Printability and Shape Fidelity of Bioinks in 3D Bioprinting
Open accessThe DOI matches its Crossref record; 285 of the 287 references it cites were found in a registry or an index, and 1 are not checked yet.
Abstract
Three-dimensional bioprinting uses additive manufacturing techniques for the automated fabrication of hierarchically organized living constructs. The building blocks are often hydrogel-based bioinks, which need to be printed into structures with high shape fidelity to the intended computer-aided design. For optimal cell performance, relatively soft and printable inks are preferred, although these undergo significant deformation during the printing process, which may impair shape fidelity. While the concept of good or poor printability seems rather intuitive, its quantitative definition lacks consensus and depends on multiple rheological and chemical parameters of the ink. This review discusses qualitative and quantitative methodologies to evaluate printability of bioinks for extrusion- and lithography-based bioprinting. The physicochemical parameters influencing shape fidelity are discussed, together with their importance in establishing new models, predictive tools and printing methods that are deemed instrumental for the design of next-generation bioinks, and for reproducible comparison of their structural performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures














Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [30]
The cited source says what the claim attributes to it.
In the citing paper
“However, the successful fabrication of stable 3D constructs relies on hydrogels with optimized rheological behavior, structural stability, and physicochemical properties that ensure printability and shape fidelity [7,8,9].”
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Self-citationHinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
Fibrinogen and fibrin structure and functions
MOSESSON, M. W. (2005) · Journal of Thrombosis and Haemostasis · doi:10.1111/j.1538-7836.2005.01365.x · Cited by 1,695
Bioinks for 3D bioprinting: an overview
Gungor-Ozkerim, P. S., Inci, I., Zhang, Y. S., Khademhosseini, A., & Dokmeci, M. R. (2018) · Biomaterials Science · doi:10.1039/c7bm00765e · Cited by 1,428
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Research works printed but not linked: 5
- Chimene, 2020, Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies, Adv. Mater., 32, 1902026, 10.1002/adma.201902026 · DOI · Paper page
- Mezger, 2011, The Rheology Handbook
- Petta, 2018, Three-Dimensional Printing of a Tyramine Hyaluronan Derivative with Double Gelation Mechanism for Independent Tuning of Shear Thinning and Postprinting Curing, ACS Biomater. Sci. Eng., 4, 3088, 10.1021/acsbiomaterials.8b00416 · DOI
- Kiyotake, 2019, Development and Quantitative Characterization of the Precursor Rheology of Hyaluronic Acid Hydrogels for Bioprinting, Acta Biomater., 95, 176, 10.1016/j.actbio.2019.01.041 · DOI · Paper page
- 2015, ASTM52900-15, I.
Cited by
Self-Healing Injectable Hydrogels for Tissue Regeneration
Bertsch, P., Diba, M., Mooney, D. J., & Leeuwenburgh, S. C. G. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00179 · Cited by 892
“258,259 Printability is usually divided into the subcategories “extrud-ability”, “filament classification”, and “shape fidelity”.”
Rheological characterisation of ceramic inks for 3D direct ink writing: A review
del-Mazo-Barbara, L., & Ginebra, M.-P. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.08.031 · Cited by 444
3D-printed self-healing hydrogels via Digital Light Processing
Caprioli, M., Roppolo, I., Chiappone, A., Larush, L., Pirri, C. F., & Magdassi, S. (2021) · Nature Communications · doi:10.1038/s41467-021-22802-z · Cited by 335
Design and advanced manufacturing of electromagnetic interference shielding materials
Liu, J., Yu, M.-Y., Yu, Z.-Z., & Nicolosi, V. (2023) · Materials Today · doi:10.1016/j.mattod.2023.03.022 · Cited by 332
The rheology of direct and suspended extrusion bioprinting
Cooke, M. E., & Rosenzweig, D. H. (2021) · APL Bioengineering · doi:10.1063/5.0031475 · Cited by 284
Bernal, P. N., Bouwmeester, M., Madrid‐Wolff, J., Falandt, M., Florczak, S., Rodriguez, N. G., Li, Y., Größbacher, G., Samsom, R., van Wolferen, M., et al. (2022) · Advanced Materials · doi:10.1002/adma.202110054 · Cited by 258
Self-citationPrintability–A key issue in extrusion-based bioprinting
Naghieh, S., & Chen, X. (2021) · Journal of Pharmaceutical Analysis · doi:10.1016/j.jpha.2021.02.001 · Cited by 270
Natural Hydrogel-Based Bio-Inks for 3D Bioprinting in Tissue Engineering: A Review
Fatimi, A., Okoro, O. V., Podstawczyk, D., Siminska-Stanny, J., & Shavandi, A. (2022) · Gels · doi:10.3390/gels8030179 · Cited by 276
“Moreover, printability is affected by the crosslinking mechanism, the surface tension, thermal conductivity and other rheological properties such as viscosity and yield stress [206].”
BackgroundInfluentialEngineering the multiscale complexity of vascular networks
O’Connor, C., Brady, E., Zheng, Y., Moore, E., & Stevens, K. R. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00447-8 · Cited by 271
Essential Guide to Hydrogel Rheology in Extrusion 3D Printing: How to Measure It and Why It Matters?
Herrada-Manchón, H., Fernández, M. A., & Aguilar, E. (2023) · Gels · doi:10.3390/gels9070517 · Cited by 227
“Subsequently, different hydrogel parameters, such as shear thinning behaviour, thixotropy, viscoelasticity, and the gelling mechanism or temperature, are fundamental, and a good understanding of the rheological properties is necessary to optimise the printing process and achieve the desired quality and accuracy of the…”
BackgroundMethodInfluentialA Review on the Adaption of Alginate-Gelatin Hydrogels for 3D Cultures and Bioprinting
Łabowska, M. B., Cierluk, K., Jankowska, A. M., Kulbacka, J., Detyna, J., & Michalak, I. (2021) · Materials · doi:10.3390/ma14040858 · Cited by 238
Self-Healing Hydrogels: Preparation, Mechanism and Advancement in Biomedical Applications
Devi V. K., A., Shyam, R., Palaniappan, A., Jaiswal, A. K., Oh, T.-H., & Nathanael, A. J. (2021) · Polymers · doi:10.3390/polym13213782 · Cited by 240
“Extrusion based 3D bioprinting relies on shear-thinning properties of hydrogels where the viscosity of the hydrogel reduces under an applied shear and could prevent sedimentation of cells [172,173].”
Background3D Bioprinting of Cell‐Laden Hydrogels for Improved Biological Functionality
Hull, S. M., Brunel, L. G., & Heilshorn, S. C. (2022) · Advanced Materials · doi:10.1002/adma.202103691 · Cited by 240
Biomaterials / bioinks and extrusion bioprinting
Chen, X. B., Fazel Anvari-Yazdi, A., Duan, X., Zimmerling, A., Gharraei, R., Sharma, N. K., Sweilem, S., & Ning, L. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.06.006 · Cited by 244
Insights on shear rheology of inks for extrusion-based 3D bioprinting
Amorim, P. A., d’Ávila, M. A., Anand, R., Moldenaers, P., Van Puyvelde, P., & Bloemen, V. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00129 · Cited by 230
Plant starch extraction, modification, and green applications: a review
Rashwan, A. K., Younis, H. A., Abdelshafy, A. M., Osman, A. I., Eletmany, M. R., Hafouda, M. A., & Chen, W. (2024) · Environmental Chemistry Letters · doi:10.1007/s10311-024-01753-z · Cited by 196
“…higher consumer acceptability, whereas steaming and blanching generally produced softer constructs with higher cooking losses, and microwaving resulted in significant hardness but less uniformity in texture and structure due to uneven heating (Schwab et al. 2020; Theagarajan et al. 2021).”
Bom, S., Ribeiro, R., Ribeiro, H. M., Santos, C., & Marto, J. (2022) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2022.121506 · Cited by 230
3D printing applications for healthcare research and development
Javaid, M., Haleem, A., Singh, R. P., & Suman, R. (2022) · Global Health Journal · doi:10.1016/j.glohj.2022.11.001 · Cited by 182
Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles
Choi, S., Lee, K. Y., Kim, S. L., MacQueen, L. A., Chang, H., Zimmerman, J. F., Jin, Q., Peters, M. M., Ardoña, H. A. M., Liu, X., et al. (2023) · Nature Materials · doi:10.1038/s41563-023-01611-3 · Cited by 212
Printability in extrusion bioprinting
Fu, Z., Naghieh, S., Xu, C., Wang, C., Sun, W., & Chen, X. (2021) · Biofabrication · doi:10.1088/1758-5090/abe7ab · Cited by 196
“In addition, cells have been reported to interfere with the crosslinking process [43] and reduce the crosslinking efficiency of a HRP/H 2 O 2 -mediated enzymatic crosslinking [44].”
Mirshafiei, M., Rashedi, H., Yazdian, F., Rahdar, A., & Baino, F. (2024) · Materials & Design · doi:10.1016/j.matdes.2024.112853 · Cited by 177
Wei, Q., Zhou, J., An, Y., Li, M., Zhang, J., & Yang, S. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123450 · Cited by 184
Light-based vat-polymerization bioprinting
Levato, R., Dudaryeva, O., Garciamendez-Mijares, C. E., Kirkpatrick, B. E., Rizzo, R., Schimelman, J., Anseth, K. S., Chen, S., Zenobi-Wong, M., & Zhang, Y. S. (2023) · Nature Reviews Methods Primers · doi:10.1038/s43586-023-00231-0 · Cited by 176
“In all light-based vat-polymerization techniques, printability and resolution are intimately dependent on the kinetics of the photocrosslinking reaction and therefore unique for each bioresin formulation 84 .”
Self-citationPolymeric biomaterials for 3D printing in medicine: An overview
Pugliese, R., Beltrami, B., Regondi, S., & Lunetta, C. (2021) · Annals of 3D Printed Medicine · doi:10.1016/j.stlm.2021.100011 · Cited by 176
Go with the flow: Rheological requirements for direct ink write printability
Wei, P., Cipriani, C., Hsieh, C.-M., Kamani, K., Rogers, S., & Pentzer, E. (2023) · Journal of Applied Physics · doi:10.1063/5.0155896 · Cited by 171
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
Xue, X., Zhang, H., Liu, H., Wang, S., Li, J., Zhou, Q., Chen, X., Ren, X., Jing, Y., Deng, Y., et al. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202202470 · Cited by 171
Application of 3D bioprinting in the prevention and the therapy for human diseases
Yi, H.-G., Kim, H., Kwon, J., Choi, Y.-J., Jang, J., & Cho, D.-W. (2021) · Signal Transduction and Targeted Therapy · doi:10.1038/s41392-021-00566-8 · Cited by 164
“In recent tissue engineering investigations, the materials used in 3D bioprinting of tissues, organs, and therapeutic products are categorized into (1) biomaterial inks and (2) bioinks, depending on whether cells are encapsulated.(33) In this section, we discuss biomaterial inks and hydrogels applicable to formulate b…”
BackgroundWu, Y., Zeng, Y., Chen, Y., Li, C., Qiu, R., & Liu, W. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202107202 · Cited by 170
Advances in bioactive glass-containing injectable hydrogel biomaterials for tissue regeneration
Zeimaran, E., Pourshahrestani, S., Fathi, A., Razak, N. A. B. A., Kadri, N. A., Sheikhi, A., & Baino, F. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.09.034 · Cited by 167
3D Printing of Microgel Scaffolds with Tunable Void Fraction to Promote Cell Infiltration
Seymour, A. J., Shin, S., & Heilshorn, S. C. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202100644 · Cited by 164
Wychowaniec, J. K., Saini, H., Scheibe, B., Dubal, D. P., Schneemann, A., & Jayaramulu, K. (2022) · Chemical Society Reviews · doi:10.1039/d2cs00585a · Cited by 158
Rheology as a Tool for Fine-Tuning the Properties of Printable Bioinspired Gels
Bercea, M. (2023) · Molecules · doi:10.3390/molecules28062766 · Cited by 162
“once it is deposited, and thus avoid the structure collapsing after 3D printing [67,99,100,103,104][67,99,100,103,104].”
BackgroundInfluentialWang, M., Li, W., Hao, J., Gonzales, A. A., Zhao, Z., Flores, R. S., Kuang, X., Mu, X., Ching, T., Tang, G., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-31002-2 · Cited by 168
3D Bioprinting of Neural Tissues
Cadena, M., Ning, L., King, A. T., Hwang, B., Jin, L., Serpooshan, V., & Sloan, S. A. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202001600 · Cited by 158
Bioinks and Bioprinting Strategies for Skeletal Muscle Tissue Engineering
Samandari, M., Quint, J. P., Rodríguez‐delaRosa, A., Sinha, I., Pourquié, O., & Tamayol, A. (2021) · Advanced Materials · doi:10.1002/adma.202105883 · Cited by 156
hadad, A. A. E., Rosa-Sainz, A., Cañete, R., Peralta, E., Begines, B., Balbuena, M., Alcudia, A., & Torres, Y. (2023) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2023.100760 · Cited by 156
Design aspects and characterization of hydrogel-based bioinks for extrusion-based bioprinting
Karvinen, J., & Kellomäki, M. (2023) · Bioprinting · doi:10.1016/j.bprint.2023.e00274 · Cited by 144
3D bioprinting and photocrosslinking: emerging strategies & future perspectives
Zennifer, A., Manivannan, S., Sethuraman, S., Kumbar, S. G., & Sundaramurthi, D. (2021) · Biomaterials Advances · doi:10.1016/j.msec.2021.112576 · Cited by 147
Duraj‐Thatte, A., Manjula‐Basavanna, A., Rutledge, J., Xia, J., Hassan, S., Sourlis, A., Rubio, A. G., Lesha, A., Zenkl, M., Kan, A., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-26791-x · Cited by 142
Granular Hydrogels in Biofabrication: Recent Advances and Future Perspectives
Daly, A. C. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202301388 · Cited by 145
Advanced Strategies for 3D Bioprinting of Tissue and Organ Analogs Using Alginate Hydrogel Bioinks
Gao, Q., Kim, B.-S., & Gao, G. (2021) · Marine Drugs · doi:10.3390/md19120708 · Cited by 140
“Printability refers to the ability of a bioink to form and maintain reproducible 3D constructs using a 3D bioprinting technique [57].”
BackgroundApplication of Machine Learning in 3D Bioprinting: Focus on Development of Big Data and Digital Twin
An, J., Chua, C. K., & Mironov, V. (2021) · International Journal of Bioprinting · doi:10.18063/ijb.v7i1.342 · Cited by 130
Machine Learning in Predicting Printable Biomaterial Formulations for Direct Ink Writing
Chen, H., Liu, Y., Balabani, S., Hirayama, R., & Huang, J. (2023) · Research · doi:10.34133/research.0197 · Cited by 147
“Several methods have been raised to assess the printability of hydrogels qualitatively [38,39] or quantitatively [35,40], but there is no consensus on the quantitative assessment [41].”
Optimized Photoclick (Bio)Resins for Fast Volumetric Bioprinting
Rizzo, R., Rütsche, D., Liu, H., & Zenobi‐Wong, M. (2021) · Advanced Materials · doi:10.1002/adma.202102900 · Cited by 131
Levi, S., Yen, F.-C., Baruch, L., & Machluf, M. (2022) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2022.05.011 · Cited by 129
Rheology in Product Development: An Insight into 3D Printing of Hydrogels and Aerogels
Barrulas, R. V., & Corvo, M. C. (2023) · Gels · doi:10.3390/gels9120986 · Cited by 132
“Furthermore, the hybrid hydrogels must recover their gel-like behaviour spontaneously after deposition on the substrate [67].”
BackgroundZhu, H., Monavari, M., Zheng, K., Distler, T., Ouyang, L., Heid, S., Jin, Z., He, J., Li, D., & Boccaccini, A. R. (2022) · Small · doi:10.1002/smll.202104996 · Cited by 129
Calafel, I., Criado‐Gonzalez, M., Aguirresarobe, R., Fernández, M., & Mijangos, C. (2025) · Materials Advances · doi:10.1039/d5ma00019j · Cited by 130
AI-driven 3D bioprinting for regenerative medicine: From bench to bedside
Zhang, Z., Zhou, X., Fang, Y., Xiong, Z., & Zhang, T. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.11.021 · Cited by 150
Fang, Y., Guo, Y., Ji, M., Li, B., Guo, Y., Zhu, J., Zhang, T., & Xiong, Z. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202109810 · Cited by 126
Mahendiran, B., Muthusamy, S., Sampath, S., Jaisankar, S. N., Popat, K. C., Selvakumar, R., & Krishnakumar, G. S. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.04.179 · Cited by 126
Controlling Light in Scattering Materials for Volumetric Additive Manufacturing
Madrid-Wolff, J. A., Boniface, A., Loterie, D., Delrot, P., & Moser, C. (2022) · Advanced Science · doi:10.1002/advs.202105144 · Cited by 122
Bucciarelli, A., & Motta, A. (2022) · Biomaterials Advances · doi:10.1016/j.bioadv.2022.212982 · Cited by 129
Chen, B., Dong, J., Ruelas, M., Ye, X., He, J., Yao, R., Fu, Y., Liu, Y., Hu, J., Wu, T., et al. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202201843 · Cited by 122
Varaprasad, K., Karthikeyan, C., Yallapu, M. M., & Sadiku, E. R. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.05.157 · Cited by 122
Additive manufacturing in the biomedical field-recent research developments
Tom, T., Sreenilayam, S. P., Brabazon, D., Jose, J. P., Joseph, B., Kailasnath, M., & Thomas, S. (2022) · Results in Engineering · doi:10.1016/j.rineng.2022.100661 · Cited by 116
In Vitro Strategies to Vascularize 3D Physiologically Relevant Models
Dellaquila, A., Le Bao, C., Letourneur, D., & Simon‐Yarza, T. (2021) · Advanced Science · doi:10.1002/advs.202100798 · Cited by 115
Alginate based hydrogel inks for 3D bioprinting of engineered orthopedic tissues
Murab, S., Gupta, A., Włodarczyk‐Biegun, M. K., Kumar, A., van Rijn, P., Whitlock, P. W., Han, S. S., & Agrawal, G. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119964 · Cited by 115
Outrequin, T. C. R., Gamonpilas, C., Siriwatwechakul, W., & Sreearunothai, P. (2023) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2022.111371 · Cited by 113
Díaz‐Payno, P. J., Kalogeropoulou, M., Muntz, I., Kingma, E., Kops, N., D’Este, M., Koenderink, G. H., Fratila-Apachitei, L. E., van Osch, G. J. V. M., & ZADPOOR, A. A. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202201891 · Cited by 115
Self-citation3D Printing of Self‐Healing Materials
Roppolo, I., Caprioli, M., Pirri, C. F., & Magdassi, S. (2023) · Advanced Materials · doi:10.1002/adma.202305537 · Cited by 117
Jia, L., Hua, Y., Zeng, J., Liu, W., Wang, D., Zhou, G., Liu, X., & Jiang, H. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.02.032 · Cited by 109
Engineered assistive materials for 3D bioprinting: support baths and sacrificial inks
Brunel, L. G., Hull, S. M., & Heilshorn, S. C. (2022) · Biofabrication · doi:10.1088/1758-5090/ac6bbe · Cited by 115
“The rheological properties of a material affect its printability, defined here as its ability to be extruded into continuous filaments that maintain their shape fidelity [21].”
Dai, W., Zhang, L., Yu, Y., Yan, W., Zhao, F., Fan, Y., Cao, C., Cai, Q., Hu, X., & Ao, Y. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202200710 · Cited by 106
Advanced 3D imaging and organoid bioprinting for biomedical research and therapeutic applications
Maharjan, S., Ma, C., Singh, B., Kang, H., Orive, G., Yao, J., & Zhang, Y. S. (2024) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2024.115237 · Cited by 114
Emerging Bioprinting for Wound Healing
Wang, Z., Liang, X. M., Wang, G., Wang, X., & Chen, Y. (2023) · Advanced Materials · doi:10.1002/adma.202304738 · Cited by 125
Lee, S. J., Jeong, W., & Atala, A. (2024) · Advanced Materials · doi:10.1002/adma.202408032 · Cited by 116
Sadraei, A., & Naghib, S. M. (2024) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2024.2427184 · Cited by 117
Cholesteric cellulose liquid crystal ink for three-dimensional structural coloration
Zhang, Z., Wang, C., Wang, Q., Zhao, Y., & Shang, L. (2022) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2204113119 · Cited by 104
Das, S., Jegadeesan, J. T., & Basu, B. (2024) · Biomacromolecules · doi:10.1021/acs.biomac.3c01271 · Cited by 115
Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends
Tong, A., Pham, Q. L., Abatemarco, P., Mathew, A., Gupta, D., Iyer, S., & Voronov, R. S. (2021) · SLAS TECHNOLOGY · doi:10.1177/24726303211020297 · Cited by 104
Boularaoui, S. M., Shanti, A., Lanotte, M., Luo, S., Bawazir, S. S., Lee, S., Christoforou, N., Khan, K. A., & Stefanini, C. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c01193 · Cited by 108
Strategies for improving the 3D printability of decellularized extracellular matrix bioink
Zhang, H., Wang, Y., Zheng, Z., Wei, X., Chen, L., Wu, Y., Huang, W., & Yang, L. (2023) · Theranostics · doi:10.7150/thno.81785 · Cited by 113
“Hence, bioink should be able to print with high shape fidelity and support cell function (the concept of the biofabrication window) [21].”
BackgroundInfluentialPushing the rheological and mechanical boundaries of extrusion-based 3D bioprinting
Ouyang, L. (2022) · Trends in biotechnology · doi:10.1016/j.tibtech.2022.01.001 · Cited by 100
Polysaccharide 3D Printing for Drug Delivery Applications
Zamboulis, A., Michailidou, G., Koumentakou, I., & Bikiaris, D. Ν. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14010145 · Cited by 103
“After printing, the materials must undergo rapid gelation in order to avoid altering the printed construct [65,66].”
Method3D Bioprinting with Live Cells
Persaud, A., Maus, A., Strait, L., & Zhu, D. (2022) · Engineered Regeneration · doi:10.1016/j.engreg.2022.07.002 · Cited by 100
Mörö, A., Samanta, S., Honkamäki, L., Rangasami, V. K., Puistola, P., Kauppila, M., Narkilahti, S., Miettinen, S., Oommen, O. P., & Skottman, H. (2022) · Biofabrication · doi:10.1088/1758-5090/acab34 · Cited by 104
“Hydrogel precursors with the ability to be extruded through a small-sized nozzle and subsequently forming shape-stable gels are suitable bioink components for extrusion-based printing [3].”
BackgroundInfluentialCarpio, M. B., Dabaghi, M., Ungureanu, J., Kolb, M. R. J., Hirota, J. A., & Moran-Mirabal, J. M. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.773511 · Cited by 101
“Typically, the conditions that lead to better printing properties lead to worse viability and biological performance of the printed cells, leaving a small window for 3D printing of bioinks containing cells (Schwab et al., 2020).”
BackgroundMethodInfluentialThe translational paradigm of nanobiomaterials: Biological chemistry to modern applications
Sinha, A., Simnani, F. Z., Singh, D., Nandi, A., Choudhury, A., Patel, P., Jha, E., Chouhan, R. S., Kaushik, N. K., Mishra, Y. K., et al. (2022) · Materials Today Bio · doi:10.1016/j.mtbio.2022.100463 · Cited by 99
Im, S., Choe, G., Seok, J. M., Yeo, S. J., Lee, J. H., Kim, W. D., Lee, J. Y., & Park, S. A. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.02.012 · Cited by 98
Ribezzi, D., Gueye, M., Florczak, S., Dusi, F., de Vos, D., Manente, F., Hierholzer, A., Fussenegger, M., Caiazzo, M., Blunk, T., et al. (2023) · Advanced Materials · doi:10.1002/adma.202301673 · Cited by 101
Self-citation3D printed alginate-cellulose nanofibers based patches for local curcumin administration
Olmos‐Juste, R., Alonso-Lerma, B., Pérez‐Jiménez, R., Gabilondo, N., & Eceiza, A. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118026 · Cited by 99
Recent advances in the 3D printing of electrically conductive hydrogels for flexible electronics
Yang, R., Chen, X., Zheng, Y., Chen, K., Zeng, W., & Wu, X. (2022) · Journal of Materials Chemistry C · doi:10.1039/d1tc06162c · Cited by 98
Complex 3D bioprinting methods
Ji, S., & Güvendiren, M. (2021) · APL Bioengineering · doi:10.1063/5.0034901 · Cited by 100
Engineered Living Materials for Advanced Diseases Therapy
Xue, D. Q., Wu, W. H., Pan, P., & Zhang, X. (2023) · Advanced Materials · doi:10.1002/adma.202304963 · Cited by 102
4D printed shape-shifting biomaterials for tissue engineering and regenerative medicine applications
Kalogeropoulou, M., Díaz‐Payno, P. J., Mirzaali, M. J., van Osch, G. J. V. M., Fratila-Apachitei, L. E., & ZADPOOR, A. A. (2024) · Biofabrication · doi:10.1088/1758-5090/ad1e6f · Cited by 105
“To date, the majority of the bioinks presented in the literature are hydrogel precursors, which often need to be cross-linked either during or after the scaffold fabrication [58].”
BackgroundZhang, X., Zhang, H., Zhang, Y., Huangfu, H., Yang, Y., Qin, Q., Zhang, Y., & Zhou, Y. (2023) · Journal of Materials Chemistry B · doi:10.1039/d2tb01979e · Cited by 92
3D-Printed Hydrogel for Diverse Applications: A Review
Agrawal, A., & Hussain, C. M. (2023) · Gels · doi:10.3390/gels9120960 · Cited by 93
Levato, R., Lim, K. S., Li, W., Urigoitia-Asua, A., Peña, L. B., Wang, M., Falandt, M., Bernal, P. N., Gawlitta, D., Zhang, Y. S., et al. (2021) · Materials Today Bio · doi:10.1016/j.mtbio.2021.100162 · Cited by 95
Self-citationAdvances in 3D bioprinting for regenerative medicine applications
Loukelis, K., Koutsomarkos, N., Mikos, A. G., & Chatzinikolaidou, Μ. (2024) · Regenerative Biomaterials · doi:10.1093/rb/rbae033 · Cited by 100
Multifunctional Conductive Hydrogel Interface for Bioelectronic Recording and Stimulation
Tang, H., Li, Y., Liao, S., Liu, H., Qiao, Y., & Zhou, J. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202400562 · Cited by 96
Algal polysaccharides for 3D printing: A review
Mandal, S., Nagi, G. K., Corcoran, A. A., Agrawal, R., Dubey, M. K., & Hunt, R. W. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.120267 · Cited by 95
Mu, R., Wang, B., Lv, W., Yu, J., & Li, G. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.120293 · Cited by 90
Dutta, S. D., Ganguly, K., Randhawa, A., Patil, T. V., Patel, D. K., & Lim, K. (2023) · Biomaterials · doi:10.1016/j.biomaterials.2023.121999 · Cited by 94
Agarwal, T., Chiesa, I., Costantini, M., Lapomarda, A., Tirelli, M. C., Borra, O. P., Varshapally, S. V. S., Kumar, Y. A. V., Reddy, G. K., Maria, C. D., et al. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.125669 · Cited by 91
Construction of tumor organoids and their application to cancer research and therapy
Lv, J., Du, X., Wang, M., Su, J., Wei, Y., & Xu, C. (2024) · Theranostics · doi:10.7150/thno.91362 · Cited by 93
“As a suitable chamber for cells to survive, hydrogels are typically characterized by low elastic modulus and high compatibility with cell-driven remodeling [93].”
BackgroundHigh-throughput bioprinting of spheroids for scalable tissue fabrication
Kim, M. H., Singh, Y. P., Celik, N., Yeo, M., Rizk, E. B., Hayes, D. J., & Ozbolat, I. T. (2024) · Nature Communications · doi:10.1038/s41467-024-54504-7 · Cited by 90
Moud, A. A. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.09.148 · Cited by 88
Alqutaibi, A. Y., Alghauli, M. A., Aljohani, M., & Zafar, M. S. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00356 · Cited by 88
Metadata
- Authors
- Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J.
- Affiliations
- AO Foundation (CH)
- Utrecht University (NL)
- Corresponding author
- Malda, Jos
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-08-28
- Volume
- 120
- Issue
- 19
- Pages
- 10850-10877
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- PMC
- PMC7564085
- OpenAlex
- W3082213210
- Cited by
- 1,359
- References
- 287
- Citations by year
- 2026: 305 · 2025: 283 · 2024: 280 · 2023: 202 · 2022: 176 · 2021: 107 · 2020: 6
- FWCI
- 10.29
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Chemical Reviews (publishedVersion, cc-by-nc-nd)
- PubMed Central (publishedVersion)
- PubMed (publishedVersion)
- University of Twente Research Information (publishedVersion, cc-by-nc-nd)
- HAL (submittedVersion)
- Utrecht University Repository (Utrecht University) (submittedVersion, other-oa)
- University of Twente Research Information (submittedVersion, cc-by-nc-nd)
- Funders
- AO Foundation (3D OC)
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek (024.003.013)
- ReumaNederland (LLP12, LLP22)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Keywords
- bioinks, 3D bioprinting, printability, shape fidelity, hydrogels, extrusion-based bioprinting, rheology, physicochemical parameters, prediction model
- MeSH terms
- Humans, Ink, Tissue Engineering, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.