, P. (2018) · Scientific Reports · doi:10.1038/s41598-018-21274-4 · Cited by 75
Sarker, M. D., Naghieh, S., McInnes, A. D., Ning, L., Schreyer, D. J., & Chen, D. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00045 · Cited by 75
Polysaccharide hydrogels for multiscale 3D printing of pullulan scaffolds
Giustina, G. D., Gandin, A., Brigo, L., Panciera, T., Giulitti, S., Sgarbossa, P., D’Alessandro, D., Trombi, L., Danti, S., & Brusatin, G. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107566 · Cited by 73
Lee, C., O'Connell, C. D., Onofrillo, C., Choong, P. F. M., Di Bella, C., & Duchi, S. (2020) · Stem Cells Translational Medicine · doi:10.1002/sctm.19-0192 · Cited by 71
Shin, S., Kwak, H., & Hyun, J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b05963 · Cited by 69
Characterizing Bioinks for Extrusion Bioprinting: Printability and Rheology
O’Connell, C., Ren, J., Pope, L., Zhang, Y., Mohandas, A., Blanchard, R., Duchi, S., & Onofrillo, C. (2020) · Methods in Molecular Biology · doi:10.1007/978-1-0716-0520-2_7 · Cited by 69
Hybrid Laser Printing of 3D, Multiscale, Multimaterial Hydrogel Structures
Kunwar, P., Xiong, Z., Zhu, Y., Li, H., Filip, A., & Soman, P. (2019) · Advanced Optical Materials · doi:10.1002/adom.201900656 · Cited by 68
Imaging engineered tissues using structural and functional optical coherence tomography
Liang, X., Graf, B. W., & Boppart, S. A. (2009) · Journal of Biophotonics · doi:10.1002/jbio.200910048 · Cited by 67
Potential Health and Environmental Risks of Three-Dimensional Engineered Polymers
Ferraz, M. D. A. M. M., Henning, H. H. W., Costa, P. F., Malda, J., Gac, S. L., Bray, F., van Duursen, M. B. M., Brouwers, J. F. H. M., van de Lest, C. H. A., Bertijn, I., et al. (2018) · Environmental Science & Technology Letters · doi:10.1021/acs.estlett.7b00495 · Cited by 64
Self-citationA biocompatible macromolecular two-photon initiator based on hyaluronan
Tromayer, M., Gruber, P., Marković, M., Rosspeintner, A., Vauthey, E., Redl, H. R., Ovsianikov, A., & Liska, R. (2016) · Polymer Chemistry · doi:10.1039/c6py01787h · Cited by 63
Moses, J. C., Saha, T., & Mandal, B. B. (2020) · Bioprinting · doi:10.1016/j.bprint.2019.e00067 · Cited by 63
Lee, M., Bae, K., Levinson, C., & Zenobi‐Wong, M. (2020) · Biofabrication · doi:10.1088/1758-5090/ab782d · Cited by 62
Macroporous Hydrogel Scaffolds and Their Characterization By Optical Coherence Tomography
Chen, C., Betz, M. W., Fisher, J. P., Paek, A. Y., & Chen, Y. (2010) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2010.0072 · Cited by 62
Cell encapsulation in gelatin bioink impairs 3D bioprinting resolution
Schwartz, R., Malpica, M., Thompson, G. L., & Miri, A. K. (2020) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2019.103524 · Cited by 61
Wang, L., Xu, M., Zhang, L., Zhou, Q., & Luo, L. (2016) · Biomedical Optics Express · doi:10.1364/boe.7.000894 · Cited by 58
Bajaj, P., Marchwiany, D., Duarte, C., & Bashir, R. (2013) · Advanced Healthcare Materials · doi:10.1002/adhm.201200318 · Cited by 57
Influence of Flow Behavior of Alginate–Cell Suspensions on Cell Viability and Proliferation
Ning, L., Guillemot, A., Zhao, J., Kipouros, G., & Chen, X. (2016) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2016.0011 · Cited by 56
Müller, M., Fisch, P., Molnar, M., Eggert, S., Binelli, M. R., Maniura‐Weber, K., & Zenobi‐Wong, M. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.110510 · Cited by 56
Chu, S., Maples, M. M., & Bryant, S. J. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.03.033 · Cited by 56
Sakai, S., Mochizuki, K., Qu, Y., Mail, M., Nakahata, M., & Taya, M. (2018) · Biofabrication · doi:10.1088/1758-5090/aadc9e · Cited by 55
Nowicki, M. A., Zhu, W., Sarkar, K., Rao, R. D., & Zhang, L. G. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00066 · Cited by 53
Zhuo, F., Liu, X., Gao, Q., Wang, Y., Hu, K., & Cai, Q. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.07.029 · Cited by 53
Imaging techniques for the assessment of fracture repair
Augat, P., Morgan, E. F., Lujan, T. J., MacGillivray, T., & Cheung, W. (2014) · Injury · doi:10.1016/j.injury.2014.04.004 · Cited by 52
Cengiz, N., Gevrek, T. N., Sanyal, R., & Sanyal, A. (2017) · Chemical Communications · doi:10.1039/c7cc02298k · Cited by 52
Miller, A. T., Safranski, D. L., Wood, C., Guldberg, R. E., & Gall, K. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.06.038 · Cited by 51
In Situ Cross-Linkable Hydrogels as a Dynamic Matrix for Tissue Regenerative Medicine
Park, K. M., & Park, K. D. (2018) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-018-0155-5 · Cited by 50
Introduction to Polymer Rheology and Processing
Cheremisinoff, N. P. (2018) · CRC Press eBooks · doi:10.1201/9781351073820 · Cited by 50
Gravity and Surface Tension Effects on the Shape Change of Soft Materials
Xu, X., Jagota, A., Peng, S., Luo, D., Wu, M., & Hui, C. (2013) · Langmuir · doi:10.1021/la400921h · Cited by 48
Behrendt, P., Ladner, Y. D., Stoddart, M. J., Lippross, S., Alini, M., Eglin, D., & Armiento, A. R. (2019) · The American Journal of Sports Medicine · doi:10.1177/0363546519887909 · Cited by 48
Self-citationHydroxyapatite-modified gelatin bioinks for bone bioprinting
Wenz, A., Janke, K., Hoch, E., Tovar, G. E. M., Borchers, K., & Kluger, P. J. (2016) · BioNanoMaterials · doi:10.1515/bnm-2015-0018 · Cited by 47
Universal Nanocarrier Ink Platform for Biomaterials Additive Manufacturing
Guzzi, E. A., Bovone, G., & Tibbitt, M. W. (2019) · Small · doi:10.1002/smll.201905421 · Cited by 47
Silk-Reinforced Collagen Hydrogels with Raised Multiscale Stiffness for Mesenchymal Cells 3D Culture
Sanz-Fraile, H., Amoros, S., Mendizabal, I., Galvez-Monton, C., Prat-Vidal, C., Bayes-Genis, A., Navajas, D., Farre, R., & Otero, J. (2020) · Tissue Engineering Part A · doi:10.1089/ten.tea.2019.0199 · Cited by 46
Choi, D. J., Kho, Y., Park, S. J., Kim, Y. J., Chung, S. H., & Kim, C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.05.207 · Cited by 46
Development and Evaluation of Hyaluronic Acid-Based Hybrid Bio-Ink for Tissue Regeneration
Lee, J., Lee, S.-H., Kim, B., Cho, Y., & Park, Y. (2018) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-018-0144-8 · Cited by 45
Rheology of regenerated cellulose suspension and influence of sodium alginate
Jiang, Y., Cruz, J. A. D. L., Ding, L., Wang, B., Feng, X., Mao, Z., Xu, H. Y., & Sui, X. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.01.172 · Cited by 45
Mehta, M., Checa, S., Lienau, J., Hutmacher, D. W., & Duda, G. N. (2012) · European Cells and Materials · doi:10.22203/ecm.v024a26 · Cited by 43
Freeze-FRESH: A 3D Printing Technique to Produce Biomaterial Scaffolds with Hierarchical Porosity
Wang, Z., & Florczyk, S. J. (2020) · Materials · doi:10.3390/ma13020354 · Cited by 43
3D printing of step-gradient nanocomposite hydrogels for controlled cell migration
Motealleh, A., Çelebi‐Saltik, B., Ermiş, N., Nowak, S., Khademhosseini, A., & Kehr, N. S. (2019) · Biofabrication · doi:10.1088/1758-5090/ab3582 · Cited by 36
Formulation and Characterization of a SIS-Based Photocrosslinkable Bioink
Serna, J. A., Florez, S. L., Talero, V. A., Briceño, J. C., Muñoz-Camargo, C., & Cruz, J. C. (2019) · Polymers · doi:10.3390/polym11030569 · Cited by 34
Editorial: Special Issue on 3D Printing of Biomaterials
Miller, J. S., & Burdick, J. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00566 · Cited by 33
Comeau, P., & Willett, T. L. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.110937 · Cited by 33
Bicho, D., Ajami, S., Liu, C., Reis, R. L., & Oliveira, J. M. (2019) · Journal of Materials Chemistry B · doi:10.1039/c8tb03173h · Cited by 28
Zheng, K., Rupnick, M. A., Liu, B., & Brezinski, M. E. (2009) · The Open Tissue Engineering and Regenerative Medicine Journal · doi:10.2174/1875043500902010008 · Cited by 24
3D printing enables separation of orthogonal functions within a hydrogel particle
Raman, R., Clay, N. E., Sen, S., Melhem, M. R., Qin, E. C., Kong, H., & Bashir, R. (2016) · Biomedical Microdevices · doi:10.1007/s10544-016-0068-9 · Cited by 21
Dwyer, S. F., & Gelman, I. H. (2014) · PubMed · Cited by 20
Automated measurement of fracture callus in radiographs using portable software
Porter, S. M., Dailey, H. L., Hollar, K. A., Klein, K., Harty, J. A., & Lujan, T. J. (2015) · Journal of Orthopaedic Research® · doi:10.1002/jor.23146 · Cited by 18
Patterning cellular compartments within TRACER cultures using sacrificial gelatin printing
Xu, B., Rodenhizer, D., Lakhani, S., Zhang, X., Soleas, J. P., Ailles, L., & McGuigan, A. P. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035018 · Cited by 15
Yuk, H., & Zhao, X. (2018) · Advanced Materials · doi:10.1002/adma.201870037 · Cited by 13
Horger, M., Ditt, H., Liao, S., Weisel, K. C., Fritz, J. M., Thaiss, W. M., Kaufmann, S., Nikolaou, K., & Kloth, C. (2017) · Academic Radiology · doi:10.1016/j.acra.2016.12.003 · Cited by 12
Organs by design: can bioprinting meet self-organization?
Martín, I., Malda, J., & Rivron, N. C. (2019) · Current Opinion in Organ Transplantation · doi:10.1097/mot.0000000000000679 · Cited by 10
Self-citationTYPICAL METHODS OF QUALITY CONTROL OF PLASTICIZERS
Wypych, G. (2017) · Elsevier eBooks · doi:10.1016/b978-1-895198-97-3.50005-6 · Cited by 8
Functionalizing With Bioactive Peptides to Generate Bio-Instructive Scaffolds
Mahzoon, S., Siahaan, T. J., & Detamore, M. S. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-803394-4.00002-1 · Cited by 5
Gu, Z., Gao, Z., Li, W., Wen, Y., & Gu, Q. (2019) · Materials · doi:10.3390/ma12233944 · Cited by 3
3D printing structures with a cell bearing gelatin bioink and transglutaminase crosslinking.
Irvine, S. A., Agrawal, A., Hoon, L. B., Yee, C. H., Yao, L. K., Chong, L. B., Marcelle, M., & Subbu, V. (2016) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/conf.fbioe.2016.01.01924 · Cited by 1
Research works printed but not linked: 5
- Chimene, 2020, Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies, Adv. Mater., 32, 1902026, 10.1002/adma.201902026 · DOI · Paper page
- Mezger, 2011, The Rheology Handbook
- Petta, 2018, Three-Dimensional Printing of a Tyramine Hyaluronan Derivative with Double Gelation Mechanism for Independent Tuning of Shear Thinning and Postprinting Curing, ACS Biomater. Sci. Eng., 4, 3088, 10.1021/acsbiomaterials.8b00416 · DOI
- Kiyotake, 2019, Development and Quantitative Characterization of the Precursor Rheology of Hyaluronic Acid Hydrogels for Bioprinting, Acta Biomater., 95, 176, 10.1016/j.actbio.2019.01.041 · DOI · Paper page
- 2015, ASTM52900-15, I.
Cited by
Self-Healing Injectable Hydrogels for Tissue Regeneration
Bertsch, P., Diba, M., Mooney, D. J., & Leeuwenburgh, S. C. G. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00179 · Cited by 892
“258,259 Printability is usually divided into the subcategories “extrud-ability”, “filament classification”, and “shape fidelity”.”
Rheological characterisation of ceramic inks for 3D direct ink writing: A review
del-Mazo-Barbara, L., & Ginebra, M.-P. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.08.031 · Cited by 444
3D-printed self-healing hydrogels via Digital Light Processing
Caprioli, M., Roppolo, I., Chiappone, A., Larush, L., Pirri, C. F., & Magdassi, S. (2021) · Nature Communications · doi:10.1038/s41467-021-22802-z · Cited by 335
Design and advanced manufacturing of electromagnetic interference shielding materials
Liu, J., Yu, M.-Y., Yu, Z.-Z., & Nicolosi, V. (2023) · Materials Today · doi:10.1016/j.mattod.2023.03.022 · Cited by 332
The rheology of direct and suspended extrusion bioprinting
Cooke, M. E., & Rosenzweig, D. H. (2021) · APL Bioengineering · doi:10.1063/5.0031475 · Cited by 284
Metadata
- Authors
- Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J.
- Affiliations
- AO Foundation (CH)
- Utrecht University (NL)
- Corresponding author
- Malda, Jos
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-08-28
- Volume
- 120
- Issue
- 19
- Pages
- 10850-10877
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- PMC
- PMC7564085
- OpenAlex
- W3082213210
- Cited by
- 1,359
- References
- 287
- Citations by year
- 2026: 305 · 2025: 283 · 2024: 280 · 2023: 202 · 2022: 176 · 2021: 107 · 2020: 6
- FWCI
- 10.29
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Chemical Reviews (publishedVersion, cc-by-nc-nd)
- PubMed Central (publishedVersion)
- PubMed (publishedVersion)
- University of Twente Research Information (publishedVersion, cc-by-nc-nd)
- HAL (submittedVersion)
- Utrecht University Repository (Utrecht University) (submittedVersion, other-oa)
- University of Twente Research Information (submittedVersion, cc-by-nc-nd)
- Funders
- AO Foundation (3D OC)
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek (024.003.013)
- ReumaNederland (LLP12, LLP22)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Keywords
- bioinks, 3D bioprinting, printability, shape fidelity, hydrogels, extrusion-based bioprinting, rheology, physicochemical parameters, prediction model
- MeSH terms
- Humans, Ink, Tissue Engineering, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.